- 17 11月, 2010 6 次提交
-
-
由 Wolfram Sang 提交于
The printout for the type should be just "5xxx", so 512x users won't wonder why they have a mpc52xx-type UART. Signed-off-by: NWolfram Sang <w.sang@pengutronix.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Jiri Slaby 提交于
* use newly added for_each_console for iterating consoles * add proper console locking * do not initialize tmp twice * no need to declare console_drivers, it's already done in console.h Signed-off-by: NJiri Slaby <jslaby@suse.cz> Acked-by: NKyle McMartin <kyle@mcmartin.ca> Cc: Helge Deller <deller@gmx.de> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: linux-parisc@vger.kernel.org Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Jiri Slaby 提交于
It allows users to see what consoles are currently known to the system and with what flags. It is based on Werner's patch, the part about traversing fds was removed, the code was moved to kernel/printk.c, where consoles are handled and it makes more sense to me. Signed-off-by: Jiri Slaby <jslaby@suse.cz> [cleanups] Signed-off-by: N"Dr. Werner Fink" <werner@suse.de> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Jiri Slaby 提交于
Use newly added for_each_console for iterating consoles. Signed-off-by: NJiri Slaby <jslaby@suse.cz> Cc: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Chris Wright <chrisw@sous-sol.org> Cc: virtualization@lists.osdl.org Cc: xen-devel@lists.xensource.com Cc: linux-fbdev@vger.kernel.org Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Jiri Slaby 提交于
We reference termios and termiox in tty_driver.h, but we do not include linux/termios.h where these are defined. Add the #include properly. Otherwise when we include tty_driver.h, we get compile errors. Signed-off-by: NJiri Slaby <jslaby@suse.cz> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Greg KH <gregkh@suse.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Jiri Slaby 提交于
Move it out of printk.c so that we can use it all over the code. There are some potential users which will be converted to that macro in next patches. Signed-off-by: NJiri Slaby <jslaby@suse.cz> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 12 11月, 2010 7 次提交
-
-
由 Baurzhan Ismagulov 提交于
AFAICT, these fields are not used anywhere. Signed-off-by: NBaurzhan Ismagulov <ibr@radix50.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Baurzhan Ismagulov 提交于
Setting Rx FIFO size to 1 reduces reader process wakeup latency up to 20x for baud rates <= 9600. This patch sets the Rx FIFO size to 1 for baud rates <= 9600 or if low latency has been requested for the tty. Signed-off-by: NMichael Trimarchi <michael@gandalf.sssup.it> Signed-off-by: NBruno Morelli <bruno@evidence.eu.com> Signed-off-by: NBaurzhan Ismagulov <ibr@radix50.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Claudio Scordino 提交于
Documentation about RS485 serial communications Signed-off-by: NClaudio Scordino <claudio@evidence.eu.com> Acked-by: NRandy Dunlap <randy.dunlap@oracle.com> Acked-by: NRussell King <linux@arm.linux.org.uk> Acked-by: NGrant Edwards <grant.b.edwards@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Cox 提交于
[Original From Ken Mills but I redid it using pr_ helpers instead] Also fix up coding style, there are two warnings left but that is where the CodingStyle tools blow up because they cannot handle if (blah) { foo } else switch (x) { case 1: } Signed-off-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Cox 提交于
The mux supports several encoding schemes. Encoding 0 is a "not recommended" mode still sometimes used. This has now been tested with hardware that supports this mode, and found wanting. Fix the FCS handling in this mode and correct the state machine. Signed-off-by: NKen Mills <ken.k.mills@intel.com> Signed-off-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alexey Charkov 提交于
This adds a driver for the serial ports found in VIA and WonderMedia Systems-on-Chip. Interrupt-driven FIFO operation is implemented. The hardware also supports pure register-based operation (which is slower) and DMA-based FIFO operation. As the FIFOs are only 16 bytes long, DMA operation is probably not worth the hassle. Signed-off-by: NAlexey Charkov <alchark@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Russ Gorby 提交于
Prototype driver for the IFX6x60 series of SPI attached modems by Jim Stanley and Russ Gorby Signed-off-by: NRuss Gorby <richardx.r.gorby@intel.com> [Some reworking and a major cleanup] Signed-off-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 09 11月, 2010 10 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4由 Linus Torvalds 提交于
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: Add new ext4 inode tracepoints ext4: Don't call sb_issue_discard() in ext4_free_blocks() ext4: do not try to grab the s_umount semaphore in ext4_quota_off ext4: fix potential race when freeing ext4_io_page structures ext4: handle writeback of inodes which are being freed ext4: initialize the percpu counters before replaying the journal ext4: "ret" may be used uninitialized in ext4_lazyinit_thread() ext4: fix lazyinit hang after removing request
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: TTY: move .gitignore from drivers/char/ to drivers/tty/vt/ TTY: create drivers/tty/vt and move the vt code there TTY: create drivers/tty and move the tty core files there
-
由 Linus Torvalds 提交于
Merge branch 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-next-2.6 * 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-next-2.6: Staging: ath6kl: remove empty files that mess with 'distclean' staging: ath6kl: Fixing the driver to use modified mmc_host structure Staging: solo6x10: fix build problem
-
由 Linus Torvalds 提交于
Merge branch 'rmobile-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6 * 'rmobile-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: mmc: sh_mmcif: Convert extern inline to static inline. ARM: mach-shmobile: Allow GPIO chips to register IRQ mappings. ARM: mach-shmobile: fix sh7372 after a recent clock framework rework ARM: mach-shmobile: include drivers/sh/Kconfig ARM: mach-shmobile: ap4evb: Add HDMI sound support ARM: mach-shmobile: clock-sh7372: Add FSIDIV clock support ARM: shmobile: remove sh_timer_config clk member
-
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6由 Linus Torvalds 提交于
* 'sh-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: sh: clkfwk: Fix up checkpatch warnings. sh: make some needlessly global sh7724 clocks static sh: add clk_round_parent() to optimize parent clock rate sh: Simplify phys_addr_mask()/PTE_PHYS_MASK for 29/32-bit. sh: nommu: Support building without an uncached mapping. sh: nommu: use 32-bit phys mode. sh: mach-se: Fix up SE7206 no ioport build. sh: intc: Update for single IRQ reservation helper. sh: clkfwk: Fix up rate rounding error handling. sh: mach-se: Rip out superfluous 7751 PIO routines. sh: mach-se: Rip out superfluous 770x PIO routines. sh: mach-edosk7705: Kill off machtype, consolidate board def. sh: mach-edosk7705: update for this century, kill off PIO trapping. sh: mach-se: Rip out superfluous 7206 PIO routines. sh: mach-systemh: Kill off dead board. sh: mach-snapgear: Kill off machtype, consolidate board def. sh: mach-snapgear: Rip out superfluous PIO routines. sh: mach-microdev: SuperIO-relative ioport mapping.
-
由 Theodore Ts'o 提交于
Add ext4_evict_inode, ext4_drop_inode, ext4_mark_inode_dirty, and ext4_begin_ordered_truncate() Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Theodore Ts'o 提交于
Commit 5c521830 (ext4: Support discard requests when running in no-journal mode) attempts to add sb_issue_discard() for data blocks (in data=writeback mode) and in no-journal mode. Unfortunately, this no longer works, because in commit dd3932ed (block: remove BLKDEV_IFL_WAIT), sb_issue_discard() only presents a synchronous interface, and there are times when we call ext4_free_blocks() when we are are holding a spinlock, or are otherwise in an atomic context. For now, I've removed the call to sb_issue_discard() to prevent a deadlock or (if spinlock debugging is enabled) failures like this: BUG: scheduling while atomic: rc.sysinit/1376/0x00000002 Pid: 1376, comm: rc.sysinit Not tainted 2.6.36-ARCH #1 Call Trace: [<ffffffff810397ce>] __schedule_bug+0x5e/0x70 [<ffffffff81403110>] schedule+0x950/0xa70 [<ffffffff81060bad>] ? insert_work+0x7d/0x90 [<ffffffff81060fbd>] ? queue_work_on+0x1d/0x30 [<ffffffff81061127>] ? queue_work+0x37/0x60 [<ffffffff8140377d>] schedule_timeout+0x21d/0x360 [<ffffffff812031c3>] ? generic_make_request+0x2c3/0x540 [<ffffffff81402680>] wait_for_common+0xc0/0x150 [<ffffffff81041490>] ? default_wake_function+0x0/0x10 [<ffffffff812034bc>] ? submit_bio+0x7c/0x100 [<ffffffff810680a0>] ? wake_bit_function+0x0/0x40 [<ffffffff814027b8>] wait_for_completion+0x18/0x20 [<ffffffff8120a969>] blkdev_issue_discard+0x1b9/0x210 [<ffffffff811ba03e>] ext4_free_blocks+0x68e/0xb60 [<ffffffff811b1650>] ? __ext4_handle_dirty_metadata+0x110/0x120 [<ffffffff811b098c>] ext4_ext_truncate+0x8cc/0xa70 [<ffffffff810d713e>] ? pagevec_lookup+0x1e/0x30 [<ffffffff81191618>] ext4_truncate+0x178/0x5d0 [<ffffffff810eacbb>] ? unmap_mapping_range+0xab/0x280 [<ffffffff810d8976>] vmtruncate+0x56/0x70 [<ffffffff811925cb>] ext4_setattr+0x14b/0x460 [<ffffffff811319e4>] notify_change+0x194/0x380 [<ffffffff81117f80>] do_truncate+0x60/0x90 [<ffffffff811e08fa>] ? security_inode_permission+0x1a/0x20 [<ffffffff811eaec1>] ? tomoyo_path_truncate+0x11/0x20 [<ffffffff81127539>] do_last+0x5d9/0x770 [<ffffffff811278bd>] do_filp_open+0x1ed/0x680 [<ffffffff8140644f>] ? page_fault+0x1f/0x30 [<ffffffff81132bfc>] ? alloc_fd+0xec/0x140 [<ffffffff81118db1>] do_sys_open+0x61/0x120 [<ffffffff81118e8b>] sys_open+0x1b/0x20 [<ffffffff81002e6b>] system_call_fastpath+0x16/0x1b https://bugzilla.kernel.org/show_bug.cgi?id=22302Reported-by: NMathias Burén <mathias.buren@gmail.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Cc: jiayingz@google.com
-
由 Dmitry Monakhov 提交于
It's not needed to sync the filesystem, and it fixes a lock_dep complaint. Signed-off-by: NDmitry Monakhov <dmonakhov@gmail.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Reviewed-by: NJan Kara <jack@suse.cz>
-
由 Theodore Ts'o 提交于
Use an atomic_t and make sure we don't free the structure while we might still be submitting I/O for that page. Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Theodore Ts'o 提交于
The following BUG can occur when an inode which is getting freed when it still has dirty pages outstanding, and it gets deleted (in this because it was the target of a rename). In ordered mode, we need to make sure the data pages are written just in case we crash before the rename (or unlink) is committed. If the inode is being freed then when we try to igrab the inode, we end up tripping the BUG_ON at fs/ext4/page-io.c:146. To solve this problem, we need to keep track of the number of io callbacks which are pending, and avoid destroying the inode until they have all been completed. That way we don't have to bump the inode count to keep the inode from being destroyed; an approach which doesn't work because the count could have already been dropped down to zero before the inode writeback has started (at which point we're not allowed to bump the count back up to 1, since it's already started getting freed). Thanks to Dave Chinner for suggesting this approach, which is also used by XFS. kernel BUG at /scratch_space/linux-2.6/fs/ext4/page-io.c:146! Call Trace: [<ffffffff811075b1>] ext4_bio_write_page+0x172/0x307 [<ffffffff811033a7>] mpage_da_submit_io+0x2f9/0x37b [<ffffffff811068d7>] mpage_da_map_and_submit+0x2cc/0x2e2 [<ffffffff811069b3>] mpage_add_bh_to_extent+0xc6/0xd5 [<ffffffff81106c66>] write_cache_pages_da+0x2a4/0x3ac [<ffffffff81107044>] ext4_da_writepages+0x2d6/0x44d [<ffffffff81087910>] do_writepages+0x1c/0x25 [<ffffffff810810a4>] __filemap_fdatawrite_range+0x4b/0x4d [<ffffffff810815f5>] filemap_fdatawrite_range+0xe/0x10 [<ffffffff81122a2e>] jbd2_journal_begin_ordered_truncate+0x7b/0xa2 [<ffffffff8110615d>] ext4_evict_inode+0x57/0x24c [<ffffffff810c14a3>] evict+0x22/0x92 [<ffffffff810c1a3d>] iput+0x212/0x249 [<ffffffff810bdf16>] dentry_iput+0xa1/0xb9 [<ffffffff810bdf6b>] d_kill+0x3d/0x5d [<ffffffff810be613>] dput+0x13a/0x147 [<ffffffff810b990d>] sys_renameat+0x1b5/0x258 [<ffffffff81145f71>] ? _atomic_dec_and_lock+0x2d/0x4c [<ffffffff810b2950>] ? cp_new_stat+0xde/0xea [<ffffffff810b29c1>] ? sys_newlstat+0x2d/0x38 [<ffffffff810b99c6>] sys_rename+0x16/0x18 [<ffffffff81002a2b>] system_call_fastpath+0x16/0x1b Reported-by: NNick Bowler <nbowler@elliptictech.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Tested-by: NNick Bowler <nbowler@elliptictech.com>
-
- 08 11月, 2010 5 次提交
-
-
由 Paul Mundt 提交于
-
由 Paul Mundt 提交于
Merge branches 'sh/pio-death', 'sh/nommu', 'sh/clkfwk', 'sh/core' and 'sh/intc-extension' into sh-fixes-for-linus
-
由 Paul Mundt 提交于
The clk_round_parent() change introduced various checkpatch warnings, tidy them up. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Guennadi Liakhovetski 提交于
These clocks are currently only used inside one .c file and are not declared in any headers, therefore having them global is useless. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Guennadi Liakhovetski 提交于
Sometimes it is possible and reasonable to adjust the parent clock rate to improve precision of the child clock, e.g., if the child clock has no siblings. clk_round_parent() is a new addition to the SH clock-framework API, that implements such an optimization for child clocks with divisors, taking all integer values in a range. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 07 11月, 2010 1 次提交
-
-
由 Greg Kroah-Hartman 提交于
These two .h files would get removed from the tree when doing make distclean It turns out they are not needed at all, so just delete them which fixes people's git trees when doing development. Reported-by: NAndi Kleen <andi@firstfloor.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 06 11月, 2010 11 次提交
-
-
由 Vivek Goyal 提交于
While scanning the floopy code due to c093ee4f ("floppy: fix use-after-free in module load failure path"), I found one more instance of trying to access disk->queue pointer after doing put_disk() on gendisk. For some reason , floppy moule still loads/unloads fine. The object is probably still around with right pointer values. o There seems to be one more instance of trying to cleanup the request queue after we have called put_disk() on associated gendisk. o This fix is more out of code inspection. Even without this fix for some reason I am able to load/unload floppy module without any issues. o Floppy module loads/unloads fine after the fix. Signed-off-by: NVivek Goyal <vgoyal@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Greg Kroah-Hartman 提交于
The autogenerated files (consolemap_deftbl.c and defkeymap.c) need to be ignored by git, so move the .gitignore file that was doing it to the properly location now that the files have moved as well. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Linus Torvalds 提交于
Commit 27ae60f8 ("ipw2x00: replace "ieee80211" with "libipw" where appropriate") changed DRV_NAME to be "libipw", but didn't properly fix up the places where it was used to specify the name for the /proc/net/ directory. For backwards compatibility reasons, that directory name remained "ieee80211", but due to the DRV_NAME change, the error case printouts and the cleanup functions now used "libipw" instead. Which made it all fail badly. For example, on module unload as reported by Randy: WARNING: at fs/proc/generic.c:816 remove_proc_entry+0x156/0x35e() name 'libipw' because it's trying to unregister a /proc directory that obviously doesn't even exist. Clean it all up to use DRV_PROCNAME for the actual /proc directory name. Reported-and-tested-by: NRandy Dunlap <randy.dunlap@oracle.com> Cc: Pavel Roskin <proski@gnu.org> Cc: John W. Linville <linville@tuxdriver.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/virt/kvm/kvm由 Linus Torvalds 提交于
* 'kvm-updates/2.6.37' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: PPC: BookE: Load the lower half of MSR KVM: PPC: BookE: fix sleep with interrupts disabled KVM: PPC: e500: Call kvm_vcpu_uninit() before kvmppc_e500_tlb_uninit(). PPC: KVM: Book E doesn't have __end_interrupts. KVM: x86: Issue smp_call_function_many with preemption disabled KVM: x86: fix information leak to userland KVM: PPC: fix information leak to userland KVM: MMU: fix rmap_remove on non present sptes KVM: Write protect memory after slot swap
-
由 Linus Torvalds 提交于
Commit 48821184 ("floppy: switch to one queue per drive instead of sharing a queue") introduced a use-after-free. We do "put_disk()" on the disk device _before_ we then clean up the queue associated with that disk. Move the put_disk() down to avoid dereferencing a free'd data structure. Cc: Jens Axboe <jaxboe@fusionio.com> Cc: Vivek Goyal <vgoyal@redhat.com> Reported-and-tested-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Daney 提交于
Commit d9ca07a0 ("watchdog: Avoid kernel crash when disabling watchdog") introduces a section mismatch. Now that we reference no_watchdog from non-__init code it can no longer be __initdata. Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com> Cc: Stephane Eranian <eranian@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (41 commits) inet_diag: Make sure we actually run the same bytecode we audited. netlink: Make nlmsg_find_attr take a const nlmsghdr*. fib: fib_result_assign() should not change fib refcounts netfilter: ip6_tables: fix information leak to userspace cls_cgroup: Fix crash on module unload memory corruption in X.25 facilities parsing net dst: fix percpu_counter list corruption and poison overwritten rds: Remove kfreed tcp conn from list rds: Lost locking in loop connection freeing de2104x: fix panic on load atl1 : fix panic on load netxen: remove unused firmware exports caif: Remove noisy printout when disconnecting caif socket caif: SPI-driver bugfix - incorrect padding. caif: Bugfix for socket priority, bindtodev and dbg channel. smsc911x: Set Ethernet EEPROM size to supported device's size ipv4: netfilter: ip_tables: fix information leak to userland ipv4: netfilter: arp_tables: fix information leak to userland cxgb4vf: remove call to stop TX queues at load time. cxgb4: remove call to stop TX queues at load time. ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6由 Linus Torvalds 提交于
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: ohci: fix race when reading count in AR descriptor firewire: ohci: avoid reallocation of AR buffers firewire: ohci: fix race in AR split packet handling firewire: ohci: fix buffer overflow in AR split packet handling
-
git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: cifs: make cifs_set_oplock_level() take a cifsInodeInfo pointer cifs: dereferencing first then checking cifs: trivial comment fix: tlink_tree is now a rbtree [CIFS] Cleanup unused variable build warning cifs: convert tlink_tree to a rbtree cifs: store pointer to master tlink in superblock (try #2) cifs: trivial doc fix: note setlease implemented CIFS: Add cifs_set_oplock_level FS: cifs, remove unneeded NULL tests
-
由 Oleg Nesterov 提交于
posix-cpu-timers.c correctly assumes that the dying process does posix_cpu_timers_exit_group() and removes all !CPUCLOCK_PERTHREAD timers from signal->cpu_timers list. But, it also assumes that timer->it.cpu.task is always the group leader, and thus the dead ->task means the dead thread group. This is obviously not true after de_thread() changes the leader. After that almost every posix_cpu_timer_ method has problems. It is not simple to fix this bug correctly. First of all, I think that timer->it.cpu should use struct pid instead of task_struct. Also, the locking should be reworked completely. In particular, tasklist_lock should not be used at all. This all needs a lot of nontrivial and hard-to-test changes. Change __exit_signal() to do posix_cpu_timers_exit_group() when the old leader dies during exec. This is not the fix, just the temporary hack to hide the problem for 2.6.37 and stable. IOW, this is obviously wrong but this is what we currently have anyway: cpu timers do not work after mt exec. In theory this change adds another race. The exiting leader can detach the timers which were attached to the new leader. However, the window between de_thread() and release_task() is small, we can pretend that sys_timer_create() was called before de_thread(). Signed-off-by: NOleg Nesterov <oleg@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging由 Linus Torvalds 提交于
* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging: hwmon: (ltc4261) Fix error message format hwmon: (ltc4261) Add missing newline in debug message
-