The mcp61 has bug with ncq.
Signed-off-by: NKuan Luo <kluo@nvidia.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

I guess Windows didn't care about the command so neither did they
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

P5W-DH Deluxe has ICH9 which doesn't have PMP support but SIMG 4726
hardwired to the second port of AHCI controller at PCI device 1f.2.
The 4726 doesn't work as PMP but as a storage processor which can do
hardware RAID on downstream ports.

When no device is attached to the downstream port of the 4726, pseudo
ATA device for configuration appears.  Unfortunately, ATA emulation on
the device is very lousy and causes long hang during boot.

This patch implements workaround for the board.  If the mainboard is
P5W-DH Deluxe (matched using DMI), only hardreset is used on the
second port of AHCI controller @ 1f.2 and the hardreset doesn't depend
on receiving the first FIS and just proceed to IDENTIFY.

This workaround fixes bugzilla #8923.

  http://bugzilla.kernel.org/show_bug.cgi?id=8923Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Signed-off-by: NJeff Garzik <jeff@garzik.org>

Local variable @action usage in ata_eh_reset() is a bit confusing.
It's used only to cache ehc->i.action to test reset masks after
clearing it; however, due to the generic name "action", it's easy to
misinterpret the local variable as containing the selected reset
method later.  Also, the reason for caching the original value is easy
to miss.

This patch renames @action to @tmp_action and make it buffer newly
selected value instead to improve readability.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

strn_pattern_cmp() and ata_port_detach() can become static.
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

The patch is big.  Really big.  You just won't believe how vastly hugely
mindbogglingly big it is.  I mean you may think it's a long way down the
road to the chemist, but that's just peanuts to how big the patch from
2.6.23 is.

But it's all good.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add a port type definition for the Freescale UART driver ports (mcf.c).
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove old definitions of the timer function pointers.
Add definitions of the common hardware timer functions.
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Create definition for DMA channels on the ColdFire 532x family.
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add platform support structure for use with new ColdFire UART driver.
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Mark the m68knommu memory init functions as __init.
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Mark the m68knommu setup_arch() function as __init.
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Removed header includes not needed.
Remove use of old m68knommu timer function pointers.
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Clean up 68EZ328 timer support code. Removed header includes not needed.
Remove use of old m68knommu timer function pointers.
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Clean up 68360 timer support code. Removed header includes not needed.
Remove use of old m68knommu timer function pointers. Use common function
naming for 68328 timer functions.
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use common function naming for 68328 timer functions to make them
consistent with the various other hardware m68knommu timers.
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Clean up 68328 timer support code. Removed header includes not needed.
Remove use of old m68knommu timer function pointers.
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove unused variables from setup.c code.
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'irq-upstream' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/misc-2.6:
  [SPARC, XEN, NET/CXGB3] use irq_handler_t where appropriate
  drivers/char/riscom8: clean up irq handling
  isdn/sc: irq handler clean
  isdn/act2000: fix major bug. clean irq handler.
  char/pcmcia/synclink_cs: trim trailing whitespace
  drivers/char/ip2: separate polling and irq-driven work entry points
  drivers/char/ip2: split out irq core logic into separate function
  [NETDRVR] lib82596, netxen: delete pointless tests from irq handler
  Eliminate pointless casts from void* in a few driver irq handlers.
  [PARPORT] Remove unused 'irq' argument from parport irq functions
  [PARPORT] Kill useful 'irq' arg from parport_{generic_irq,ieee1284_interrupt}
  [PARPORT] Consolidate code copies into a single generic irq handler

* 'warnings' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/misc-2.6:
  ni5010: kill unused variable
  eexpress: fix !SMP unused-var warning
  cgroup: kill unused variable

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (39 commits)
  Remove Andrew Morton from list of net driver maintainers.
  bonding: Acquire correct locks in alb for promisc change
  bonding: Convert more locks to _bh, acquire rtnl, for new locking
  bonding: Convert locks to _bh, rework alb locking for new locking
  bonding: Convert miimon to new locking
  bonding: Convert balance-rr transmit to new locking
  Convert bonding timers to workqueues
  Update MAINTAINERS to reflect my (jgarzik's) current efforts.
  pasemi_mac: fix typo
  defxx.c: dfx_bus_init() is __devexit not __devinit
  s390 MAINTAINERS
  remove header_ops bug in qeth driver
  sky2: crash on remove
  MIPSnet: Delete all the useless debugging printks.
  AR7 ethernet: small post-merge cleanups and fixes
  mv643xx_eth: Hook up mv643xx_get_sset_count
  mv643xx_eth: Remove obsolete checksum offload comment
  mv643xx_eth: Merge drivers/net/mv643xx_eth.h into mv643xx_eth.c
  mv643xx_eth: Remove unused register defines
  mv643xx_eth: Clean up mv643xx_eth.h
  ...

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  jmicron: update quirk for JMB361/3/5/6
  libata: add HTS542525K9SA00 to NCQ blacklist
  libata-core: auditting chk_status v check_status
  [libata] checkpatch-inspired cleanups

Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Set bits 0, 4, 5 and 7 of PCI configuration register 0x40 in the
quirk.  This has the following effects and is recommended by the
vendor.

* Force enable of IDE channels (used to be left alone as BIOS
  configured)

* Change initial phase behavior of PIO cycle such that the host pulls
  down the bus instead of tristating it.  Vendor recommends this
  setting.

The above settings are better for the current generation of
controllers and needed for the upcoming next generation.

Tested on JMB363.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Cc: Ethan Hsiao <ethanhsiao@jmicron.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Another one doing spurious NCQ completions.  Blacklist it.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Cc: Luca Tettamanti <kronos.it@gmail.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Did a complete audit of these and found we have another error case.

ata_bus_softreset calls ata_check_status which means that it tries to do
an ioread8 on the port blindly and check versus 0xFF for an error.

It should of course be using the ap->ops method for this via chk_status,
and this bug causes a wrog status call on the NS87415 at least.
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Tackle the relatively sane complaints of checkpatch --file.

The vast majority is indentation and whitespace changes, the rest are

* #include fixes
* printk KERN_xxx prefix addition
* BSS/initializer cleanups
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

He now rules the world, not just this tiny tract of land.
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
Acked-by: Andrew Morton

	Update ALB mode monitor to hold correct locks (RTNL and nothing
else) when calling dev_set_promiscuity.
Signed-off-by: NAndy Gospodarek <andy@greyhouse.net>
Signed-off-by: NJay Vosburgh <fubar@us.ibm.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

	Convert more lock acquisitions to _bh flavor to avoid deadlock
with workqueue activity and add acquisition of RTNL in appropriate places.
Affects ALB mode, as well as core bonding functions and sysfs.
Signed-off-by: NAndy Gospodarek <andy@greyhouse.net>
Signed-off-by: NJay Vosburgh <fubar@us.ibm.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

	Convert locking-related activity to new & improved system.
Convert some lock acquisitions to _bh and rework parts of ALB mode, both
to avoid deadlocks with workqueue activity.
Signed-off-by: NAndy Gospodarek <andy@greyhouse.net>
Signed-off-by: NJay Vosburgh <fubar@us.ibm.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

	Convert mii (link state) monitor to acquire correct locks for
failover events.  In particular, failovers generally require RTNL at a low
level (when manipulating device MAC addresses, for example) and no other
locks.  The high level monitor is responsible for acquiring a known set
of locks, RTNL, the bond->lock for read and the slave_lock for write, and
the low level failover processing can then release appropriate locks as
needed.  This patch provides the high level portion.

	As it is undesirable to acquire RTNL for every monitor pass (which
may occur as often as every 10 ms), the miimon has been converted to
do conditional locking.  A first pass inspects all slaves to determine
if any action is required, and if so, a second pass (after acquring RTNL)
is done to perform any actions (doing a complete rescan, as the situation
may have changed when all locks were released).
Signed-off-by: NAndy Gospodarek <andy@greyhouse.net>
Signed-off-by: NJay Vosburgh <fubar@us.ibm.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

	Change locking in balance-rr transmit processing to use a free
running counter to determine which slave to transmit on.  Instead, a
free-running counter is maintained, and modulo arithmetic used to select
a slave for transmit.

	This removes lock operations from the TX path, and eliminates
a deadlock introduced by the conversion to work queues.
Signed-off-by: NAndy Gospodarek <andy@greyhouse.net>
Signed-off-by: NJay Vosburgh <fubar@us.ibm.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

	Convert bonding timers to workqueues.  This converts the various
monitor functions to run in periodic work queues instead of timers.  This
patch introduces the framework and convers the calls, but does not resolve
various locking issues, and does not stand alone.
Signed-off-by: NAndy Gospodarek <andy@greyhouse.net>
Signed-off-by: NJay Vosburgh <fubar@us.ibm.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Remove net driver entries (they fall under the more general 'net driver
maintainer') umbrella.

Remove entries for older drivers that either no longer exist, are about
to be removed, or I no longer care about.
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Add missing &:

drivers/net/pasemi_mac.c: In function 'pasemi_mac_clean_rx':
drivers/net/pasemi_mac.c:553: warning: passing argument 1 of 'prefetch'
makes pointer from integer without a cast
Signed-off-by: NOlof Johansson <olof@lixom.net>
Signed-off-by: NJeff Garzik <jeff@garzik.org>