- 19 5月, 2010 40 次提交
-
-
由 Hans Verkuil 提交于
The indentation of the sections had gone wrong, causing a mistake with section nesting. Fixed. Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
The usbvision driver created vbi device nodes but the actual implementation was just stubs and only returned errors to userspace. In addition it used video_usercopy() and we want to remove that eventually. So remove all the vbi code except for the vbi flag in the card definition should someone ever be mad enough to work on a proper implementation for this driver. Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
You want to be able to reach the debug code at the end of this function, so don't use return, use break. Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
If the ioctl was defined without direction (e.g. _IO('o', 25)), then the arg as passed to vidioc_default was NULL instead of the original argument. Several ioctls in e.g. include/linux/dvb/video.h and audio.h use this type of ioctl to pass simple numerical values to the driver. Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
For some reason the definition of enum v4l2_ctrl_type is far from the place where it is actually needed. This makes it hard to work with this header. Move it to just before struct v4l2_queryctrl, which is the one that actually uses it. Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
The spec says that the control ID for these types of controls is the same as that of the control class. But it should read: 'control class + 1'. Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Dan Carpenter 提交于
If the kmalloc() failed for "ccdc_cfg = kmalloc(...);" then we would exit with the lock held. I moved the mutex_lock() below the allocation because it isn't protecting anything in that block and allocations are allocations are sometimes slow. Signed-off-by: NDan Carpenter <error27@gmail.com> Acked-by: NVaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
ir-core.h has the kABI to be used by the bridge drivers, when needing to register IR protocols and pass IR events. However, the same file also contains IR subsystem internal calls, meant to be used inside ir-core and between ir-core and the raw decoders. Better to move those functions to an internal header, for some reasons: 1) Header will be a little more cleaner; 2) It avoids the need of recompile everything (bridge/hardware drivers, etc), just because a new decoder were added, or some other internal change were needed; 3) Better organize the ir-core API, splitting the functions that are internal to IR core and the ancillary drivers (decoders, lirc_dev) from the features that should be exported to IR subsystem clients. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 David Härdeman 提交于
drivers/media/IR/ir-raw-event.c is currently written with the assumption that all "raw" hardware will generate events only on state change (i.e. when a pulse or space starts). However, some hardware (like mceusb, probably the most popular IR receiver out there) only generates duration data (and that data is buffered so using any kind of timing on the data is futile). Furthermore, using signed int's to represent pulse/space durations is a well-known approach when writing ir decoders. With this patch: - s64 int's are used to represent pulse/space durations in ns - a workqueue is used to decode the ir protocols outside of interrupt context - #defines are added to make decoders clearer - decoder reset is implemented by passing a zero duration to the kfifo queue and decoders are updated accordingly Signed-off-by: NDavid Härdeman <david@hardeman.nu> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
drivers/media/IR/ir-sysfs.c: In function ‘store_protocol’: drivers/media/IR/ir-sysfs.c:93: warning: suggest parentheses around assignment used as truth value Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Hardware decoders have a more limited set of decoders than software ones. In general, they support just one protocol at a given time, but allow changing between a few options. Rename the previous badly named "current_protocol" as just "protocol", meaning the current protocol(s) accepted by the driver, and add a "support_protocols" to represent the entire universe of supported protocols by that specific hardware. As commented on http://lwn.net/Articles/378884/, the "one file, one value" rule doesn't fit nor does make much sense for bitmap or enum values. So, the supported_protocols will enum all supported protocols, and the protocol will present all active protocols. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Some devices have in-hardware Remote Controller decoder, while others need a software decoder to get the IR code. As each software decoder can be enabled/disabled individually, allowing multiple protocol decoding capability. On the other hand, hardware decoders have a limited protocol support, often being able of decoding just one protocol each time. So, each type needs a different set of capabilities to control the supported protocol(s). Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 David Härdeman 提交于
When the remote controller class is anyway being renamed from ir to rc this would be a good time to also rename the devices from rcrcvX to rcX. I know we haven't reached any agreement on whether transmission will eventually be handled by the same device, but this change will at least make the device name non-receive-specific which will make it possible in the future (and if a different approach is finally agreed upon, the device name still works). Signed-off-by: NDavid Härdeman <david@hardeman.nu> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Some spinlocks are not properly initialized on ir core: [ 471.714132] BUG: spinlock bad magic on CPU#0, modprobe/1899 [ 471.719838] lock: f92a08ac, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0 [ 471.727301] Pid: 1899, comm: modprobe Not tainted 2.6.33 #36 [ 471.733062] Call Trace: [ 471.735537] [<c1498793>] ? printk+0x1d/0x22 [ 471.739866] [<c12694e3>] spin_bug+0xa3/0xf0 [ 471.744224] [<c126962d>] do_raw_spin_lock+0x7d/0x160 [ 471.749364] [<f92a01ff>] ? ir_rc5_register+0x6f/0xf0 [ir_rc5_decoder] So, use static initialization for the static spinlocks, instead of the dynamic ones (currently used), as proposed by David Härdeman on one of his RFC patches. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
The patch that adds the rc-map changes didn't take into account that an a table with IR_TYPE_UNKNOWN would make change_protocol to return -EINVAL. As this function is fundamental to initialize some data, including a callback to the getkey function, this caused the driver to stop working, hanging the machine most of the times. The fix were simply to add a handler for the IR type, but, to avoid further issues, explicitly call change_protocol and handle the error before initializing the IR. Also, let input_dev to start/stop IR handling, after the opening of the input device. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Reimplement the RC-5 decoder state machine. Code is now clear, and works properly. It is also simpler than the previous implementations. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
A previous cleanup patch removed more than needed. Re-add the logic that disable the decoders. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
A few hardware Remote Controller decoders, even using a standard protocol, aren't able to provide the entire scancode. Due to that, the capability of using other IR's are limited on those hardware. Adds a way to indicate to ir-core what are the bits that the hardware provides, from a scancode, allowing the addition of a complete IR table to the kernel and allowing a limited support for changing the Remote Controller on those devices. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
The keymaps don't need to be recompiled every time a change at ir-core.h happens, since it only depends on rc-map defines. By moving those definitions to the proper header, the code became cleaner, and avoids needing to recompile all the RC maps every time a non-related change is introduced. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Now that the decoders are state machine, there's no need to create an ancillary buffer while decoding the protocol. Just call the decoders code directly, event by event. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
This decoder is also based on a state machine, just like the NEC protocol decoder. It is pedantic in the sense that accepts only 14 bits. As there are some variants that outputs less bits, it needs to be improved to also handle those. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Remove dead code and properly name a few constants Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Thanks to Andy Walls <awalls@md.metrocast.net> for pointing me his code, that gave me some ideas to better implement it. After some work with saa7134 bits, I found a way to catch both IRQ edge pulses. By enabling it, the NEC decoder can now take both pulse and spaces into account, making it more precise. Instead of the old strategy of handling the events all at once, this code implements a state machine. Due to that, it handles individual pulse or space events, validating them against the protocol, producing a much more reliable decoding. With the new implementation, the protocol trailer bits are properly handled, making possible for the repeat key to work. Also, the code is now capable of handling both NEC and NEC extended IR devices. With NEC, it produces a 16 bits code, while with NEC extended, a 24 bits code is returned. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 David Härdeman 提交于
Converts drivers/media/dvb/ttpci/budget-ci.c to use ir-core rather than rolling its own keydown timeout handler and reporting keys via drivers/media/IR/ir-functions.c. [mchehab@redhat.com: Drop the call to ir_input_init() as it is no longer needed] Signed-off-by: NDavid Härdeman <david@hardeman.nu> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 David Härdeman 提交于
Rewrites the keyup/keydown logic in drivers/media/IR/ir-keytable.c. All knowledge of keystates etc is now internal to ir-keytable.c and not scattered around ir-raw-event.c and ir-nec-decoder.c (where it doesn't belong). In addition, I've changed the API slightly so that ir_input_dev is passed as the first argument rather than input_dev. If we're ever going to support multiple keytables we need to move towards making ir_input_dev the main interface from a driver POV and obscure away the input_dev as an implementational detail in ir-core. Signed-off-by: NDavid Härdeman <david@hardeman.nu> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 David Härdeman 提交于
The attached patch rewrites much of the keytable code in drivers/media/IR/ir-keytable.c. The scancodes are now inserted into the array in sorted order which allows for a binary search on lookup. The code has also been shrunk by about 150 lines. In addition it fixes the following bugs: Any use of ir_seek_table() was racy. ir_dev->driver_name is leaked between ir_input_register() and ir_input_unregister(). ir_setkeycode() unconditionally does clear_bit() on dev->keybit when removing a mapping, but there might be another mapping with a different scancode and the same keycode. This version has been updated to incorporate patch feedback from Mauro Carvalho Chehab. [mchehab@redhat.com: Fix a conflict with RC keytable breakup patches and input changes] Signed-off-by: NDavid Härdeman <david@hardeman.nu> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
The code that enables IRQ for the Remote Controller on saa7134 is a little messy: it is outside saa7134-input, it checks if RC is GPIO based, and it mixes both serial raw decode with parallel reads from a hardware-based IR decoder. Also, currently, it doesn't allow to trigger both transition edges at GPIO16 and GPIO18 lines. A rework on the code is needed to provide a better way to specify what saa7134-input needs, maybe even moving part of the code from saa7134-core and saa7134-cards into saa7134-input. Yet, as a large rework is happening at RC core, it is better to wait until the core changes stablize, in order to rework saa7134 RC internals.While this don't happen, let's just change the logic a little bit to allow enabling IRQ to be generated on both edge transitions, in order to better support pulse/space raw decoders. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
There's an error at the IRQ2 bit map registers. Also, it doesn't show what bits are needed for positive and for negative edge. In the case of IR raw decoding, for some protocols, it is important to detect both positive and negative edges. So, a latter patch will need to use the other values. Also, the code that detects problems on IRQ handling is incomplete, as it disables only one of the IRQ bits for GPIO16 and GPIO18. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Now that the remote keymaps were broken into separate modules, get rid of the keycode tables that were hardcoded into ir-common. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Instead of using the ugly keymap sequences, use the new rc-*.ko keymap files. For now, it is still needed to have one keymap loaded, for the RC code to work. Later patches will remove this depenency. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
A latter patch will reuse the ir_input_register with a different meaning. Before it, change all occurrences to a temporary name. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
The original Remote Controller approach were very messy: a big file, that were part of ir-common kernel module, containing 64 different RC keymap tables, used by the V4L/DVB drivers. Better to break each RC keymap table into a separate module, registering them into rc core on a process similar to the fs/nls tables. As an userspace program is now in charge of loading those tables, adds an option to allow the complete removal of those tables from kernelspace. Yet, on embedded devices like Set Top Boxes and TV sets, maybe the only available input device is the IR. So, we should keep allowing the usage of in-kernel tables, but a latter patch should change the default to 'n', after giving some time for distros to add the v4l-utils with the ir-keytable program, to allow the table load via userspace. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Instead of having all RC tables hardcoded on one file with all tables there, add infrastructure for registering and dynamically load the table(s) when needed. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Instead of having one big file with lots of keytables, create one include file for each IR keymap. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
The usage of macros ensures that the proper namespace is being used by all tables. It also makes easier to associate a keytable with the name used inside the drivers. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Several DVB drivers use a different name convention. As we're moving the keytables, we need to use the same convention on all places. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Replaces most of the occurences of IR keytables on V4L drivers by a macro that evaluates to provide the name of the exported symbol. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-