- 28 2月, 2017 17 次提交
-
-
由 Arnd Bergmann 提交于
The tegra DRM driver produces a harmless warning when built for NOMMU: drivers/gpu/drm/tegra/gem.c: In function 'tegra_drm_mmap': drivers/gpu/drm/tegra/gem.c:508:12: unused variable 'prot' This is because pgprot_writecombine() on ARM returns a constant and ignores its argument. The version in asm-generic doesn't have that problem, so let's use that one instead. We don't actually care about the value on NOMMU, and this is consistent with what some other architectures do. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NThierry Reding <treding@nvidia.com> Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>
-
由 Arnd Bergmann 提交于
The decompress.c file contains a declaration for strstr() so we can include some compression library code. With the updated LZ4 implementation, we run into the same problem again for strlen(): In file included from ../include/linux/rcupdate.h:40:0, from ../include/linux/srcu.h:33, from ../include/linux/notifier.h:15, from ../include/linux/memory_hotplug.h:6, from ../include/linux/mmzone.h:749, from ../include/linux/gfp.h:5, from ../include/linux/kmod.h:22, from ../include/linux/module.h:13, from ../arch/arm/boot/compressed/../../../../lib/lz4/lz4_decompress.c:39, from ../arch/arm/boot/compressed/../../../../lib/decompress_unlz4.c:13, from ../arch/arm/boot/compressed/decompress.c:55: include/linux/cpumask.h: In function 'cpumask_parse': include/linux/cpumask.h:592:53: error: implicit declaration of function 'strlen';did you mean 'strstr'? [-Werror=implicit-function-declaration] This adds another declaration to work around the new problem. Fixes: ce83d9ab80d6 ("lib: update LZ4 compressor module") Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>
-
由 Masahiro Yamada 提交于
Now, the active way setup function is called with a fixed value zero for the second argument. The code can be simpler. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>
-
由 Masahiro Yamada 提交于
Nothing in this header file depends on <linux/types.h>. Rather, <linux/errno.h> should be included for -ENODEV. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>
-
由 Ard Biesheuvel 提交于
According to the spec 'ELF for the ARM Architecture' (IHI 0044E), addends for R_ARM_PREL31 relocations are 31-bit signed quantities, so we need to sign extend the value to 32 bits before it can be used as an offset in the calculation of the relocated value. We have not been bitten by this because these relocations are usually emitted against the start of a section, which means the addends never assume negative values in practice. But it is a bug nonetheless, so fix it. Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>
-
由 Afzal Mohammed 提交于
Now that exception based address is handled dynamically for processors with CP15, remove Hivecs configuration in assembly. Signed-off-by: Nafzal mohammed <afzal.mohd.ma@gmail.com> Tested-by: NVladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>
-
由 Afzal Mohammed 提交于
VECTORS_BASE displays the exception base address. Now on no-MMU as the exception base address is dynamically estimated, define VECTORS_BASE to the variable holding it. As it is the case, limit VECTORS_BASE constant definition to MMU. Suggested-by: NRussell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Nafzal mohammed <afzal.mohd.ma@gmail.com> Tested-by: NVladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>
-
由 Afzal Mohammed 提交于
No-MMU dynamic exception base address configuration on CP15 processors. In the case of low vectors, decision based on whether security extensions are enabled & whether remap vectors to RAM CONFIG option is selected. For no-MMU without CP15, current default value of 0x0 is retained. Signed-off-by: Nafzal mohammed <afzal.mohd.ma@gmail.com> Tested-by: NVladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>
-
由 Afzal Mohammed 提交于
For MMU configurations, VECTORS_BASE is always 0xffff0000, a macro definition will suffice. For no-MMU, exception base address is dynamically determined in subsequent patches. To preserve bisectability, now make the macro applicable for no-MMU scenario too. Thanks to 0-DAY kernel test infrastructure that found the bisectability issue. This macro will be restricted to MMU case upon dynamically determining exception base address for no-MMU. Once exception address is handled dynamically for no-MMU, VECTORS_BASE can be removed from Kconfig. Signed-off-by: Nafzal mohammed <afzal.mohd.ma@gmail.com> Tested-by: NVladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Florian Fainelli 提交于
Similar to c68b0274 ("ARM: reduce "Booted secondary processor" message to debug level"), demote the "CPU: shutdown" pr_notice() into a pr_debug(). Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Florian Fainelli 提交于
All low-level PM/SMP code using virt_to_phys() should actually use __pa_symbol() against kernel symbols. Update code where relevant to move away from virt_to_phys(). Acked-by: NRussell King <rmk+kernel@armlinux.org.uk> Reviewed-by: NLaura Abbott <labbott@redhat.com> Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Florian Fainelli 提交于
x86 has an option: CONFIG_DEBUG_VIRTUAL to do additional checks on virt_to_phys calls. The goal is to catch users who are calling virt_to_phys on non-linear addresses immediately. This includes caller using __virt_to_phys() on image addresses instead of __pa_symbol(). This is a generally useful debug feature to spot bad code (particulary in drivers). Acked-by: NRussell King <rmk+kernel@armlinux.org.uk> Acked-by: NLaura Abbott <labbott@redhat.com> Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
-
由 Florian Fainelli 提交于
In preparation for adding CONFIG_DEBUG_VIRTUAL support, define a set of common constants: KERNEL_START and KERNEL_END which abstract CONFIG_XIP_KERNEL vs. !CONFIG_XIP_KERNEL. Update the code where relevant. Acked-by: NRussell King <rmk+kernel@armlinux.org.uk> Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Florian Fainelli 提交于
In preparation for defining KERNEL_START on ARM, rename KERNEL_START to PART_KERNEL_START, and to be consistent, do this for all partition-related constants. Acked-by: NBoris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Laura Abbott 提交于
adjust_lowmem_bounds is responsible for setting up the boundary for lowmem/highmem. This needs to be setup before memblock reservations can occur. At the time memblock reservations can occur, memory can also be removed from the system. The lowmem/highmem boundary and end of memory may be affected by this but it is currently not recalculated. On some systems this may be harmless, on others this may result in incorrect ranges being passed to the main memory allocator. Correct this by recalculating the lowmem/highmem boundary after all reservations have been made. Tested-by: NMagnus Lilja <lilja.magnus@gmail.com> Signed-off-by: NLaura Abbott <labbott@redhat.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Laura Abbott 提交于
The logic for sanity_check_meminfo has become difficult to follow. Clean up the code so it's more obvious what the code is actually trying to do. Additionally, meminfo is now removed so rename the function to better describe its purpose. Tested-by: NMagnus Lilja <lilja.magnus@gmail.com> Reviewed-by: NNicolas Pitre <nico@linaro.org> Signed-off-by: NLaura Abbott <lauraa@codeaurora.org> Signed-off-by: NLaura Abbott <labbott@redhat.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 11 1月, 2017 10 次提交
-
-
由 Laura Abbott 提交于
__pa_symbol is technically the macro that should be used for kernel symbols. Switch to this as a pre-requisite for DEBUG_VIRTUAL which will do bounds checking. Reviewed-by: NMark Rutland <mark.rutland@arm.com> Tested-by: NMark Rutland <mark.rutland@arm.com> Signed-off-by: NLaura Abbott <labbott@redhat.com> Signed-off-by: NWill Deacon <will.deacon@arm.com>
-
由 Laura Abbott 提交于
The usercopy checking code currently calls __va(__pa(...)) to check for aliases on symbols. Switch to using lm_alias instead. Reviewed-by: NMark Rutland <mark.rutland@arm.com> Tested-by: NMark Rutland <mark.rutland@arm.com> Acked-by: NKees Cook <keescook@chromium.org> Signed-off-by: NLaura Abbott <labbott@redhat.com> Signed-off-by: NWill Deacon <will.deacon@arm.com>
-
由 Laura Abbott 提交于
__pa_symbol is the correct API to find the physical address of symbols. Switch to it to allow for debugging APIs to work correctly. Other functions such as p*d_populate may call __pa internally. Ensure that the address passed is in the linear region by calling lm_alias. Reviewed-by: NMark Rutland <mark.rutland@arm.com> Tested-by: NMark Rutland <mark.rutland@arm.com> Signed-off-by: NLaura Abbott <labbott@redhat.com> Signed-off-by: NWill Deacon <will.deacon@arm.com>
-
由 Laura Abbott 提交于
__pa_symbol is the correct api to get the physical address of kernel symbols. Switch to it to allow for better debug checking. Reviewed-by: NMark Rutland <mark.rutland@arm.com> Tested-by: NMark Rutland <mark.rutland@arm.com> Acked-by: N"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: NLaura Abbott <labbott@redhat.com> Signed-off-by: NWill Deacon <will.deacon@arm.com>
-
由 Laura Abbott 提交于
Certain architectures may have the kernel image mapped separately to alias the linear map. Introduce a macro lm_alias to translate a kernel image symbol into its linear alias. This is used in part with work to add CONFIG_DEBUG_VIRTUAL support for arm64. Reviewed-by: NMark Rutland <mark.rutland@arm.com> Tested-by: NMark Rutland <mark.rutland@arm.com> Signed-off-by: NLaura Abbott <labbott@redhat.com> Signed-off-by: NWill Deacon <will.deacon@arm.com>
-
由 Laura Abbott 提交于
6b101e2a ("mm/CMA: fix boot regression due to physical address of high_memory") added checks to use __pa_nodebug on x86 since CONFIG_DEBUG_VIRTUAL complains about high_memory not being linearlly mapped. arm64 is now getting support for CONFIG_DEBUG_VIRTUAL as well. Rather than add an explosion of arches to the #ifdef, switch to an alternate method to calculate the physical start of highmem using the page before highmem starts. This avoids the need for the #ifdef and extra __pa_nodebug calls. Reviewed-by: NMark Rutland <mark.rutland@arm.com> Tested-by: NMark Rutland <mark.rutland@arm.com> Signed-off-by: NLaura Abbott <labbott@redhat.com> Signed-off-by: NWill Deacon <will.deacon@arm.com>
-
由 Laura Abbott 提交于
DEBUG_VIRTUAL currently depends on DEBUG_KERNEL && X86. arm64 is getting the same support. Rather than add a list of architectures, switch this to ARCH_HAS_DEBUG_VIRTUAL and let architectures select it as appropriate. Acked-by: NIngo Molnar <mingo@kernel.org> Reviewed-by: NMark Rutland <mark.rutland@arm.com> Tested-by: NMark Rutland <mark.rutland@arm.com> Suggested-by: NMark Rutland <mark.rutland@arm.com> Signed-off-by: NLaura Abbott <labbott@redhat.com> Signed-off-by: NWill Deacon <will.deacon@arm.com>
-
由 Afzal Mohammed 提交于
REMAP_VECTORS_TO_RAM depends on DRAM_BASE, but since DRAM_BASE is a hex, REMAP_VECTORS_TO_RAM could never get enabled. Also depending on DRAM_BASE is redundant as whenever REMAP_VECTORS_TO_RAM makes itself available to Kconfig, DRAM_BASE also is available as the Kconfig gets sourced on !MMU. Signed-off-by: NAfzal Mohammed <afzal.mohd.ma@gmail.com> Reviewed-by: NVladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Benjamin Gaignard 提交于
commit ab6494f0 ("nommu: Add noMMU support to the DMA API") have add CONFIG_MMU compilation flag but that prohibit to use dma_mmap_wc() when the platform doesn't have MMU. This patch call vm_iomap_memory() in noMMU case to test if addresses are correct and set vma->vm_flags rather than all return an error. Signed-off-by: NBenjamin Gaignard <benjamin.gaignard@linaro.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Rabin Vincent 提交于
When the data cache is PIPT or VIPT non-aliasing, and cache operations are broadcast by the hardware, we can always postpone the flush in flush_dcache_page(). A similar change was done for ARM64 in commit b5b6c9e9 ("arm64: Avoid cache flushing in flush_dcache_page()"). Reviewed-by: NCatalin Marinas <catalin.marinas@arm.com> Signed-off-by: NRabin Vincent <rabinv@axis.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 02 1月, 2017 2 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm由 Linus Torvalds 提交于
Pull DAX updates from Dan Williams: "The completion of Jan's DAX work for 4.10. As I mentioned in the libnvdimm-for-4.10 pull request, these are some final fixes for the DAX dirty-cacheline-tracking invalidation work that was merged through the -mm, ext4, and xfs trees in -rc1. These patches were prepared prior to the merge window, but we waited for 4.10-rc1 to have a stable merge base after all the prerequisites were merged. Quoting Jan on the overall changes in these patches: "So I'd like all these 6 patches to go for rc2. The first three patches fix invalidation of exceptional DAX entries (a bug which is there for a long time) - without these patches data loss can occur on power failure even though user called fsync(2). The other three patches change locking of DAX faults so that ->iomap_begin() is called in a more relaxed locking context and we are safe to start a transaction there for ext4" These have received a build success notification from the kbuild robot, and pass the latest libnvdimm unit tests. There have not been any -next releases since -rc1, so they have not appeared there" * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: ext4: Simplify DAX fault path dax: Call ->iomap_begin without entry lock during dax fault dax: Finish fault completely when loading holes dax: Avoid page invalidation races and unnecessary radix tree traversals mm: Invalidate DAX radix tree entries only if appropriate ext2: Return BH_New buffers for zeroed blocks
-
- 31 12月, 2016 2 次提交
-
-
git://git.lwn.net/linux由 Linus Torvalds 提交于
Pull documentation fixes from Jonathan Corbet: "Two small fixes: - A merge error on my part broke the DocBook build. I've requisitioned one of tglx's frozen sharks for appropriate disciplinary action and resolved to be more careful about testing the DocBook stuff as long as it's still around. - Fix an error in unaligned-memory-access.txt" * tag 'docs-4.10-rc1-fix' of git://git.lwn.net/linux: Documentation/unaligned-memory-access.txt: fix incorrect comparison operator docs: Fix build failure
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6由 Linus Torvalds 提交于
Pull crypto fix from Herbert Xu: "This fixes a boot failure on some platforms when crypto self test is enabled along with the new acomp interface" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: testmgr - Use heap buffer for acomp test input
-
- 30 12月, 2016 2 次提交
-
-
由 Olof Johansson 提交于
mm/filemap.c: In function 'clear_bit_unlock_is_negative_byte': mm/filemap.c:933:9: error: too few arguments to function 'test_bit' return test_bit(PG_waiters); ^~~~~~~~ Fixes: b91e1302 ('mm: optimize PageWaiters bit use for unlock_page()') Signed-off-by: NOlof Johansson <olof@lixom.net> Brown-paper-bag-by: NLinus Torvalds <dummy@duh.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
In commit 62906027 ("mm: add PageWaiters indicating tasks are waiting for a page bit") Nick Piggin made our page locking no longer unconditionally touch the hashed page waitqueue, which not only helps performance in general, but is particularly helpful on NUMA machines where the hashed wait queues can bounce around a lot. However, the "clear lock bit atomically and then test the waiters bit" sequence turns out to be much more expensive than it needs to be, because you get a nasty stall when trying to access the same word that just got updated atomically. On architectures where locking is done with LL/SC, this would be trivial to fix with a new primitive that clears one bit and tests another atomically, but that ends up not working on x86, where the only atomic operations that return the result end up being cmpxchg and xadd. The atomic bit operations return the old value of the same bit we changed, not the value of an unrelated bit. On x86, we could put the lock bit in the high bit of the byte, and use "xadd" with that bit (where the overflow ends up not touching other bits), and look at the other bits of the result. However, an even simpler model is to just use a regular atomic "and" to clear the lock bit, and then the sign bit in eflags will indicate the resulting state of the unrelated bit #7. So by moving the PageWaiters bit up to bit #7, we can atomically clear the lock bit and test the waiters bit on x86 too. And architectures with LL/SC (which is all the usual RISC suspects), the particular bit doesn't matter, so they are fine with this approach too. This avoids the extra access to the same atomic word, and thus avoids the costly stall at page unlock time. The only downside is that the interface ends up being a bit odd and specialized: clear a bit in a byte, and test the sign bit. Nick doesn't love the resulting name of the new primitive, but I'd rather make the name be descriptive and very clear about the limitation imposed by trying to work across all relevant architectures than make it be some generic thing that doesn't make the odd semantics explicit. So this introduces the new architecture primitive clear_bit_unlock_is_negative_byte(); and adds the trivial implementation for x86. We have a generic non-optimized fallback (that just does a "clear_bit()"+"test_bit(7)" combination) which can be overridden by any architecture that can do better. According to Nick, Power has the same hickup x86 has, for example, but some other architectures may not even care. All these optimizations mean that my page locking stress-test (which is just executing a lot of small short-lived shell scripts: "make test" in the git source tree) no longer makes our page locking look horribly bad. Before all these optimizations, just the unlock_page() costs were just over 3% of all CPU overhead on "make test". After this, it's down to 0.66%, so just a quarter of the cost it used to be. (The difference on NUMA is bigger, but there this micro-optimization is likely less noticeable, since the big issue on NUMA was not the accesses to 'struct page', but the waitqueue accesses that were already removed by Nick's earlier commit). Acked-by: NNick Piggin <npiggin@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Bob Peterson <rpeterso@redhat.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Andrew Lutomirski <luto@kernel.org> Cc: Andreas Gruenbacher <agruenba@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 28 12月, 2016 7 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6由 Linus Torvalds 提交于
Pull crypto fix from Herbert Xu: "This fixes a hash corruption bug in the marvell driver" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: marvell - Copy IVDIG before launching partial DMA ahash requests
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) Various ipvlan fixes from Eric Dumazet and Mahesh Bandewar. The most important is to not assume the packet is RX just because the destination address matches that of the device. Such an assumption causes problems when an interface is put into loopback mode. 2) If we retry when creating a new tc entry (because we dropped the RTNL mutex in order to load a module, for example) we end up with -EAGAIN and then loop trying to replay the request. But we didn't reset some state when looping back to the top like this, and if another thread meanwhile inserted the same tc entry we were trying to, we re-link it creating an enless loop in the tc chain. Fix from Daniel Borkmann. 3) There are two different WRITE bits in the MDIO address register for the stmmac chip, depending upon the chip variant. Due to a bug we could set them both, fix from Hock Leong Kweh. 4) Fix mlx4 bug in XDP_TX handling, from Tariq Toukan. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: net: stmmac: fix incorrect bit set in gmac4 mdio addr register r8169: add support for RTL8168 series add-on card. net: xdp: remove unused bfp_warn_invalid_xdp_buffer() openvswitch: upcall: Fix vlan handling. ipv4: Namespaceify tcp_tw_reuse knob net: korina: Fix NAPI versus resources freeing net, sched: fix soft lockup in tc_classify net/mlx4_en: Fix user prio field in XDP forward tipc: don't send FIN message from connectionless socket ipvlan: fix multicast processing ipvlan: fix various issues in ipvlan_process_multicast()
-
由 Cihangir Akturk 提交于
In the actual implementation ether_addr_equal function tests for equality to 0 when returning. It seems in commit 0d74c4 it is somehow overlooked to change this operator to reflect the actual function. Signed-off-by: NCihangir Akturk <cakturk@gmail.com> Signed-off-by: NJonathan Corbet <corbet@lwn.net>
-
由 John Brooks 提交于
The 80211.tmpl DocBook file was removed in commit 819bf593 ("docs-rst: sphinxify 802.11 documentation"), but the 80211.xml target was re-added to the Makefile by commit 7ddedebb ("ALSA: doc: ReSTize writing-an-alsa-driver document"), leading to a failure when building the documentation: *** No rule to make target 'Documentation/DocBook/80211.xml', needed by 'Documentation/DocBook/80211.aux.xml'. cc: stable@vger.kernel.org Signed-off-by: NJohn Brooks <john@fastquake.com> Mea-culpa-by: NJonathan Corbet <corbet@lwn.net> Signed-off-by: NJonathan Corbet <corbet@lwn.net>
-
由 Jonathan Corbet 提交于
Linux 4.10-rc1
-
由 Kweh, Hock Leong 提交于
Fixing the gmac4 mdio write access to use MII_GMAC4_WRITE only instead of OR together with MII_WRITE. Signed-off-by: NKweh, Hock Leong <hock.leong.kweh@intel.com> Acked-By: NJoao Pinto <jpinto@synopsys.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Chun-Hao Lin 提交于
This chip is the same as RTL8168, but its device id is 0x8161. Signed-off-by: NChun-Hao Lin <hau@realtek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-