Convert DAX faults to use iomap infrastructure. We would not have to start
transaction in ext4_dax_fault() anymore since ext4_iomap_begin takes
care of that but so far we do that to avoid lock inversion of
transaction start with DAX entry lock which gets acquired in
dax_iomap_fault() before calling ->iomap_begin handler.
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

Currently mapping of blocks for DAX writes happen with
EXT4_GET_BLOCKS_PRE_IO flag set. That has a result that each
ext4_map_blocks() call creates a separate written extent, although it
could be merged to the neighboring extents in the extent tree.  The
reason for using this flag is that in case the extent is unwritten, we
need to convert it to written one and zero it out. However this "convert
mapped range to written" operation is already implemented by
ext4_map_blocks() for the case of data writes into unwritten extent. So
just use flags for that mode of operation, simplify the code, and avoid
unnecessary split extents.
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

Implement DAX writes using the new iomap infrastructure instead of
overloading the direct IO path.
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

Use iomap infrastructure for zeroing blocks when in DAX mode.
ext4_iomap_begin() handles read requests just fine and that's all that
is needed for iomap_zero_range().
Reviewed-by: NRoss Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

Implement basic iomap_begin function that handles reading and use it for
DAX reads.
Reviewed-by: NRoss Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

Currently we have S_DAX set inode->i_flags for a regular file whenever
ext4 is mounted with dax mount option. However in some cases we cannot
really do DAX - e.g. when inode is marked to use data journalling, when
inode data is being encrypted, or when inode is stored inline. Make sure
S_DAX flag is appropriately set/cleared in these cases.
Reviewed-by: NRoss Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

Runs of xfstest ext4/022 on nojournal file systems result in failures
because the inodes of some of its test files do not expand as expected.
The cause is a conditional in ext4_mark_inode_dirty() that prevents inode
expansion unless the test file system has a journal.  Remove this
unnecessary restriction.
Signed-off-by: NEric Whitney <enwlinux@gmail.com>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

CURRENT_TIME_SEC and CURRENT_TIME are not y2038 safe.
current_time() will be transitioned to be y2038 safe
along with vfs.

current_time() returns timestamps according to the
granularities set in the super_block.
The granularity check in ext4_current_time() to call
current_time() or CURRENT_TIME_SEC is not required.
Use current_time() directly to obtain timestamps
unconditionally, and remove ext4_current_time().

Quota files are assumed to be on the same filesystem.
Hence, use current_time() for these files as well.
Signed-off-by: NDeepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
Reviewed-by: NArnd Bergmann <arnd@arndb.de>

Return errors to the caller instead of declaring the file system
corrupted.
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
Reviewed-by: NJan Kara <jack@suse.cz>

This allows us to properly propagate errors back up to
ext4_truncate()'s callers.  This also means we no longer have to
silently ignore some errors (e.g., when trying to add the inode to the
orphan inode list).
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
Reviewed-by: NJan Kara <jack@suse.cz>

Avoid re-use of page index as tweak for AES-XTS when multiple parts of
same page are encrypted. This will happen on multiple (partial) calls of
fscrypt_encrypt_page on same page.
page->index is only valid for writeback pages.
Signed-off-by: NDavid Gstir <david@sigma-star.at>
Signed-off-by: NRichard Weinberger <richard@nod.at>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

Not all filesystems work on full pages, thus we should allow them to
hand partial pages to fscrypt for en/decryption.
Signed-off-by: NDavid Gstir <david@sigma-star.at>
Signed-off-by: NRichard Weinberger <richard@nod.at>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

Some filesystem might pass pages which do not have page->mapping->host
set to the encrypted inode. We want the caller to explicitly pass the
corresponding inode.
Signed-off-by: NDavid Gstir <david@sigma-star.at>
Signed-off-by: NRichard Weinberger <richard@nod.at>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

When DAX calls _ext4_get_block() and the file offset points to a hole we
currently don't set bh->b_size.  This is current worked around via
buffer_size_valid() in fs/dax.c.

_ext4_get_block() has the hole size information from ext4_map_blocks(), so
populate bh->b_size so we can remove buffer_size_valid() in a later patch.
Signed-off-by: NRoss Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: NJan Kara <jack@suse.cz>
Signed-off-by: NDave Chinner <david@fromorbit.com>

When zeroing blocks for DAX allocations, we also have to unmap aliases
in the block device mappings.  Otherwise writeback can overwrite zeros
with stale data from block device page cache.
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org

We can easily support parallel direct IO reads. We only have to make
sure we cannot expose uninitialized data by reading allocated block to
which data was not written yet, or which was already truncated. That is
easily achieved by holding inode_lock in shared mode - that excludes all
writes, truncates, hole punches. We also have to guard against page
writeback allocating blocks for delay-allocated pages - that race is
handled by the fact that we writeback all the pages in the affected
range and the lock protects us from new pages being created there.
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

Currently when doing a DAX hole punch with ext4 we fail to do a writeback.
This is because the logic around filemap_write_and_wait_range() in
ext4_punch_hole() only looks for dirty page cache pages in the radix tree,
not for dirty DAX exceptional entries.
Signed-off-by: NRoss Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: NJan Kara <jack@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

inode_change_ok() will be resposible for clearing capabilities and IMA
extended attributes and as such will need dentry. Give it as an argument
to inode_change_ok() instead of an inode. Also rename inode_change_ok()
to setattr_prepare() to better relect that it does also some
modifications in addition to checks.
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJan Kara <jack@suse.cz>

Pages clear buffers after ext4 delayed block allocation failed,
However, it does not clean its pte_dirty flag.
if the pages unmap ,in cording to the pte_dirty ,
unmap_page_range may try to call __set_page_dirty,

which may lead to the bugon at 
mpage_prepare_extent_to_map:head = page_buffers(page);.

This patch just call clear_page_dirty_for_io to clean pte_dirty 
at mpage_release_unused_pages for pages mmaped. 

Steps to reproduce the bug:

（1） mmap a file in ext4
	addr = (char *)mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_SHARED,
	       	            fd, 0);
	memset(addr, 'i', 4096);

（2） return EIO at 

	ext4_writepages->mpage_map_and_submit_extent->mpage_map_one_extent 

which causes this log message to be print:

                ext4_msg(sb, KERN_CRIT,
                        "Delayed block allocation failed for "
                        "inode %lu at logical offset %llu with"
                        " max blocks %u with error %d",
                        inode->i_ino,
                        (unsigned long long)map->m_lblk,
                        (unsigned)map->m_len, -err);

(3）Unmap the addr cause warning at

	__set_page_dirty:WARN_ON_ONCE(warn && !PageUptodate(page));

(4) wait for a minute,then bugon happen.

Cc: stable@vger.kernel.org
Signed-off-by: Nwangguang <wangguang03@zte.com>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

Use the ext4_{has,set,clear}_feature_* helpers to replace the old
feature helpers.
Signed-off-by: NKaho Ng <ngkaho1234@gmail.com>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
Reviewed-by: NJan Kara <jack@suse.cz>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>

Now, ext4_do_update_inode() clears high 16-bit fields of uid/gid
of deleted and evicted inode to fix up interoperability with old
kernels. However, it checks only i_dtime of an inode to determine
whether the inode was deleted and evicted, and this is very risky,
because i_dtime can be used for the pointer maintaining orphan inode
list, too. We need to further check whether the i_dtime is being
used for the orphan inode list even if the i_dtime is not NULL.

We found that high 16-bit fields of uid/gid of inode are unintentionally
and permanently cleared when the inode truncation is just triggered,
but not finished, and the inode metadata, whose high uid/gid bits are
cleared, is written on disk, and the sudden power-off follows that
in order.

Cc: stable@vger.kernel.org
Signed-off-by: NDaeho Jeong <daeho.jeong@samsung.com>
Signed-off-by: NHobin Woo <hobin.woo@samsung.com>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

When we need to move xattrs into external xattr block, we call
ext4_xattr_block_set() from ext4_expand_extra_isize_ea(). That may end
up calling ext4_mark_inode_dirty() again which will recurse back into
the inode expansion code leading to deadlocks.

Protect from recursion using EXT4_STATE_NO_EXPAND inode flag and move
its management into ext4_expand_extra_isize_ea() since its manipulation
is safe there (due to xattr_sem) from possible races with
ext4_xattr_set_handle() which plays with it as well.

CC: stable@vger.kernel.org   # 4.4.x
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

This patch removes the most parts of internal crypto codes.
And then, it modifies and adds some ext4-specific crypt codes to use the generic
facility.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

If ext4_fill_super() fails early, it's possible for ext4_evict_inode()
to call ext4_should_journal_data() before superblock options and flags
are fully set up.  In that case, the iput() on the journal inode can
end up causing a BUG().

Work around this problem by reordering the tests so we only call
ext4_should_journal_data() after we know it's not the journal inode.

Fixes: 2d859db3 ("ext4: fix data corruption in inodes with journalled data")
Fixes: 2b405bfa ("ext4: fix data=journal fast mount/umount hang")
Cc: Jan Kara <jack@suse.cz>
Cc: stable@vger.kernel.org
Signed-off-by: NVegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
Reviewed-by: NJan Kara <jack@suse.cz>

Commit 06bd3c36 (ext4: fix data exposure after a crash) uncovered a
deadlock in ext4_writepages() which was previously much harder to hit.
After this commit xfstest generic/130 reproduces the deadlock on small
filesystems.

The problem happens when ext4_do_update_inode() sets LARGE_FILE feature
and marks current inode handle as synchronous. That subsequently results
in ext4_journal_stop() called from ext4_writepages() to block waiting for
transaction commit while still holding page locks, reference to io_end,
and some prepared bio in mpd structure each of which can possibly block
transaction commit from completing and thus results in deadlock.

Fix the problem by releasing page locks, io_end reference, and
submitting prepared bio before calling ext4_journal_stop().

[ Changed to defer the call to ext4_journal_stop() only if the handle
  is synchronous.  --tytso ]
Reported-and-tested-by: NEryu Guan <eguan@redhat.com>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
CC: stable@vger.kernel.org
Signed-off-by: NJan Kara <jack@suse.cz>

We temporally change checksum fields in buffers of some types of
metadata into '0' for verifying the checksum values. By doing this
without locking the buffer, some metadata's checksums, which are
being committed or written back to the storage, could be damaged.
In our test, several metadata blocks were found with damaged metadata
checksum value during recovery process. When we only verify the
checksum value, we have to avoid modifying checksum fields directly.
Signed-off-by: NDaeho Jeong <daeho.jeong@samsung.com>
Signed-off-by: NYoungjin Gil <youngjin.gil@samsung.com>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>

This has ll_rw_block users pass in the operation and flags separately,
so ll_rw_block can setup the bio op and bi_rw flags on the bio that
is submitted.
Signed-off-by: NMike Christie <mchristi@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

This has submit_bh users pass in the operation and flags separately,
so submit_bh_wbc can setup the bio op and bi_rw flags on the bio that
is submitted.
Signed-off-by: NMike Christie <mchristi@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Currently ext4 treats DAX IO the same way as direct IO. I.e., it
allocates unwritten extents before IO is done and converts unwritten
extents afterwards. However this way DAX IO can race with page fault to
the same area:

ext4_ext_direct_IO()				dax_fault()
  dax_io()
    get_block() - allocates unwritten extent
    copy_from_iter_pmem()
						  get_block() - converts
						    unwritten block to
						    written and zeroes it
						    out
  ext4_convert_unwritten_extents()

So data written with DAX IO gets lost. Similarly dax_new_buf() called
from dax_io() can overwrite data that has been already written to the
block via mmap.

Fix the problem by using pre-zeroed blocks for DAX IO the same way as we
use them for DAX mmap. The downside of this solution is that every
allocating write writes each block twice (once zeros, once data). Fixing
the race with locking is possible as well however we would need to
lock-out faults for the whole range written to by DAX IO. And that is
not easy to do without locking-out faults for the whole file which seems
too aggressive.
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

Currently ext4 direct IO handling is split between ext4_ext_direct_IO()
and ext4_ind_direct_IO(). However the extent based function calls into
the indirect based one for some cases and for example it is not able to
handle file extending. Previously it was not also properly handling
retries in case of ENOSPC errors. With DAX things would get even more
contrieved so just refactor the direct IO code and instead of indirect /
extent split do the split to read vs writes.
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

ext4_dax_get_blocks() was accidentally omitted fixing get blocks
handlers to properly handle transient ENOSPC errors. Fix it now to use
ext4_get_blocks_trans() helper which takes care of these errors.
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

Including blkdev_direct_IO and dax_do_io.  It has to be ki_pos to actually
work, so eliminate the superflous argument.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

In ext4, there is a race condition between changing inode journal mode
and ext4_writepages(). While ext4_writepages() is executed on a
non-journalled mode inode, the inode's journal mode could be enabled
by ioctl() and then, some pages dirtied after switching the journal
mode will be still exposed to ext4_writepages() in non-journaled mode.
To resolve this problem, we use fs-wide per-cpu rw semaphore by Jan
Kara's suggestion because we don't want to waste ext4_inode_info's
space for this extra rare case.
Signed-off-by: NDaeho Jeong <daeho.jeong@samsung.com>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
Reviewed-by: NJan Kara <jack@suse.cz>

We already allocate delalloc blocks before changing the inode mode into
"per-file data journal" mode to prevent delalloc blocks from remaining
not allocated, but another issue concerned with "BH_Unwritten" status
still exists. For example, by fallocate(), several buffers' status
change into "BH_Unwritten", but these buffers cannot be processed by
ext4_alloc_da_blocks(). So, they still remain in unwritten status after
per-file data journaling is enabled and they cannot be changed into
written status any more and, if they are journaled and eventually
checkpointed, these unwritten buffer will cause a kernel panic by the
below BUG_ON() function of submit_bh_wbc() when they are submitted
during checkpointing.

static int submit_bh_wbc(int rw, struct buffer_head *bh,...
{
        ...
        BUG_ON(buffer_unwritten(bh));

Moreover, when "dioread_nolock" option is enabled, the status of a
buffer is changed into "BH_Unwritten" after write_begin() completes and
the "BH_Unwritten" status will be cleared after I/O is done. Therefore,
if a buffer's status is changed into unwrutten but the buffer's I/O is
not submitted and completed, it can cause the same problem after
enabling per-file data journaling. You can easily generate this bug by
executing the following command.

./kvm-xfstests -C 10000 -m nodelalloc,dioread_nolock generic/269

To resolve these problems and define a boundary between the previous
mode and per-file data journaling mode, we need to flush and wait all
the I/O of buffers of a file before enabling per-file data journaling
of the file.
Signed-off-by: NDaeho Jeong <daeho.jeong@samsung.com>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
Reviewed-by: NJan Kara <jack@suse.cz>

Currently we ask jbd2 to write all dirty allocated buffers before
committing a transaction when doing writeback of delay allocated blocks.
However this is unnecessary since we move all pages to writeback state
before dropping a transaction handle and then submit all the necessary
IO. We still need the transaction commit to wait for all the outstanding
writeback before flushing disk caches during transaction commit to avoid
data exposure issues though. Use the new jbd2 capability and ask it to
only wait for outstanding writeback during transaction commit when
writing back data in ext4_writepages().
Tested-by: N"HUANG Weller (CM/ESW12-CN)" <Weller.Huang@cn.bosch.com>
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

This flag is just duplicating what ext4_should_order_data() tells you
and is used in a single place. Furthermore it doesn't reflect changes to
inode data journalling flag so it may be possibly misleading. Just
remove it.
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

Huang has reported that in his powerfail testing he is seeing stale
block contents in some of recently allocated blocks although he mounts
ext4 in data=ordered mode. After some investigation I have found out
that indeed when delayed allocation is used, we don't add inode to
transaction's list of inodes needing flushing before commit. Originally
we were doing that but commit f3b59291 removed the logic with a
flawed argument that it is not needed.

The problem is that although for delayed allocated blocks we write their
contents immediately after allocating them, there is no guarantee that
the IO scheduler or device doesn't reorder things and thus transaction
allocating blocks and attaching them to inode can reach stable storage
before actual block contents. Actually whenever we attach freshly
allocated blocks to inode using a written extent, we should add inode to
transaction's ordered inode list to make sure we properly wait for block
contents to be written before committing the transaction. So that is
what we do in this patch. This also handles other cases where stale data
exposure was possible - like filling hole via mmap in
data=ordered,nodelalloc mode.

The only exception to the above rule are extending direct IO writes where
blkdev_direct_IO() waits for IO to complete before increasing i_size and
thus stale data exposure is not possible. For now we don't complicate
the code with optimizing this special case since the overhead is pretty
low. In case this is observed to be a performance problem we can always
handle it using a special flag to ext4_map_blocks().

CC: stable@vger.kernel.org
Fixes: f3b59291Reported-by: N"HUANG Weller (CM/ESW12-CN)" <Weller.Huang@cn.bosch.com>
Tested-by: N"HUANG Weller (CM/ESW12-CN)" <Weller.Huang@cn.bosch.com>
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

Mostly direct substitution with occasional adjustment or removing
outdated comments.
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.

This promise never materialized.  And unlikely will.

We have many places where PAGE_CACHE_SIZE assumed to be equal to
PAGE_SIZE.  And it's constant source of confusion on whether
PAGE_CACHE_* or PAGE_* constant should be used in a particular case,
especially on the border between fs and mm.

Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much
breakage to be doable.

Let's stop pretending that pages in page cache are special.  They are
not.

The changes are pretty straight-forward:

 - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;

 - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;

 - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN};

 - page_cache_get() -> get_page();

 - page_cache_release() -> put_page();

This patch contains automated changes generated with coccinelle using
script below.  For some reason, coccinelle doesn't patch header files.
I've called spatch for them manually.

The only adjustment after coccinelle is revert of changes to
PAGE_CAHCE_ALIGN definition: we are going to drop it later.

There are few places in the code where coccinelle didn't reach.  I'll
fix them manually in a separate patch.  Comments and documentation also
will be addressed with the separate patch.

virtual patch

@@
expression E;
@@
- E << (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E

@@
expression E;
@@
- E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E

@@
@@
- PAGE_CACHE_SHIFT
+ PAGE_SHIFT

@@
@@
- PAGE_CACHE_SIZE
+ PAGE_SIZE

@@
@@
- PAGE_CACHE_MASK
+ PAGE_MASK

@@
expression E;
@@
- PAGE_CACHE_ALIGN(E)
+ PAGE_ALIGN(E)

@@
expression E;
@@
- page_cache_get(E)
+ get_page(E)

@@
expression E;
@@
- page_cache_release(E)
+ put_page(E)
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently if block allocation for DIO or DAX write fails due to ENOSPC,
we just returned it to userspace. However these ENOSPC errors can be
transient because the transaction freeing blocks has not yet committed.
This demonstrates as failures of generic/102 test when the filesystem is
mounted with 'dax' mount option.

Fix the problem by properly retrying the allocation in case of ENOSPC
error in get blocks functions used for direct IO.
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
Tested-by: Ross Zwisler <ross.zwisler@linux.intel.com>