X-Patchwork-Delegate: mchehab@redhat.com
Replace the custom I2C read/write implementation with SMBUS functions to
simplify the driver.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

X-Patchwork-Delegate: mchehab@redhat.com
The driver mistakenly prints the ROM version instead of the device ID to
the kernel log when detecting the chip. Fix it.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

X-Patchwork-Delegate: mchehab@redhat.com
Remove the CONFIG_ prefix from two Kconfig symbols in a dependency for
SMS_SIANO_DEBUGFS. This prefix is invalid inside Kconfig files.

Note that the current (common sense) dependency on SMS_USB_DRV and
SMS_SDIO_DRV being equal ensures that SMS_SIANO_DEBUGFS will not
violate its constraints. These constraint are that:
- it should only be built if SMS_USB_DRV is set;
- it can't be builtin if USB support is modular.

So drop the dependency on SMS_USB_DRV, as it is unneeded.

Fixes: 6c84b214 ("[media] sms: fix randconfig building error")
Reported-by: NMartin Walch <walch.martin@web.de>
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Geniatech T220 init fixed - reset cmd from windows driver and fixed TS bus config for cxd2820r.
Signed-off-by: NEvgeny Plehov <EvgenyPlehov@ukr.net>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

TS clock inversion in config.
Signed-off-by: NEvgeny Plehov <EvgenyPlehov@ukr.net>
Reviewed-by: NAntti Palosaari <crope@iki.fi>
Acked-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

* .: (268 commits)
  Linux 3.16-rc6
  um: segv: Save regs only in case of a kernel mode fault
  um: Fix hung task in fix_range_common()
  um: Ensure that a stub page cannot get unmapped
  Revert "um: Fix wait_stub_done() error handling"
  btrfs: test for valid bdev before kobj removal in btrfs_rm_device
  Btrfs: fix abnormal long waiting in fsync
  random: check for increase of entropy_count because of signed conversion
  ARM: EXYNOS: Fix core ID used by platsmp and hotplug code
  ahci: add support for the Promise FastTrak TX8660 SATA HBA (ahci mode)
  ARM: at91/dt: add missing clocks property to pwm node in sam9x5.dtsi
  ARM: at91/dt: fix usb0 clocks definition in sam9n12 dtsi
  ARM: at91: at91sam9x5: correct typo error for ohci clock
  irqchip: gic: Fix core ID calculation when topology is read from DT
  GFS2: fs/gfs2/rgrp.c: kernel-doc warning fixes
  GFS2: memcontrol: Spelling s/invlidate/invalidate/
  GFS2: Allow caching of glocks for flock
  GFS2: Allow flocks to use normal glock dq rather than dq_wait
  GFS2: replace count*size kzalloc by kcalloc
  GFS2: Use GFP_NOFS when allocating glocks
  ...

Conflicts:
	drivers/media/dvb-frontends/si2168.c
	drivers/media/dvb-frontends/si2168_priv.h
	drivers/media/tuners/si2157.c

As reported by Kbuildtest:

   drivers/media/v4l2-core/v4l2-subdev.c: In function 'check_format':
   drivers/media/v4l2-core/v4l2-subdev.c:136:23: error: 'struct v4l2_subdev' has no member named 'entity'
     if (format->pad >= sd->entity.num_pads)
                          ^
   drivers/media/v4l2-core/v4l2-subdev.c: In function 'check_crop':
   drivers/media/v4l2-core/v4l2-subdev.c:148:21: error: 'struct v4l2_subdev' has no member named 'entity'
     if (crop->pad >= sd->entity.num_pads)
                        ^
   drivers/media/v4l2-core/v4l2-subdev.c: In function 'check_selection':
   drivers/media/v4l2-core/v4l2-subdev.c:161:20: error: 'struct v4l2_subdev' has no member named 'entity'
     if (sel->pad >= sd->entity.num_pads)
                       ^
   drivers/media/v4l2-core/v4l2-subdev.c: In function 'check_edid':
   drivers/media/v4l2-core/v4l2-subdev.c:169:21: error: 'struct v4l2_subdev' has no member named 'entity'
     if (edid->pad >= sd->entity.num_pads)
                        ^
   drivers/media/v4l2-core/v4l2-subdev.c: In function 'subdev_do_ioctl':
>> drivers/media/v4l2-core/v4l2-subdev.c:186:6: warning: unused variable 'rval' [-Wunused-variable]
     int rval;
         ^
   drivers/media/v4l2-core/v4l2-subdev.c: At top level:
   drivers/media/v4l2-core/v4l2-subdev.c:129:12: warning: 'check_format' defined but not used [-Wunused-function]
    static int check_format(struct v4l2_subdev *sd,
               ^
   drivers/media/v4l2-core/v4l2-subdev.c:142:12: warning: 'check_crop' defined but not used [-Wunused-function]
    static int check_crop(struct v4l2_subdev *sd, struct v4l2_subdev_crop *crop)
               ^
   drivers/media/v4l2-core/v4l2-subdev.c:154:12: warning: 'check_selection' defined but not used [-Wunused-function]
    static int check_selection(struct v4l2_subdev *sd,
               ^
   drivers/media/v4l2-core/v4l2-subdev.c:167:12: warning: 'check_edid' defined but not used [-Wunused-function]
    static int check_edid(struct v4l2_subdev *sd, struct v4l2_subdev_edid *edid)

The above warnins happen because those functions are used only
when the V4L2 subdev API is enabled.
Reported-by: Nkbuild test robot <fengguang.wu@intel.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

MEDIA_SDR_SUPPORT and I2C_MUX are needed for rtl2832_sdr.
Reported-by: Nkbuild test robot <fengguang.wu@intel.com>
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Commit 0ba2aeb6
(v4l2-ctrls: increase internal min/max/step/def to 64 bit)
changes v4l2 controls to 64-bit. Driver it not working on 32-bit
arch as it uses directly control 'step' which is changed to 64-bit.
Reported-by: Nkbuild test robot <fengguang.wu@intel.com>
Cc: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

drivers/built-in.o: In function `isp_video_open':
/src/linux/drivers/media/platform/omap3isp/ispvideo.c:1253: undefined reference to `vb2_dma_contig_memops'
drivers/built-in.o: In function `omap3isp_video_init':
/src/linux/drivers/media/platform/omap3isp/ispvideo.c:1344: undefined reference to `vb2_dma_contig_init_ctx'
/src/linux/drivers/media/platform/omap3isp/ispvideo.c:1350: undefined reference to `vb2_dma_contig_cleanup_ctx'
drivers/built-in.o: In function `omap3isp_video_cleanup':
/src/linux/drivers/media/platform/omap3isp/ispvideo.c:1381: undefined reference to `vb2_dma_contig_cleanup_ctx'
make: *** [vmlinux] Error 1
Signed-off-by: NPeter Meerwald <pmeerw@pmeerw.net>
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

After the zeroing the whole struct struct media_entity_desc u_ent,
it is no longer necessary to memset(0) its u_ent.name field.

CC: stable@vger.kernel.org
Signed-off-by: NSalva Peiró <speiro@ai2.upv.es>
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Separate validation of different argument types. There's no reason to do
this separately for every IOCTL.
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

The bridge driver doesn't support interlaced formats, always return the
field order set to V4L2_FIELD_NONE.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

The SMIA++ sensors are progressive, always return the field order set to
V4L2_FIELD_NONE.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

The sensor is progressive, always return the field order set to
V4L2_FIELD_NONE.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

The sensor is progressive, always return the field order set to
V4L2_FIELD_NONE.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

The sensor is progressive, always return the field order set to
V4L2_FIELD_NONE.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

The sensor is progressive, always return the field order set to
V4L2_FIELD_NONE.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

The RSZ_LPF_INT_MASK define is cut and pasted twice so we can remove the
second instance.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

this patch fixes following sparse warning,
dm365_resizer.c:223:1: warning: symbol 'resizer_calculate_resize_ratios' was not declared. Should it be static?
dm365_resizer.c:313:5: warning: symbol 'resizer_configure_output_win' was not declared. Should it be static?
Signed-off-by: NLad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

This patch fixes following checkpatch warning,
media/davinci_vpfe/dm365_ipipe.c:1271: WARNING: Missing a blank line after declarations
media/davinci_vpfe/dm365_ipipe.c:1313: WARNING: Missing a blank line after declarations
Signed-off-by: NLad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

This switches all register accesses to use regmap. It allows to
use the regmap cache, tracing, and debug register dump facilities,
and removes the need to open code read-modify-writes.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Add support for registering the sensor subdevice using the v4l2-async API.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

as are mt9v024 and mt9v034. With minimal changes it is possible
to support mt9v02[24] with the same driver.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

The read mode register bits 8 and 9 are set and marked as reserved.
Don't clear them.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Since (min_row_time - crop->width) can be negative, we have to do a signed
comparison here. Otherwise max_t casts the negative value to unsigned int
and sets min_hblank to that invalid value.

Cc: stable@vger.kernel.org
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

This patch fixes following array out of bound warnings,

drivers/media/platform/davinci/vpif_display.c: In function 'vpif_remove':
drivers/media/platform/davinci/vpif_display.c:1389:36: warning: iteration
1u invokes undefined behavior [-Waggressive-loop-optimizations]
   vb2_dma_contig_cleanup_ctx(common->alloc_ctx);
                                    ^
drivers/media/platform/davinci/vpif_display.c:1385:2: note: containing loop
  for (i = 0; i < VPIF_DISPLAY_MAX_DEVICES; i++) {
  ^
drivers/media/platform/davinci/vpif_capture.c: In function 'vpif_remove':
drivers/media/platform/davinci/vpif_capture.c:1581:36: warning: iteration
1u invokes undefined behavior [-Waggressive-loop-optimizations]
   vb2_dma_contig_cleanup_ctx(common->alloc_ctx);
                                    ^
drivers/media/platform/davinci/vpif_capture.c:1577:2: note: containing loop
  for (i = 0; i < VPIF_CAPTURE_MAX_DEVICES; i++) {
  ^
drivers/media/platform/davinci/vpif_capture.c:1580:23: warning: array subscript
is above array bounds [-Warray-bounds]
   common = &ch->common[i];
Reported-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NLad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Regression fix:

V4L2_PIX_FMT_PRIV_MAGIC should only be set for the VIDEO_CAPTURE and
VIDEO_OUTPUT buffer types, and not for any others. In the case of
the win format this overwrote a pointer value that is passed in from
userspace.

Just set it for V4L2_BUF_TYPE_VIDEO_CAPTURE and OUTPUT only. Set
it before the callback is called, just as is done for try/s_fmt, and
again afterwards in case the driver zeroed it. The latter was missing
in try/s_fmt, so add it there as well. Currently it is quite likely
that drivers clear priv (that was needed for a long time), so it makes
sense to set it twice.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

V4L2_CAP_EXT_PIX_FORMAT is set for capabilities, but it needs to be set for
device_caps as well: device_caps should report all caps relevant to the
device node, and this is one of them.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

V4L2_CID_BASE_LASTP1 should be V4L2_CID_LASTP1. This has probably been wrong
since the earliest days of this documentation until I did a copy-and-paste
and found out that V4L2_CID_BASE_LASTP1 doesn't actually exist :-)
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

If you have a maximum that is at the limit of what the type supports,
and the step is > 1, then you can get wrap-around errors since the
code assumes that the maximum that the type supports is
ctrl->maximum + ctrl->step / 2.

In practice this is always fine, but in artificially crafted ranges
you will hit this bug. Since this is core code it should just work.

This bug has always been there but since it doesn't cause problems in
practice it was never noticed.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Add defines for the start line numbers of each field for both
525 and 625 line formats.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

While working with raw and sliced VBI support in several applications
I noticed that you really need to know the start linenumbers for
each video field in order to correctly convert the start line numbers
reported by v4l2_vbi_format to the line numbers used in v4l2_sliced_vbi_format.

This patch adds four defines that specify the start lines for each
field for both 525 and 625 line standards.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Added a blank line after variable declarations where checkpatch
requested that, and removed the 'write to the FSF' paragraph,
again as requested.

This is in preparation of the move out of staging into drivers/media.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

This prepares the driver for moving out of staging.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

The fact that the pixelformat is using a packed RGB format has nothing
to do with the colorspace that is being used. Those are very different
things. The colorspace decides what color a triplet of RGB numbers
actually map to. E.g. a red color with values (255, 0, 0) is a different
type of red depending on the colorspace. If the original pixelformat was
e.g. YUV in colorspace REC709, then after the conversion to RGB the
colorspace is still REC709. Unless the hardware actually converted the
colorspace as well from REC709 to sRGB, but that rarely if ever happens.

Remove this incorrect comment.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

The original report from Nikhil was that if data_offset > 0 and bytesused == 0,
then the check in __verify_length() would fail, even though the spec says that
if bytes_used == 0, then it will be replaced by the actual length of the
buffer.

After digging into it a bit more I realized that there were several other
things wrong:

- in __verify_length() it would use the application-provided length value
  for USERPTR and the vb2 core length for other memory models, but it
  should have used the application-provided length as well for DMABUF.

- in __fill_vb2_buffer() on the other hand it would replace bytesused == 0
  by the application-provided length, even for MMAP buffers where the
  length is determined by the vb2 core.

- in __fill_vb2_buffer() it tries to figure out if all the planes have
  bytesused == 0 before it will decide to replace bytesused by length.
  However, the spec makes no such provision, and it makes for convoluted
  code. So just replace any bytesused == 0 by the proper length.
  The idea behind this was that you could use bytesused to signal empty
  planes, something that is currently not supported. But that is better
  done in the future by using one of the reserved fields in strucy v4l2_plane.

This patch fixes all these issues.

Regards,

	Hans
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Reported-by: NNikhil Devshatwar <nikhil.nd@ti.com>
Cc: Nikhil Devshatwar <nikhil.nd@ti.com>
Acked-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Fill FMT buffer size field in order to inform app which will be
used streaming buffer size. Currently driver doesn't allow buffer
size value proposed by application.

Cc: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

SDR API is very new and surprises may occur. Due to that print
notice to remind possible users.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Enable two native formats, V4L2_SDR_FMT_CS8 and V4L2_SDR_FMT_CS14LE.
Move emulated formats behind module parameter.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>