Bitrot has set in for this driver and the sh-vou clock was never enabled,
since the clock name in clock-sh7724.c was wrong. It should be sh-vou, not
sh-vou.0.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Thanks-to: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Magnus Damm <damm@opensource.se>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Make sure that there are valid values in the crop rectangle to ensure
that the color plane doesn't get shifted when cropping.
Since there is no distinction between 12bit and 16bit YUV formats in
at the subdev level, use the more restrictive 12bit limits for all YUV
formats.
Signed-off-by: NDamian Hobson-Garcia <dhobsong@igel.co.jp>
Signed-off-by: NYoshihiro Kaneko <ykaneko0929@gmail.com>
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

When stopping the pipeline the driver waits for the pipeline state to be
set to VSP1_PIPELINE_STOPPED but fails to lock the pipe irqlock to read
the state variable protected by the lock. Fix it.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Fix Suspend-to-RAM so that VSP1 driver continues to work after resuming.

In detail,
  - Fix the judgment of ref count in resuming.
  - Add stopping VSP1 during suspend.

[Refactor the suspend and resume code to lower suspend delay]
Signed-off-by: NSei Fumizono <sei.fumizono.jw@hitachi-solutions.com>
Signed-off-by: NYoshifumi Hosoya <yoshifumi.hosoya.wj@renesas.com>
Signed-off-by: NYoshihiro Kaneko <ykaneko0929@gmail.com>
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

FXA bit of VI6_DPR_mod_ROUTE register starts from 16bit. But VI6_DPR_ROUTE_FXA_MASK
is set to become start from 8bit. This fixes shift size for VI6_DPR_ROUTE_FXA_MASK.
Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

FP bit of VI6_DPR_mod_ROUTE register is 6bit. But VI6_DPR_ROUTE_FP_MASK is set
to 0xFF, this will mask until the reserve bit.
This fixes size for VI6_DPR_ROUTE_FP_MASK.
Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Clipping size bit of VI6_WPFn _HSZCLIP and VI6_WPFn _VSZCLIP register are from
0 bit to 11 bit. But VI6_WPF_SZCLIP_SIZE_MASK is set to 0x1FFF, this will mask
until the reserve bits. This fixes size for VI6_WPF_SZCLIP_SIZE_MASK.
Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

API compliance scanning with coccinelle flagged:
./drivers/media/usb/gspca/m5602/m5602_s5k83a.c:180:9-25:
	 WARNING: timeout (100) seems HZ dependent

Numeric constants passed to schedule_timeout() make the effective
timeout HZ dependent which makes little sense in a polling loop for
the cameras rotation state.
Fixed up by converting the constant to jiffies with msecs_to_jiffies()
Signed-off-by: NNicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

We already know status is negative because of the earlier check so there
is no need to check again.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

They are no longer used in old non-control-framework
bridge drivers.
Reported-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NRicardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

They are no longer used in old non-control-framework
bridge drivers.
Reported-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NRicardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

They are no longer used in old non-control-framework
bridge drivers.
Reported-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NRicardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

They are no longer used in old non-control-framework
bridge drivers.
Reported-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NRicardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

They are no longer used in old non-control-framework
bridge drivers.
Reported-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NRicardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

They are no longer used in old non-control-framework
bridge drivers.
Reported-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NRicardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

They are no longer used in old non-control-framework
bridge drivers.
Reported-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NRicardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

They are no longer used in old non-control-framework
bridge drivers.
Reported-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NRicardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

They are no longer used in old non-control-framework
bridge drivers.
Reported-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NRicardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

They are no longer used in old non-control-framework
bridge drivers.
Reported-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NRicardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

They are no longer used in old non-control-framework
bridge drivers.
Reported-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NRicardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

In many cases, refresh rate is not exact integer. In such cases,
fraction was lost and it used to print, say, 59 in case of 59.94.
Now, capturing the fraction up to 2 decimal places.
Signed-off-by: NPrashant Laddha <prladdha@cisco.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

We can simplify the code removing the if().

v4l2_ctr_new sets ctrls->elems to 1 when !ctrl->is_ptr.
Signed-off-by: NRicardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The master clock should be handled by sensor itself.
Signed-off-by: NJosh Wu <josh.wu@atmel.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The runtime pm resume/suspend will enable/disable pclk (ISI peripheral
clock).

We have to call runtime_pm_get_sync()/runtime_pm_put() when we need to
access ISI registers. In atmel_isi_probe(), remove the isi disable code
as at that moment ISI peripheral clock is not enable yet.

Besides, clock_start()/clock_stop() is used to control the mclk, not
the ISI peripheral clock. So move this to start[stop]_streaming()
function.
Signed-off-by: NJosh Wu <josh.wu@atmel.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

In current code, stop_streaming() will just return if ISI is still
working in the codec. But this is incorrect, we need to disable ISI even
it is working on the codec, otherwise stop_streaming() will not work as
we expected.
Signed-off-by: NJosh Wu <josh.wu@atmel.com>
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Cropping should be configured on the pipeline subdev nodes, not through
the video nodes. Remove crop support on all video nodes.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Now that the driver doesn't use the non-exported omap4_ctrl_pad_readl
and omap4_ctrl_pad_writel functions nothing prevents it from being
compiled as a module anymore.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Commit 813f5c0a ("media: Change media device link_notify behaviour")
modified the media controller link setup notification API and updated the
OMAP3 ISP driver accordingly. As a side effect it introduced a bug by
turning power on after setting the link instead of before. This results in
sub-devices not being powered down in some cases when they should be. Fix
it.

Fixes: 813f5c0a [media] media: Change media device link_notify behaviour
Signed-off-by: NSakari Ailus <sakari.ailus@iki.fi>
Cc: stable@vger.kernel.org # since v3.10
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The async notifier was registered before the v4l2_device was registered and
before the notifier callbacks were set. This could lead to missing the
bound() and complete() callbacks and to attempting to spin_lock() and
uninitialised spin lock.

Also fix unregistering the async notifier in the case of an error --- the
function may not fail anymore after the notifier is registered.

Fixes: da7f3843 ("[media] omap3isp: Add support for the Device Tree")
Signed-off-by: NSakari Ailus <sakari.ailus@iki.fi>
Reviewed-by: NSebastian Reichel <sre@kernel.org>
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Don't use the kernel types in uapi headers.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The last CVT standard introduced reduced blanking version 2 which is signaled by
a vsync of 8. Log this.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Added support for reduced blanking version 2 (RB v2) in cvt timings.
Standard specifies a fixed vsync pulse of 8 lines to indicate RB v2
timings. Vertical back porch is fixed at 6 lines and vertical front
porch is remainder of vertical blanking time.

For RB v2, horizontal blanking is fixed at 80 pixels. Horizontal sync
is fixed at 32. All horizontal timing counts (active pixels, front,
back porches) can be specified upto a precision of 1.

RB v2 allows for non standard aspect ratios. In RB v2 vsync does not
indicate aspect ratio. In absence of aspect ratio v4l2_detect_cvt()
cannot calculate image width from image height. Hence extending the
v4l2_detect_cvt() to pass image width in case of RB v2.
Signed-off-by: NPrashant Laddha <prladdha@cisco.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Use kernel.h macro definition.

Thanks to Julia Lawall for Coccinelle scripting support.
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Use kernel.h macro definition.

Thanks to Julia Lawall for Coccinelle scripting support.
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Use kernel.h macro definition.

Thanks to Julia Lawall for Coccinelle scripting support.
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Use kernel.h macro definition.

Thanks to Julia Lawall for Coccinelle scripting support.
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Use kernel.h macro definition.

Thanks to Julia Lawall for Coccinelle scripting support.
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The RC_ST and IR_SUNXI entries have weird indentation, and the RC_ST
entry is actually malformed. Fix it.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

This patch fixes region selection for lower bottom_frequency in BCM2048 FM
receiver. It also removes "Japan wide band" region since this is impossible
to do just like that.
Signed-off-by: NJan Roemisch <maxx@spaceboyz.net>
Acked-by: NPali Rohár <pali.rohar@gmail.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

solo_dev and pdev cannot be NULL here. It doesn't matter if we
initialized the PCI device or not.
Signed-off-by: NKrzysztof Ha?asa <khalasa@piap.pl>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>