One of error path in ext3_read_inode() leaks bh since brelse is forgoten.
Signed-off-by: NKirill Korotaev <dev@openvz.org>
Acked-by: NVasily Averin <vvs@sw.ru>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Removing a watched file will oops if audit is disabled (auditctl -e 0).

To reproduce:
- auditctl -e 1
- touch /tmp/foo
- auditctl -w /tmp/foo
- auditctl -e 0
- rm /tmp/foo (or mv)
Signed-off-by: NTony Jones <tonyj@suse.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Yan Zheng pointed out that ext2_remount lacks checking if -o xip should be
enabled or not.  This patch checks for presence of direct_access on the
backing block device and if the blocksize meets the requirements.
Signed-off-by: NCarsten Otte <cotte@de.ibm.com>
Cc: Yan Zheng <yanzheng@21cn.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Background:
  When a userspace application wants to know about machine check events, it
  opens /dev/mcelog and does a read(). Usually, we found that this interface
  works well, but in some cases, when the system was taking large numbers of
  machine check exceptions, the read() would hang. The system would output a
  soft-lockup warning, and the daemon reading from /dev/mcelog would suck up
  as much of a single CPU as it could spinning in system space.

Description:
  This patch fixes this bug. In particular, there was a "continue" inside a
  timeout loop that presumably was intended to break out of the outer loop,
  but instead caused the inner loop to continue. This patch also makes the
  condition for the break-out a little more evident by changing a
  !time_before to a time_after_eq.

Result:
  The read() no longer hangs in this test case.

Testing:
  On my system, I could replicate the bug with the following command:
    # for i in `seq 15000`; do ./inject_sbe.sh; done
  where inject_sbe.sh contains commands to inject a single-bit error into the
  next memory write transaction.

Patch:
  This patch is against git f1518a08.
Signed-off-by: NJoshua Wise <jwise@google.com>
Signed-off-by: NTim Hockin <thockin@google.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Update to checkpatch.pl v0.06.  Of note:

 - do { and else handled correctly as control structures for { matching
 - trailing whitespace correctly tripped when line otherwise empty
 - support for const, including const foo * const bar
 - multiline macros defining values correctly reported

This version of checkpatch.pl can be found at the following URL:

http://www.kernel.org/pub/linux/kernel/people/apw/checkpatch/checkpatch.pl-0.06

Full Changelog:

Andy Whitcroft (14):
      Version: 0.06
      cleanup the Type regular expression declarations
      fix up block counting
      end of line counts as a space for ++ and --
      do { needs the same checks as if, for et al
      handle "const foo * const a" as a valid type
      add spacing checks following ;
      complete whitespace lines should trip trailing whitespace check
      else is also a block control structure
      badly formatted else can trip function declaration
      detect and report trailing statements after else
      types need to be terminated by a boundary
      multiline macros defining values should be surrounded by parentheses
      soften the wording of the Signed-off-by: warnings
Signed-off-by: NAndy Whitcroft <apw@shadowen.org>
Cc: "Randy.Dunlap" <rdunlap@xenotime.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

MAX_ORDER is the first order that is not possible.

Use MAX_ORDER - 1 to calculate the larges possible object size in slab.h
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

These should have been documented from the beginning.  Fix it.
Signed-off-by: NDave Hansen <haveblue@us.ibm.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Encourage developers to avoid the volatile type class in kernel code.
Signed-off-by: NJonathan Corbet <corbet@lwn.net>
Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add asm-um/paravirt.h so that i386 headers that get pulled into UML
don't cause build failures when they want asm/paravirt.h.
Signed-off-by: NJeff Dike <jdike@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Get UML to use the generic bug support rather than arch specific one.

If I insert an artificial bug right before loading init, I get this:

 Kernel panic - not syncing: Kernel mode signal 4

 EIP: 0023:[<0819d501>] CPU: 0 Not tainted ESP: 002b:f7fd4fbc EFLAGS: 00000246
    Not tainted
    EAX: 00000000 EBX: 00007870 ECX: 00000013 EDX: 00007870
    ESI: 0000786d EDI: 00000011 EBP: f7fd4fd8 DS: 002b ES: 002b
    08273bec:  [<0806e814>] show_regs+0x104/0x106
    08273c08:  [<08058927>] panic_exit+0x2c/0x4b
    08273c18:  [<08080ee7>] notifier_call_chain+0x32/0x5b
    08273c38:  [<08080fbd>] __atomic_notifier_call_chain+0x30/0x32
    08273c54:  [<08080fee>] atomic_notifier_call_chain+0x2f/0x31
    08273c70:  [<08073b88>] panic+0x75/0x131
    08273c94:  [<080586c7>] relay_signal+0x87/0x95
    08273cb0:  [<0806b9ee>] sig_handler_common_skas+0x9e/0x120
    08273cd8:  [<08067738>] sig_handler+0x28/0x4f
    08273cec:  [<0806792e>] handle_signal+0x53/0x89
    08273d0c:  [<08069f60>] hard_handler+0x18/0x28
    08273d1c:  [<ffffe500>] transitions+0xf7d598b8/0xfffffff0

With this patch in place, this is how it looks:

 BUG: failure at init/main.c:779/init_post()!
 Kernel panic - not syncing: BUG!

 EIP: 0023:[<081a65d1>] CPU: 0 Not tainted ESP: 002b:f7f0dfbc EFLAGS: 00000246
    Not tainted
    EAX: 00000000 EBX: 000069db ECX: 00000013 EDX: 000069db
    ESI: 000069d8 EDI: 00000011 EBP: f7f0dfd8 DS: 002b ES: 002b
    098efedc:  [<0806e9a4>] show_regs+0x104/0x106
    098efef8:  [<080589c7>] panic_exit+0x2c/0x4b
    098eff08:  [<080818d7>] notifier_call_chain+0x32/0x5b
    098eff28:  [<080819ad>] __atomic_notifier_call_chain+0x30/0x32
    098eff44:  [<080819de>] atomic_notifier_call_chain+0x2f/0x31
    098eff60:  [<08073f28>] panic+0x75/0x131
    098eff84:  [<080541d5>] init_post+0xcd/0xe8
    098eff9c:  [<08048ad4>] kernel_init+0x8e/0x9a
    098effb4:  [<08066dee>] run_kernel_thread+0x41/0x53
    098effe0:  [<08058e75>] new_thread_handler+0x62/0x8b
    098efffc:  [<a55a5a5a>] 0xa55a5a5a

[ jdike - added BUG_TABLE to linker script ]
Signed-off-by: NNick Piggin <npiggin@suse.de>
Signed-off-by: NJeff Dike <jdike@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The stallion driver oopses while initializing ISA cards due to an
uninitialized variable.  This patch changes the initialisation order to
match the PCI code path.
Signed-off-by: NIngo Korb <ml@akana.de>
Acked-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Hopefully this fixes http://bugzilla.kernel.org/show_bug.cgi?id=8635

The struct in6_addr passed to csum_ipv6_magic() is 4 byte aligned, so we
can't use the regular 64-bit loads.  Since the cost of handling of 4 byte
and 1 byte aligned 64-bit data is roughly the same, this code can cope with
any src/dst [mis]alignment.
Signed-off-by: NIvan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Dustin Marquess <jailbird@alcatraz.fdf.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This version brings a some new tests, and a host of changes to fix
false positives, of particular note:

 - detect 'var ++;' and 'var --;' as a bad combination
 - multistatement #defines are now checked based on statement count
 - multistatement #defines with initialisation correctly reported
 - checks the location of the inline keywords
 - EXPORT_SYMBOL for variables are now understood
 - typedefs are loosened to handle sparse etc

This version of checkpatch.pl can be found at the following URL:

      http://www.shadowen.org/~apw/public/checkpatch/checkpatch.pl-0.05

Full Changelog:

Andy Whitcroft (18):
      Version: 0.05
      macro definition checks should be for a single statement
      avoid assignements only in if conditionals
      declarations of function pointers need no space
      multiline macros which are purely initialisation cannot be wrapped
      EXPORT_SYMBOL can also directly follow a variable definition
      check on the location of the inline keyword
      EXPORT_SYMBOL needs to allow for attributes
      ensure we do not find C99 // in strings
      handle malformed #include lines
      accept the {0,} form
      typedefs are sensible for defining function pointer parameters
      ensure { handling correctly handles nested switch() statements
      trailing whitespace checks are not anchored
      typedefs for sparse bitwise annotations make sense
      update the type matcher to include sparse annotations
      clean up indent and spacing
Signed-off-by: NAndy Whitcroft <apw@shadowen.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The intervals of domains that do not have SD_BALANCE_NEWIDLE must be
considered for the calculation of the time of the next balance.  Otherwise
we may defer rebalancing forever.

Siddha also spotted that the conversion of the balance interval
to jiffies is missing. Fix that to.

From: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>

also continue the loop if !(sd->flags & SD_LOAD_BALANCE).
Tested-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>

It did in fact trigger under all three of mainline, CFS, and -rt including CFS
-- see below for a couple of emails from last Friday giving results for these
three on the AMD box (where it happened) and on a single-quad NUMA-Q system
(where it did not, at least not with such severity).
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If slabs are allocated or freed from a large set of call sites (typical for
the kmalloc area) then we may create more output than fits into a single
PAGE and sysfs only gives us one page.  The output should be truncated.
This patch fixes the checks to do the truncation properly.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When binding the driver, check the ID register for a valid identity, in case
the SM501 is not functioning correctly.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add documentation for the SM501 in Documentation/SM501.txt outlining the SM501
driver.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Ensure that the M1XCLK and MCLK are sourced from the same PLL (and refuse to
bind the driver if they are not).

Update the PCI to safe initialisation values, as 72MHz is the maximum clock
for 33MHz PCI bus mastering.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The order of the set and mask operation in sm501_init_reg() was setting and
then masking the bits set.  Correct the order so that we do not end up with
288MHz SDRAM clocks on certain systems.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This init sequence of setting the SDRAM clock before the bus clock is
recommend by Silicon Motion to stop problems with writes not sticking into
registers.
Signed-off-by: NVincent Sanders <vince@simtec.co.uk>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch adds support for suspending the core (mfd driver) of the SM501.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Recently my console UTF-8 patch went mainline.  Here is an additional patch
that fixes two nasty issues and improves a third one, namely:

1. My patch changed the behavior if a glyph is not found in the Unicode
   mapping table. Previously for Unicode values less than 256 or 512 the
   kernel tried to display the glyph from that position of the glyph table,
   which could lead to a different accented letter being displayed. I
   removed this fallback possibility and changed it to display the
   replacement symbol.

   As Behdad pointed out, some fonts (e.g. sun12x22 from the kbd package)
   lack Unicode mapping information, hence all you get is lots of question
   marks. Though theoretically it's actually a user-space bug (the font
   should be fixed), Behdad and I both believe that it'd be good to work
   around in the kernel by re-introducing the fallback solution for ASCII
   characters only. This sounds a quite reasonable decision, since all fonts
   ship the ASCII characters in the first 128 positions. This way users
   won't be surprised by lots of question marks just because s/he issued a
   not-so-perfectly parameterized setfont command. As this fallback is only
   re-introduced for code points below 128, you still won't see an accented
   letter replaced by another, but at least you'll always get the English
   letters right.

2. My patch introduced "question mark with inverted color attributes" as a
   last resort fallback glyph. Though it perfectly works on VGA console, on
   framebuffer you may end up with question marks that are highlighed but
   shouldn't be, and normal characters that are accidentally highlighed.
   This is caused by missing FLUSHes when changing the color attribute.

3. I've updated the table of double-width character based on Markus's
   updated version. Only ten new code poings (one interval) is added.
Signed-off-by: NEgmont Koblinger <egmont@uhulinux.hu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When a namespace is unshared, a refcount on the previous nsproxy is
abusively taken, leading to a memory leak of nsproxy objects.
Signed-off-by: NCedric Le Goater <clg@fr.ibm.com>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Cc: Herbert Poetzl <herbert@13thfloor.at>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NJean Delvare <khali@linux-fr.org>
Cc: Rudolf Marek <r.marek@assembler.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
  ACPI: fix 2.6.20 SMP boot regression
  ACPICA: fix error path in new external package objects as method arguments
  ACPI: gracefully print null trip-point device

Always disable/enable interrupts in the acpi idle routine,
even in the error path.

This is required as the 2.6.20 change in git commit d331e739...
"Fix interrupt race in idle callback" expects the idle handler
to enable interrupt before returning.

There was a case in acpi idle routine, in which interrupt was not being
enabled before return, which caused the system to hang at bootup, while
enabling C-states on an SMP system.

The signature of the hang was that "processor.nocst"
was required to enable boot.
Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

Update defconfigs for ATNGW100 and ATSTK1002. This will enable the
SLUB allocator by default on both, and will enable NFS root on
ATSTK1002 (ATNGW100 had it enabled before.)
Signed-off-by: NHaavard Skinnemoen <hskinnemoen@atmel.com>

The current at32ap7000 platform devices aren't declared as supporting DMA,
so that layered drivers can't tell whether they need to manage DMA.

This patch makes all those platform devices report that they support DMA.
Most do, but in a few cases this is inappropriate.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NHaavard Skinnemoen <hskinnemoen@atmel.com>

USART mapping used to be accomplished by the manual filling of
at32_usart_map[] and at32_nr_usarts.  This has now been replaced
with at32_map_usart() so we can remove these variables.
Signed-off-by: NBen Nizette <ben.nizette@iinet.net.au>
Signed-off-by: NHaavard Skinnemoen <hskinnemoen@atmel.com>

If (start + size) is not cacheline aligned and (start & mask) > (end &
mask), the last but one cacheline won't be invalidated as it should.
Fix this by rounding `end' down to the nearest cacheline boundary if
it gets adjusted due to misalignment.

Also flush the write buffer unconditionally -- if the dcache wrote
back a line just before we invalidated it, the dirty data may be
sitting in the write buffer waiting to corrupt our buffer later.
Signed-off-by: NHaavard Skinnemoen <hskinnemoen@atmel.com>

Previously a program could switch to a compat mode segment and then
execute SYSCALL and it would jump to an uninitialized MSR and crash
the kernel.

Instead supply a dummy target for this case.

Pointed out by Jan Beulich

Cc: jbeulich@novell.com
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Include PPC_MAC in the default too, not only MAC which only covers
m68k MACs.
Signed-off-by: NOlaf Hering <olaf@aepfle.de>
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It is only used for PAE kernels in set_64bit.

The problem is that due to a old Windows bug many CPUs need magic MSRs
to enable CMPXCHG64, and we can't do that nicely early enough before
it is potentially used.

But since we only need it in PAE kernels so only force the checking
for CMPXCHG65 with PAE.

This fixes a boot failure on Transmeta Crusoe
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/cooloney/blackfin-2.6:
  Blackfin arch: add proper const volatile to addr argument to the read functions
  Blackfin arch: Add definition of dma_mapping_error
  Blackfin arch: move cond_syscall() behind __KERNEL__ like all other architectures
  Blackfin arch: match kernel startup messaage with new linker script
  Blackfin arch: add missing braces around array bfin serial init
  Blackfin arch: update printk to use KERN_EMERG and reformat crash output
  Blackfin arch: update ANOMALY handling

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  IB/mlx4: Correct max_srq_wr returned from mlx4_ib_query_device()
  IPoIB/cm: Remove dead definition of struct ipoib_cm_id
  IPoIB/cm: Fix interoperability when MTU doesn't match
  IPoIB/cm: Initialize RX before moving QP to RTR
  IB/umem: Fix possible hang on process exit

* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [AF_RXRPC]: Return the number of bytes buffered in rxrpc_send_data()
  [IPVS]: Fix state variable on failure to start ipvs threads
  [XFRM]: Fix MTU calculation for non-ESP SAs

Do not mark the kernel text read only if KPROBES is in the kernel;
kprobes needs to hot-patch the kernel text to insert it's
instrumentation.

In this case, only mark the .rodata segment as read only.
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
Tested-by: NS. P. Prasanna <prasanna@in.ibm.com>
Cc: Andi Kleen <ak@suse.de>
Cc: William Cohen <wcohen@redhat.com>
Cc: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* master.kernel.org:/pub/scm/linux/kernel/git/davej/agpgart:
  [AGPGART] intel_agp: don't load if no IGD and AGP port

* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6:
  [PARISC] unwinder improvements
  [PARISC] Fix unwinder on 64-bit kernels
  [PARISC] Handle wrapping in expand_upwards()
  [PARISC] stop lcd driver from stripping initial whitespace