Changing the way we retrieve the event ID. Instead of parsing out
the ID out of the read data, using the PERF_EVENT_IOC_ID ioctl.

Keeping the old way in place to support kernels without
PERF_EVENT_IOC_ID ioctl support.

This will be useful for retrieving the event ID for events
with PERF_FORMAT_GROUP read format set, where it's impossible
to get correct event id out of the read call data.
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
Acked-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-psgb4n7kte8e6tfenbe7nj2h@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

It's possible some of the counters in the group could be
disabled when sampling member of the event group is reading
the rest via PERF_SAMPLE_READ sample type processing. Disabled
counters could then produce wrong numbers.

Fixing that by reading only enabled counters for PERF_SAMPLE_READ
sample type processing.
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
Acked-by: NNamhyung Kim <namhyung@kernel.org>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-wwkjb0bbcuslnz0klrmqi26r@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The only way to get the event ID is by reading the event fd,
followed by parsing the ID value out of the returned data.

While this is ok for current read format used by perf tool,
it is not ok when we use PERF_FORMAT_GROUP format.

With this format the data are returned for the whole group
and there's no way to find out what ID belongs to our fd
(if we are not group leader event).

Adding a simple ioctl that returns event primary ID for given fd.
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
Acked-by: NNamhyung Kim <namhyung@kernel.org>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-v1bn5cto707jn0bon34afqr1@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

A perf event can be used without forcing the tick to
stay alive if it doesn't use a frequency but a sample
period and if it doesn't throttle (raise storm of events).

Since the lockup detector neither use a perf event frequency
nor should ever throttle due to its high period, it can now
run concurrently with the full dynticks feature.

So remove the hack that disabled the watchdog.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Cc: Anish Singh <anish198519851985@gmail.com>
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1374539466-4799-9-git-send-email-fweisbec@gmail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Currently the full dynticks subsystem keep the
tick alive as long as there are perf events running.

This prevents the tick from being stopped as long as features
such that the lockup detectors are running. As a temporary fix,
the lockup detector is disabled by default when full dynticks
is built but this is not a long term viable solution.

To fix this, only keep the tick alive when an event configured
with a frequency rather than a period is running on the CPU,
or when an event throttles on the CPU.

These are the only purposes of the perf tick, especially now that
the rotation of flexible events is handled from a seperate hrtimer.
The tick can be shutdown the rest of the time.
Original-patch-by: NPeter Zijlstra <peterz@infradead.org>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1374539466-4799-8-git-send-email-fweisbec@gmail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

This is going to be used by the full dynticks subsystem
as a finer-grained information to know when to keep and
when to stop the tick.
Original-patch-by: NPeter Zijlstra <peterz@infradead.org>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1374539466-4799-7-git-send-email-fweisbec@gmail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

When an event is migrated, move the event per-cpu
accounting accordingly so that branch stack and cgroup
events work correctly on the new CPU.
Original-patch-by: NPeter Zijlstra <peterz@infradead.org>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1374539466-4799-6-git-send-email-fweisbec@gmail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

This way we can use the per-cpu handling seperately.
This is going to be used by to fix the event migration
code accounting.
Original-patch-by: NPeter Zijlstra <peterz@infradead.org>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1374539466-4799-5-git-send-email-fweisbec@gmail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Gather all the event accounting code to a single place,
once all the prerequisites are completed. This simplifies
the refcounting.
Original-patch-by: NPeter Zijlstra <peterz@infradead.org>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1374539466-4799-4-git-send-email-fweisbec@gmail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

In case of allocation failure, get_callchain_buffer() keeps the
refcount incremented for the current event.

As a result, when get_callchain_buffers() returns an error,
we must cleanup what it did by cancelling its last refcount
with a call to put_callchain_buffers().

This is a hack in order to be able to call free_event()
after that failure.

The original purpose of that was to simplify the failure
path. But this error handling is actually counter intuitive,
ugly and not very easy to follow because one expect to
see the resources used to perform a service to be cleaned
by the callee if case of failure, not by the caller.

So lets clean this up by cancelling the refcount from
get_callchain_buffer() in case of failure. And correctly free
the event accordingly in perf_event_alloc().
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1374539466-4799-3-git-send-email-fweisbec@gmail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

On callchain buffers allocation failure, free_event() is
called and all the accounting performed in perf_event_alloc()
for that event is cancelled.

But if the event has branch stack sampling, it is unaccounted
as well from the branch stack sampling events refcounts.

This is a bug because this accounting is performed after the
callchain buffer allocation. As a result, the branch stack sampling
events refcount can become negative.

To fix this, move the branch stack event accounting before the
callchain buffer allocation.
Reported-by: NPeter Zijlstra <peterz@infradead.org>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1374539466-4799-2-git-send-email-fweisbec@gmail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Smart wake-affine is using node-size as the factor currently, but the overhead
of the mask operation is high.

Thus, this patch introduce the 'sd_llc_size' percpu variable, which will record
the highest cache-share domain size, and make it to be the new factor, in order
to reduce the overhead and make it more reasonable.
Tested-by: NDavidlohr Bueso <davidlohr.bueso@hp.com>
Tested-by: NMichael Wang <wangyun@linux.vnet.ibm.com>
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Acked-by: NMichael Wang <wangyun@linux.vnet.ibm.com>
Cc: Mike Galbraith <efault@gmx.de>
Link: http://lkml.kernel.org/r/51D5008E.6030102@linux.vnet.ibm.com
[ Tidied up the changelog. ]
Signed-off-by: NIngo Molnar <mingo@kernel.org>

The wake-affine scheduler feature is currently always trying to pull
the wakee close to the waker. In theory this should be beneficial if
the waker's CPU caches hot data for the wakee, and it's also beneficial
in the extreme ping-pong high context switch rate case.

Testing shows it can benefit hackbench up to 15%.

However, the feature is somewhat blind, from which some workloads
such as pgbench suffer. It's also time-consuming algorithmically.

Testing shows it can damage pgbench up to 50% - far more than the
benefit it brings in the best case.

So wake-affine should be smarter and it should realize when to
stop its thankless effort at trying to find a suitable CPU to wake on.

This patch introduces 'wakee_flips', which will be increased each
time the task flips (switches) its wakee target.

So a high 'wakee_flips' value means the task has more than one
wakee, and the bigger the number, the higher the wakeup frequency.

Now when making the decision on whether to pull or not, pay attention to
the wakee with a high 'wakee_flips', pulling such a task may benefit
the wakee. Also imply that the waker will face cruel competition later,
it could be very cruel or very fast depends on the story behind
'wakee_flips', waker therefore suffers.

Furthermore, if waker also has a high 'wakee_flips', that implies that
multiple tasks rely on it, then waker's higher latency will damage all
of them, so pulling wakee seems to be a bad deal.

Thus, when 'waker->wakee_flips / wakee->wakee_flips' becomes
higher and higher, the cost of pulling seems to be worse and worse.

The patch therefore helps the wake-affine feature to stop its pulling
work when:

	wakee->wakee_flips > factor &&
	waker->wakee_flips > (factor * wakee->wakee_flips)

The 'factor' here is the number of CPUs in the current CPU's NUMA node,
so a bigger node will lead to more pulling since the trial becomes more
severe.

After applying the patch, pgbench shows up to 40% improvements and no regressions.

Tested with 12 cpu x86 server and tip 3.10.0-rc7.

The percentages in the final column highlight the areas with the biggest wins,
all other areas improved as well:

	pgbench		    base	smart

	| db_size | clients |  tps  |	|  tps  |
	+---------+---------+-------+   +-------+
	| 22 MB   |       1 | 10598 |   | 10796 |
	| 22 MB   |       2 | 21257 |   | 21336 |
	| 22 MB   |       4 | 41386 |   | 41622 |
	| 22 MB   |       8 | 51253 |   | 57932 |
	| 22 MB   |      12 | 48570 |   | 54000 |
	| 22 MB   |      16 | 46748 |   | 55982 | +19.75%
	| 22 MB   |      24 | 44346 |   | 55847 | +25.93%
	| 22 MB   |      32 | 43460 |   | 54614 | +25.66%
	| 7484 MB |       1 |  8951 |   |  9193 |
	| 7484 MB |       2 | 19233 |   | 19240 |
	| 7484 MB |       4 | 37239 |   | 37302 |
	| 7484 MB |       8 | 46087 |   | 50018 |
	| 7484 MB |      12 | 42054 |   | 48763 |
	| 7484 MB |      16 | 40765 |   | 51633 | +26.66%
	| 7484 MB |      24 | 37651 |   | 52377 | +39.11%
	| 7484 MB |      32 | 37056 |   | 51108 | +37.92%
	| 15 GB   |       1 |  8845 |   |  9104 |
	| 15 GB   |       2 | 19094 |   | 19162 |
	| 15 GB   |       4 | 36979 |   | 36983 |
	| 15 GB   |       8 | 46087 |   | 49977 |
	| 15 GB   |      12 | 41901 |   | 48591 |
	| 15 GB   |      16 | 40147 |   | 50651 | +26.16%
	| 15 GB   |      24 | 37250 |   | 52365 | +40.58%
	| 15 GB   |      32 | 36470 |   | 50015 | +37.14%
Signed-off-by: NMichael Wang <wangyun@linux.vnet.ibm.com>
Cc: Mike Galbraith <efault@gmx.de>
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/51D50057.9000809@linux.vnet.ibm.com
[ Improved the changelog. ]
Signed-off-by: NIngo Molnar <mingo@kernel.org>

The bad thing about update_h_load(), which computes hierarchical load
factor for task groups, is that it is called for each task group in the
system before every load balancer run, and since rebalance can be
triggered very often, this function can eat really a lot of cpu time if
there are many cpu cgroups in the system.

Although the situation was improved significantly by commit a35b6466
('sched, cgroup: Reduce rq->lock hold times for large cgroup
hierarchies'), the problem still can arise under some kinds of loads,
e.g. when cpus are switching from idle to busy and back very frequently.

For instance, when I start 1000 of processes that wake up every
millisecond on my 8 cpus host, 'top' and 'perf top' show:

Cpu(s): 17.8%us, 24.3%sy,  0.0%ni, 57.9%id,  0.0%wa,  0.0%hi,  0.0%si
Events: 243K cycles
  7.57%  [kernel]               [k] __schedule
  7.08%  [kernel]               [k] timerqueue_add
  6.13%  libc-2.12.so           [.] usleep

Then if I create 10000 *idle* cpu cgroups (no processes in them), cpu
usage increases significantly although the 'wakers' are still executing
in the root cpu cgroup:

Cpu(s): 19.1%us, 48.7%sy,  0.0%ni, 31.6%id,  0.0%wa,  0.0%hi,  0.7%si
Events: 230K cycles
 24.56%  [kernel]            [k] tg_load_down
  5.76%  [kernel]            [k] __schedule

This happens because this particular kind of load triggers 'new idle'
rebalance very frequently, which requires calling update_h_load(),
which, in turn, calls tg_load_down() for every *idle* cpu cgroup even
though it is absolutely useless, because idle cpu cgroups have no tasks
to pull.

This patch tries to improve the situation by making h_load calculation
proceed only when h_load is really necessary. To achieve this, it
substitutes update_h_load() with update_cfs_rq_h_load(), which computes
h_load only for a given cfs_rq and all its ascendants, and makes the
load balancer call this function whenever it considers if a task should
be pulled, i.e. it moves h_load calculations directly to task_h_load().
For h_load of the same cfs_rq not to be updated multiple times (in case
several tasks in the same cgroup are considered during the same balance
run), the patch keeps the time of the last h_load update for each cfs_rq
and breaks calculation when it finds h_load to be uptodate.

The benefit of it is that h_load is computed only for those cfs_rq's,
which really need it, in particular all idle task groups are skipped.
Although this, in fact, moves h_load calculation under rq lock, it
should not affect latency much, because the amount of work done under rq
lock while trying to pull tasks is limited by sched_nr_migrate.

After the patch applied with the setup described above (1000 wakers in
the root cgroup and 10000 idle cgroups), I get:

Cpu(s): 16.9%us, 24.8%sy,  0.0%ni, 58.4%id,  0.0%wa,  0.0%hi,  0.0%si
Events: 242K cycles
  7.57%  [kernel]                  [k] __schedule
  6.70%  [kernel]                  [k] timerqueue_add
  5.93%  libc-2.12.so              [.] usleep
Signed-off-by: NVladimir Davydov <vdavydov@parallels.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1373896159-1278-1-git-send-email-vdavydov@parallels.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

The test uses the newly added cap_usr_time_zero and time_zero of
perf_event_mmap_page.  TSC from rdtsc is compared with the time
from 2 perf events.  The test passes if the calculated times are
all in the correct order.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1372425741-1676-4-git-send-email-adrian.hunter@intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

For modern CPUs, perf clock is directly related to TSC.  TSC
can be calculated from perf clock and vice versa using a simple
calculation.  Two of the three componenets of that calculation
are already exported in struct perf_event_mmap_page.  This patch
exports the third.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: http://lkml.kernel.org/r/1372425741-1676-3-git-send-email-adrian.hunter@intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

The capabilities bits must not be "union'ed" together.
Put them in a separate struct.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1372425741-1676-2-git-send-email-adrian.hunter@intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Due to a discussion with Adrian I had a good look at the perf_event_type record
layout and found the documentation to be somewhat unclear.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20130716150907.GL23818@dyad.programming.kicks-ass.netSigned-off-by: NIngo Molnar <mingo@kernel.org>

In fd4363ff ("x86: Introduce int3 (breakpoint)-based
instruction patching"), the mechanism that was introduced for
notifying alternatives code from int3 exception handler that and
exception occured was die_notifier.

This is however problematic, as early code might be using jump
labels even before the notifier registration has been performed,
which will then lead to an oops due to unhandled exception. One
of such occurences has been encountered by Fengguang:

 int3: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
 Modules linked in:
 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.11.0-rc1-01429-g04bf576 #8
 task: ffff88000da1b040 ti: ffff88000da1c000 task.ti: ffff88000da1c000
 RIP: 0010:[<ffffffff811098cc>]  [<ffffffff811098cc>] ttwu_do_wakeup+0x28/0x225
 RSP: 0000:ffff88000dd03f10  EFLAGS: 00000006
 RAX: 0000000000000000 RBX: ffff88000dd12940 RCX: ffffffff81769c40
 RDX: 0000000000000002 RSI: 0000000000000000 RDI: 0000000000000001
 RBP: ffff88000dd03f28 R08: ffffffff8176a8c0 R09: 0000000000000002
 R10: ffffffff810ff484 R11: ffff88000dd129e8 R12: ffff88000dbc90c0
 R13: ffff88000dbc90c0 R14: ffff88000da1dfd8 R15: ffff88000da1dfd8
 FS:  0000000000000000(0000) GS:ffff88000dd00000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
 CR2: 00000000ffffffff CR3: 0000000001c88000 CR4: 00000000000006e0
 Stack:
  ffff88000dd12940 ffff88000dbc90c0 ffff88000da1dfd8 ffff88000dd03f48
  ffffffff81109e2b ffff88000dd12940 0000000000000000 ffff88000dd03f68
  ffffffff81109e9e 0000000000000000 0000000000012940 ffff88000dd03f98
 Call Trace:
  <IRQ>
  [<ffffffff81109e2b>] ttwu_do_activate.constprop.56+0x6d/0x79
  [<ffffffff81109e9e>] sched_ttwu_pending+0x67/0x84
  [<ffffffff8110c845>] scheduler_ipi+0x15a/0x2b0
  [<ffffffff8104dfb4>] smp_reschedule_interrupt+0x38/0x41
  [<ffffffff8173bf5d>] reschedule_interrupt+0x6d/0x80
  <EOI>
  [<ffffffff810ff484>] ? __atomic_notifier_call_chain+0x5/0xc1
  [<ffffffff8105cc30>] ? native_safe_halt+0xd/0x16
  [<ffffffff81015f10>] default_idle+0x147/0x282
  [<ffffffff81017026>] arch_cpu_idle+0x3d/0x5d
  [<ffffffff81127d6a>] cpu_idle_loop+0x46d/0x5db
  [<ffffffff81127f5c>] cpu_startup_entry+0x84/0x84
  [<ffffffff8104f4f8>] start_secondary+0x3c8/0x3d5
  [...]

Fix this by directly calling poke_int3_handler() from the int3
exception handler (analogically to what ftrace has been doing
already), instead of relying on notifier, registration of which
might not have yet been finalized by the time of the first trap.
Reported-and-tested-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
Acked-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/alpine.LNX.2.00.1307231007490.14024@pobox.suse.czSigned-off-by: NIngo Molnar <mingo@kernel.org>

Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core

Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:

  * Fix memcpy benchmark for large sizes, from Andi Kleen.

  * Support callchain sorting based on addresses, from Andi Kleen

  * Move weight back to common sort keys, From Andi Kleen.

  * Fix named threads support in 'perf script', from David Ahern.

  * Handle ENODEV on default cycles event, fix from David Ahern.

  * More install tests, from Jiri Olsa.

  * Fix build with perl 5.18, from Kirill A. Shutemov.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

This is a partial revert of Namhyung's patch

 afab87b9
 perf sort: Separate out memory-specific sort keys

He wrote

 For global/local weights, I'm not entirely sure to place them into the
 memory dimension.  But it's the only user at this time.

Well TSX is another (in fact the original) user of the flags, and it
needs them to be common. So move local/global weight back to the common
sort keys.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Link: http://lkml.kernel.org/r/1374188333-17899-1-git-send-email-andi@firstfloor.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Adding install-* tests into tests/make. Those tests are
broken, so commenting them out right away.

* Nothing get installed for install-man, install_doc and
  install_html targets, they just rebuild the documentation.

* I've got following error for 'install-info':

  $ make -f tests/make make_install_info
  - make_install_info: cd . && make -f Makefile DESTDIR=/tmp/tmp.Xi4mb9J1a0 install-info

  $ tail -f make_install_info
  ...
  PERF_VERSION = 3.11.rc1.g9b3c2d
  make[2]: *** No rule to make target `user-manual.xml', needed by `user-manual.texi'.  Stop.
  make[1]: *** [install-info] Error 2

* I've got following error for 'install-pdf':

  $ make -f tests/make make_install_pdf
  - make_install_pdf: cd . && make -f Makefile DESTDIR=/tmp/tmp.fXseECBbt1 install-pdf

  $ tail -f make_install_pdf
  ...
  PERF_VERSION = 3.11.rc1.g9b3c2d
  make[2]: *** No rule to make target `user-manual.xml', needed by `user-manual.pdf'.  Stop.
  make[1]: *** [install-pdf] Error 2
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1374497014-2817-6-git-send-email-jolsa@redhat.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Adding 'make install' and 'make install-bin' tests into tests/make. It's
run as part of the suite, but could be run separately like:

  $ make -f tests/make make_install
  - make_install: cd . && make -f Makefile DESTDIR=/tmp/tmp.LpkYbk5pfs install
    test: test -x /tmp/tmp.LpkYbk5pfs/bin/perf
  $ make -f tests/make make_install_bin
  - make_install_bin: cd . && make -f Makefile DESTDIR=/tmp/tmp.dMxePBMcFT
    install-bin
    test: test -x /tmp/tmp.dMxePBMcFT/bin/perf
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1374497014-2817-5-git-send-email-jolsa@redhat.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Adding TMP_DEST tests/make variable to provide the DESTDIR directory for
installation tests.

Adding this to existing test targets, since DESTDIR variable 'should
not' affect other than install* targets. We can always separate this if
there's a need for DESTDIR-free build test.
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1374497014-2817-4-git-send-email-jolsa@redhat.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Renaming TMP to TMP_O tests/make variable to make a name space for other
temp variables.
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1374497014-2817-3-git-send-email-jolsa@redhat.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Running tags and cscope make tests only if the 'ctags' and 'cscope'
binaries are installed, so we don't have false alarm test failures.
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1374497014-2817-2-git-send-email-jolsa@redhat.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

perl.h from new Perl release doesn't like -Wundef and -Wswitch-default:

/usr/lib/perl5/core_perl/CORE/perl.h:548:5: error: "SILENT_NO_TAINT_SUPPORT" is not defined [-Werror=undef]
 #if SILENT_NO_TAINT_SUPPORT && !defined(NO_TAINT_SUPPORT)
     ^
/usr/lib/perl5/core_perl/CORE/perl.h:556:5: error: "NO_TAINT_SUPPORT" is not defined [-Werror=undef]
 #if NO_TAINT_SUPPORT
     ^
In file included from /usr/lib/perl5/core_perl/CORE/perl.h:3471:0,
                 from util/scripting-engines/trace-event-perl.c:30:
/usr/lib/perl5/core_perl/CORE/sv.h:1455:5: error: "NO_TAINT_SUPPORT" is not defined [-Werror=undef]
 #if NO_TAINT_SUPPORT
     ^
In file included from /usr/lib/perl5/core_perl/CORE/perl.h:3472:0,
                 from util/scripting-engines/trace-event-perl.c:30:
/usr/lib/perl5/core_perl/CORE/regexp.h:436:5: error: "NO_TAINT_SUPPORT" is not defined [-Werror=undef]
 #if NO_TAINT_SUPPORT
     ^
In file included from /usr/lib/perl5/core_perl/CORE/hv.h:592:0,
                 from /usr/lib/perl5/core_perl/CORE/perl.h:3480,
                 from util/scripting-engines/trace-event-perl.c:30:
/usr/lib/perl5/core_perl/CORE/hv_func.h: In function ‘S_perl_hash_siphash_2_4’:
/usr/lib/perl5/core_perl/CORE/hv_func.h:222:3: error: switch missing default case [-Werror=switch-default]
   switch( left )
   ^
/usr/lib/perl5/core_perl/CORE/hv_func.h: In function ‘S_perl_hash_superfast’:
/usr/lib/perl5/core_perl/CORE/hv_func.h:274:5: error: switch missing default case [-Werror=switch-default]
     switch (rem) { \
     ^
/usr/lib/perl5/core_perl/CORE/hv_func.h: In function ‘S_perl_hash_murmur3’:
/usr/lib/perl5/core_perl/CORE/hv_func.h:398:5: error: switch missing default case [-Werror=switch-default]
     switch(bytes_in_carry) { /* how many bytes in carry */
     ^

Let's disable the warnings for code which uses perl.h.
Signed-off-by: NKirill A. Shutemov <kirill@shutemov.name>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1372063394-20126-1-git-send-email-kirill@shutemov.nameSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

With programs with very large functions it can be useful to distinguish
the callgraph nodes on more than just function names. So for example if
you have multiple calls to the same function, it ends up being separate
nodes in the chain.

This patch adds a new key field to the callgraph options, that allows
comparing nodes on functions (as today, default) and addresses.

Longer term it would be nice to also handle src lines, but that would
need more changes and address is a reasonable proxy for it today.

I right now reference the global params, as there was no simple way to
register a params pointer.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/n/tip-0uskktybf0e7wrnoi5e9b9it@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The glibc calloc() function has an optimization to not explicitely
memset() very large calloc allocations that just came from mmap(),
because they are known to be zero.

This could result in the perf memcpy benchmark reading only from
the zero page, which gives unrealistic results.

Always call memset explicitly on the source area to avoid this problem.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Cc: Hitoshi Mitake <h.mitake@gmail.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Link: http://lkml.kernel.org/n/tip-pzz2qrdq9eymxda0y8yxdn33@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Some systems (e.g., VMs on qemu-0.13 with the default vcpu model) report
an unsupported CPU model:

Performance Events: unsupported p6 CPU model 2 no PMU driver, software events only.

Subsequent invocations of perf fail with:

The sys_perf_event_open() syscall returned with 19 (No such device) for event (cycles).
/bin/dmesg may provide additional information.
No CONFIG_PERF_EVENTS=y kernel support configured?

Add ENODEV to the list of errno's to fallback to cpu-clock.
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1374190079-28507-1-git-send-email-dsahern@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Commit 73994dc1 broke named thread support in perf-script. The thread
struct in al is the main thread for a multithreaded process. The thread
struct used for analysis (e.g., dumping events) should be the specific
thread for the sample.
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Cc: Feng Tang <feng.tang@intel.com>
Link: http://lkml.kernel.org/r/1374185175-28272-1-git-send-email-dsahern@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Since introducing the text_poke_bp() for all text_poke_smp*()
callers, text_poke_smp*() are now unused. This patch basically
reverts:

  3d55cc8a ("x86: Add text_poke_smp for SMP cross modifying code")
  7deb18dc ("x86: Introduce text_poke_smp_batch() for batch-code modifying")

and related commits.

This patch also fixes a Kconfig dependency issue on STOP_MACHINE
in the case of CONFIG_SMP && !CONFIG_MODULE_UNLOAD.
Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Reviewed-by: NJiri Kosina <jkosina@suse.cz>
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jason Baron <jbaron@akamai.com>
Cc: yrl.pp-manager.tt@hitachi.com
Cc: Borislav Petkov <bpetkov@suse.de>
Link: http://lkml.kernel.org/r/20130718114753.26675.18714.stgit@mhiramat-M0-7522Signed-off-by: NIngo Molnar <mingo@kernel.org>

Use text_poke_bp() for optimizing kprobes instead of
text_poke_smp*(). Since the number of kprobes is usually not so
large (<100) and text_poke_bp() is much lighter than
text_poke_smp() [which uses stop_machine()], this just stops
using batch processing.
Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Reviewed-by: NJiri Kosina <jkosina@suse.cz>
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jason Baron <jbaron@akamai.com>
Cc: yrl.pp-manager.tt@hitachi.com
Cc: Borislav Petkov <bpetkov@suse.de>
Link: http://lkml.kernel.org/r/20130718114750.26675.9174.stgit@mhiramat-M0-7522Signed-off-by: NIngo Molnar <mingo@kernel.org>

Remove a comment about an int3 issue in NMI/MCE, since
commit:

  3f3c8b8c ("x86: Add workaround to NMI iret woes")

already fixed that. Keeping this incorrect comment can mislead developers.
Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Reviewed-by: NJiri Kosina <jkosina@suse.cz>
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jason Baron <jbaron@akamai.com>
Cc: yrl.pp-manager.tt@hitachi.com
Cc: Borislav Petkov <bpetkov@suse.de>
Link: http://lkml.kernel.org/r/20130718114747.26675.84110.stgit@mhiramat-M0-7522Signed-off-by: NIngo Molnar <mingo@kernel.org>

Upcoming kprobes patches rely on the int3 code-patching machinery introduced by:

   fd4363ff x86: Introduce int3 (breakpoint)-based instruction patching
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core

Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:

 * Add missing 'finished_round' event forwarding in 'perf inject', from Adrian Hunter.

 * Assorted tidy ups, from Adrian Hunter.

 * Fall back to sysfs event names when parsing fails, from Andi Kleen.

 * List pmu events in perf list, from Andi Kleen.

 * Cleanup some memory allocation/freeing uses, from David Ahern.

 * Add option to collapse undesired parts of call graph, from Greg Price.

 * Prep work for multi perf data file storage, from Jiri Olsa.

 * Add support for more than two files comparision in 'perf diff', from Jiri Olsa

 * A few more 'perf test' improvements, from Jiri Olsa

 * libtraceevent cleanups, from Namhyung Kim.

 * Remove odd build stall in 'perf sched' by moving a large struct initialization
   from a local variable to a global one, from Namhyung Kim.

 * Add support for callchains in the gtk UI, from Namhyung Kim.

 * Do not apply symfs for an absolute vmlinux path, fix from Namhyung Kim.

 * Use default include path notation for libtraceevent, from Robert Richter.

 * Fix 'make tools/perf', from Robert Richter.

 * Make Power7 events available, from Runzhen Wang.

 * Add --objdump option to 'perf top', from Sukadev Bhattiprolu.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Merge in a v3.11-rc1-ish branch to go from v3.10 based development
to a v3.11 based one.
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Pull networking fixes from David Miller:
 "A couple interesting SKB fragment handling fixes, plus the usual small
  bits here and there:

   1) Fix 64-bit divide build failure on 32-bit platforms in mlx5, from
      Tim Gardner.

   2) Get rid of a stupid reimplementation on "%*phC" in our sysfs MAC
      address printing helper.

   3) Fix NETIF_F_SG capability advertisement in hyperv driver, if the
      device can't do checksumming offloads then it shouldn't say it can
      do SG either.  From Haiyang Zhang.

   4) bgmac needs to depend on PHYLIB, from Hauke Mehrtens.

   5) Don't leak DMA mappings on mapping failures, from Neil Horman.

   6) We need to reset the transport header of SKBs in ipv4 before we
      attempt to perform early socket demux, just like ipv6 does.  From
      Eric Dumazet.

   7) Add missing locking on vxlan device removal, from Stephen
      Hemminger.

   8) xen-netfront has to make two passes over an SKB to prepare it for
      transfer.  One pass calculates the number of slots needed, the
      second massages the SKB and fills the slots.  Unfortunately, the
      first pass doesn't calculate the number of slots properly so we
      can end up trying to build a MAX_SKB_FRAGS + 1 SKB which doesn't
      work out so well.  Fix from Jan Beulich with help and discussion
      with several others.

   9) Fix a similar problem in tun and macvtap, which have to split up
      scatter-gather elements at PAGE_SIZE boundaries.  Don't do
      zerocopy if it would result in a > MAX_SKB_FRAGS skb.  Fixes from
      Jason Wang.

  10) On receive, once we've decoded the VLAN state completely, clear
      skb->vlan_tci.  Otherwise demuxed tunnels underneath can trigger
      the VLAN code again, corrupting the packet.  Fix from Eric
      Dumazet"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  vlan: fix a race in egress prio management
  vlan: mask vlan prio bits
  macvtap: do not zerocopy if iov needs more pages than MAX_SKB_FRAGS
  tuntap: do not zerocopy if iov needs more pages than MAX_SKB_FRAGS
  pkt_sched: sch_qfq: remove a source of high packet delay/jitter
  xen-netfront: pull on receive skb may need to happen earlier
  vxlan: add necessary locking on device removal
  hyperv: Fix the NETIF_F_SG flag setting in netvsc
  net: Fix sysfs_format_mac() code duplication.
  be2net: Fix to avoid hardware workaround when not needed
  macvtap: do not assume 802.1Q when send vlan packets
  macvtap: fix the missing ret value of TUNSETQUEUE
  ipv4: set transport header earlier
  mlx5 core: Fix __udivdi3 when compiling for 32 bit arches
  bgmac: add dependency to phylib
  net/irda: fixed style issues in irlan_eth
  ethtool: fixed trailing statements in ethtool
  ndisc: bool initializations should use true and false
  atl1e: unmap partially mapped skb on dma error and free skb

Pull x86 fixes from Peter Anvin:
 "Trying again to get the fixes queue, including the fixed IDT alignment
  patch.

  The UEFI patch is by far the biggest issue at hand: it is currently
  causing quite a few machines to boot.  Which is sad, because the only
  reason they would is because their BIOSes touch memory that has
  already been freed.  The other major issue is that we finally have
  tracked down the root cause of a significant number of machines
  failing to suspend/resume"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: Make sure IDT is page aligned
  x86, suspend: Handle CPUs which fail to #GP on RDMSR
  x86/platform/ce4100: Add header file for reboot type
  Revert "UEFI: Don't pass boot services regions to SetVirtualAddressMap()"
  efivars: check for EFI_RUNTIME_SERVICES

Pull md bug fixes from NeilBrown:
 "Sorry boss, back at work now boss.  Here's them nice shiny patches ya
  wanted.  All nicely tagged and justified for -stable and everyfing:

  Three bug fixes for md in 3.10

  3.10 wasn't a good release for md.  The bio changes left a couple of
  bugs, and an md "fix" created another one.

  These three patches appear to fix the issues and have been tagged for
  -stable"

* tag 'md-3.11-fixes' of git://neil.brown.name/md:
  md/raid1: fix bio handling problems in process_checks()
  md: Remove recent change which allows devices to skip recovery.
  md/raid10: fix two problems with RAID10 resync.