- 02 5月, 2006 8 次提交
-
-
由 Jeff Dike 提交于
The MADVISE_REMOVE-checking code didn't clean up after itself. Signed-off-by: NJeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jesper Juhl 提交于
Remove redundant NULL checks before [kv]free + small CodingStyle cleanup for arch/ Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com> Signed-off-by: NJeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Joris van Rantwijk 提交于
A quick hack to allow skas0 mode to run on 2G/2G hosts. Signed-off-by: NJeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Victor V. Vengerov 提交于
We need to walk the region list properly. Signed-off-by: NJeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
The apic= option can be used to set the APIC driver too. When that is done this code would always produce bogus warnings. Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
The 32bit version of e820_all_mapped() needs to use u64 to avoid overflows on PAE systems. Pointed out by Jan Beulich Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
The patch I submitted earlier to fix disabled LAPIC handling in ACPI was mismerged for some reason I still don't quite understand. Parts of it was applied to the wrong function. This patch fixes it up. Cc: <len.brown@intel.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 01 5月, 2006 1 次提交
-
-
由 David S. Miller 提交于
A context switch will force a call to flush_tlb_pending() (via switch_to()), so if we test tlb_nr to be non-zero, then sleep, it would become zero and later back at the original context we'll pass zero down into the TLB flushing code which should never see a nr argument of zero. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 4月, 2006 3 次提交
-
-
由 Arnd Bergmann 提交于
reflect the changes to Kconfig since the last update. Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Arnd Bergmann 提交于
This patch disables and saves local interrupts during hash_page processing for SPE contexts. We have to do it explicitly in the spu_irq_class_1_bottom function. For the interrupt handlers, we get the behaviour implicitly by using SA_INTERRUPT to disable interrupts while in the handler. Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Anton Blanchard 提交于
Add a cputable entry for the POWER6 processor. The SIHV and SIPR bits in the mmcra have moved in POWER6, so disable support for that until oprofile is fixed. Also tell firmware that we know about POWER6. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 28 4月, 2006 24 次提交
-
-
由 Martin Schwidefsky 提交于
Add sys_set_robust_list, sys_get_robust_list, sys_splice, sys_sync_file and sys_tee system calls. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Christian Borntraeger 提交于
Add a read_mostly section and define __read_mostly to prevent cache line pollution due to writes for mostly read variables. In addition fix the incorrect alignment of the cache_line_aligned data section. s390 has a cacheline size of 256 bytes. Signed-off-by: NChristian Borntraeger <cborntra@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Gerald Schaefer 提交于
Print a warning with the z/VM error code if segment_load, segment_type or segment_save fail to ease the problem determination. Signed-off-by: NGerald Schaefer <geraldsc@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Laurent Meyer 提交于
If a signal handler has been established with the SA_ONSTACK option but no alternate stack is provided with sigaltstack(), the kernel still tries to install the alternate stack. Also when setting an alternate stack with sigalstack() and the SS_DISABLE flag, the kernel tries to install the alternate stack on signal delivery. Use the correct conditions sas_ss_flags() to check if the alternate stack has to be used. Signed-off-by: NLaurent Meyer <meyerlau@fr.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Masami Hiramatsu 提交于
Fix resume_execution() to handle iret and absolute jump opcode correctly on i386. Signed-off-by: NMasami Hiramatsu <hiramatu@sdl.hitachi.co.jp> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: "Keshavamurthy, Anil S" <anil.s.keshavamurthy@intel.com> Cc: Prasanna S Panchamukhi <prasanna@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Yumiko Sugita <sugita@sdl.hitachi.co.jp> Cc: Satoshi Oshima <soshima@redhat.com> Cc: Hideo Aoki <haoki@redhat.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 mao, bibo 提交于
When trap happens in user space, kprobe_exceptions_notify() funtion will skip it. This patch deletes some unnecessary code for VM_MASK judgement in eflags. Signed-off-by: Nbibo, mao <bibo.mao@intel.com> Cc: Masami Hiramatsu <hiramatu@sdl.hitachi.co.jp> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Acked-by: N"Keshavamurthy, Anil S" <anil.s.keshavamurthy@intel.com> Acked-by: NPrasanna S Panchamukhi <prasanna@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Yumiko Sugita <sugita@sdl.hitachi.co.jp> Cc: Satoshi Oshima <soshima@redhat.com> Cc: Hideo Aoki <haoki@redhat.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
Running abnormal VM splits causes weird problems - people can set non-standard splits by accident, then lots of time gets wasted diagnosing it - see the long "[stable] 2.6.16.6 breaks java... sort of" email thread. So we need to make this option harder to set. Use CONFIG_EMBEDDED for this. CONFIG_EMBEDDED isn't really the right thing to use, but there's nothing else obvious and avoiding these problems is more important than Kconfig purity. Signed-off-by: NAndi Kleen <ak@suse.de> Cc: Adrian Bunk <bunk@stusta.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Ashok Raj 提交于
CPU_HOTPLUG has race conditions when we use broadcast mode IPI. - First we introduced no_broadcast option (see include/asm-i386/mach-default/mach_ipi.h) - x86_64 solved it by using physical flat mode (same as bigsmp on i386) since this will not use broadcast shortcuts for IPI. - We switched to use bigsmp on i386 so that we can have same handling as x86_64, but apparently this caused an error message, if kernel was compiled without X86_GENERICARCH, X86_BIGSMP. The message "You have >8 CPUS..." which was bogus and misleading, and only indicated one of the above ARCH wasnt selected. So we do not switch to automatic bigsmp for HOTPLUG_CPU support in i386 until the other related config dependencies for SMP_SUSPEND etc can be done right. Signed-off-by: NAshok Raj <ashok.raj@intel.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Dave Jones 提交于
These messages are kinda silly.. CPU#0 had 0 usecs TSC skew, fixed it up. CPU#1 had 0 usecs TSC skew, fixed it up. inspired from: http://bugzilla.kernel.org/attachment.cgi?id=7713&action=viewSigned-off-by: NDave Jones <davej@redhat.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Vitaly Bordug 提交于
This has the relevant updates/additions to the BSP code so that proper platform_info struct well be passed to the CPM UART drivers. The changes covered mpc866ads, mpc885ads and mpc8272ads. Signed-off-by: NVitaly Bordug <vbordug@ru.mvista.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Vitaly Bordug 提交于
This consists of offsets fix in ..._devices.c, and update of ppc_sys_fixup_mem_resource() function to prevent subsequent fixups Signed-off-by: NVitaly Bordug <vbordug@ru.mvista.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Andreas Schwab 提交于
Wire up *at syscalls. This patch has been tested on ppc64 (using glibc's testsuite, both 32bit and 64bit), and compile-tested for ppc32 (I have currently no ppc32 system available, but I expect no problems). Signed-off-by: NAndreas Schwab <schwab@suse.de> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Eugene Surovegin 提交于
This patch adds workaround for PPC 440GX erratum 440_43. According to this erratum spurious MachineChecks (caused by L1 cache parity) can happen during DataTLB miss processing. We disable L1 cache parity checking for 440GX rev.C and rev.F Signed-off-by: NEugene Surovegin <ebs@ebshome.net> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 David Woodhouse 提交于
Some people report that we die on some Macs when we are expecting to catch machine checks after poking at some random I/O address. I'd seen it happen on my dual G4 with serial ports until we fixed those to use OF, but now other users are reporting it with i8042. This expands the use of check_legacy_ioport() to avoid that situation even on 32-bit kernels. Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Alan Modra 提交于
Normally, ppc64 module .ko files contain a table-of-contents (.toc) section, but if the module doesn't reference any static or external data or external procedures, it is possible for gcc/binutils to generate a .ko that doesn't have a .toc. Currently the module loader refuses to load such a module, since it needs the address of the .toc section to use in relocations. This patch fixes the problem by using the address of the .stubs section instead, which is an acceptable substitute in this situation. Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Paul Mackerras 提交于
This adds code to call a new firmware method to tell the firmware what machines and capabilities (such as VMX/Altivec) we support. This will be needed on POWER5+ and POWER6 machines, and it has no effect on past and current machines. Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 David Gibson 提交于
At present, ARCH=powerpc kernels can waste considerable space in pagetables when making large hugepage mappings. Hugepage PTEs go in PMD pages, but each PMD page maps 256M and so contains only 16 hugepage PTEs (128 bytes of data), but takes up a 1024 byte allocation. With CONFIG_PPC_64K_PAGES enabled (64k base page size), the situation is worse. Now hugepage PTEs are at the PTE page level (also mapping 256M), so we store 16 hugepage PTEs in a 64k allocation. The PowerPC MMU already means that any 256M region is either all hugepage, or all normal pages. Thus, with some care, we can use a different allocation for the hugepage PTE tables and only allocate the 128 bytes necessary. Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Jes Sorensen 提交于
Update SN2 defconfig to latest kernel and add QLA FC drivers commonly found in SN2 boxes. Signed-off-by: NJes Sorensen <jes@sgi.com> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Russ Anderson 提交于
When the mca recovery code encounters a condition that makes the MCA non-recoverable, print the reason it could not recover. This will make it easier to identify why the recovery code did not recover. Signed-off-by: NRuss Anderson <rja@sgi.com> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Mike Habeck 提交于
The following patch fixes a bug in the SGI Altix tioce_reserve_m32() code. The bug was that we could walking past the end of the CE ASIC 32/40bit PMU ATE Buffer, resulting in a PIO Reply Error. Signed-off-by: NMike Habeck <habeck@sgi.com> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Jack Steiner 提交于
MPI programs using certain debug options have a long startup time. This was traced to a "vmalloc/vfree" in the code that reads /proc/sgi_sn/sn_topology. On large systems, vfree requires an IPI to all cpus to do TLB purging. Replace the vmalloc/vfree with kmalloc/kfree. Although the size of the structure being allocated is unknown, it will not not exceed 96 bytes. Signed-off-by: NJack Steiner <steiner@sgi.com> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Jack Steiner 提交于
Fix a bug that causes discovery of the nearest node/cpu to a TIO (IO node) to fail. Signed-off-by: NJack Steiner <steiner@sgi.com> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Greg Kroah-Hartman 提交于
This device id improperly got added to the VIA chipset list with a previous patch. Remove it as it is not correct. Cc: Grzegorz Janoszka <Grzegorz@Janoszka.pl> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Jean Delvare 提交于
We could use the recently added PCI_CLASS_SERIAL_USB_UHCI, PCI_CLASS_SERIAL_USB_OHCI and PCI_CLASS_SERIAL_USB_EHCI defines in more places, for slightly shorter and clearer code. Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 27 4月, 2006 4 次提交
-
-
由 Ralf Baechle 提交于
In the branch emulation for floating-point exceptions, __compute_return_epc must determine for bc1f et al which condition code bit to test. This is based on bits <4:2> of the rt field. The switch statement to distinguish bc1f et al needs to use only the two low bits of rt, but the old code tests on the whole rt field. This patch masks off the proper bits. Signed-off-by: NWin Treese <treese@acm.org> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
imajor()/iminor() should be used instead of accessing r_dev directly. Based on patch from Eric Sesterhenn (snakebyte@gmx.de). Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
It's been a horrible source of confusion and let users to shoot themselves into both feet with uzis to no end. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-