There is a tricky interaction between the machine check handler
and the critical sections of load_fpu_regs and save_fpu_regs
functions. If the machine check interrupts one of the two
functions the critical section cleanup will complete the function
before the machine check handler s390_do_machine_check is called.
Trouble is that the machine check handler needs to validate the
floating point registers *before* and not *after* the completion
of load_fpu_regs/save_fpu_regs.

The simplest solution is to rewind the PSW to the start of the
load_fpu_regs/save_fpu_regs and retry the function after the
return from the machine check handler.
Tested-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Cc: <stable@vger.kernel.org> # 4.3+
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Add the missing lpp magic initialization for cpu 0. Without this all
samples on cpu 0 do not have the most significant bit set in the
program parameter field, which we use to distinguish between guest and
host samples if the pid is also 0.

We did initialize the lpp magic in the absolute zero lowcore but
forgot that when switching to the allocated lowcore on cpu 0 only.
Reported-by: NShu Juan Zhang <zhshuj@cn.ibm.com>
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Cc: stable@vger.kernel.org # v4.4+
Fixes: e22cf8ca ("s390/cpumf: rework program parameter setting to detect guest samples")
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Signed-off-by: NAdam Buchbinder <adam.buchbinder@gmail.com>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

The pgtable.c file is quite big, before it grows any larger split it
into pgtable.c, pgalloc.c and gmap.c. In addition move the gmap related
header definitions into the new gmap.h header and all of the pgste
helpers from pgtable.h to pgtable.c.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

The pmdp_xxx function are smaller than their ptep_xxx counterparts
but to keep things symmetrical unline them as well.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

The code in the various ptep_xxx functions has grown quite large,
consolidate them to four out-of-line functions:
  ptep_xchg_direct to exchange a pte with another with immediate flushing
  ptep_xchg_lazy to exchange a pte with another in a batched update
  ptep_modify_prot_start to begin a protection flags update
  ptep_modify_prot_commit to commit a protection flags update
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Provide a user space interface to issue call logical-processor instructions.
Only selected CLP commands are allowed, enough to get the full overview of
the installed PCI functions.
Reviewed-by: NSebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Convert the uses of pr_warning to pr_warn so there are fewer
uses of the old pr_warning.

Miscellanea:

o Align arguments
o Coalesce formats
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

git commit 26f15caa ("s390/cmpxchg: simplify cmpxchg_double")
removed support for cmpxchg_double for two consecutive four byte
values, for which it would generate a cds instruction.

However I forgot to remove the corresponding define in our percpu
header file, which means that this_cpu_cmpxchg_double would now
incorrectly generate a cdsg instruction if being used on a double four
byte location. Therefore remove the percpu define as well.

There is currently no user and therefore no bug fixed with
this. Obviously any such user could and should simply use cmpxchg.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

commit e22cf8ca ("s390/cpumf: rework program parameter setting
to detect guest samples") requires guest changes to get proper
guest/host. We can do better: We can use the primary asn value,
which is set on all Linux variants to compare this with the host
pp value.
We now have the following cases:
1. Guest using PP
host sample:  gpp == 0, asn == hpp --> host
guest sample: gpp != 0 --> guest
2. Guest not using PP
host sample:  gpp == 0, asn == hpp --> host
guest sample: gpp == 0, asn != hpp --> guest

As soon as the host no longer sets CR4, we must back out
this heuristics - let's add a comment in switch_to.
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: NHendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

We have two close to identical report_user_fault functions.
Add a parameter to one and get rid of the other one in order
to reduce code duplication.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

The double escape character sequence introduced with commit
272fa59c ("s390/dis: Fix handling of format specifiers") is not
necessary anymore since commit 561e1030 ("s390/dis: Fix printing
of the register numbers").

Instead this now generates an extra '%' character:

lg      %%r1,160(%%r11)

So fix this and basically revert 272fa59c.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Git commit ab3f285f
"KVM: s390/mm: try a cow on read only pages for key ops"
added a fixup_user_fault to set_guest_storage_key force a copy on
write if the page is mapped read-only. This is supposed to fix the
problem of differing storage keys for shared mappings, e.g. the
empty_zero_page.
But if the storage key is set before the pte is mapped the storage
key update is done on the pgste. A later fault will happily map the
shared page with the key from the pgste.

Eventually git commit 2faee8ff
"s390/mm: prevent and break zero page mappings in case of storage keys"
fixed this problem for the empty_zero_page. The commit makes sure that
guests enabled for storage keys will not use the empty_zero_page at all.

As the call to fixup_user_fault in set_guest_storage_key depends on the
order of the storage key operation vs. the fault that maps the pte
it does not really fix anything. Just remove it.
Reviewed-by: NDominik Dingel <dingel@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

The comment describing the bit encoding for segment table entries
is incorrect in regard to the read and write bits. The segment
read bit is 0x0002 and write is 0x0001, not the other way around.
Reported-by: NGerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

We have four different stack tracers of which three had bugs. So it's
time to merge them to a single stack tracer which allows to specify a
call back function which will be called for each step.

This patch changes behavior a bit:

- the "nosched" and "in_sched_functions" check within
  save_stack_trace_tsk did work only for the last stack frame within a
  context. Now it considers the check for each stack frame like it
  should.

- both the oprofile variant and the perf_events variant did save a
  return address twice if a zero back chain was detected, which
  indicates an interrupt frame. The new dump_trace function will call
  the oprofile and perf_events backends with the psw address that is
  contained within the corresponding pt_regs structure instead.

- the original show_trace and save_context_stack functions did already
  use the psw address of the pt_regs structure if a zero back chain
  was detected. However now we ignore the psw address if it is a user
  space address. After all we trace the kernel stack and not the user
  space stack. This way we also get rid of the garbage user space
  address in case of warnings and / or panic call traces.

So this should make life easier since now there is only one stack
tracer left which we can break.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

The first parameter of pgste_update_all is a pointer to a pte.
Simplify the code by passing the pte value.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Implement current_stack_pointer() helper function and use it
everywhere, instead of having several different inline assembly
variants.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Tested-by: NPeter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Use the inversed "nosched" logic like all other architectures.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Tested-by: NPeter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

The change of the access rights for an address range in the kernel
address space is currently done with a loop of IPTE + a store of the
modified PTE. Between the IPTE and the store the PTE will be invalid,
this intermediate state can cause problems with concurrent accesses.

Consider a change of a kernel area from read-write to read-only, a
concurrent reader of that area should be fine but with the invalid
PTE it might get an unexpected exception.

Remove the IPTEs for each PTE and do a global flush after all PTEs
have been modified.
Reviewed-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

For each PCI function we need to maintain arch specific data in
struct zpci_dev which also contains a pointer to struct pci_dev.

When a function is registered or deregistered (which is triggered by PCI
common code) we need to adjust that pointer which could interfere with
the machine check handler (triggered by FW) using zpci_dev->pdev.

Since multiple instances of the same pdev could exist at a time this can't
be solved with locking.

Fix that by ditching the pdev pointer and use a bus walk to reach
struct pci_dev (only one instance of a pdev can be registered at the bus
at a time).
Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: NGerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

git commit 904818e2
"s390/kernel: introduce fpu-internal.h with fpu helper functions"
introduced the fpregs_store / fp_regs_load helper. These function
fail to save and restore the floating pointer control registers.

The effect is that the FPC is not correctly handled on signal
delivery and signal return.

Cc: stable@vger.kernel.org # 4.4
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

git commit 80703617
"s390: add support for vector extension"
broke 31-bit compat processes in regard to signal handling.

The restore_sigregs_ext32() function is used to restore the additional
elements from the user space signal frame. Among the additional elements
are the upper registers halves for 64-bit register support for 31-bit
processes. The copy_from_user that is used to retrieve the high-gprs
array from the user stack uses an incorrect length, 8 bytes instead of
64 bytes. This causes incorrect upper register halves to get loaded.

Cc: stable@vger.kernel.org # 3.8+
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Although we don't expect to take alignment faults on access to normal
memory, misbehaving (i.e. buggy) user code can pass MMIO pointers into
system calls, leading to things like get_user accessing device memory.

Rather than OOPS the kernel, allow any exception fixups to run and
return something like -EFAULT back to userspace. This makes the
behaviour more consistent with userspace, even though applications with
access to device mappings can easily cause other issues if they try
hard enough.
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NEun Taik Lee <eun.taik.lee@samsung.com>
[will: dropped __kprobes annotation and rewrote commit mesage]
Signed-off-by: NWill Deacon <will.deacon@arm.com>

For the same reason as commit 19514fc6 ("arm, kbuild: make "make
install" not depend on vmlinux"), the install targets should never
trigger the rebuild of the kernel.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

Commit 3565fce3 ("mm, x86: get_user_pages() for dax mappings") has
moved up the pte_page(pte) in x86's fast gup_pte_range(), for no
discernible reason: put it back where it belongs, after the pte_flags
check and the pfn_valid cross-check.

That may be the cause of the NULL pointer dereference in
gup_pte_range(), seen when vfio called vaddr_get_pfn() when starting a
qemu-kvm based VM.
Signed-off-by: NHugh Dickins <hughd@google.com>
Reported-by: NMichael Long <Harn-Solo@gmx.de>
Tested-by: NMichael Long <Harn-Solo@gmx.de>
Acked-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

A kernel page fault oops with the callstack below was observed
when a read syscall was made to a pmem device after a huge amount
(>512GB) of vmalloc ranges was allocated by ioremap() on a x86_64
system:

     BUG: unable to handle kernel paging request at ffff880840000ff8
     IP: vmalloc_fault+0x1be/0x300
     PGD c7f03a067 PUD 0
     Oops: 0000 [#1] SM
     Call Trace:
        __do_page_fault+0x285/0x3e0
        do_page_fault+0x2f/0x80
        ? put_prev_entity+0x35/0x7a0
        page_fault+0x28/0x30
        ? memcpy_erms+0x6/0x10
        ? schedule+0x35/0x80
        ? pmem_rw_bytes+0x6a/0x190 [nd_pmem]
        ? schedule_timeout+0x183/0x240
        btt_log_read+0x63/0x140 [nd_btt]
         :
        ? __symbol_put+0x60/0x60
        ? kernel_read+0x50/0x80
        SyS_finit_module+0xb9/0xf0
        entry_SYSCALL_64_fastpath+0x1a/0xa4

Since v4.1, ioremap() supports large page (pud/pmd) mappings in
x86_64 and PAE.  vmalloc_fault() however assumes that the vmalloc
range is limited to pte mappings.

vmalloc faults do not normally happen in ioremap'd ranges since
ioremap() sets up the kernel page tables, which are shared by
user processes.  pgd_ctor() sets the kernel's PGD entries to
user's during fork().  When allocation of the vmalloc ranges
crosses a 512GB boundary, ioremap() allocates a new pud table
and updates the kernel PGD entry to point it.  If user process's
PGD entry does not have this update yet, a read/write syscall
to the range will cause a vmalloc fault, which hits the Oops
above as it does not handle a large page properly.

Following changes are made to vmalloc_fault().

64-bit:

 - No change for the PGD sync operation as it handles large
   pages already.
 - Add pud_huge() and pmd_huge() to the validation code to
   handle large pages.
 - Change pud_page_vaddr() to pud_pfn() since an ioremap range
   is not directly mapped (while the if-statement still works
   with a bogus addr).
 - Change pmd_page() to pmd_pfn() since an ioremap range is not
   backed by struct page (while the if-statement still works
   with a bogus addr).

32-bit:
 - No change for the sync operation since the index3 PGD entry
   covers the entire vmalloc range, which is always valid.
   (A separate change to sync PGD entry is necessary if this
    memory layout is changed regardless of the page size.)
 - Add pmd_huge() to the validation code to handle large pages.
   This is for completeness since vmalloc_fault() won't happen
   in ioremap'd ranges as its PGD entry is always valid.
Reported-by: NHenning Schild <henning.schild@siemens.com>
Signed-off-by: NToshi Kani <toshi.kani@hpe.com>
Acked-by: NBorislav Petkov <bp@alien8.de>
Cc: <stable@vger.kernel.org> # 4.1+
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Toshi Kani <toshi.kani@hp.com>
Cc: linux-mm@kvack.org
Cc: linux-nvdimm@lists.01.org
Link: http://lkml.kernel.org/r/1455758214-24623-1-git-send-email-toshi.kani@hpe.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Quite often drivers set only "write" permission assuming that this
includes "read" permission as well and this works on plenty of
platforms. However IODA2 is strict about this and produces an EEH when
"read" permission is not set and reading happens.

This adds a workaround in the IODA code to always add the "read" bit
when the "write" bit is set.

Fixes: 10b35b2b ("powerpc/powernv: Do not set "read" flag if direction==DMA_NONE")
Cc: stable@vger.kernel.org # 4.2+
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Tested-by: NDouglas Miller <dougmill@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This patch ensures that devices, which got registered before arch_initcall
will be handled correctly by IOMMU-based DMA-mapping code.

Cc: <stable@vger.kernel.org>
Fixes: 13b8629f ("arm64: Add IOMMU dma_ops")
Acked-by: NRobin Murphy <robin.murphy@arm.com>
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

Looks like the HPET spec at intel.com got moved.
It isn't hard to find so drop the link, just mention
the revision assumed.
Suggested-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Clemens Ladisch <clemens@ladisch.de>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-doc@vger.kernel.org
Link: http://lkml.kernel.org/r/1455145462-3877-1-git-send-email-mst@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Data corruption issues were observed in tests which initiated
a system crash/reset while accessing BTT devices.  This problem
is reproducible.

The BTT driver calls pmem_rw_bytes() to update data in pmem
devices.  This interface calls __copy_user_nocache(), which
uses non-temporal stores so that the stores to pmem are
persistent.

__copy_user_nocache() uses non-temporal stores when a request
size is 8 bytes or larger (and is aligned by 8 bytes).  The
BTT driver updates the BTT map table, which entry size is
4 bytes.  Therefore, updates to the map table entries remain
cached, and are not written to pmem after a crash.

Change __copy_user_nocache() to use non-temporal store when
a request size is 4 bytes.  The change extends the current
byte-copy path for a less-than-8-bytes request, and does not
add any overhead to the regular path.
Reported-and-tested-by: NMicah Parrish <micah.parrish@hpe.com>
Reported-and-tested-by: NBrian Boylston <brian.boylston@hpe.com>
Signed-off-by: NToshi Kani <toshi.kani@hpe.com>
Cc: <stable@vger.kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Toshi Kani <toshi.kani@hp.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: linux-nvdimm@lists.01.org
Link: http://lkml.kernel.org/r/1455225857-12039-3-git-send-email-toshi.kani@hpe.com
[ Small readability edits. ]
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Add comments to __copy_user_nocache() to clarify its procedures
and alignment requirements.

Also change numeric branch target labels to named local labels.

No code changed:

 arch/x86/lib/copy_user_64.o:

    text    data     bss     dec     hex filename
    1239       0       0    1239     4d7 copy_user_64.o.before
    1239       0       0    1239     4d7 copy_user_64.o.after

 md5:
    58bed94c2db98c1ca9a2d46d0680aaae  copy_user_64.o.before.asm
    58bed94c2db98c1ca9a2d46d0680aaae  copy_user_64.o.after.asm
Signed-off-by: NToshi Kani <toshi.kani@hpe.com>
Cc: <stable@vger.kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Toshi Kani <toshi.kani@hp.com>
Cc: brian.boylston@hpe.com
Cc: dan.j.williams@intel.com
Cc: linux-nvdimm@lists.01.org
Cc: micah.parrish@hpe.com
Cc: ross.zwisler@linux.intel.com
Cc: vishal.l.verma@intel.com
Link: http://lkml.kernel.org/r/1455225857-12039-2-git-send-email-toshi.kani@hpe.com
[ Small readability edits and added object file comparison. ]
Signed-off-by: NIngo Molnar <mingo@kernel.org>

When fixing the DAT off bug ("s390: fix DAT off memory access, e.g.
on kdump") both Christian and I missed that we can save an additional
stnsm instruction.

This saves us a couple of cycles which could improve the speed of
memcpy_real.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

In the error path of amd_uncore_cpu_up_prepare() the newly allocated uncore
struct is freed, but the percpu pointer still references it. Set it to NULL.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1602162302170.19512@nanosSigned-off-by: NIngo Molnar <mingo@kernel.org>

Changes introduced in the upstream version of libfdt pulled in by commit
91feabc2 ("scripts/dtc: Update to upstream commit b06e55c88b9b") use
the strnlen() function, which isn't currently available to the EFI name-
space. Add it to the EFI namespace to avoid a linker error.

Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Rob Herring <robh@kernel.org>
Reviewed-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

ECB modes don't use an initialization vector. The kernel
/proc/crypto interface doesn't reflect this properly.
Acked-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NJeremy Linton <jeremy.linton@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>