If a function is set to be traced by the set_graph_function, but the
option funcgraph-irqs is zero, and the traced function happens to be
called from a interrupt, it will not be traced.

The point of funcgraph-irqs is to not trace interrupts when we are
preempted by an irq, not to not trace functions we want to trace that
happen to be *in* a irq.

Luckily the current->trace_recursion element is perfect to add a flag
to help us be able to trace functions within an interrupt even when
we are not tracing interrupts that preempt the trace.
Reported-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Tested-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Fix to support kernel stack trace correctly on kprobe-tracer.
Since the execution path of kprobe-based dynamic events is different
from other tracepoint-based events, normal ftrace_trace_stack() doesn't
work correctly. To fix that, this introduces ftrace_trace_stack_regs()
which traces stack via pt_regs instead of current stack register.

e.g.

 # echo p schedule+4 > /sys/kernel/debug/tracing/kprobe_events
 # echo 1 > /sys/kernel/debug/tracing/options/stacktrace
 # echo 1 > /sys/kernel/debug/tracing/events/kprobes/enable
 # head -n 20 /sys/kernel/debug/tracing/trace
            bash-2968  [000] 10297.050245: p_schedule_4: (schedule+0x4/0x4ca)
            bash-2968  [000] 10297.050247: <stack trace>
 => schedule_timeout
 => n_tty_read
 => tty_read
 => vfs_read
 => sys_read
 => system_call_fastpath
     kworker/0:1-2940  [000] 10297.050265: p_schedule_4: (schedule+0x4/0x4ca)
     kworker/0:1-2940  [000] 10297.050266: <stack trace>
 => worker_thread
 => kthread
 => kernel_thread_helper
            sshd-1132  [000] 10297.050365: p_schedule_4: (schedule+0x4/0x4ca)
            sshd-1132  [000] 10297.050365: <stack trace>
 => sysret_careful

Note: Even with this fix, the first entry will be skipped
if the probe is put on the function entry area before
the frame pointer is set up (usually, that is 4 bytes
 (push %bp; mov %sp %bp) on x86), because stack unwinder
depends on the frame pointer.
Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: yrl.pp-manager.tt@hitachi.com
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@gmail.com>
Link: http://lkml.kernel.org/r/20110608070934.17777.17116.stgit@fedora15Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Add a trace option to disable tracing on free. When this option is
set, a write into the free_buffer file will not only shrink the
ring buffer down to zero, but it will also disable tracing.

Cc: Vaibhav Nagarnaik <vnagarnaik@google.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Witold reported a reboot caused by the selftests of the dynamic function
tracer. He sent me a config and I used ktest to do a config_bisect on it
(as my config did not cause the crash). It pointed out that the problem
config was CONFIG_PROVE_RCU.

What happened was that if multiple callbacks are attached to the
function tracer, we iterate a list of callbacks. Because the list is
managed by synchronize_sched() and preempt_disable, the access to the
pointers uses rcu_dereference_raw().

When PROVE_RCU is enabled, the rcu_dereference_raw() calls some
debugging functions, which happen to be traced. The tracing of the debug
function would then call rcu_dereference_raw() which would then call the
debug function and then... well you get the idea.

I first wrote two different patches to solve this bug.

1) add a __rcu_dereference_raw() that would not do any checks.
2) add notrace to the offending debug functions.

Both of these patches worked.

Talking with Paul McKenney on IRC, he suggested to add recursion
detection instead. This seemed to be a better solution, so I decided to
implement it. As the task_struct already has a trace_recursion to detect
recursion in the ring buffer, and that has a very small number it
allows, I decided to use that same variable to add flags that can detect
the recursion inside the infrastructure of the function tracer.

I plan to change it so that the task struct bit can be checked in
mcount, but as that requires changes to all archs, I will hold that off
to the next merge window.

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1306348063.1465.116.camel@gandalf.stny.rr.comReported-by: NWitold Baryluk <baryluk@smp.if.uj.edu.pl>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Add some basic sanity tests for multiple users of the function
tracer at startup.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Move elements in struct tracer for better alignment.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Add an "overwrite" trace_option for ftrace to control whether the buffer should
be overwritten on overflow or not. The default remains to overwrite old events
when the buffer is full. This patch adds the option to instead discard newest
events when the buffer is full. This is useful to get a snapshot of traces just
after enabling traces. Dropping the current event is also a simpler code path.
Signed-off-by: NDavid Sharp <dhsharp@google.com>
LKML-Reference: <1291844807-15481-1-git-send-email-dhsharp@google.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Now that the filter logic does not require to save the pred results
on the stack, we can increase the max number of preds we allow.
As the preds are index by a short value, and we use the MSBs as flags
we can increase the max preds to 2^14 (16384) which should be way
more than enough.

Cc: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The MAX_FILTER_PRED is only needed by the kernel/trace/*.c files.
Move it to kernel/trace/trace.h.

Cc: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

There are many cases that a filter will contain multiple ORs or
ANDs together near the leafs. Walking up and down the tree to get
to the next compare can be a waste.

If there are several ORs or ANDs together, fold them into a single
pred and allocate an array of the conditions that they check.
This will speed up the filter by linearly walking an array
and can still break out if a short circuit condition is met.

Cc: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Currently the filter_match_preds() requires a stack to push
and pop the preds to determine if the filter matches the record or not.
This has two drawbacks:

1) It requires a stack to store state information. As this is done
   in fast paths we can't allocate the storage for this stack, and
   we can't use a global as it must be re-entrant. The stack is stored
   on the kernel stack and this greatly limits how many preds we
   may allow.

2) All conditions are calculated even when a short circuit exists.
   a || b  will always calculate a and b even though a was determined
   to be true.

Using a tree we can walk a constant structure that will save
the state as we go. The algorithm is simply:

  pred = root;
  do {
	switch (move) {
	case MOVE_DOWN:
		if (OR or AND) {
			pred = left;
			continue;
		}
		if (pred == root)
			break;
		match = pred->fn();
		pred = pred->parent;
		move = left child ? MOVE_UP_FROM_LEFT : MOVE_UP_FROM_RIGHT;
		continue;

	case MOVE_UP_FROM_LEFT:
		/* Only OR or AND can be a parent */
		if (match && OR || !match && AND) {
			/* short circuit */
			if (pred == root)
				break;
			pred = pred->parent;
			move = left child ?
				MOVE_UP_FROM_LEFT :
				MOVE_UP_FROM_RIGHT;
			continue;
		}
		pred = pred->right;
		move = MOVE_DOWN;
		continue;

	case MOVE_UP_FROM_RIGHT:
		if (pred == root)
			break;
		pred = pred->parent;
		move = left child ? MOVE_UP_FROM_LEFT : MOVE_UP_FROM_RIGHT;
		continue;
	}
	done = 1;
  } while (!done);

This way there's no strict limit to how many preds we allow
and it also will short circuit the logical operations when possible.

Cc: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Currently we allocate an array of pointers to filter_preds, and then
allocate a separate filter_pred for each item in the array.
This adds slight overhead in the filters as it needs to derefernce
twice to get to the op condition.

Allocating the preds themselves in a single array removes a dereference
as well as helps on the cache footprint.

Cc: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

For every filter that is made, we create predicates to hold every
operation within the filter. We have a max of 32 predicates that we
can hold. Currently, we allocate all 32 even if we only need to
use one.

Part of the reason we do this is that the filter can be used at
any moment by any event. Fortunately, the filter is only used
with preemption disabled. By reseting the count of preds used "n_preds"
to zero, then performing a synchronize_sched(), we can safely
free and reallocate a new array of preds.

Cc: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The ops OR and AND act different from the other ops, as they
are the only ones to take other ops as their arguements.
These ops als change the logic of the filter_match_preds.

By removing the OR and AND fn's we can also remove the val1 and val2
that is passed to all other fn's and are unused.

Cc: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Move trace_graph_function() and print_graph_headers_flags() functions
to the trace_function_graph.c to be globaly available.
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
LKML-Reference: <1285243253-7372-3-git-send-email-jolsa@redhat.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Add in a helper function to allow the kdb shell to dump the ftrace
buffer.

Modify trace.c to expose the capability to iterate over the ftrace
buffer in a read only capacity.
Signed-off-by: NJason Wessel <jason.wessel@windriver.com>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
CC: Frederic Weisbecker <fweisbec@gmail.com>

Documentation/trace/ftrace.txt says

  buffer_size_kb:

        This sets or displays the number of kilobytes each CPU
        buffer can hold. The tracer buffers are the same size
        for each CPU. The displayed number is the size of the
        CPU buffer and not total size of all buffers. The
        trace buffers are allocated in pages (blocks of memory
        that the kernel uses for allocation, usually 4 KB in size).
        If the last page allocated has room for more bytes
        than requested, the rest of the page will be used,
        making the actual allocation bigger than requested.
        ( Note, the size may not be a multiple of the page size
          due to buffer management overhead. )

        This can only be updated when the current_tracer
        is set to "nop".

But it's incorrect. currently total memory consumption is
'buffer_size_kb x CPUs x 2'.

Why two times difference is there? because ftrace implicitly allocate
the buffer for max latency too.

That makes sad result when admin want to use large buffer. (If admin
want full logging and makes detail analysis). example, If admin
have 24 CPUs machine and write 200MB to buffer_size_kb, the system
consume ~10GB memory (200MB x 24 x 2). umm.. 5GB memory waste is
usually unacceptable.

Fortunatelly, almost all users don't use max latency feature.
The max latency buffer can be disabled easily.

This patch shrink buffer size of the max latency buffer if
unnecessary.
Signed-off-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
LKML-Reference: <20100701104554.DA2D.A69D9226@jp.fujitsu.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

We found that even enabling a single trace event that will rarely be
triggered can add big overhead to context switch.

(lmbench context switch test)
 -------------------------------------------------
 2p/0K 2p/16K 2p/64K 8p/16K 8p/64K 16p/16K 16p/64K
 ctxsw  ctxsw  ctxsw ctxsw  ctxsw   ctxsw   ctxsw
------ ------ ------ ------ ------ ------- -------
  2.19   2.3   2.21   2.56   2.13     2.54    2.07
  2.39   2.51  2.35   2.75   2.27     2.81    2.24

The overhead is 6% ~ 11%.

It's because when a trace event is enabled 3 tracepoints (sched_switch,
sched_wakeup, sched_wakeup_new) will be activated to map pid to cmdname.

We'd like to avoid this overhead, so add a trace option '(no)record-cmd'
to allow to disable cmdline recording.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4C2D57F4.2050204@cn.fujitsu.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Special traces type was only used by sysprof. Lets remove it now
that sysprof ftrace plugin has been dropped.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Acked-by: NSoeren Sandmann <sandmann@daimi.au.dk>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>

The sysprof ftrace plugin doesn't seem to be seriously used
somewhere. There is a branch in the sysprof tree that makes
an interface to it, but the real sysprof tool uses either its
own module or perf events.

Drop the sysprof ftrace plugin then, as it's mostly useless.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Acked-by: NSoeren Sandmann <sandmann@daimi.au.dk>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>

The ksym (breakpoint) ftrace plugin has been superseded by perf
tools that are much more poweful to use the cpu breakpoints.
This tracer doesn't bring more feature. It has been deprecated
for a while now, lets remove it.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Prasad <prasad@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>

Every event has the same common fields, so it's a big waste of
memory to have a copy of those fields for every event.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4BFA3759.30105@cn.fujitsu.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

We have been resisting new ftrace plugins and removing existing
ones, and kmemtrace has been superseded by kmem trace events
and perf-kmem, so we remove it.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Acked-by: NPekka Enberg <penberg@cs.helsinki.fi>
Acked-by: NEduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
[ remove kmemtrace from the makefile, handle slob too ]
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>

The boot tracer is useless. It simply logs the initcalls
but in fact these initcalls are also logged through printk
while using the initcall_debug kernel parameter.

Nobody seem to be using it so far. Then just remove it.
Signed-off-by: NWANG Cong <xiyou.wangcong@gmail.com>
Cc: Chase Douglas <chase.douglas@canonical.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <20100526105753.GA5677@cr0.nay.redhat.com>
[ remove the hooks in main.c, and the headers ]
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>

The ftrace_preempt_disable/enable functions were to address a
recursive race caused by the function tracer. The function tracer
traces all functions which makes it easily susceptible to recursion.
One area was preempt_enable(). This would call the scheduler and
the schedulre would call the function tracer and loop.
(So was it thought).

The ftrace_preempt_disable/enable was made to protect against recursion
inside the scheduler by storing the NEED_RESCHED flag. If it was
set before the ftrace_preempt_disable() it would not call schedule
on ftrace_preempt_enable(), thinking that if it was set before then
it would have already scheduled unless it was already in the scheduler.

This worked fine except in the case of SMP, where another task would set
the NEED_RESCHED flag for a task on another CPU, and then kick off an
IPI to trigger it. This could cause the NEED_RESCHED to be saved at
ftrace_preempt_disable() but the IPI to arrive in the the preempt
disabled section. The ftrace_preempt_enable() would not call the scheduler
because the flag was already set before entring the section.

This bug would cause a missed preemption check and cause lower latencies.

Investigating further, I found that the recusion caused by the function
tracer was not due to schedule(), but due to preempt_schedule(). Now
that preempt_schedule is completely annotated with notrace, the recusion
no longer is an issue.
Reported-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

ftrace_trace_stack() and frace_trace_userstacke() take a
struct ring_buffer argument, not struct trace_array. Commit
e77405ad("tracing: pass around ring buffer instead of tracer")
made this change.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4BE77C14.5010806@cn.fujitsu.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The filter_active and enable both use an int (4 bytes each) to
set a single flag. We can save 4 bytes per event by combining the
two into a single integer.

   text	   data	    bss	    dec	    hex	filename
4913961	1088356	 861512	6863829	 68bbd5	vmlinux.orig
4894944	1018052	 861512	6774508	 675eec	vmlinux.id
4894871	1012292	 861512	6768675	 674823	vmlinux.flags

This gives us another 5K in savings.

The modification of both the enable and filter fields are done
under the event_mutex, so it is still safe to combine the two.

Note: Although Mathieu gave his Acked-by, he would like it documented
 that the reads of flags are not protected by the mutex. The way the
 code works, these reads will not break anything, but will have a
 residual effect. Since this behavior is the same even before this
 patch, describing this situation is left to another patch, as this
 patch does not change the behavior, but just brought it to Mathieu's
 attention.

v2: Updated the event trace self test to for this change.
Acked-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: NMasami Hiramatsu <mhiramat@redhat.com>
Acked-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Move the defined fields from the event to the class structure.
Since the fields of the event are defined by the class they belong
to, it makes sense to have the class hold the information instead
of the individual events. The events of the same class would just
hold duplicate information.

After this change the size of the kernel dropped another 3K:

   text	   data	    bss	    dec	    hex	filename
4913961	1088356	 861512	6863829	 68bbd5	vmlinux.orig
4900252	1057412	 861512	6819176	 680d68	vmlinux.regs
4900375	1053380	 861512	6815267	 67fe23	vmlinux.fields

Although the text increased, this was mainly due to the C files
having to adapt to the change. This is a constant increase, where
new tracepoints will not increase the Text. But the big drop is
in the data size (as well as needed allocations to hold the fields).
This will give even more savings as more tracepoints are created.

Note, if just TRACE_EVENT()s are used and not DECLARE_EVENT_CLASS()
with several DEFINE_EVENT()s, then the savings will be lost. But
we are pushing developers to consolidate events with DEFINE_EVENT()
so this should not be an issue.

The kprobes define a unique class to every new event, but are dynamic
so it should not be a issue.

The syscalls however have a single class but the fields for the individual
events are different. The syscalls use a metadata to define the
fields. I moved the fields list from the event to the metadata and
added a "get_fields()" function to the class. This function is used
to find the fields. For normal events and kprobes, get_fields() just
returns a pointer to the fields list_head in the class. For syscall
events, it returns the fields list_head in the metadata for the event.

v2:  Fixed the syscall fields. The syscall metadata needs a list
     of fields for both enter and exit.
Acked-by: NFrederic Weisbecker <fweisbec@gmail.com>
Acked-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: NMasami Hiramatsu <mhiramat@redhat.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Add function graph output to irqsoff tracer.

The graph output is enabled by setting new 'display-graph' trace option.
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
LKML-Reference: <1270227683-14631-4-git-send-email-jolsa@redhat.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Let the function graph tracer have custom flags passed to its
output functions.
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
LKML-Reference: <1270227683-14631-3-git-send-email-jolsa@redhat.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Support basic types of integer (u8, u16, u32, u64, s8, s16, s32, s64) in
kprobe tracer. With this patch, users can specify above basic types on
each arguments after ':'. If omitted, the argument type is set as
unsigned long (u32 or u64, arch-dependent).

 e.g.
  echo 'p account_system_time+0 hardirq_offset=%si:s32' > kprobe_events

  adds a probe recording hardirq_offset in signed-32bits value on the
  entry of account_system_time.

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20100412171708.3790.18599.stgit@localhost6.localdomain6>
Signed-off-by: NMasami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Support for the PMU's BTS features has been upstreamed in
v2.6.32, but we still have the old and disabled ptrace-BTS,
as Linus noticed it not so long ago.

It's buggy: TIF_DEBUGCTLMSR is trampling all over that MSR without
regard for other uses (perf) and doesn't provide the flexibility
needed for perf either.

Its users are ptrace-block-step and ptrace-bts, since ptrace-bts
was never used and ptrace-block-step can be implemented using a
much simpler approach.

So axe all 3000 lines of it. That includes the *locked_memory*()
APIs in mm/mlock.c as well.
Reported-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Roland McGrath <roland@redhat.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Markus Metzger <markus.t.metzger@intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
LKML-Reference: <20100325135413.938004390@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Add support for tracing_thresh to the function_graph tracer.  This
version of this feature isolates the checks into new entry and
return functions, to avoid adding more conditional code into the
main function_graph paths.

When the tracing_thresh is set and the function graph tracer is
enabled, only the functions that took longer than the time in
microseconds that was set in tracing_thresh are recorded. To do this
efficiently, only the function exits are recorded:

 [tracing]# echo 100 > tracing_thresh
 [tracing]# echo function_graph > current_tracer
 [tracing]# cat trace
 # tracer: function_graph
 #
 # CPU  DURATION                  FUNCTION CALLS
 # |     |   |                     |   |   |   |
  1) ! 119.214 us  |  } /* smp_apic_timer_interrupt */
  1)   <========== |
  0) ! 101.527 us  |              } /* __rcu_process_callbacks */
  0) ! 126.461 us  |            } /* rcu_process_callbacks */
  0) ! 145.111 us  |          } /* __do_softirq */
  0) ! 149.667 us  |        } /* do_softirq */
  0) ! 168.817 us  |      } /* irq_exit */
  0) ! 248.254 us  |    } /* smp_apic_timer_interrupt */

Also, add support for specifying tracing_thresh on the kernel
command line.  When used like so: "tracing_thresh=200 ftrace=function_graph"
this can be used to analyse system startup.  It is important to disable
tracing soon after boot, in order to avoid losing the trace data.
Acked-by: NFrederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NTim Bird <tim.bird@am.sony.com>
LKML-Reference: <4B87098B.4040308@am.sony.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

GCC 4.5 introduces behavior that forces the alignment of structures to
 use the largest possible value. The default value is 32 bytes, so if
 some structures are defined with a 4-byte alignment and others aren't
 declared with an alignment constraint at all - it will align at 32-bytes.

 For things like the ftrace events, this results in a non-standard array.
 When initializing the ftrace subsystem, we traverse the _ftrace_events
 section and call the initialization callback for each event. When the
 structures are misaligned, we could be treating another part of the
 structure (or the zeroed out space between them) as a function pointer.

 This patch forces the alignment for all the ftrace_event_call structures
 to 4 bytes.

 Without this patch, the kernel fails to boot very early when built with
 gcc 4.5.

 It's trivial to check the alignment of the members of the array, so it
 might be worthwhile to add something to the build system to do that
 automatically. Unfortunately, that only covers this case. I've asked one
 of the gcc developers about adding a warning when this condition is seen.

Cc: stable@kernel.org
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
LKML-Reference: <4B85770B.6010901@suse.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

I don't see why we can only clear all functions from the filter.

After patching:

  # echo sys_open > set_graph_function
  # echo sys_close >> set_graph_function
  # cat set_graph_function
  sys_open
  sys_close
  # echo '!sys_close' >> set_graph_function
  # cat set_graph_function
  sys_open
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4B726388.2000408@cn.fujitsu.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Some misspelled occurences of 'octet' and some comments were also fixed
as I was on it.
Signed-off-by: NDaniel Mack <daniel@caiaq.de>
Cc: Jiri Kosina <trivial@kernel.org>
Cc: Joe Perches <joe@perches.com>
Cc: Junio C Hamano <gitster@pobox.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

In the function graph tracer, a calling function is to be traced
only when it is enabled through the set_graph_function file,
or when it is nested in an enabled function.

Current code uses TSK_TRACE_FL_GRAPH to test whether it is nested
or not. Looking at the code, we can get this:
(trace->depth > 0) <==> (TSK_TRACE_FL_GRAPH is set)

trace->depth is more explicit to tell that it is nested.
So we use trace->depth directly and simplify the code.

No functionality is changed.
TSK_TRACE_FL_GRAPH is not removed yet, it is left for future usage.
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <4B4DB0B6.7040607@cn.fujitsu.com>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>

Since commit 4d9493c9
("ftrace: remove add-hoc code"), option "sched-tree"
has become useless.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
LKML-Reference: <4B1DC50A.7040402@cn.fujitsu.com>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>

An ftrace plugin can add a pipe_open interface when the user opens
trace_pipe. But if the plugin allocates something within the pipe_open
it can not free it because there exists no pipe_close. The hook to
the trace file open has a corresponding close. The closing of the
trace_pipe file should also have a corresponding close.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Commit ee949a86 ("tracing/syscalls:
Use long for syscall ret format and field definitions") changed the
syscall exit return type to long, but forgot to change it in the
struct.
Signed-off-by: NTom Zanussi <tzanussi@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1259133299-23594-3-git-send-email-tzanussi@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>