- 09 3月, 2007 2 次提交
-
-
由 Kyungmin Park 提交于
Fix typo & wrong comments Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
-
由 Kyungmin Park 提交于
In oob functions, it is used main buffer instead of oob one. So fix it. Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
-
- 08 3月, 2007 38 次提交
-
-
由 Adrian Hunter 提交于
If an erase operation fails, the address at which the failure occurred is returned by the driver. The MTD partition must adjust this address (by subtracting the partition offset) before returning to the caller. This was not happening, which caused JFFS2 to mark the wrong block bad! Signed-off-by: NAdrian Hunter <ext-adrian.hunter@nokia.com> Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
-
由 David Woodhouse 提交于
The garbage collection thread is strictly an optimisation. Everything it does would also be done just-in-time in the context of something in userspace trying to access the file system. Sometimes, however, it's a pessimisation. Especially during early boot when it's checksumming nodes and scanning inodes which are shortly going to be pulled in by read_inode anyway. We end up building the rbtree of node coverage twice for the same inode. By switching to yield() instead of cond_resched() in the main loop, we observe boot times on the OLPC system going down from about 100 seconds to 60. Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
-
由 Robert P. J. Day 提交于
Replace the apparently misspelled preprocessor variable "MTD_NAND_DISKONCHIP_BBTWRITE" with the correct form "CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE". Signed-off-by: NRobert P. J. Day <rpjday@mindspring.com> Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
-
由 Alan Cox 提交于
The type of a resource could be 32 or 64bit depending upon platform or option so cast it explicitly. Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
-
由 Vijay Sampath 提交于
The files cfi_cmdset_0002.c and cfi_cmdset_0020.c do not initialize their wait queues like is done in cfi_cmdset_0001.c. This causes an oops when the wait queue is accessed. I have copied the code from cfi_cmdset_0001.c that is pertinent to initialization of the wait queue. Signed-off-by: NVijay Sampath <vsampath@gmail.com> Acked-by: NJoern Engel <joern@lazybastard.org> Acked-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
-
由 Cyrill Gorcunov 提交于
Add checking for closed ROM window on Intel ESB2 Southbridge. Signed-off-by: NCyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
-
由 Vitaly Wool 提交于
For the case when nand_write_page fail with -EIO for the first page in an eraseblock, jffs2_wbuf_recover ends up producing a BUG in jffs2_block_refile as jeb->first_node is not yet set up (it's set up later in jffs2_wbuf_recover). This BUG is not really a bug; it's just jffs2_wbuf_recover calling jffs2_block_refile with the wrong second parameter. This patch takes care of this situation. Signed-off-by: NVitaly Wool <vwool@ru.mvista.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
-
由 Vitaly Wool 提交于
During the MTD rework the oobavail parameter of mtd_info structure has become private. This is not quite correct in terms of integrity and logic. If we have means to write to OOB area, then we'd like to know upfront how many bytes out of OOB are spare per page to be able to adapt to specific cases. The patch inlined adds the public oobavail parameter. Signed-off-by: NVitaly Wool <vwool@ru.mvista.com> Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [BRIDGE]: adding new device to bridge should enable if up [IPV6]: Do not set IF_READY if device is down [IPSEC]: xfrm audit hook misplaced in pfkey_delete and xfrm_del_sa [IPSEC]: Add xfrm policy change auditing to pfkey_spdget [IPSEC]: xfrm_policy delete security check misplaced [CONNECTOR]: Bugfix for cn_call_callback() [DCCP]: Revert patch which disables bidirectional mode [IPV6]: Handle np->opt being NULL in ipv6_getsockopt_sticky(). [UDP]: Reread uh pointer after pskb_trim [NETFILTER]: nfnetlink_log: fix crash on bridged packet [NETFILTER]: nfnetlink_log: zero-terminate prefix [NETFILTER]: nf_conntrack_ipv6: fix incorrect classification of IPv6 fragments as ESTABLISHED
-
git://ftp.linux-mips.org/pub/scm/upstream-linus由 Linus Torvalds 提交于
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] ARC: Fix several compiler warnings. [MIPS] ISA: Fix typo [CHAR] ds1286: Fix handling of seconds in RTC_ALM_SET ioctl.
-
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6由 Linus Torvalds 提交于
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] fsys_getcpu for IA64 [IA64] remove duplicate declaration of efi_initialize_iomem_resources [IA64] Pick highest possible saved_max_pfn for crash_dump [IA64] fix NULL pointer in ia64/irq_chip-mask/unmask function
-
由 Ralf Baechle 提交于
CC arch/mips/arc/init.o arch/mips/arc/init.c: In function 'prom_init': arch/mips/arc/init.c:27: warning: ISO C90 forbids mixed declarations and code arch/mips/arc/init.c:35: warning: format ‘%08lx’ expects type ‘long unsigned int’, but argument 2 has type 'ULONG' arch/mips/arc/init.c:28: warning: unused variable 'c' arch/mips/arc/init.c:27: warning: unused variable ‘cnt’ Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Lost CONFIG_ prefix discovered by Robert P. J. Day <rpjday@mindspring.com>. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
o Fix use of uninitialized variable sec. o Make the RTC_ALM_SET ioctl return -EINVAL for non-zero seconds - the DS1286 has no second field for the alarm time. o Replace the obscure BIN_TO_BCD macro with BIN2BCD. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Fenghua Yu 提交于
On 1.6GHz Montectio Tiger4, the following performance data is measured with kernel built with defconfig which has NUMA configured: Fastest sys_getcpu: 502 itc counts. Fastest fsys_getcpu: 28 itc counts. fsys_getcpu performance is largly impacted by whether data (node_to_cpu_map etc) is in cache. It can take fsys_getcpu up to ~150 itc counts in cold cache case. Signed-off-by: NFenghua Yu <fenghua.yu@intel.com> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Horms 提交于
efi_initialize_iomem_resources() is declared in both include/linux/efi.h and arch/ia64/kernel/setup.c. This patch removes the latter. Signed-off-by: NSimon Horman <horms@verge.net.au> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Tony Luck 提交于
Berhhard Walle noted that on his HP rx8640 he ended up with saved_max_pfn smaller than the highest address of system ram in /proc/iomem and proposed a patch to base the address on the unrounded and unfiltered EFI memory map address. Simon Horman and Magnus Damm suggested that the whole test be moved earlier in the function. This is the combination of both of these patches. Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Aji Srinivas 提交于
One change introduced by the workqueue removal patch is that adding an interface that is up to a bridge which is also up does not ever call br_stp_enable_port(), leaving the port in DISABLED state until we do ifconfig down and up or link events occur. The following patch to the br_add_if function fixes it. This is a regression introduced in 2.6.21. Submitted-by: Aji_Srinivas@emc.com Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
Now that we add the IPv6 device at registration time we don't need to set IF_READY in ipv6_add_dev anymore because we will always get a NETDEV_UP event later on should the device ever become ready. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Paris 提交于
Inside pfkey_delete and xfrm_del_sa the audit hooks were not called if there was any permission/security failures in attempting to do the del operation (such as permission denied from security_xfrm_state_delete). This patch moves the audit hook to the exit path such that all failures (and successes) will actually get audited. Signed-off-by: NEric Paris <eparis@redhat.com> Acked-by: NVenkat Yekkirala <vyekkirala@trustedcs.com> Acked-by: NJames Morris <jmorris@namei.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Paris 提交于
pfkey_spdget neither had an LSM security hook nor auditing for the removal of xfrm_policy structs. The security hook was added when it was moved into xfrm_policy_byid instead of the callers to that function by my earlier patch and this patch adds the auditing hooks as well. Signed-off-by: NEric Paris <eparis@redhat.com> Acked-by: NVenkat Yekkirala <vyekkirala@trustedcs.com> Acked-by: NJames Morris <jmorris@namei.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Paris 提交于
The security hooks to check permissions to remove an xfrm_policy were actually done after the policy was removed. Since the unlinking and deletion are done in xfrm_policy_by* functions this moves the hooks inside those 2 functions. There we have all the information needed to do the security check and it can be done before the deletion. Since auditing requires the result of that security check err has to be passed back and forth from the xfrm_policy_by* functions. This patch also fixes a bug where a deletion that failed the security check could cause improper accounting on the xfrm_policy (xfrm_get_policy didn't have a put on the exit path for the hold taken by xfrm_policy_by*) It also fixes the return code when no policy is found in xfrm_add_pol_expire. In old code (at least back in the 2.6.18 days) err wasn't used before the return when no policy is found and so the initialization would cause err to be ENOENT. But since err has since been used above when we don't get a policy back from the xfrm_policy_by* function we would always return 0 instead of the intended ENOENT. Also fixed some white space damage in the same area. Signed-off-by: NEric Paris <eparis@redhat.com> Acked-by: NVenkat Yekkirala <vyekkirala@trustedcs.com> Acked-by: NJames Morris <jmorris@namei.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Philipp Reisner 提交于
When system under heavy stress and must allocate new work instead of reusing old one, new work must use correct completion callback. Patch is based on Philipp's and Lars' work. I only cleaned small stuff (and removed spaces instead of tabs). Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: NEvgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Gerrit Renker 提交于
This reverts an earlier patch which disabled bidirectional mode, meaning that a listening (passive) socket was not allowed to write to the other (active) end of the connection. This mode had been disabled when there were problems with CCID3, but it imposes a constraint on socket programming and thus hinders deployment. A change is included to ignore RX feedback received by the TX CCID3 module. Many thanks to Andre Noll for pointing out this issue. Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
The header may have moved when trimming. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
physoutdev is only set on purely bridged packet, when nfnetlink_log is used in the OUTPUT/FORWARD/POSTROUTING hooks on packets forwarded from or to a bridge it crashes when trying to dereference skb->nf_bridge->physoutdev. Reported by Holger Eitzenberger <heitzenberger@astaro.com> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Userspace expects a zero-terminated string, so include the trailing zero in the netlink message. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
The individual fragments of a packet reassembled by conntrack have the conntrack reference from the reassembled packet attached, but nfctinfo is not copied. This leaves it initialized to 0, which unfortunately is the value of IP_CT_ESTABLISHED. The result is that all IPv6 fragments are tracked as ESTABLISHED, allowing them to bypass a usual ruleset which accepts ESTABLISHED packets early. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 KAMEZAWA Hiroyuki 提交于
This patch fixes boot failure because irq_desc->mask() is NULL. - Added mask/unmask functions to ia64's irq desc function table. - rename hw_interrupt_type to irq_chip. hw_interrupt_type is old name. - Tony: Added same change to arch/ia64/sn/kernel/irq.c as pointed out by Eric Biederman ... mask/unmask functions there can be no-op. Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
git://www.atmel.no/~hskinnemoen/linux/kernel/avr32由 Linus Torvalds 提交于
* 'for-linus' of git://www.atmel.no/~hskinnemoen/linux/kernel/avr32: avr32: dma-mapping.h [AVR32] Don't use kmap() in flush_icache_page() [AVR32] Fix bogus ti->flags manipulation in debug handler [AVR32] Fix typo in include/asm-avr32/Kbuild [AVR32] show_trace: Only walk valid stack addresses [AVR32] at32_spi_setup_slaves should be __init
-
git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes: [GFS2] Fix bz 229873, alternate test: assertion "!ip->i_inode.i_mapping->nrpages" failed [GFS2] build fix [GFS2] go_drop_bh is never used, so remove it [GFS2] Remove unused variable [GFS2] Fix bz 229831, lookup returns wrong inode [GFS2] Fix bz 230143, incorrect flushing of rgrps [GFS2] pass formal ino in do_filldir_main [DLM] fs/dlm/user.c should #include "user.h" [GFS2] fix hangup when multiple processes are trying to write to the same file [GFS2] NFS filehandle check [GFS2] add newline to printk message [GFS2] fix locking mistake
-
由 Steven Whitehouse 提交于
The following removes an incorrect assertion from the GFS2 glops code. This fixes Red Hat bz 229873. Thanks to Abhijith Das for testing the patch and confirming the fix. Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com> Cc: Abhijith Das <adas@redhat.com>
-
fs/gfs2/glock.c:2198: error: 'THIS_MODULE' undeclared here (not in a function) Cc: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
-
由 Steven Whitehouse 提交于
The ->go_drop_bh function is never used, so this removes it and the single caller, Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
Remove an unused variable. Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
The following patch fixes Red Hat bz 229831. Without this patch its possible for the wrong inode to be returned in certain cases. It is a pretty unusual event, so that its taken some time to track down. Thanks and due to Josef Whiter who did a lot of the testing required to thrack this down and fix it. Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
The below patch fixes a problem where we were not flushing rgrps correctly. It only occurred in the specific case that a callback was received for an rgrp which was dirty and when a journal log flush had not already resulted in the rgrp being flushed anyway. This fixes Red Hat bz 230143, Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-