- 26 7月, 2013 1 次提交
-
-
由 Alex Deucher 提交于
Need to set high for the last two entries. Looks like a copy and paste typo. Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 23 7月, 2013 6 次提交
-
-
由 Mark Kettenis 提交于
Noticed that my old Radeon 7500 hung after printing drm: GPU not posted. posting now... when it wasn't selected as the primary card the BIOS. Some digging revealed that it was hanging in combios_parse_mmio_table() while parsing the ASIC INIT 3 table. Looking at the BIOS ROM for the card, it becomes obvious that there is no ASIC INIT 3 table in the BIOS. The code is just processing random garbage. No surprise it hangs! Why do I say that there is no ASIC INIT 3 table is the BIOS? This table is found through the MISC INFO table. The MISC INFO table can be found at offset 0x5e in the COMBIOS header. But the header is smaller than that. The COMBIOS header starts at offset 0x126. The standard PCI Data Structure (the bit that starts with 'PCIR') lives at offset 0x180. That means that the COMBIOS header can not be larger than 0x5a bytes and therefore cannot contain a MISC INFO table. I looked at a dozen or so BIOS images, some my own, some downloaded from: <http://www.techpowerup.com/vgabios/index.php?manufacturer=ATI&page=1> It is fairly obvious that the size of the COMBIOS header can be found at offset 0x6 of the header. Not sure if it is a 16-bit number or just an 8-bit number, but that doesn't really matter since the tables seems to be always smaller than 256 bytes. So I think combios_get_table_offset() should check if the requested table is present. This can be done by checking the offset against the size of the header. See the diff below. The diff is against the WIP OpenBSD codebase that roughly corresponds to Linux 3.8.13 at this point. But I don't think this bit of the code changed much since then. For what it is worth: Signed-off-by: NMark Kettenis <kettenis@openbsd.org> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
由 Alex Deucher 提交于
Hopefully avoid more quirks in the future due to bogus vbios dac data. Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
由 Ondrej Zary 提交于
Hello, got another card with "too bright" problem: Sapphire Radeon VE 7000 DDR (VGA+S-Video) lspci -vnn: 01:00.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI RV100 QY [Radeon 7000/VE] [1002:5159] (prog-if 00 [VGA controller]) Subsystem: PC Partner Limited Sapphire Radeon VE 7000 DDR [174b:7c28] The patch below fixes the problem for this card. But I don't like the blacklist, couldn't some heuristic be used instead? The interesting thing is that the manufacturer is the same as the other card needing the same quirk. I wonder how many different types are broken this way. The "wrong" ps2_pdac_adj value that comes from BIOS on this card is 0x300. ==================== drm/radeon: Add primary dac adj quirk for Sapphire Radeon VE 7000 DDR Values from BIOS are wrong, causing too bright colors. Use default values instead. Signed-off-by: NOndrej Zary <linux@rainbow-software.org> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
由 Alex Deucher 提交于
The atom interpreter expects data in LE format, so swap the message buffer as apprioriate. v2: properly handle non-dw aligned byte counts. v3: properly handle remainder Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: Dong He <hedonghust@gmail.com> Cc: stable@vger.kernel.org
-
由 Alex Deucher 提交于
fixes: https://bugs.freedesktop.org/show_bug.cgi?id=67016Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
由 Alex Deucher 提交于
Make sure the 3D engine is idle before using CP DMA for bo copies. Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: Marek Olšák <maraeo@gmail.com>
-
- 22 7月, 2013 5 次提交
-
-
由 Dave Airlie 提交于
Merge tag 'drm-intel-fixes-2013-07-22' of git://people.freedesktop.org/~danvet/drm-intel into drm-fixes - fixup panel fitter readout for gen2/3 (just quitens dmesg noise) - fix pft computations for non-autoscaled resolutions (i.e. letter/pillar boxing on gen2/3) - preserve the DDI A/E lane sharing bit (Stéphane Marchesin) - fix the "rc6 fails to work after resume" regression, big thanks to Konstantin Khlebnikov for the patch and debug insight about what actually might be going on here - fix Oops in is_crtc_connector_off (Chris) - sanitize shared dpll state - our new paranoid state checker tripped up over dirt left behind by the BIOS - correctly restore fences, fixes the "my screen is all messed up after resume" regression introduced in the final 3.10 pull request - quirk backlights harder, this time for Dell XPS13 machines to fix a regression (patch from Kamal Mostafa) - 90% fix for some haswell hangs when accessing registers concurrently, the 100% solution is simply too invasive for -fixes and what we have here seems to be good enough (Chris) * tag 'drm-intel-fixes-2013-07-22' of git://people.freedesktop.org/~danvet/drm-intel: drm/i915: fix up gt init sequence fallout drm/i915: Serialize almost all register access drm/i915: quirk no PCH_PWM_ENABLE for Dell XPS13 backlight drm/i915: correctly restore fences with objects attached drm/i915: Fix dereferencing invalid connectors in is_crtc_connector_off() drm/i915: Sanitize shared dpll state drm/i915: fix long-standing SNB regression in power consumption after resume v2 drm/i915: Preserve the DDI_A_4_LANES bit from the bios drm/i915: fix pfit regression for non-autoscaled resolutions drm/i915: fix up readout of the lvds dither bit on gen2/3
-
git://anongit.freedesktop.org/git/nouveau/linux-2.6由 Dave Airlie 提交于
Fixes for some locking issues, and fence timeouts. * 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: drm/nouveau: do not allow negative sizes for now drm/nouveau: add falcon interrupt handler drm/nouveau: use dedicated channel for async moves on GT/GF chipsets. drm/nouveau: bump fence timeout to 15 seconds drm/nouveau: do not unpin in nouveau_gem_object_del drm/nv50/kms: fix pin refcnt leaks drm/nouveau: fix some error-path leaks in fbcon handling code drm/nouveau: fix locking issues in page flipping paths
-
由 Daniel Vetter 提交于
Atm the crtc helper implementation of set_config has really inconsisten semantics: If just an fb update is good enough, dpms state will be left as-is, but if we do a full modeset we force everything to dpms on. This change has already been applied to the i915 modeset code in commit e3de42b6 Author: Imre Deak <imre.deak@intel.com> Date: Fri May 3 19:44:07 2013 +0200 drm/i915: force full modeset if the connector is in DPMS OFF mode which according to Greg KH seems to aim for a new record in most Bugzilla: links in a commit message. The history of this dpms forcing is pretty interesting. This patch here is an almost-revert of commit 811aaa55 Author: Keith Packard <keithp@keithp.com> Date: Thu Feb 3 16:57:28 2011 -0800 drm: Only set DPMS ON when actually configuring a mode which fixed the bug of trying to dpms on disabled outputs, but introduced the new discrepancy between an fb update only and full modesets. The actual introduction of this goes back to commit bf9dc102 Author: Keith Packard <keithp@keithp.com> Date: Fri Nov 26 10:45:58 2010 -0800 drm: Set connector DPMS status to ON in drm_crtc_helper_set_config And if you'd dig around in the i915 driver code there's even more fun around forcing dpms on and losing our heads and temper of the resulting inconsistencies. Especially the DP re-training code had tons of funny stuff in it. v2: So v1 totally blew up on resume on my radeon system here. After much head-scraching I've figured out that the radeon resume functions resumes the console system _before_ it actually restores all the modeset state. And resuming the console systems means that fbdev doeas an immediate ->set_par call. Now up to this patch that ->set_par did absolutely nothing: All the old sw state from pre-suspend was still around (since the modeset reset wasn't done yet), which means that the set_config calls done as a result of the ->set_par where all treated as no-ops (despite that the real hw state was obviously something completely different). Since v1 of this patch just added a bunch of ->dpms calls if the crtc was enabled, those set_config calls suddenly stopped being no-ops. But because the hw state wasn't restored the ->dpms callbacks resulted in decent amounts of hilarity and eventual full hangs. Since I can't review all kms drivers for such tricky ordering constraints v2 opts for a different approach and forces a full modeset if the connector dpms state isnt' DPMS_ON. Since the ->dpms callbacks implemented by the modeset helpers update the connector->dpms property we have the same effect of ensuring that the pipe is ultimately turned on, even if we just end up updating the fb. This is the same approac we ended up using in the intel driver. Note that besides i915.ko only all other drivers eventually call drm_helper_connector_dpms with the exception of vmwgfx, which does not support dmps at all. v3: Dave Airlie merged the broken first version of this patch, so squash in the revert of commit 372835a8 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Sat Jun 15 00:13:13 2013 +0200 drm/crtc-helper: explicit DPMS on after modeset Also fix up the spelling fail a bit in the commit message while at it. Cc: Dave Airlie <airlied@redhat.com> Reviewed-by: NAlex Deucher <alexdeucher@gmail.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=67043Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm由 Linus Torvalds 提交于
Pull ACPI video support fixes from Rafael Wysocki: "I'm sending a separate pull request for this as it may be somewhat controversial. The breakage addressed here is not really new and the fixes may not satisfy all users of the affected systems, but we've had so much back and forth dance in this area over the last several weeks that I think it's time to actually make some progress. The source of the problem is that about a year ago we started to tell BIOSes that we're compatible with Windows 8, which we really need to do, because some systems shipping with Windows 8 are tested with it and nothing else, so if we tell their BIOSes that we aren't compatible with Windows 8, we expose our users to untested BIOS/AML code paths. However, as it turns out, some Windows 8-specific AML code paths are not tested either, because Windows 8 actually doesn't use the ACPI methods containing them, so if we declare Windows 8 compatibility and attempt to use those ACPI methods, things break. That occurs mostly in the backlight support area where in particular the _BCM and _BQC methods are plain unusable on some systems if the OS declares Windows 8 compatibility. [ The additional twist is that they actually become usable if the OS says it is not compatible with Windows 8, but that may cause problems to show up elsewhere ] Investigation carried out by Matthew Garrett indicates that what Windows 8 does about backlight is to leave backlight control up to individual graphics drivers. At least there's evidence that it does that if the Intel graphics driver is used, so we've decided to follow Windows 8 in that respect and allow i915 to control backlight (Daniel likes that part). The first commit from Aaron Lu makes ACPICA export the variable from which we can infer whether or not the BIOS believes that we are compatible with Windows 8. The second commit from Matthew Garrett prepares the ACPI video driver by making it initialize the ACPI backlight even if it is not going to be used afterward (that is needed for backlight control to work on Thinkpads). The third commit implements the actual workaround making i915 take over backlight control if the firmware thinks it's dealing with Windows 8 and is based on the work of multiple developers, including Matthew Garrett, Chun-Yi Lee, Seth Forshee, and Aaron Lu. The final commit from Aaron Lu makes us follow Windows 8 by informing the firmware through the _DOS method that it should not carry out automatic brightness changes, so that brightness can be controlled by GUI. Hopefully, this approach will allow us to avoid using blacklists of systems that should not declare Windows 8 compatibility just to avoid backlight control problems in the future. - Change from Aaron Lu makes ACPICA export a variable which can be used by driver code to determine whether or not the BIOS believes that we are compatible with Windows 8. - Change from Matthew Garrett makes the ACPI video driver initialize the ACPI backlight even if it is not going to be used afterward (that is needed for backlight control to work on Thinkpads). - Fix from Rafael J Wysocki implements Windows 8 backlight support workaround making i915 take over bakclight control if the firmware thinks it's dealing with Windows 8. Based on the work of multiple developers including Matthew Garrett, Chun-Yi Lee, Seth Forshee, and Aaron Lu. - Fix from Aaron Lu makes the kernel follow Windows 8 by informing the firmware through the _DOS method that it should not carry out automatic brightness changes, so that brightness can be controlled by GUI" * tag 'acpi-video-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / video: no automatic brightness changes by win8-compatible firmware ACPI / video / i915: No ACPI backlight if firmware expects Windows 8 ACPI / video: Always call acpi_video_init_brightness() on init ACPICA: expose OSI version
-
- 21 7月, 2013 9 次提交
-
-
由 Daniel Vetter 提交于
The regression fix for gen6+ rps fallout commit 7dcd2677 Author: Konstantin Khlebnikov <khlebnikov@openvz.org> Date: Wed Jul 17 10:22:58 2013 +0400 drm/i915: fix long-standing SNB regression in power consumption after resume unintentionally also changed the init sequence ordering between gt_init and gt_reset - we need to reset BIOS damage like leftover forcewake references before we run our own code. Otherwise we can get nasty dmesg noise like [drm:__gen6_gt_force_wake_mt_get] *ERROR* Timed out waiting for forcewake old ack to clear. again. Since _reset suggests that we first need to have stuff initialized (which isn't the case here) call it sanitze instead. While at it also block out the rps disable introduced by the above commit on ilk: We don't have any knowledge of ilk rps being broken in similar ways. And the disable functions uses the default hw state which is only read out when we're enabling rps. So essentially we've been writing random grabage into that register. Reported-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: stable@vger.kernel.org Tested-by: NChris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4由 Linus Torvalds 提交于
Pull ext[34] tmpfile bugfix from Ted Ts'o: "Fix regression caused by commit af51a2ac which added ->tmpfile() support (along with a similar fix for ext3)" * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext3: fix a BUG when opening a file with O_TMPFILE flag ext4: fix a BUG when opening a file with O_TMPFILE flag
-
由 Zheng Liu 提交于
When we try to open a file with O_TMPFILE flag, we will trigger a bug. The root cause is that in ext4_orphan_add() we check ->i_nlink == 0 and this check always fails because we set ->i_nlink = 1 in inode_init_always(). We can use the following program to trigger it: int main(int argc, char *argv[]) { int fd; fd = open(argv[1], O_TMPFILE, 0666); if (fd < 0) { perror("open "); return -1; } close(fd); return 0; } The oops message looks like this: kernel: kernel BUG at fs/ext3/namei.c:1992! kernel: invalid opcode: 0000 [#1] SMP kernel: Modules linked in: ext4 jbd2 crc16 cpufreq_ondemand ipv6 dm_mirror dm_region_hash dm_log dm_mod parport_pc parport serio_raw sg dcdbas pcspkr i2c_i801 ehci_pci ehci_hcd button acpi_cpufreq mperf e1000e ptp pps_core ttm drm_kms_helper drm hwmon i2c_algo_bit i2c_core ext3 jbd sd_mod ahci libahci libata scsi_mod uhci_hcd kernel: CPU: 0 PID: 2882 Comm: tst_tmpfile Not tainted 3.11.0-rc1+ #4 kernel: Hardware name: Dell Inc. OptiPlex 780 /0V4W66, BIOS A05 08/11/2010 kernel: task: ffff880112d30050 ti: ffff8801124d4000 task.ti: ffff8801124d4000 kernel: RIP: 0010:[<ffffffffa00db5ae>] [<ffffffffa00db5ae>] ext3_orphan_add+0x6a/0x1eb [ext3] kernel: RSP: 0018:ffff8801124d5cc8 EFLAGS: 00010202 kernel: RAX: 0000000000000000 RBX: ffff880111510128 RCX: ffff8801114683a0 kernel: RDX: 0000000000000000 RSI: ffff880111510128 RDI: ffff88010fcf65a8 kernel: RBP: ffff8801124d5d18 R08: 0080000000000000 R09: ffffffffa00d3b7f kernel: R10: ffff8801114683a0 R11: ffff8801032a2558 R12: 0000000000000000 kernel: R13: ffff88010fcf6800 R14: ffff8801032a2558 R15: ffff8801115100d8 kernel: FS: 00007f5d172b5700(0000) GS:ffff880117c00000(0000) knlGS:0000000000000000 kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b kernel: CR2: 00007f5d16df15d0 CR3: 0000000110b1d000 CR4: 00000000000407f0 kernel: Stack: kernel: 000000000000000c ffff8801048a7dc8 ffff8801114685a8 ffffffffa00b80d7 kernel: ffff8801124d5e38 ffff8801032a2558 ffff88010ce24d68 0000000000000000 kernel: ffff88011146b300 ffff8801124d5d44 ffff8801124d5d78 ffffffffa00db7e1 kernel: Call Trace: kernel: [<ffffffffa00b80d7>] ? journal_start+0x8c/0xbd [jbd] kernel: [<ffffffffa00db7e1>] ext3_tmpfile+0xb2/0x13b [ext3] kernel: [<ffffffff821076f8>] path_openat+0x11f/0x5e7 kernel: [<ffffffff821c86b4>] ? list_del+0x11/0x30 kernel: [<ffffffff82065fa2>] ? __dequeue_entity+0x33/0x38 kernel: [<ffffffff82107cd5>] do_filp_open+0x3f/0x8d kernel: [<ffffffff82112532>] ? __alloc_fd+0x50/0x102 kernel: [<ffffffff820f9296>] do_sys_open+0x13b/0x1cd kernel: [<ffffffff820f935c>] SyS_open+0x1e/0x20 kernel: [<ffffffff82398c02>] system_call_fastpath+0x16/0x1b kernel: Code: 39 c7 0f 85 67 01 00 00 0f b7 03 25 00 f0 00 00 3d 00 40 00 00 74 18 3d 00 80 00 00 74 11 3d 00 a0 00 00 74 0a 83 7b 48 00 74 04 <0f> 0b eb fe 49 8b 85 50 03 00 00 4c 89 f6 48 c7 c7 c0 99 0e a0 kernel: RIP [<ffffffffa00db5ae>] ext3_orphan_add+0x6a/0x1eb [ext3] kernel: RSP <ffff8801124d5cc8> Here we couldn't call clear_nlink() directly because in d_tmpfile() we will call inode_dec_link_count() to decrease ->i_nlink. So this commit tries to call d_tmpfile() before ext4_orphan_add() to fix this problem. Signed-off-by: NZheng Liu <wenqing.lz@taobao.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Cc: Jan Kara <jack@suse.cz> Cc: Al Viro <viro@zeniv.linux.org.uk>
-
由 Zheng Liu 提交于
When we try to open a file with O_TMPFILE flag, we will trigger a bug. The root cause is that in ext4_orphan_add() we check ->i_nlink == 0 and this check always fails because we set ->i_nlink = 1 in inode_init_always(). We can use the following program to trigger it: int main(int argc, char *argv[]) { int fd; fd = open(argv[1], O_TMPFILE, 0666); if (fd < 0) { perror("open "); return -1; } close(fd); return 0; } The oops message looks like this: kernel BUG at fs/ext4/namei.c:2572! invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC Modules linked in: dlci bridge stp hidp cmtp kernelcapi l2tp_ppp l2tp_netlink l2tp_core sctp libcrc32c rfcomm tun fuse nfnetli nk can_raw ipt_ULOG can_bcm x25 scsi_transport_iscsi ipx p8023 p8022 appletalk phonet psnap vmw_vsock_vmci_transport af_key vmw_vmci rose vsock atm can netrom ax25 af_rxrpc ir da pppoe pppox ppp_generic slhc bluetooth nfc rfkill rds caif_socket caif crc_ccitt af_802154 llc2 llc snd_hda_codec_realtek snd_hda_intel snd_hda_codec serio_raw snd_pcm pcsp kr edac_core snd_page_alloc snd_timer snd soundcore r8169 mii sr_mod cdrom pata_atiixp radeon backlight drm_kms_helper ttm CPU: 1 PID: 1812571 Comm: trinity-child2 Not tainted 3.11.0-rc1+ #12 Hardware name: Gigabyte Technology Co., Ltd. GA-MA78GM-S2H/GA-MA78GM-S2H, BIOS F12a 04/23/2010 task: ffff88007dfe69a0 ti: ffff88010f7b6000 task.ti: ffff88010f7b6000 RIP: 0010:[<ffffffff8125ce69>] [<ffffffff8125ce69>] ext4_orphan_add+0x299/0x2b0 RSP: 0018:ffff88010f7b7cf8 EFLAGS: 00010202 RAX: 0000000000000000 RBX: ffff8800966d3020 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff88007dfe70b8 RDI: 0000000000000001 RBP: ffff88010f7b7d40 R08: ffff880126a3c4e0 R09: ffff88010f7b7ca0 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8801271fd668 R13: ffff8800966d2f78 R14: ffff88011d7089f0 R15: ffff88007dfe69a0 FS: 00007f70441a3740(0000) GS:ffff88012a800000(0000) knlGS:00000000f77c96c0 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000002834000 CR3: 0000000107964000 CR4: 00000000000007e0 DR0: 0000000000780000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000600 Stack: 0000000000002000 00000020810b6dde 0000000000000000 ffff88011d46db00 ffff8800966d3020 ffff88011d7089f0 ffff88009c7f4c10 ffff88010f7b7f2c ffff88007dfe69a0 ffff88010f7b7da8 ffffffff8125cfac ffff880100000004 Call Trace: [<ffffffff8125cfac>] ext4_tmpfile+0x12c/0x180 [<ffffffff811cba78>] path_openat+0x238/0x700 [<ffffffff8100afc4>] ? native_sched_clock+0x24/0x80 [<ffffffff811cc647>] do_filp_open+0x47/0xa0 [<ffffffff811db73f>] ? __alloc_fd+0xaf/0x200 [<ffffffff811ba2e4>] do_sys_open+0x124/0x210 [<ffffffff81010725>] ? syscall_trace_enter+0x25/0x290 [<ffffffff811ba3ee>] SyS_open+0x1e/0x20 [<ffffffff816ca8d4>] tracesys+0xdd/0xe2 [<ffffffff81001001>] ? start_thread_common.constprop.6+0x1/0xa0 Code: 04 00 00 00 89 04 24 31 c0 e8 c4 77 04 00 e9 43 fe ff ff 66 25 00 d0 66 3d 00 80 0f 84 0e fe ff ff 83 7b 48 00 0f 84 04 fe ff ff <0f> 0b 49 8b 8c 24 50 07 00 00 e9 88 fe ff ff 0f 1f 84 00 00 00 Here we couldn't call clear_nlink() directly because in d_tmpfile() we will call inode_dec_link_count() to decrease ->i_nlink. So this commit tries to call d_tmpfile() before ext4_orphan_add() to fix this problem. Reported-by: NDave Jones <davej@redhat.com> Signed-off-by: NZheng Liu <wenqing.lz@taobao.com> Tested-by: NDarrick J. Wong <darrick.wong@oracle.com> Tested-by: NDave Jones <davej@redhat.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Acked-by: NAl Viro <viro@zeniv.linux.org.uk>
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging由 Linus Torvalds 提交于
Pull staging tree fixes from Greg KH: "Here are a few iio driver fixes for 3.11-rc2. They are still spread across drivers/iio and drivers/staging/iio so they are coming in through this tree. I've also removed the drivers/staging/csr/ driver as the developers who originally sent it to me have moved on to other companies, and CSR still will not send us the specs for the device, making the driver pretty much obsolete and impossible to fix up. Deleting it now prevents people from sending in lots of tiny codingsyle fixes that will never go anywhere. It also helps to offset the large lustre filesystem merge that happened in 3.11-rc1 in the overall 3.11.0 diffstat. :)" * tag 'staging-3.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: csr: remove driver iio: lps331ap: Fix wrong in_pressure_scale output value iio staging: fix lis3l02dq, read error handling staging:iio:ad7291: add missing .driver_module to struct iio_info iio: ti_am335x_adc: add missing .driver_module to struct iio_info iio: mxs-lradc: Remove useless check in read_raw iio: mxs-lradc: Fix misuse of iio->trig iio: inkern: fix iio_convert_raw_to_processed_unlocked iio: Fix iio_channel_has_info iio:trigger: device_unregister->device_del to avoid double free iio: dac: ad7303: fix error return code in ad7303_probe()
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs由 Linus Torvalds 提交于
Pull vfs fixes from Al Viro: "The sget() one is a long-standing bug and will need to go into -stable (in fact, it had been originally caught in RHEL6), the other two are 3.11-only" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: vfs: constify dentry parameter in d_count() livelock avoidance in sget() allow O_TMPFILE to work with O_WRONLY
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4由 Linus Torvalds 提交于
Pull ext4 bugfixes from Ted Ts'o: "Fixes for 3.11-rc2, sent at 5pm, in the professoinal style. :-)" I'm not sure I like this new level of "professionalism". 9-5, people, 9-5. * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: call ext4_es_lru_add() after handling cache miss ext4: yield during large unlinks ext4: make the extent_status code more robust against ENOMEM failures ext4: simplify calculation of blocks to free on error ext4: fix error handling in ext4_ext_truncate()
-
git://git.linux-nfs.org/projects/trondmy/linux-nfs由 Linus Torvalds 提交于
Pull NFS client bugfixes from Trond Myklebust: - Fix a regression against NFSv4 FreeBSD servers when creating a new file - Fix another regression in rpc_client_register() * tag 'nfs-for-3.11-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFSv4: Fix a regression against the FreeBSD server SUNRPC: Fix another issue with rpc_client_register()
-
git://git.kernel.org/pub/scm/linux/kernel/git/josef/btrfs-next由 Linus Torvalds 提交于
Pull btrfs fixes from Josef Bacik: "I'm playing the role of Chris Mason this week while he's on vacation. There are a few critical fixes for btrfs here, all regressions and have been tested well" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/josef/btrfs-next: Btrfs: fix wrong write offset when replacing a device Btrfs: re-add root to dead root list if we stop dropping it Btrfs: fix lock leak when resuming snapshot deletion Btrfs: update drop progress before stopping snapshot dropping
-
- 20 7月, 2013 15 次提交
-
-
由 Chris Wilson 提交于
In theory, the different register blocks were meant to be only ever touched when holding either the struct_mutex, mode_config.lock or even a specific localised lock. This does not seem to be the case, and the hardware reacts extremely badly if we attempt to concurrently access two registers within the same cacheline. The HSD suggests that we only need to do this workaround for display range registers. However, upon review we need to serialize the multiple stages in our register write functions - if only for preemption protection. Irrespective of the hardware requirements, the current io functions are a little too loose with respect to the combination of pre- and post-condition testing that we do in conjunction with the actual io. As a result, we may be pre-empted and generate both false-postive and false-negative errors. Note well that this is a "90%" solution, there remains a few direct users of ioread/iowrite which will be fixed up in the next few patches. Since they are more invasive and that this simple change will prevent almost all lockups on Haswell, we kept this patch simple to facilitate backporting to stable. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=63914Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: stable@vger.kernel.org Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Kamal Mostafa 提交于
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=47941 BugLink: https://bugs.launchpad.net/bugs/1163720 BugLink: https://bugs.launchpad.net/bugs/1162026 Some machines suffer from non-functional backlight controls if BLM_PCH_PWM_ENABLE is set, so provide a quirk to avoid doing so. Apply this quirk to Dell XPS 13 models. Tested-by: NEric Griffith <EGriffith92@gmail.com> Tested-by: NKent Baxley <kent.baxley@canonical.com> Cc: <stable@vger.kernel.org> # v3.8+ Signed-off-by: NKamal Mostafa <kamal@canonical.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Peng Tao 提交于
so that it can be used in places like d_compare/d_hash without causing a compiler warning. Signed-off-by: NPeng Tao <tao.peng@emc.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Eric Sandeen has found a nasty livelock in sget() - take a mount(2) about to fail. The superblock is on ->fs_supers, ->s_umount is held exclusive, ->s_active is 1. Along comes two more processes, trying to mount the same thing; sget() in each is picking that superblock, bumping ->s_count and trying to grab ->s_umount. ->s_active is 3 now. Original mount(2) finally gets to deactivate_locked_super() on failure; ->s_active is 2, superblock is still ->fs_supers because shutdown will *not* happen until ->s_active hits 0. ->s_umount is dropped and now we have two processes chasing each other: s_active = 2, A acquired ->s_umount, B blocked A sees that the damn thing is stillborn, does deactivate_locked_super() s_active = 1, A drops ->s_umount, B gets it A restarts the search and finds the same superblock. And bumps it ->s_active. s_active = 2, B holds ->s_umount, A blocked on trying to get it ... and we are in the earlier situation with A and B switched places. The root cause, of course, is that ->s_active should not grow until we'd got MS_BORN. Then failing ->mount() will have deactivate_locked_super() shut the damn thing down. Fortunately, it's easy to do - the key point is that grab_super() is called only for superblocks currently on ->fs_supers, so it can bump ->s_count and grab ->s_umount first, then check MS_BORN and bump ->s_active; we must never increment ->s_count for superblocks past ->kill_sb(), but grab_super() is never called for those. The bug is pretty old; we would've caught it by now, if not for accidental exclusion between sget() for block filesystems; the things like cgroup or e.g. mtd-based filesystems don't have anything of that sort, so they get bitten. The right way to deal with that is obviously to fix sget()... Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml由 Linus Torvalds 提交于
Pull UML fixes from Richard Weinberger: "Special thanks goes to Toralf Föster for continuously testing UML and reporting issues!" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: um: remove dead code um: siginfo cleanup uml: Fix which_tmpdir failure when /dev/shm is a symlink, and in other edge cases um: Fix wait_stub_done() error handling um: Mark stub pages mapping with VM_PFNMAP um: Fix return value of strnlen_user()
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linus由 Linus Torvalds 提交于
Pull MIPS fixes from Ralf Baechle: "MIPS fixes for 3.11. Half of then is for Netlogic the remainder touches things across arch/mips. Nothing really dramatic and by rc1 standards MIPS will be in fairly good shape with this applied. Tested by building all MIPS defconfigs of which with this pull request four platforms won't build. And yes, it boots also on my favorite test systems" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: kvm: Kconfig: Drop HAVE_KVM dependency from VIRTUALIZATION MIPS: Octeon: Fix DT pruning bug with pip ports MIPS: KVM: Mark KVM_GUEST (T&E KVM) as BROKEN_ON_SMP MIPS: tlbex: fix broken build in v3.11-rc1 MIPS: Netlogic: Add XLP PIC irqdomain MIPS: Netlogic: Fix USB block's coherent DMA mask MIPS: tlbex: Fix typo in r3000 tlb store handler MIPS: BMIPS: Fix thinko to release slave TP from reset MIPS: Delete dead invocation of exception_exit().
-
git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64由 Linus Torvalds 提交于
Pull arm64 fixes from Catalin Marinas: - Post -rc1 update to the common reboot infrastructure. - Fixes (user cache maintenance fault handling, !COMPAT compilation, CPU online and interrupt hanlding). * tag 'arm64-stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64: arm64: use common reboot infrastructure arm64: mm: don't treat user cache maintenance faults as writes arm64: add '#ifdef CONFIG_COMPAT' for aarch32_break_handler() arm64: Only enable local interrupts after the CPU is marked online
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux由 Linus Torvalds 提交于
Pull s390 fixes from Martin Schwidefsky: "An update for the BFP jit to the latest and greatest, two patches to get kdump working again, the random-abort ptrace extention for transactional execution, the z90crypt module alias for ap and a tiny cleanup" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/zcrypt: Alias for new zcrypt device driver base module s390/kdump: Allow copy_oldmem_page() copy to virtual memory s390/kdump: Disable mmap for s390 s390/bpf,jit: add pkt_type support s390/bpf,jit: address randomize and write protect jit code s390/bpf,jit: use generic jit dumper s390/bpf,jit: call module_free() from any context s390/qdio: remove unused variable s390/ptrace: PTRACE_TE_ABORT_RAND
-
由 Stefan Behrens 提交于
Miao Xie reported the following issue: The filesystem was corrupted after we did a device replace. Steps to reproduce: # mkfs.btrfs -f -m single -d raid10 <device0>..<device3> # mount <device0> <mnt> # btrfs replace start -rfB 1 <device4> <mnt> # umount <mnt> # btrfsck <device4> The reason for the issue is that we changed the write offset by mistake, introduced by commit 625f1c8d. We read the data from the source device at first, and then write the data into the corresponding place of the new device. In order to implement the "-r" option, the source location is remapped using btrfs_map_block(). The read takes place on the mapped location, and the write needs to take place on the unmapped location. Currently the write is using the mapped location, and this commit changes it back by undoing the change to the write address that the aforementioned commit added by mistake. Reported-by: NMiao Xie <miaox@cn.fujitsu.com> Cc: <stable@vger.kernel.org> # 3.10+ Signed-off-by: NStefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
-
由 Josef Bacik 提交于
If we stop dropping a root for whatever reason we need to add it back to the dead root list so that we will re-start the dropping next transaction commit. The other case this happens is if we recover a drop because we will add a root without adding it to the fs radix tree, so we can leak it's root and commit root extent buffer, adding this to the dead root list makes this cleanup happen. Thanks, Cc: stable@vger.kernel.org Reported-by: NAlex Lyakas <alex.btrfs@zadarastorage.com> Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
-
由 Josef Bacik 提交于
We aren't setting path->locks[level] when we resume a snapshot deletion which means we won't unlock the buffer when we free the path. This causes deadlocks if we happen to re-allocate the block before we've evicted the extent buffer from cache. Thanks, Cc: stable@vger.kernel.org Reported-by: NAlex Lyakas <alex.btrfs@zadarastorage.com> Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
-
由 Josef Bacik 提交于
Alex pointed out a problem and fix that exists in the drop one snapshot at a time patch. If we decide we need to exit for whatever reason (umount for example) we will just exit the snapshot dropping without updating the drop progress. So the next time we go to resume we will BUG_ON() because we can't find the extent we left off at because we never updated it. This patch fixes the problem. Cc: stable@vger.kernel.org Reported-by: NAlex Lyakas <alex.btrfs@zadarastorage.com> Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
-
git://git.kernel.org/pub/scm/virt/kvm/kvm由 Linus Torvalds 提交于
Pull KVM fix from Paolo Bonzini: "This single patch fixes a regression caused by one of the optimizations introduced in 3.11, which is generally visible only on AMD processors" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: MMU: avoid fast page fault fixing mmio page fault
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm由 Linus Torvalds 提交于
Pull power management and ACPI fixes from Rafael Wysocki: "These are fixes collected over the last week, most importnatly two cpufreq reverts fixing regressions introduced in 3.10, an autoseelp fix preventing systems using it from crashing during shutdown and two ACPI scan fixes related to hotplug. Specifics: - Two cpufreq commits from the 3.10 cycle introduced regressions. The first of them was buggy (it did way much more than it needed to do) and the second one attempted to fix an issue introduced by the first one. Fixes from Srivatsa S Bhat revert both. - If autosleep triggers during system shutdown and the shutdown callbacks of some device drivers have been called already, it may crash the system. Fix from Liu Shuo prevents that from happening by making try_to_suspend() check system_state. - The ACPI memory hotplug driver doesn't clear its driver_data on errors which may cause a NULL poiter dereference to happen later. Fix from Toshi Kani. - The ACPI namespace scanning code should not try to attach scan handlers to device objects that have them already, which may confuse things quite a bit, and it should rescan the whole namespace branch starting at the given node after receiving a bus check notify event even if the device at that particular node has been discovered already. Fixes from Rafael J Wysocki. - New ACPI video blacklist entry for a system whose initial backlight setting from the BIOS doesn't make sense. From Lan Tianyu. - Garbage string output avoindance for ACPI PNP from Liu Shuo. - Two Kconfig fixes for issues introduced recently in the s3c24xx cpufreq driver (when moving the driver to drivers/cpufreq) from Paul Bolle. - Trivial comment fix in pm_wakeup.h from Chanwoo Choi" * tag 'pm+acpi-3.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / video: ignore BIOS initial backlight value for Fujitsu E753 PNP / ACPI: avoid garbage in resource name cpufreq: Revert commit 2f7021a8 to fix CPU hotplug regression cpufreq: s3c24xx: fix "depends on ARM_S3C24XX" in Kconfig cpufreq: s3c24xx: rename CONFIG_CPU_FREQ_S3C24XX_DEBUGFS PM / Sleep: Fix comment typo in pm_wakeup.h PM / Sleep: avoid 'autosleep' in shutdown progress cpufreq: Revert commit a66b2e to fix suspend/resume regression ACPI / memhotplug: Fix a stale pointer in error path ACPI / scan: Always call acpi_bus_scan() for bus check notifications ACPI / scan: Do not try to attach scan handlers to devices having them
-
- 19 7月, 2013 4 次提交
-
-
由 Marc Zyngier 提交于
Commit 7b6d864b (reboot: arm: change reboot_mode to use enum reboot_mode) changed the way reboot is handled on arm, which has a direct impact on arm64 as we share the reset driver on the VE platform. The obvious fix is to move arm64 to use the same infrastructure. Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com> [catalin.marinas@arm.com: removed reboot_mode = REBOOT_HARD default setting] Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Will Deacon 提交于
On arm64, cache maintenance faults appear as data aborts with the CM bit set in the ESR. The WnR bit, usually used to distinguish between faulting loads and stores, always reads as 1 and (slightly confusingly) the instructions are treated as reads by the architecture. This patch fixes our fault handling code to treat cache maintenance faults in the same way as loads. Signed-off-by: NWill Deacon <will.deacon@arm.com> Cc: <stable@vger.kernel.org> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Chen Gang 提交于
If 'COMPAT' not defined, aarch32_break_handler() cannot pass compiling, and it can work independent with 'COMPAT', so remove dummy definition. The related error: arch/arm64/kernel/debug-monitors.c:249:5: error: redefinition of ‘aarch32_break_handler’ In file included from arch/arm64/kernel/debug-monitors.c:29:0: /root/linux-next/arch/arm64/include/asm/debug-monitors.h:89:12: note: previous definition of ‘aarch32_break_handler’ was here Signed-off-by: NChen Gang <gang.chen@asianux.com> Acked-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Catalin Marinas 提交于
There is a slight chance that (timer) interrupts are triggered before a secondary CPU has been marked online with implications on softirq thread affinity. Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com> Reported-by: NKirill Tkhai <tkhai@yandex.ru>
-