* 'urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/writeback:
  squeeze max-pause area and drop pass-good area

* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/cpupowerutils:
  cpupower: use man(1) when calling "cpupower help subcommand"
  cpupower: make NLS truly optional
  cpupower: fix Makefile typo
  cpupower: Make monitor command -c/--cpu aware
  cpupower: Better detect offlined CPUs
  cpupower: Do not show an empty Idle_Stats monitor if no idle driver is available
  cpupower: mperf monitor - Use TSC to calculate max frequency if possible
  cpupower: avoid using symlinks

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging:
  hwmon: (i5k_amb) Drop i5k_channel_pci_id
  hwmon: (ntc_thermistor) Simplify if sequence

* '3.1-rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (21 commits)
  target: Convert acl_node_lock to be IRQ-disabling
  target: Make locking in transport_deregister_session() IRQ safe
  tcm_fc: init/exit functions should not be protected by "#ifdef MODULE"
  target: Print subpage too for unhandled MODE SENSE pages
  iscsi-target: Fix iscsit_allocate_se_cmd_for_tmr failure path bugs
  iscsi-target: Implement iSCSI target IPv6 address printing.
  target: Fix task SGL chaining breakage with transport_allocate_data_tasks
  target: Fix task count > 1 handling breakage and use max_sector page alignment
  target: Add missing DATA_SG_IO transport_cmd_get_valid_sectors check
  target: Fix SYNCHRONIZE_CACHE zero LBA + range breakage
  target: Remove duplicate task completions in transport_emulate_control_cdb
  target: Fix WRITE_SAME usage with transport_get_size
  target: Add WRITE_SAME (10) parsing and refactor passthrough checks
  target: Fix write payload exception handling with ->new_cmd_map
  iscsi-target: forever loop bug in iscsit_attach_ooo_cmdsn()
  iscsi-target: remove duplicate return
  target: Convert target_core_rd.c to use use BUG_ON
  iscsi-target: Fix leak on failure in iscsi_copy_param_list()
  target: Use ERR_CAST inlined function
  target: Make standard INQUIRY return 'not connected' for tpg_virt_lun0
  ...

I ran into a couple of programs which broke with the new Linux 3.0
version.  Some of those were binary only.  I tried to use LD_PRELOAD to
work around it, but it was quite difficult and in one case impossible
because of a mix of 32bit and 64bit executables.

For example, all kind of management software from HP doesnt work, unless
we pretend to run a 2.6 kernel.

  $ uname -a
  Linux svivoipvnx001 3.0.0-08107-g97cd98f #1062 SMP Fri Aug 12 18:11:45 CEST 2011 i686 i686 i386 GNU/Linux

  $ hpacucli ctrl all show

  Error: No controllers detected.

  $ rpm -qf /usr/sbin/hpacucli
  hpacucli-8.75-12.0

Another notable case is that Python now reports "linux3" from
sys.platform(); which in turn can break things that were checking
sys.platform() == "linux2":

  https://bugzilla.mozilla.org/show_bug.cgi?id=664564

It seems pretty clear to me though it's a bug in the apps that are using
'==' instead of .startswith(), but this allows us to unbreak broken
programs.

This patch adds a UNAME26 personality that makes the kernel report a
2.6.40+x version number instead.  The x is the x in 3.x.

I know this is somewhat ugly, but I didn't find a better workaround, and
compatibility to existing programs is important.

Some programs also read /proc/sys/kernel/osrelease.  This can be worked
around in user space with mount --bind (and a mount namespace)

To use:

  wget ftp://ftp.kernel.org/pub/linux/kernel/people/ak/uname26/uname26.c
  gcc -o uname26 uname26.c
  ./uname26 program
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In commit a144c6a6 ("PM: Print a warning if firmware is requested
when tasks are frozen") we not only printed a warning if somebody tried
to load the firmware when tasks are frozen - we also failed the load.

But that check was done before the check for built-in firmware, and then
when we disallowed usermode helpers during bootup (commit 288d5abe:
"Boot up with usermodehelper disabled"), that actually means that
built-in modules can no longer load their firmware even if the firmware
is built in too.  Which used to work, and some people depended on it for
the R100 driver.

So move the test for usermodehelper_is_disabled() down, to after
checking the built-in firmware.

This should fix:

	https://bugzilla.kernel.org/show_bug.cgi?id=40952Reported-by: NJames Cloos <cloos@hjcloos.com>
Bisected-by: NElimar Riesebieter <riesebie@lxtec.de>
Cc: Michel Dänzer <michel@daenzer.net>
Cc: Rafael Wysocki <rjw@sisk.pl>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for-31-rc3/i2c-fixes' of git://git.fluff.org/bjdooks/linux:
  i2c-nomadik: fix kerneldoc warning
  Revert "i2c-omap: fix static suspend vs. runtime suspend"
  i2c-nomadik: Do not use _interruptible_ variant call

There was a missing struct item in the kerneldoc, add it and fix
another pretty-printing formatting issue with a missing space.
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: wiimote: Add status and return request handlers
  HID: wiimote: Add drm request
  HID: wiimote: Register led class devices
  HID: wiimote: Correctly call HID open/close callbacks
  HID: wiimote: Simplify synchronization
  HID: usbhid: Add support for SiGma Micro chip
  HID: add support for new revision of Apple aluminum keyboard

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: ad714x - read the interrupt status registers in a row
  Input: ad714x - use DMA-safe buffers for spi_write()
  Input: ad714x - fix endianness issues
  Input: ad714xx-spi - force SPI bus into the default 8-bit mode
  Input: ep93xx_keypad - add missing include of linux/module.h
  Input: tnetv107x-ts - add missing include of linux/module.h
  Input: max11801_ts - correct license statement
  Input: atmel_mxt_ts - report pressure information from the driver
  Input: bcm5974 - Add support for newer MacBookPro8,2
  Input: wacom - report id 3 returns 4 bytes of data
  Input: wacom - add WAC_MSG_RETRIES define
  Input: wacom - add support for the Wacom Bamboo Pen (CTL-660/K)
  Input: tegra-kbc - correct call to input_free_device
  Input: mpu3050 - correct call to input_free_device
  Input: bcm5974 - add support for touchpads found in MacBookAir4,2
  Input: mma8450 - fix module device table type
  Input: remove CLOCK_TICK_RATE from analog joystick driver

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: check size of FUSE_NOTIFY_INVAL_ENTRY message
  fuse: mark pages accessed when written to
  fuse: delete dead .write_begin and .write_end aops
  fuse: fix flock
  fuse: fix non-ANSI void function notation

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc: Allow handling signals when stack is corrupted.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (29 commits)
  bridge: fix a possible net_device leak
  net: Documentation: RFC 2553bis is now RFC 3493
  atm: br2684: Fix oops due to skb->dev being NULL
  ipv6: Fix ipv6_getsockopt for IPV6_2292PKTOPTIONS
  net: netdev-features.txt update to Documentation/networking/00-INDEX
  vlan: reset headers on accel emulation path
  forcedeth: call vlan_mode only if hw supports vlans
  via-velocity: remove non-tagged packet filtering
  bonding:reset backup and inactive flag of slave
  net_sched: fix port mirror/redirect stats reporting
  sit tunnels: propagate IPv6 transport class to IPv4 Type of Service
  gianfar: reduce stack usage in gianfar_ethtool.c
  net: minor update to Documentation/networking/scaling.txt
  net: add missing entries to Documentation/networking/00-INDEX
  gianfar: prevent buggy hw rx vlan tagging
  net: sh_eth: Fix build by forgot including linux/interrupt.h
  drivers/net/can/sja1000/plx_pci.c: eliminate double free
  usbnet/cdc_ncm: Don't use stack variables for DMA
  vmxnet3: Don't enable vlan filters in promiscuous mode.
  iwlagn: sysfs couldn't find the priv pointer
  ...

FUSE_NOTIFY_INVAL_ENTRY didn't check the length of the write so the
message processing could overrun and result in a "kernel BUG at
fs/fuse/dev.c:629!"
Reported-by: NHan-Wen Nienhuys <hanwenn@gmail.com>
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>
CC: stable@kernel.org

Function i5k_channel_pci_id looks like it can fail, while a better
code design would make it more obvious that it can't. We can even get
rid of the function.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Acked-by: NDarrick J. Wong <djwong@us.ibm.com>
Signed-off-by: NGuenter Roeck <guenter.roeck@ericsson.com>

Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86-32, vdso: On system call restart after SYSENTER, use int $0x80
  x86, UV: Remove UV delay in starting slave cpus
  x86, olpc: Wait for last byte of EC command to be accepted

When we enter a 32-bit system call via SYSENTER or SYSCALL, we shuffle
the arguments to match the int $0x80 calling convention.  This was
probably a design mistake, but it's what it is now.  This causes
errors if the system call as to be restarted.

For SYSENTER, we have to invoke the instruction from the vdso as the
return address is hardcoded.  Accordingly, we can simply replace the
jump in the vdso with an int $0x80 instruction and use the slower
entry point for a post-restart.
Suggested-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
Link: http://lkml.kernel.org/r/CA%2B55aFztZ=r5wa0x26KJQxvZOaQq8s2v3u50wCyJcA-Sc4g8gQ@mail.gmail.com
Cc: <stable@kernel.org>

Fixes fallout due to the removal of the cast in commit aa462abe
("mm: fix __page_to_pfn for a const struct page argument")
Signed-off-by: NIan Campbell <ian.campbell@citrix.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Acked-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Cc: linux-m68k@lists.linux-m68k.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This reverts commit adf6e079.

Remove system PM methods which can race with runtime PM methods.

Also, as of v3.1, the PM domain level code for OMAP handles device
power state transistions automatically for devices, so drivers no
longer need to specifically call the bus/pm_domain methods themselves.
Signed-off-by: NKevin Hilman <khilman@ti.com>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

If there is a signal pending and wait_for_completion_interruptible_timeout
exited because of the -ERESTARTSYS error we are unable to send any more
i2c messages.

So, deprecate this _interruptible_ variant call.
Signed-off-by: NSrinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

* 'for-linus' of git://oss.sgi.com/xfs/xfs:
  xfs: fix tracing builds inside the source tree
  xfs: remove subdirectories
  xfs: don't expect xfs headers to be in subdirectories

* git://git.infradead.org/users/cbou/battery-3.1:
  s3c-adc-battery: Fix compilation error due to missing header (module.h)
  max8997_charger: Needs module.h
  max8998_charger: Needs module.h

* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/radeon: Extended DDC Probing for Toshiba L300D Radeon Mobility X1100 HDMI-A Connector
  drm/ttm: ensure ttm for new node is bound before calling move_notify()
  drm/ttm: unbind ttm before destroying node in accel move cleanup
  drm/ttm: fix ttm_bo_add_ttm(user) failure path
  drm/radeon: Make vramlimit parameter actually work.
  drm/radeon: Explicitly print GTT/VRAM offsets on test failure.
  drm/radeon: Take IH ring into account for test size calculation.
  drm/radeon/alpha: Add Alpha support to Radeon DRM code

This reverts commit f3637a5f.

It turns out that this breaks several drivers, one example being OMAP
boards which use the on-board OMAP UARTs and the omap-serial driver that
will not boot to userspace after the commit.

Paul Walmsley reports that enabling CONFIG_DEBUG_SHIRQ reveals 'IRQ
handler type mismatch' errors:

  IRQ handler type mismatch for IRQ 74
  current handler: serial idle
  ...

and the reason is that setting IRQF_ONESHOT will now result in those
interrupt handlers having different IRQF flags, and thus being
unsharable.  So the commit log in the reverted commit:

                            "Since it is required for those users and
    there is no difference for others it makes sense to add this flag
    unconditionally."

is simply not true: there may not be any difference from a "actions at
irq time", but there is a *big* difference wrt this flag testing irq
management (see __setup_irq() in kernel/irq/manage.c).

One solution may be to stop verifying IRQF_ONESHOT in __setup_irq(), but
right now the safe course of action is to revert the change.  Let's
revisit this in a later merge window.
Reported-by: NPaul Walmsley <paul@pwsan.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Requested-by: NAlan Cox <alan@lxorguk.ukuu.org.uk>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Toshiba Satellite L300D with ATI Mobility Radeon X1100 sends data
   to i2c bus for a HDMI connector that is not implemented/existent
   on the notebook's board.

   Fix by applying extented DDC probing for this connector.

   Requires [PATCH] drm/radeon: Extended DDC Probing for Connectors
   with Improperly Wired DDC Lines

   Tested for kernel 2.6.38 on Toshiba Satellite L300D notebook

   BugLink: http://bugs.launchpad.net/bugs/826677Signed-off-by: NThomas Reim <reimth@gmail.com>
Acked-by: NChris Routh <routhy@gmail.com>
Cc: <stable@kernel.org>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

The wiimote resets the current drm when an extension is plugged in.
Fortunately, it also sends a status report in this situation so we just
reset the drm on every status report to keep the drm consistent.

Also handle return reports from the wiimote which indicate success and
failure of requests that we've sent.
Signed-off-by: NDavid Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The wiimote reports data in several data reporting modes (DRM). The DRM
request makes the wiimote send data in the requested drm.

The DRM mode can be set explicitely or can be chosen by the driver. To let
the driver choose the DRM mode, pass WIIPROTO_REQ_NULL placeholder to it. This
is no valid request and is replaced with an appropriate DRM.

Currently, the driver always sets the basic DRM_K mode, but this will be
extended when further peripherals like accelerometer and IR are supported.
Signed-off-by: NDavid Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This registers 4 led devices to allow controlling the wiimote leds via standard
LED sysfs API. It removes the four sysfs attributes so we don't have two APIs
for one device.
Signed-off-by: NDavid Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Even though the bluetooth hid backend does not react on open/close callbacks, we
should call them to be consistent with other hid drivers.

Also the new input open/close handlers will be used in future to prepare the
wiimote device for IR/extension input.
Signed-off-by: NDavid Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The new locking scheme in HID core allows us to remove a bit of synchronization.
Since the HID layer acts synchronously we simply register input core last and
there are no synchonization issues anymore.
Also register sysfs files after that to simplify the code.
Signed-off-by: NDavid Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This was true for new TTM_PL_SYSTEM and new TTM_PL_TT cases, but wasn't
the case on TTM_PL_SYSTEM<->TTM_PL_TT moves, which causes trouble on some
paths as nouveau's move_notify() hook requires that the dma addresses be
valid at this point.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Nouveau makes the assumption that if a TTM is bound there will be a mm_node
around for it and the backwards ordering here resulted in a use-after-free
on some eviction paths.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

ttm_tt_destroy kfrees passed object, so we need to nullify
a reference to it.
Signed-off-by: NMarcin Slusarz <marcin.slusarz@gmail.com>
Cc: stable@kernel.org
Reviewed-by: NThomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Patch to add SiGma Micro-based keyboards (1c4f:0002) to hid-quirks.

These keyboards dont seem to allow the records to be initialized, and hence a
timeout occurs when the usbhid driver attempts to initialize them. The patch
just adds the signature for these keyboards to the hid-quirks list with the
setting HID_QUIRK_NO_INIT_REPORTS. This removes the 5-10 second wait for the
timeout to occur.
Signed-off-by: NJeremiah Matthey <sprg86@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Jan Beulich reported a possible net_device leak in bridge code after
commit bb900b27 (bridge: allow creating bridge devices with netlink)
Reported-by: NJan Beulich <JBeulich@novell.com>
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Acked-by: NStephen Hemminger <shemminger@vyatta.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The code really requires the current source directory to be in the
header search path.  We already do this if building with an object
tree separate from the source, but it needs to be added manually
if building inside the source.  The cflags addition for it accidentally
got removed when collapsing the xfs directory structure.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDave Chinner <david@fromorbit.com>
Signed-off-by: NAlex Elder <aelder@sgi.com>

Replace unnecessary if with else statement.

This fixes the following (false) compile warning reported with some combinations
of C compiler version and configuration.

drivers/hwmon/ntc_thermistor.c: In function 'ntc_show_temp':
drivers/hwmon/ntc_thermistor.c:225: warning: 'low' may be used uninitialized in
this function
drivers/hwmon/ntc_thermistor.c:225: note: 'low' was declared here
drivers/hwmon/ntc_thermistor.c:225: warning: 'high' may be used uninitialized in
this function
drivers/hwmon/ntc_thermistor.c:225: note: 'high' was declared here
drivers/hwmon/ntc_thermistor.c:294: warning: 'temp' may be used uninitialized in
this function
Signed-off-by: NGuenter Roeck <guenter.roeck@ericsson.com>
Acked-by: NJean Delvare <khali@linux-fr.org>

With qla2xxx, acl_node_lock is taken inside qla2xxx's hardware_lock,
which is taken in hardirq context.  This means acl_node_lock must become
an IRQ-disabling lock; in particular this fixes lockdep warnings along
the lines of

    ======================================================
    [ INFO: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected ]

     (&(&se_tpg->acl_node_lock)->rlock){+.....}, at: [<ffffffffa026f872>] transport_deregister_session+0x92/0x140 [target_core_mod]

    and this task is already holding:
     (&(&ha->hardware_lock)->rlock){-.-...}, at: [<ffffffffa017c5e7>] qla_tgt_stop_phase1+0x57/0x2c0 [qla2xxx]
    which would create a new lock dependency:
     (&(&ha->hardware_lock)->rlock){-.-...} -> (&(&se_tpg->acl_node_lock)->rlock){+.....}

    but this new dependency connects a HARDIRQ-irq-safe lock:
     (&(&ha->hardware_lock)->rlock){-.-...}

    to a HARDIRQ-irq-unsafe lock:
     (&(&se_tpg->acl_node_lock)->rlock){+.....}
Signed-off-by: NRoland Dreier <roland@purestorage.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>