Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
接近 2 年 前同步成功

通知 170
Star 36
Fork 7
cloud-kernel
cloud-kernel
切换分支/标签
  1. 07 4月, 2017 1 次提交
  3. 03 1月, 2017 1 次提交
  5. 18 10月, 2016 1 次提交
  7. 05 5月, 2016 1 次提交
  9. 21 11月, 2015 3 次提交
  11. 17 11月, 2015 1 次提交
    • O
      dl2k: Add support for IP1000A-based cards · c3f45d32
      由 Ondrej Zary 提交于 
      Add support for IP1000A chips to dl2k driver.
IP1000A chip looks like a TC9020 with integrated PHY.

This allows IP1000A chips to work reliably because the ipg driver is
buggy - it loses packets under load and then completely stops
transmitting data.

Tested with Asus NX1101 v2.0 at 10, 100 and 1000Mbps:
vendor=0x13f0 device=0x1023 (rev 0x41)
subsystem vendor=0x1043 device=0x8180

MAC address registers access needed to be changed from 8-bit to 16-bit
because 8-bit does not work on IP1000A. 8-bit access is not even
allowed in the TC9020 datasheet (although it worked). 16-bit access
works on both.

Tested that it does not break D-Link DGE-550T (DL-2000 chip, probably
a rebranded TC9020):
vendor=0x1186 device=0x4000 (rev 0x0c)
subsystem vendor=0x1186 device=0x4000
Signed-off-by: NOndrej Zary <linux@rainbow-software.org>
Reviewed-by: NAndy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      c3f45d32
  13. 01 6月, 2015 1 次提交
    • V
      net: dl2k: Use setup_timer · 52e0b2b1
      由 Vaishali Thakkar 提交于 
      Use the timer API function setup_timer instead of structure field
assignments to initialize a timer.

A simplified version of the Coccinelle semantic patch that performs
this transformation is as follows:

@change@
expression e1, e2, e3, e4, a, b;
@@

-init_timer(&e1);
+setup_timer(&e1, a, b);

... when != a = e2
    when != b = e3

-e1.data = b;
... when != a = e4
-e1.function = a;
Signed-off-by: NVaishali Thakkar <vthakkar1994@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      52e0b2b1
  15. 07 6月, 2014 1 次提交
  17. 14 5月, 2014 1 次提交
  19. 22 10月, 2013 1 次提交
  21. 10 3月, 2013 1 次提交
  23. 07 1月, 2013 1 次提交
  25. 04 12月, 2012 1 次提交
  27. 01 11月, 2012 1 次提交
  29. 26 4月, 2012 1 次提交
    • J
      dl2k: Clean up rio_ioctl · 1bb57e94
      由 Jeff Mahoney 提交于 
      The dl2k driver's rio_ioctl call has a few issues:
- No permissions checking
- Implements SIOCGMIIREG and SIOCGMIIREG using the SIOCDEVPRIVATE numbers
- Has a few ioctls that may have been used for debugging at one point
  but have no place in the kernel proper.

This patch removes all but the MII ioctls, renumbers them to use the
standard ones, and adds the proper permission check for SIOCSMIIREG.

We can also get rid of the dl2k-specific struct mii_data in favor of
the generic struct mii_ioctl_data.

Since we have the phyid on hand, we can add the SIOCGMIIPHY ioctl too.

Most of the MII code for the driver could probably be converted to use
the generic MII library but I don't have a device to test the results.
Reported-by: NStephan Mueller <stephan.mueller@atsec.com>
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      1bb57e94
  31. 07 4月, 2012 1 次提交
  33. 25 8月, 2011 1 次提交
  35. 18 8月, 2011 1 次提交
  37. 12 8月, 2011 1 次提交
  39. 22 6月, 2011 1 次提交
  41. 12 6月, 2011 1 次提交
  43. 30 4月, 2011 2 次提交
  45. 28 1月, 2011 1 次提交
  47. 26 8月, 2010 1 次提交
  49. 14 5月, 2010 1 次提交
    • J
      drivers/net: Remove unnecessary returns from void function()s · a4b77097
      由 Joe Perches 提交于 
      This patch removes from drivers/net/ all the unnecessary
return; statements that precede the last closing brace of
void functions.

It does not remove the returns that are immediately
preceded by a label as gcc doesn't like that.

It also does not remove null void functions with return.

Done via:
$ grep -rP --include=*.[ch] -l "return;\n}" net/ | \
  xargs perl -i -e 'local $/ ; while (<>) { s/\n[ \t\n]+return;\n}/\n}/g; print; }'

with some cleanups by hand.

Compile tested x86 allmodconfig only.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      a4b77097
  51. 04 4月, 2010 1 次提交
    • J
      net: convert multicast list to list_head · 22bedad3
      由 Jiri Pirko 提交于 
      Converts the list and the core manipulating with it to be the same as uc_list.

+uses two functions for adding/removing mc address (normal and "global"
 variant) instead of a function parameter.
+removes dev_mcast.c completely.
+exposes netdev_hw_addr_list_* macros along with __hw_addr_* functions for
 manipulation with lists on a sandbox (used in bonding and 80211 drivers)
Signed-off-by: NJiri Pirko <jpirko@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      22bedad3
  53. 18 2月, 2010 1 次提交
  55. 13 2月, 2010 1 次提交
  57. 04 12月, 2009 1 次提交
  59. 19 11月, 2009 1 次提交
  61. 14 10月, 2009 1 次提交
  63. 01 9月, 2009 1 次提交
  65. 09 7月, 2009 1 次提交
  67. 29 5月, 2009 1 次提交
  69. 07 4月, 2009 1 次提交
  71. 22 11月, 2008 1 次提交
  73. 04 11月, 2008 1 次提交