“233f0b95ca3a0d1dcbd70bc7e519069a8e10d23e”上不存在“README.md”
- 04 4月, 2014 1 次提交
-
-
由 Dan Carpenter 提交于
The if condition was accidentally deleted here so we return every time instead of returning on error. Fixes: fd335ab0 ('Input: edt-ft5x06 - add support for M09 firmware version') Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Reviewed-by: NJingoo Han <jg1.han@samsung.com> Acked-By: NLothar Waßmann <LW@KARO-electronics.de> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 31 3月, 2014 10 次提交
-
-
由 Clinton Sprain 提交于
Addresses issues related to when a second finger enters or leaves the field, causing the cursor to jump or the page to scroll unexpectedly; now, we discard any movement change that happens at the exact moment we detect a change in the number of fingers touching the trackpad. This doesn't completely resolve the issue but does greatly mitigate it. Signed-off-by: NClinton Sprain <clintonsprain@gmail.com> Reviewed-by: NHenrik Rydberg <rydberg@euromail.se> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Clinton Sprain 提交于
Use smoothed version of sensor array data to calculate movement and add weight to prior values when calculating average. This gives more granular and more predictable movement. Signed-off-by: NClinton Sprain <clintonsprain@gmail.com> Reviewed-by: NHenrik Rydberg <rydberg@euromail.se> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Lejun Zhu 提交于
This patch adds support for the GPIO buttons on some Intel Bay Trail tablets originally running Windows 8. The ACPI description of these buttons follows "Windows ACPI Design Guide for SoC Platforms". Signed-off-by: NLejun Zhu <lejun.zhu@linux.intel.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Stephen Boyd 提交于
The driver is only supported on DT enabled platforms. Convert the driver to DT so that it can probe properly. Signed-off-by: NStephen Boyd <sboyd@codeaurora.org> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Stephen Boyd 提交于
The driver is only supported on DT enabled platforms. Convert the driver to DT so that it can probe properly. Signed-off-by: NStephen Boyd <sboyd@codeaurora.org> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Stephen Boyd 提交于
The driver is only supported on DT enabled platforms. Convert the driver to DT so that it can probe properly. Signed-off-by: NStephen Boyd <sboyd@codeaurora.org> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Stephen Boyd 提交于
Use the regmap APIs for this driver instead of custom pm8xxx APIs. This breaks this driver's dependency on the pm8xxx APIs and allows us to easily port it to other bus protocols in the future. Signed-off-by: NStephen Boyd <sboyd@codeaurora.org> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Stephen Boyd 提交于
Simplify the error paths and reduce the lines of code in this driver by using the devm_* APIs. Signed-off-by: NStephen Boyd <sboyd@codeaurora.org> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Stephen Boyd 提交于
The gpio configuration in this driver doesn't work because the gpio.h include doesn't exist. Remove the configuration as it isn't strictly necessary, allowing us to actually compile this driver. If it's needed in the future, it should be done via a pinctrl driver. Signed-off-by: NStephen Boyd <sboyd@codeaurora.org> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Alexander Shiyan 提交于
This patch adds a new driver for keypad for Cirrus Logic CLPS711X CPUs. Target CPU contain keyboard interface which can scan 8 column lines, so we can read row GPIOs to read status and determine asserted state. Signed-off-by: NAlexander Shiyan <shc_work@mail.ru> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 29 3月, 2014 5 次提交
-
-
由 Lothar Waßmann 提交于
There is a new firmware version for the EDT-FT5x06 chip. Add support for detecting the firmware version and handle the differences appropriately. Signed-off-by: NLothar Waßmann <LW@KARO-electronics.de> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Lothar Waßmann 提交于
The chip may report invalid coordinates on touchdown events, so don't report the initial touchdown event. Signed-off-by: NLothar Waßmann <LW@KARO-electronics.de> Acked-by: NFugang Duan <B38611@freescale.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Lothar Waßmann 提交于
The FT5x06 datasheet specifies a minimum reset width of 5ms and a delay between deassertion of reset and start of reporting of 300ms. Adjust the delays to conform to the datasheet. With the original delays I sometimes experienced communication timeouts when initializing the controller. Signed-off-by: NLothar Waßmann <LW@KARO-electronics.de> Acked-by: NFugang Duan <B38611@freescale.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Lothar Waßmann 提交于
Signed-off-by: NLothar Waßmann <LW@KARO-electronics.de> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Lothar Waßmann 提交于
- remove redundant parens - remove redundant type casts - fix mixed tab/space indentation Signed-off-by: NLothar Waßmann <LW@KARO-electronics.de> Acked-by: NFugang Duan <B38611@freescale.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 28 3月, 2014 3 次提交
-
-
由 Clinton Sprain 提交于
Let's dial back the default fuzz setting for most devices using this driver, based on values from user feedback from forums and bug reports. Signed-off-by: NClinton Sprain <clintonsprain@gmail.com> Reviewed-by: NHenrik Rydberg <rydberg@euromail.se> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Arnd Bergmann 提交于
The tnetv107x platform is getting removed, so the touchscreen and keypad drivers for this platform will no longer be needed either. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NSekhar Nori <nsekhar@ti.com> Acked-by: NKevin Hilman <khilman@linaro.org> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: linux-input@vger.kernel.org Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Xianglong Du 提交于
commit a1a75210 moved to report EV_KEY event(KEY_POWER) instead of reporting EV_PWR event(KEY_SUSPEND), but it didn't enable the capability, so the KEY_POWER will not be reported to userspace by input core. this patch fixes the issue. Signed-off-by: NXianglong Du <Xianglong.Du@csr.com> Signed-off-by: NBarry Song <Baohua.Song@csr.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 27 3月, 2014 1 次提交
-
-
由 Anthony Olech 提交于
The wrong register bit of the DA9052/3 PMIC registers was used to determine the status on the ONKEY. Also a failure in reading the status register will no longer result in the work queue being rescheduled as that would result in a (potentially) endless retry. Signed-off-by: NAnthony Olech <anthony.olech.opensource@diasemi.com> Acked-by: NDavid Dajun Chen <david.chen@diasemi.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 24 3月, 2014 3 次提交
-
-
由 Jean Delvare 提交于
Kconfig symbol X86_32 was introduced in October 2005, it's about time to use it. This clears the last occurrence of the legacy "X86 && !X86_64" construct :-) Signed-off-by: NJean Delvare <jdelvare@suse.de> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Jean Delvare 提交于
I don't think the OLPC AP-SP driver is generally useful without OLPC support. So make it depend on OLPC, unless build testing is enabled. Signed-off-by: NJean Delvare <jdelvare@suse.de> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Thomas Gleixner 提交于
Make sure that no callback is running before we teardown the module. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 18 2月, 2014 1 次提交
-
-
由 Fabio Estevam 提交于
No need to return a 'fake' return value on platform_get_irq() failure. Just return the error code itself instead. Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 16 2月, 2014 6 次提交
-
-
由 Barry Song 提交于
Happy the year of horse, 2014. ,((((^`\ (((( (6 \ ,((((( , \ ,,,_ ,((((( /"._ ,`, ((((\\ ,... ,(((( / `-.-' ))) ;' `"'"'""(((( ( ((( / ((( \ )) | | (( | . ' | )) \ _ ' `t ,.') ( | y;- -,-""'"-.\ \/ ) / ./ ) / `\ \ |./ ( ( / /' || \\ //'| || \\ _//'|| || )) |_/ || \_\ |_/ || `'" \_\ `'" Signed-off-by: NBarry Song <Baohua.Song@csr.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Xianglong Du 提交于
This change adds a delayed_work to detect the release of onkey since HW will not generate interrupt for it. At the same time, we move the KEY event to POWER instead of SUSPEND, which will be suitable for both Android and Linux. Userspace PowerManager Daemon will decide to suspend or shutdown based on how long we have touched onkey. Signed-off-by: NXianglong Du <Xianglong.Du@csr.com> Signed-off-by: NRongjun Ying <Rongjun.Ying@csr.com> Signed-off-by: NBarry Song <Baohua.Song@csr.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Xianglong Du 提交于
In resume entry, use dev_get_drvdata() instead of to_platform_device(dev) + platform_get_drvdata(pdev). Signed-off-by: NXianglong Du <Xianglong.Du@csr.com> Signed-off-by: NBarry Song <Baohua.Song@csr.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Xianglong Du 提交于
This function lost namespace, this patch fixes it. Signed-off-by: NXianglong Du <Xianglong.Du@csr.com> Signed-off-by: NBarry Song <Baohua.Song@csr.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Barry Song 提交于
Since the IRQ handler always returns IRQ_HANDLED it means this irq is not a shared IRQ at all. Or at least, the SW is not self-consistent now. Signed-off-by: NBarry Song <Baohua.Song@csr.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Dmitry Torokhov 提交于
We can control whetehr device generates interrupts or not so let's implement open and close methods of input device so that we do not do any processing until there are users. Tested-by: NXianglong Du <Xianglong.Du@csr.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 13 2月, 2014 3 次提交
-
-
由 Andrey Smirnov 提交于
New version of the PCU firmware supports two new commands: - IMS_PCU_CMD_OFN_SET_CONFIG which allows to write data to the registers of one finger navigation(OFN) chip present on the device - IMS_PCU_CMD_OFN_GET_CONFIG which allows to read data form the registers of said chip. This commit adds two helper functions to use those commands and sysfs attributes to use them. It also exposes some OFN configuration parameters via sysfs. Signed-off-by: NAndrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Dmitry Torokhov 提交于
We first create backlight and then input devices so we should destroy them in opposite order when handling errors. Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Benjamin Tissoires 提交于
uinput is used in the xorg-integration-tests suite and in the wayland test suite. These automated tests suites create many virtual input devices and then hook something to read these newly created devices. Currently, uinput does not provide the created input device, which means that we rely on an heuristic to guess which input node was created. The problem is that is heuristic is subjected to races between different uinput devices or even with physical devices. Having a way to retrieve the sysfs path allows us to find without any doubts the event node. Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: NDavid Herrmann <dh.herrmann@gmail.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 31 1月, 2014 1 次提交
-
-
由 Benjamin Tisssoires 提交于
The current implementation prevents us to add variable-length ioctl. Use a bunch of gotos instead of break to allow us to do so. No functional changes. Signed-off-by: NBenjamin Tisssoires <benjamin.tissoires@redhat.com> Reviewed-by: NDavid Herrmann <dh.herrmann@gmail.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 28 1月, 2014 6 次提交
-
-
由 Heiko Stübner 提交于
This makes the zforce driver usable on devicetree-based platforms too. Signed-off-by: NHeiko Stuebner <heiko.stuebner@bqreaders.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Heiko Stübner 提交于
Devicetree support will be creating its own platfprm data structure that is not attached to the device. Let's use the internal pointer to the pdata instead of re-fetching it with dev_get_platdata(). Signed-off-by: NHeiko Stuebner <heiko.stuebner@bqreaders.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Luis Ortega 提交于
A frame is a u8 array with the following structure: [PAYLOAD_HEADER, PAYLOAD_LENGTH, ...PAYLOAD_BODY...] PAYLOAD_BODY can be at most 255 bytes long, as it's size is represented by PAYLOAD_LENGTH. Therefore we can reduce the stack memory allocated to payload_buffer[] roughly by half, from 512 to 257 bytes. Signed-off-by: NLuis Ortega <luiorpe1@upv.es> Acked-by: NHeiko Stuebner <heiko@sntech.de> Tested-by: Heiko Stuebner <heiko@sntech.de> - bq Cervantes (imx6sl) Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Luis Ortega 提交于
The function zforce_read_packet() reads 2 values (bytes) of payload header, validates them and then proceeds to read the payload body. The function stores all these in a u8 buffer. The PAYLOAD_LENGTH check seems to be trying to detect an overflow error. However, since we are just reading a u8 value from the buffer, these checks are unnecessary and we should simply compare against zero. Signed-off-by: NLuis Ortega <luiorpe1@upv.es> Acked-by: NHeiko Stuebner <heiko@sntech.de> Tested-by: Heiko Stuebner <heiko@sntech.de> - bq Cervantes (imx6sl) Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Luis Ortega 提交于
Fixed lines exceeding 80 characters long wherever possible, as per the coding style. Signed-off-by: NLuis Ortega <luiorpe1@upv.es> Acked-by: NHeiko Stuebner <heiko@sntech.de> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Luis Ortega 提交于
Fixed a few spelling errors. Signed-off-by: NLuis Ortega <luiorpe1@upv.es> Acked-by: NHeiko Stuebner <heiko@sntech.de> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-