Just verify the interface and track what functions are
supported.  Not actually used yet.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

v2: rebase updates
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

- rework the acpi execute code
- User proper parameters for ATPX functions

v2: rebase fixes
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Verify the ATPX interface and track what ATPX functions
are available for future use.

v2: rework due to tree changes
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The AMD ACPI interface may use ACPI_VIDEO_NOTIFY_PROBE to signal SBIOS
requests; block the keypress in this case since the user did not
actually press the mode switch key.
Signed-off-by: NLuca Tettamanti <kronos.it@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The standard video events may be overloaded for device specific
purposes. For example AMD ACPI interface overloads
ACPI_VIDEO_NOTIFY_PROBE (0x81) to signal AMD-specific events. In such
cases we don't want to send the keypress (KEY_SWITCHVIDEOMODE) to the
userspace because the user did not press the mode switch key (the
spurious keypress confuses the DE which usually changes the
display configuration and messes up a dual-screen setup).
This patch gives the handlers the chance to examine the event and
block the keypress if the event is device specific.
v2: refactor as suggested by Zhang Rui <rui.zhang@intel.com>
Signed-off-by: NLuca Tettamanti <kronos.it@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Move it out of the radeon_pm.c and into radeon_acpi.c since
we use it for more than just pm now.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Set up an handler for ACPI events and respond to brightness change
requests from the system BIOS.
v2: fix notification when using device-specific command codes
(tested by Pali Rohár <pali.rohar@gmail.com>); cache the encoder
controlling the backlight during the initialization to avoid searching
it every time (suggested by Alex Deucher).
v3: whitespace fixes (Alex Deucher).
Signed-off-by: NLuca Tettamanti <kronos.it@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Use GET_SYSTEM_PARAMS for retrieving the configuration for the system
BIOS notifications.
v2: packed struct (Lee, Chun-Yi <jlee@suse.com>)
v3: fix enable with device specific command code
Signed-off-by: NLuca Tettamanti <kronos.it@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Wrap the call to VERIFY_INTERFACE and add the parsing of the support
vectors.
v2: use a packed struct for handling the output of ACPI calls, hides
ugly pointer arithmetics (Lee, Chun-Yi <jlee@suse.com>).
v3: fix radeon_atif_parse_functions handling (Alex Deucher)
Signed-off-by: NLuca Tettamanti <kronos.it@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Don't hard-code function number, this will allow to reuse the function.
v2: add support for the 2nd parameter (from Lee, Chun-Yi
<jlee@suse.com>).
Signed-off-by: NLuca Tettamanti <kronos.it@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

On systems that use the build in GPU backlight controller,
we can use atom tables to change the brightness level.

v2: use firmware flags
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

To better enable sharing with atom backlight control.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

A table in the vbios tells us whether the GPU backlight controller
is used or not.  If the bit is set, the GPU backlight controller is
used; if it is not set, an off-chip backlight controller is used.

v2: store all the firmware flags, not just BL control
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add a new header that defines the AMD ACPI interface used
for laptops, PowerXpress, and chipset specific functionality
and update the current code to use it.

Todo:
- properly verify the ACPI interfaces
- hook up and handle ACPI notifications
- make PX code more robust
- implement PCIe Gen and width switching using ACPI

v2: fix typo in header
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This allows gcc to fold duplicate calls into a single call.  Since
the current users do actually call it multiple times with the
same arguments, this is an obvious win.
Signed-off-by: NSteven Fuerst <svfuerst@gmail.com>

We use __fls() to find the most significant bit.  Using that, the
loop can be avoided.  A second trick is to use the behaviour of the
rotate instructions to expand the range of the unsigned int to float
conversion to the full 32 bits in a branchless way.

The routine is now exact up to 2^24.  Above that, we truncate which
is equivalent to rounding towards zero.
Signed-off-by: NSteven Fuerst <svfuerst@gmail.com>

Remove the copy of i2f() in r600_blit_kms.c
We rename the function to something longer now that it is a global
symbol.  This reduces the likelyhood of unintended clashes later.

This might be a candidate for inclusion inside general drm infrastructure.
However, at the moment only the radeon driver uses it.
Signed-off-by: NSteven Fuerst <svfuerst@gmail.com>

It was only used for dynpm, but has been replaced with
a better implementation using fences.  Remove it.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

1. Drop gui idle stuff, it's not as reliable as fences and only
covers the 3D engine.
2. Wait for fences on all rings.  This makes sure all rings are
idle when reclocking.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

- Stop the displays from accessing the FB
- Block CPU access
- Turn off MC client access

This should fix issues some users have seen, especially
with UEFI, when changing the MC FB location that result
in hangs or display corruption.

v2: fix crtc enabled check noticed by Luca Tettamanti
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This might be called before we've allocated the radeon_crtcs

v2: fix typo in array size
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This might be called before we've allocated the radeon_crtcs
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Use the new offset array rather than open coding it.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This might be called before we've allocated the radeon_crtcs
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Cards typically have 5-7 scratch registers; one of these is reserved for
rdev->rptr_save_reg. Unfortunately the reservation is done in function
r100_cp_init, which is called by all drivers except r600 - and this
function is also invoked on resume from suspend. After several resumes,
no scratch registers are free and graphics acceleration is disabled.

Dmesg then reports either:
   *ERROR* radeon: cp failed to get scratch reg (-22).
   *ERROR* radeon: cp isn't working(-22).
   radeon 0000:01:00.0: failed initializing CP (-22).
or:
   *ERROR* radeon: failed to get scratch reg (-22).
   *ERROR* radeon: failed testing IB on GFX ring (-22).
   *ERROR* ib ring test failed (-22).

The chain of calls on boot for all except r600 is:
radeon_init -> ... -> (rXXX_init) -> rXXX_startup -> r100_cp_init

The chain of calls on resume for all except r600 is:
rXXX_resume -> rXXX_startup -> r100_cp_init.

R600 correctly allocates rptr_save_reg in r600_init (ie once only, not
in resume). However moving the code into the init functions for all
drivers means touching 4 drivers. So instead, this patch just adds a
test in r100_cp_init to avoid reallocating on resume. As the rdev
structure is allocated via kzalloc in radeon_driver_load_kms, and zero
is not a valid registerid, zero safely implies not-yet-allocated.

This issue appears to have been introduced in c7eff978 (3.6.0-rcN)
Signed-off-by: NSimon Kitching <skitching@vonos.net>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This reverts commit 985f61f7.

This commit fixed certain cases, but ended up regressing others
due to limitations in the current KMS API.  A proper fix is too
invasive for 3.6.  Push it back to 3.7.
Reported-by: NAndres Freund <andres@anarazel.de>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We noticed a plymouth bug on Fedora 18, and I then
noticed this stupid thinko, fixing it fixed the problem
with plymouth.

Cc: stable@vger.kernel.org
Acked-by: NBen Skeggs <bskeggs@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Alex writes:

This is the current set of radeon fixes for 3.6.  Two small fixes:
- fix the fence issues introduced in 3.5 with 64-bit fences
- PLL fix for multiple DP heads

* 'drm-fixes-3.6' of git://people.freedesktop.org/~agd5f/linux:
  drm/radeon: make 64bit fences more robust v3
  drm/radeon: rework pll selection (v3)

Only increase the higher 32bits if we really detect a wrap around.

v2: instead of increasing the higher 32bits just use the higher
    32bits from the last emitted fence.
v3: also use last emitted fence value as upper limit.

The intention of this patch is to make fences as robust as
they where before introducing 64bit fences. This is
necessary because on older systems it looks like the fence
value gets corrupted on initialization.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=51344

Should also fix:
https://bugs.freedesktop.org/show_bug.cgi?id=54129
https://bugs.freedesktop.org/show_bug.cgi?id=54662
https://bugzilla.redhat.com/show_bug.cgi?id=846505
https://bugzilla.redhat.com/show_bug.cgi?id=845639

3.5 needs a separate patch due to changes in the
fence code.  Will send that out separately.
Signed-off-by: NChristian König <deathsimple@vodafone.de>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

For DP we can use the same PPLL for all active DP
encoders.  Take advantage of that to prevent cases
where we may end up sharing a PPLL between DP and
non-DP which won't work.  Also clean up the code
a bit.

v2: - fix missing pll_id assignment in crtc init
v3: - fix DP PPLL check
    - document functions
    - break in main encoder search loop after matching.
      no need to keep checking additional encoders.

fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=54471Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Merge branch 'exynos-drm-fixes' of git://git.infradead.org/users/kmpark/linux-samsung into drm-fixes

Inki Dae writes:
- fix build warnings
- minor code cleanup
- remove non-standard format, DRM_FORMAT_NV12M
- add dummy mmap for exynos dmabuf
  . dma_buf export needs this patch

* 'exynos-drm-fixes' of git://git.infradead.org/users/kmpark/linux-samsung:
  drm: Drop the NV12M and YUV420M formats
  drm/exynos: remove DRM_FORMAT_NV12M from plane module
  drm/exynos: fix double call of drm_prime_(init/destroy)_file_private
  drm/exynos: add dummy support for dmabuf-mmap
  drm/exynos: Add missing braces around sizeof in exynos_mixer.c
  drm/exynos: Add missing braces around sizeof in exynos_hdmi.c
  drm/exynos: Make g2d_pm_ops static
  drm/exynos: Add dependency for G2D in Kconfig
  drm/exynos: fixed page align bug.
  drm/exynos: Use ERR_CAST inlined function instead of ERR_PTR(PTR_ERR(.. [1]
  drm/exynos: Use devm_* functions in exynos_drm_g2d.c file
  drm/exynos: Use devm_kzalloc in exynos_drm_hdmi.c file
  drm/exynos: Use devm_kzalloc in exynos_drm_vidi.c file
  drm/exynos: Remove redundant check in exynos_drm_fimd.c file
  drm/exynos: Remove redundant check in exynos_hdmi.c file

The NV12M/YUV420M formats are identical to the NV12/YUV420 formats.
So just remove these duplicated format names.

This might look like breaking the ABI, but the code has never actually
accepted these formats, so nothing can be using them.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>

this patch removes DRM_FORMAT_NV12M from plane module because this format
is same as DRM_FORMAT_NV12. DRM_FORMAT_NV12M will be identified by
mode_cmd->handles and mode_cmd->offsets fields internally.
Signed-off-by: NInki Dae <inki.dae@samsung.com>
Signed-off-by: NKyungmin.park <kyungmin.park@samsung.com>

The double invocations are incorrect but seem to be safe so I don't
think this will fix any bugs.

Before:

[    7.639366] drm_prime_init_file ee3675d0
[    7.639377] drm_prime_init_file ee3675d0
[    7.639507] drm_prime_destroy_file ee3675d0
[    7.639518] drm_prime_destroy_file ee3675d0
[    7.639802] drm_prime_init_file ee372390
[    7.639810] drm_prime_init_file ee372390
[    8.473316] drm_prime_init_file ee356390
[    8.473331] drm_prime_init_file ee356390

After:

[    6.363842] drm_prime_init_file edc2e5d0
[    6.363994] drm_prime_destroy_file edc2e5d0
[    6.364260] drm_prime_init_file edc2e750
[    8.004837] drm_prime_init_file ee36ded0
Signed-off-by: NMandeep Singh Baines <msb@chromium.org>
Acked-by: NSeung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>

This patch adds a stub function for DMABUF mmap.
This allows to export a DMABUF.
Signed-off-by: NTomasz Stanislawski <t.stanislaws@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Fixes the following checkpatch warnings:
WARNING: sizeof filter_y_horiz_tap8 should be sizeof(filter_y_horiz_tap8)
WARNING: sizeof filter_y_vert_tap4 should be sizeof(filter_y_vert_tap4)
WARNING: sizeof filter_cr_horiz_tap4 should be sizeof(filter_cr_horiz_tap4)
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NInki Dae <inki.dae@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>

Fixes the following checkpatch warnings:
WARNING: sizeof *res should be sizeof(*res)
WARNING: sizeof res->regul_bulk[0] should be sizeof(res->regul_bulk[0])
WARNING: sizeof *res should be sizeof(*res)
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NInki Dae <inki.dae@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>