Bug introduced in ce47dc56.
Reported-by: NMike Galbraith <efault@gmx.de>
Cc: Chris Samuel <chris@csamuel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Merge branch 'tip/perf/core' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into perf/urgent

Don found that P4 PMU reads CCCR register instead of counter
itself (in attempt to catch unflagged event) this makes P4
NMI handler to consume all NMIs it observes. So the other
NMI users such as kgdb simply have no chance to get NMI
on their hands.

Side note: at moment there is no way to run nmi-watchdog
together with perf tool. This is because both 'perf top' and
nmi-watchdog use same event. So while nmi-watchdog reserves
one event/counter for own needs there is no room for perf tool
left (there is a way to disable nmi-watchdog on boot of course).

Ming has tested this patch with the following results

 | 1. watchdog disabled
 |
 | kgdb tests on boot OK
 | perf works OK
 |
 | 2. watchdog enabled, without patch perf-x86-p4-nmi-4
 |
 | kgdb tests on boot hang
 |
 | 3. watchdog enabled, without patch perf-x86-p4-nmi-4 and do not run kgdb
 | tests on boot
 |
 | "perf top" partialy works
 |   cpu-cycles            no
 |   instructions          yes
 |   cache-references      no
 |   cache-misses          no
 |   branch-instructions   no
 |   branch-misses         yes
 |   bus-cycles            no
 |
 | 4. watchdog enabled, with patch perf-x86-p4-nmi-4 applied
 |
 | kgdb tests on boot OK
 | perf does not work, NMI "Dazed and confused" messages show up
 |

Which means we still have problems with p4 box due to 'unknown'
nmi happens but at least it should fix kgdb test cases.
Reported-by: NJason Wessel <jason.wessel@windriver.com>
Reported-by: NDon Zickus <dzickus@redhat.com>
Signed-off-by: NCyrill Gorcunov <gorcunov@openvz.org>
Acked-by: NDon Zickus <dzickus@redhat.com>
Acked-by: NLin Ming <ming.m.lin@intel.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <4D275E7E.3040903@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

On older gcc (3.3) dynamic debug fails to compile:

include/net/inet_connection_sock.h: In function `inet_csk_reset_xmit_timer':
include/net/inet_connection_sock.h:236: error: duplicate label declaration `do_printk'
include/net/inet_connection_sock.h:219: error: this is a previous declaration
include/net/inet_connection_sock.h:236: error: duplicate label declaration `out'
include/net/inet_connection_sock.h:219: error: this is a previous declaration
include/net/inet_connection_sock.h:236: error: duplicate label `do_printk'
include/net/inet_connection_sock.h:236: error: duplicate label `out'

Fix, by reverting the usage of JUMP_LABEL() in dynamic debug for now.

Cc: <stable@kernel.org>
Reported-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Tested-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: NJason Baron <jbaron@redhat.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

DEFINE_TRACE should also exist when CONFIG_EVENT_TRACING=n. Otherwise, setting
only TRACEPOINTS=y is broken.
Acked-by: NArjan van de Ven <arjan@linux.intel.com>
Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com>
LKML-Reference: <20101028153117.GA4051@Krystal>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

While running my ftrace stress test, this showed up:

BUG: sleeping function called from invalid context at mm/mmap.c:233
...
note: cat[3293] exited with preempt_count 1

The bug was introduced by commit 91e86e56
("tracing: Fix recursive user stack trace")

Cc: <stable@kernel.org>
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4D0089AC.1020802@cn.fujitsu.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Add __rcu annotation to :
	(struct tracepoint)->funcs
Acked-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
LKML-Reference: <4D22D4F1.50505@cn.fujitsu.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The check for NULL skb in the kfree_skb trace event is a duplicate from the
check already done in its only caller, kfree_skb(). Remove this duplicate check.
Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com>
LKML-Reference: <20110106175319.GA30610@Krystal>
Acked-by: NNeil Horman <nhorman@tuxdriver.com>
Acked-by: NDavid S. Miller <davem@davemloft.net>
CC: Steven Rostedt <rostedt@goodmis.org>
CC: Frederic Weisbecker <fweisbec@gmail.com>
CC: Ingo Molnar <mingo@elte.hu>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: Zhaolei <zhaolei@cn.fujitsu.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Add missing comma within the TRACE_EVENT() example in tracepoint.h.
Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com>
LKML-Reference: <20110106184532.GA2526@Krystal>
CC: Frederic Weisbecker <fweisbec@gmail.com>
CC: Ingo Molnar <mingo@elte.hu>
CC: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

While doing some developing, Peter Zijlstra and I have found
that if a CREATE_TRACE_POINTS include is done before module.h
is included, it can break the build.

We have been lucky so far that this has not broke the build
since module.h is included in almost everything.
Reported-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

From the x86_64 low level interrupt handlers, the frame pointer is
saved right after the partial pt_regs frame.

rbp is not supposed to be part of the irq partial saved registers,
but it only requires to extend the pt_regs frame by 8 bytes to
do so, plus a tiny stack offset fixup on irq exit.

This changes a bit the semantics or get_irq_entry() that is supposed
to provide only the value of caller saved registers and the cpu
saved frame. However it's a win for unwinders that can walk through
stack frames on top of get_irq_regs() snapshots.

A noticeable impact is that it makes perf events cpu-clock and
task-clock events based callchains working on x86_64.

Let's then save rbp into the irq pt_regs.

As a result with:

	perf record -e cpu-clock perf bench sched messaging
	perf report --stdio

Before:
    20.94%             perf  [kernel.kallsyms]        [k] lock_acquire
                       |
                       --- lock_acquire
                          |
                          |--44.01%-- __write_nocancel
                          |
                          |--43.18%-- __read
                          |
                          |--6.08%-- fork
                          |          create_worker
                          |
                          |--0.88%-- _dl_fixup
                          |
                          |--0.65%-- do_lookup_x
                          |
                          |--0.53%-- __GI___libc_read
                           --4.67%-- [...]

After:
    19.23%         perf  [kernel.kallsyms]    [k] __lock_acquire
                   |
                   --- __lock_acquire
                      |
                      |--97.74%-- lock_acquire
                      |          |
                      |          |--21.82%-- _raw_spin_lock
                      |          |          |
                      |          |          |--37.26%-- unix_stream_recvmsg
                      |          |          |          sock_aio_read
                      |          |          |          do_sync_read
                      |          |          |          vfs_read
                      |          |          |          sys_read
                      |          |          |          system_call
                      |          |          |          __read
                      |          |          |
                      |          |          |--24.09%-- unix_stream_sendmsg
                      |          |          |          sock_aio_write
                      |          |          |          do_sync_write
                      |          |          |          vfs_write
                      |          |          |          sys_write
                      |          |          |          system_call
                      |          |          |          __write_nocancel

v2: Fix cfi annotations.
Reported-by: NSoeren Sandmann Pedersen <sandmann@redhat.com>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: H. Peter Anvin <hpa@zytor.com
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Jan Beulich <JBeulich@novell.com>

In dump_stack function, bp isn't used anymore, which is introduced by
commit 9c0729dc. This patch removes bp
completely.
Signed-off-by: NRakib Mullick <rakib.mullick@gmail.com>
Cc: Soeren Sandmann <sandmann@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@zytor.com>
LKML-Reference: <AANLkTik9U_Z0WSZ7YjrykER_pBUfPDdgUUmtYx=R74nL@mail.gmail.com>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>

Just re-arrange the code a bit to make it easier to follow what is
going on.  Basically un-negating the if-statement and swapping the code
inside the if-statement with code outside.

No functional changes.
Originally-by: NHuang Ying <ying.huang@intel.com>
Signed-off-by: NDon Zickus <dzickus@redhat.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1294348732-15030-7-git-send-email-dzickus@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

In original NMI handler, NMI reason io port (0x61) is only processed
on BSP.  This makes it impossible to hot-remove BSP.  To solve the
issue, a raw spinlock is used to allow the port to be processed on any
CPU.
Originally-by: NHuang Ying <ying.huang@intel.com>
Signed-off-by: NDon Zickus <dzickus@redhat.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1294348732-15030-6-git-send-email-dzickus@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

With priorities in place and no one really understanding the difference between
DIE_NMI and DIE_NMI_IPI, just remove DIE_NMI_IPI and convert everyone to DIE_NMI.

This also simplifies default_do_nmi() a little bit.  Instead of calling the
die_notifier in both the if and else part, just pull it out and call it before
the if-statement.  This has the side benefit of avoiding a call to the ioport
to see if there is an external NMI sitting around until after the (more frequent)
internal NMIs are dealt with.
Patch-Inspired-by: NHuang Ying <ying.huang@intel.com>
Signed-off-by: NDon Zickus <dzickus@redhat.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1294348732-15030-5-git-send-email-dzickus@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

In order to consolidate the NMI die_chain events, we need to setup the priorities
for the die notifiers.

I started by defining a bunch of common priorities that can be used by the
notifier blocks.  Then I modified the notifier blocks to use the newly created
priorities.

Now that the priorities are straightened out, it should be easier to remove the
event DIE_NMI_IPI.
Signed-off-by: NDon Zickus <dzickus@redhat.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1294348732-15030-4-git-send-email-dzickus@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

They are a handful of places in the code that register a die_notifier
as a catch all in case no claims the NMI.  Unfortunately, they trigger
on events like DIE_NMI and DIE_NMI_IPI, which depending on when they
registered may collide with other handlers that have the ability to
determine if the NMI is theirs or not.

The function unknown_nmi_error() makes one last effort to walk the
die_chain when no one else has claimed the NMI before spitting out
messages that the NMI is unknown.

This is a better spot for these devices to execute any code without
colliding with the other handlers.

The two drivers modified are only compiled on x86 arches I believe, so
they shouldn't be affected by other arches that may not have
DIE_NMIUNKNOWN defined.
Signed-off-by: NDon Zickus <dzickus@redhat.com>
Cc: Russ Anderson <rja@sgi.com>
Cc: Corey Minyard <minyard@acm.org>
Cc: openipmi-developer@lists.sourceforge.net
Cc: dann frazier <dannf@hp.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1294348732-15030-3-git-send-email-dzickus@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Replace the NMI related magic numbers with symbol constants.

Memory parity error is only valid for IBM PC-AT, newer machine use
bit 7 (0x80) of 0x61 port for PCI SERR. While memory error is usually
reported via MCE. So corresponding function name and kernel log string
is changed.

But on some machines, PCI SERR line is still used to report memory
errors. This is used by EDAC, so corresponding EDAC call is reserved.
Signed-off-by: NHuang Ying <ying.huang@intel.com>
Signed-off-by: NDon Zickus <dzickus@redhat.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1294348732-15030-2-git-send-email-dzickus@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Adds perf_event_time() to try and centralize access to event
timing and in particular ctx->time. Prepares for cgroup support.
Signed-off-by: NStephane Eranian <eranian@google.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4d22059c.122ae30a.5e0e.ffff8b8b@mx.google.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Replace all occurrences of:
	event->cpu != -1 && event->cpu == smp_processor_id()
by a call to:
	event_filter_match(event)

This makes the code more consistent and will make the cgroup
patch smaller.
Signed-off-by: NStephane Eranian <eranian@google.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4d220593.2308e30a.48c5.ffff8ae9@mx.google.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

In particular this patch move perf_event_exit_task() before
cgroup_exit() to allow for cgroup support. The cgroup_exit()
function detaches the cgroups attached to a task.

Other movements include hoisting some definitions and inlines
at the top of perf_event.c
Signed-off-by: NStephane Eranian <eranian@google.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4d22058b.cdace30a.4657.ffff95b1@mx.google.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Since commit 69aad6f1(perf tools: Introduce event selectors), only
perf_event_attr::type and ::config are passed to event selector, which
makes perf tool not work correctly.

For example, PEBS does not work because perf_event_attr::precise_ip is
not passed to the syscall.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1294369869.20563.19.camel@minggr.sh.intel.com>
Signed-off-by: NLin Ming <ming.m.lin@intel.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

It seems that some gcc versions build by default with frame pointers
and some others omit them.

Just build the tools with frame pointers as the callchains can be an
important part of the perf workflow.

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <1294325513-14276-3-git-send-email-fweisbec@gmail.com>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

I found when specifying all tracepoints with -e to one of subcommand,
such as 'stat', the program will trigger a buffer overflow error, like
this:

*** buffer overflow detected ***: ./perf terminated
======= Backtrace: =========
/lib64/libc.so.6(__fortify_fail+0x37)[0x382cefb2c7]
....

The tracepoints are separated by comma, something like this:

$ perf stat -a -e `perf list |grep Tracepoint|awk -F'[' '{gsub(/[[:space:]]+/,"",$1);array[FNR]=$1}END{outputs=array[1];for (i=2;i<=FNR;i++){ outputs=outputs "," array[i];};print outputs}'`

The root reason of this problem is that store_event_type() is called for all
events, and will overflow the 'filename' at:

    strncat(filename, orgname, strlen(orgname));

This patch fixes it by calling store_event_type() only when the event name has
been found.

LKML-Reference: <20110106093922.GB6713@hpt.nay.redhat.com>
Signed-off-by: NHan Pingtian <phan@redhat.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, mm: Initialize initial_page_table before paravirt jumps

Merge branches 'x86-alternatives-for-linus', 'x86-fpu-for-linus', 'x86-hwmon-for-linus', 'x86-paravirt-for-linus', 'core-locking-for-linus' and 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-alternatives-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, suspend: Avoid unnecessary smp alternatives switch during suspend/resume

* 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86-64, asm: Use fxsaveq/fxrestorq in more places

* 'x86-hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, hwmon: Add core threshold notification to therm_throt.c

* 'x86-paravirt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, paravirt: Use native_halt on a halt, not native_safe_halt

* 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  locking, lockdep: Convert sprintf_symbol to %pS

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  irq: Better struct irqaction layout

* 'x86-uv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, UV, BAU: Extend for more than 16 cpus per socket
  x86, UV: Fix the effect of extra bits in the hub nodeid register
  x86, UV: Add common uv_early_read_mmr() function for reading MMRs

* 'x86-tsc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: Check tsc available/disabled in the delayed init function
  x86: Improve TSC calibration using a delayed workqueue
  x86: Make tsc=reliable override boot time stability checks

Merge branch 'x86-security-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-security-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  module: Move RO/NX module protection to after ftrace module update
  x86: Resume trampoline must be executable
  x86: Add RO/NX protection for loadable kernel modules
  x86: Add NX protection for kernel data
  x86: Fix improper large page preservation

Merge branch 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, earlyprintk: Move mrst early console to platform/ and fix a typo
  x86, apbt: Setup affinity for apb timers acting as per-cpu timer
  ce4100: Add errata fixes for UART on CE4100
  x86: platform: Move iris to x86/platform where it belongs
  x86, mrst: Check platform_device_register() return code
  x86/platform: Add Eurobraille/Iris power off support
  x86, mrst: Add explanation for using 1960 as the year offset for vrtc
  x86, mrst: Fix dependencies of "select INTEL_SCU_IPC"
  x86, mrst: The shutdown for MRST requires the SCU IPC mechanism
  x86: Ce4100: Add reboot_fixup() for CE4100
  ce4100: Add PCI register emulation for CE4100
  x86: Add CE4100 platform support
  x86: mrst: Set vRTC's IRQ to level trigger type
  x86: mrst: Add audio driver bindings
  rtc: Add drivers/rtc/rtc-mrst.c
  x86: mrst: Add vrtc driver which serves as a wall clock device
  x86: mrst: Add Moorestown specific reboot/shutdown support
  x86: mrst: Parse SFI timer table for all timer configs
  x86/mrst: Add SFI platform device parsing code

Merge branch 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, microcode, AMD: Cleanup code a bit
  x86, microcode, AMD: Replace vmalloc+memset with vzalloc

* 'x86-mce-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  apic, amd: Make firmware bug messages more meaningful
  mce, amd: Remove goto in threshold_create_device()
  mce, amd: Add helper functions to setup APIC
  mce, amd: Shorten local variables mci_misc_{hi,lo}
  mce, amd: Implement mce_threshold_block_init() helper function

* 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: Fix included-by file reference comments
  x86, cpu: Only CPU features determine NX capabilities
  x86, cpu: Call verify_cpu during 32bit CPU startup
  x86, cpu: Clear XD_DISABLED flag on Intel to regain NX
  x86, cpu: Rename verify_cpu_64.S to verify_cpu.S

Merge branch 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: Fix APIC ID sizing bug on larger systems, clean up MAX_APICS confusion
  x86, acpi: Parse all SRAT cpu entries even above the cpu number limitation
  x86, acpi: Add MAX_LOCAL_APIC for 32bit
  x86: io_apic: Split setup_ioapic_ids_from_mpc()
  x86: io_apic: Fix CONFIG_X86_IO_APIC=n breakage
  x86: apic: Move probe_nr_irqs_gsi() into ioapic_init_mappings()
  x86: Allow platforms to force enable apic

Merge branch 'x86-amd-nb-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-amd-nb-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, cacheinfo: Cleanup L3 cache index disable support
  x86, amd-nb: Cleanup AMD northbridge caching code
  x86, amd-nb: Complete the rename of AMD NB and related code

* 'timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  MAINTAINERS: Update timer related entries
  timers: Use this_cpu_read
  timerqueue: Make timerqueue_getnext() static inline
  hrtimer: fix timerqueue conversion flub
  hrtimers: Convert hrtimers to use timerlist infrastructure
  timers: Fixup allmodconfig build issue
  timers: Rename timerlist infrastructure to timerqueue
  timers: Introduce timerlist infrastructure.
  hrtimer: Remove stale comment on curr_timer
  timer: Warn when del_timer_sync() is called in hardirq context
  timer: Del_timer_sync() can be used in softirq context
  timer: Make try_to_del_timer_sync() the same on SMP and UP
  posix-timers: Annotate lock_timer()
  timer: Permit statically-declared work with deferrable timers
  time: Use ARRAY_SIZE macro in timecompare.c
  timer: Initialize the field slack of timer_list
  timer_list: Remove alignment padding on 64 bit when CONFIG_TIMER_STATS
  time: Compensate for rounding on odd-frequency clocksources

Fix up trivial conflict in MAINTAINERS

Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (30 commits)
  sched: Change wait_for_completion_*_timeout() to return a signed long
  sched, autogroup: Fix reference leak
  sched, autogroup: Fix potential access to freed memory
  sched: Remove redundant CONFIG_CGROUP_SCHED ifdef
  sched: Fix interactivity bug by charging unaccounted run-time on entity re-weight
  sched: Move periodic share updates to entity_tick()
  printk: Use this_cpu_{read|write} api on printk_pending
  sched: Make pushable_tasks CONFIG_SMP dependant
  sched: Add 'autogroup' scheduling feature: automated per session task groups
  sched: Fix unregister_fair_sched_group()
  sched: Remove unused argument dest_cpu to migrate_task()
  mutexes, sched: Introduce arch_mutex_cpu_relax()
  sched: Add some clock info to sched_debug
  cpu: Remove incorrect BUG_ON
  cpu: Remove unused variable
  sched: Fix UP build breakage
  sched: Make task dump print all 15 chars of proc comm
  sched: Update tg->shares after cpu.shares write
  sched: Allow update_cfs_load() to update global load
  sched: Implement demand based update_cfs_load()
  ...

Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (146 commits)
  tools, perf: Documentation for the power events API
  perf: Add calls to suspend trace point
  perf script: Make some lists static
  perf script: Use the default lost event handler
  perf session: Warn about errors when processing pipe events too
  perf tools: Fix perf_event.h header usage
  perf test: Clarify some error reports in the open syscall test
  x86, NMI: Add touch_nmi_watchdog to io_check_error delay
  x86: Avoid calling arch_trigger_all_cpu_backtrace() at the same time
  x86: Only call smp_processor_id in non-preempt cases
  perf timechart: Adjust perf timechart to the new power events
  perf: Clean up power events by introducing new, more generic ones
  perf: Do not export power_frequency, but power_start event
  perf test: Add test for counting open syscalls
  perf evsel: Auto allocate resources needed for some methods
  perf evsel: Use {cpu,thread}_map to shorten list of parameters
  perf tools: Refactor all_tids to hold nr and the map
  perf tools: Refactor cpumap to hold nr and the map
  perf evsel: Introduce per cpu and per thread open helpers
  perf evsel: Steal the counter reading routines from stat
  ...

Merge branch 'core-futexes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'core-futexes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  futex: Add futex_q static initializer
  futex: Replace fshared and clockrt with combined flags
  futex: Cleanup stale fshared flag interfaces

Merge branch 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  rcu: remove unused __list_for_each_rcu() macro
  rculist: fix borked __list_for_each_rcu() macro
  rcu: reduce __call_rcu()-induced contention on rcu_node structures
  rcu: limit rcu_node leaf-level fanout
  rcu: fine-tune grace-period begin/end checks
  rcu: Keep gpnum and completed fields synchronized
  rcu: Stop chasing QS if another CPU did it for us
  rcu: increase synchronize_sched_expedited() batching
  rcu: Make synchronize_srcu_expedited() fast if running readers
  rcu: fix race condition in synchronize_sched_expedited()
  rcu: update documentation/comments for Lai's adoption patch
  rcu,cleanup: simplify the code when cpu is dying
  rcu,cleanup: move synchronize_sched_expedited() out of sched.c
  rcu: get rid of obsolete "classic" names in TREE_RCU tracing
  rcu: Distinguish between boosting and boosted
  rcu: document TINY_RCU and TINY_PREEMPT_RCU tracing.
  rcu: add tracing for TINY_RCU and TINY_PREEMPT_RCU
  rcu: priority boosting for TINY_PREEMPT_RCU
  rcu: move TINY_RCU from softirq to kthread
  rcu: add priority-inversion testing to rcutorture