Drop two extra occurrences of "on" in option title and help text.

Fixes: 379d7ac7 ("phy: mdio-thunder: Add driver for Cavium Thunder SoC MDIO buses.")
Cc: David Daney <david.daney@cavium.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Acked-by: NDavid Daney <david.daney@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add lan78xx_get_stats64 of ndo_get_stats64 to report
all statistics counters including errors from HW statistics.

Read from HW when auto suspend is disabled, use saved counter when
auto suspend is enabled because periodic call to ndo_get_stats64
prevents USB auto suspend.
Signed-off-by: NWoojung Huh <woojung.huh@microchip.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Update to handle statistics counter rollover.
Check statistics counter periodically and compensate it when
counter value rolls over at max (20 or 32bits).

Simple mechanism adjusts monitoring timer to allow USB auto suspend.
Signed-off-by: NWoojung Huh <woojung.huh@microchip.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Sowmini Varadhan says:

====================
RDS: TCP: tunable socket buffer parameters

Patch 1 uses sysctl to create tunable socket buffer size parameters.

Patch 2 removes an unuused constant.

v2: use sysctl
v3: review comments from Santosh Shilimkar, Eric Dumazet
v4: review comments from Hannes Sowa
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

RDS_TCP_DEFAULT_BUFSIZE has been unused since commit 1edd6a14
("RDS-TCP: Do not bloat sndbuf/rcvbuf in rds_tcp_tune").
Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add per-net sysctl tunables to set the size of sndbuf and
rcvbuf on the kernel tcp socket.

The tunables are added at /proc/sys/net/rds/tcp/rds_tcp_sndbuf
and /proc/sys/net/rds/tcp/rds_tcp_rcvbuf.

These values must be set before accept() or connect(),
and there may be an arbitrary number of existing rds-tcp
sockets when the tunable is modified. To make sure that all
connections in the netns pick up the same value for the tunable,
we reset existing rds-tcp connections in the netns, so that
they can reconnect with the new parameters.
Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Convert the dma transfers to be dmaengine based, now pxa has a dmaengine
slave driver. This makes this driver a bit more PXA agnostic.

The driver was only compile tested. The risk is quite small as no
current PXA platform I'm aware of is using smc911x driver.
Signed-off-by: NRobert Jarzmik <robert.jarzmik@free.fr>
Tested-by: NFabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Zhang Shengju says:

====================
remove duplicate set of flag IFF_MULTICAST

This patch series remove duplicate set of flag IFF_MULTICAST.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Remove unnecessary set of flag IFF_MULTICAST, since ether_setup
already does this.
Signed-off-by: NZhang Shengju <zhangshengju@cmss.chinamobile.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Remove unnecessary set of flag IFF_MULTICAST, since ether_setup
already does this.
Signed-off-by: NZhang Shengju <zhangshengju@cmss.chinamobile.com>
Reviewed-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: NAndy Gospodarek <gospo@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix a comment typo.
Signed-off-by: NZhang Shengju <zhangshengju@cmss.chinamobile.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There were two issues here:
1) dma_mapping_error() return true/false but we want to return -ENOMEM
2) If dmaengine_prep_slave_sg() failed then "err" wasn't set but
   presumably that should be -ENOMEM as well.

I changed the success path to "return 0;" instead of "return ret;" for
clarity.

Fixes: 94fe8c68 ('ks8842: Support DMA when accessed via timberdale')
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Daniel Borkmann says:

====================
Minor BPF follow-ups

Some minor last follow-ups I still had in my queue. The first one adds
readability support for __sk_buff's tc_classid member, the remaining
two are some minor cleanups. For details please see individual patches.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

eBPF defines this as BPF_TUNLEN_MAX and OVS just uses the hard-coded
value inside struct sw_flow_key. Thus, add and use IP_TUNNEL_OPTS_MAX
for this, which makes the code a bit more generic and allows to remove
BPF_TUNLEN_MAX from eBPF code.
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We can just add a small helper dst_tclassid() for retrieving the
dst->tclassid value. It makes the code a bit better in that we can
get rid of the ifdef from filter.c by moving this into the header.
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently, the tc_classid from eBPF skb context is write-only, but there's
no good reason for tc programs to limit it to write-only. For example,
it can be used to transfer its state via tail calls where the resulting
tc_classid gets filled gradually.
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

MVNETA_BM has a dependency on MVNETA, so we can only select the former
if the latter is enabled. However, the code dependency is the reverse:
The mvneta module can call into the mvneta_bm module, so mvneta cannot
be a built-in if mvneta_bm is a module, or we get a link error:

drivers/net/built-in.o: In function `mvneta_remove':
drivers/net/ethernet/marvell/mvneta.c:4211: undefined reference to `mvneta_bm_pool_destroy'
drivers/net/built-in.o: In function `mvneta_bm_update_mtu':
drivers/net/ethernet/marvell/mvneta.c:1034: undefined reference to `mvneta_bm_bufs_free'

This avoids the problem by further clarifying the dependency so that
MVNETA_BM is a silent Kconfig option that gets turned on by the
new MVNETA_BM_ENABLE option. This way both the core HWBM module and
the MVNETA_BM code are always built-in when needed.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Fixes: dc35a10f ("net: mvneta: bm: add support for hardware buffer management")
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There are two issues with the current code. First one is that we need
to set res->class to 0 in case we use non-default classid matching.

This is important for the case where cls_bpf was initially set up with
an optional binding to a default class with tcf_bind_filter(), where
the underlying qdisc implements bind_tcf() that fills res->class and
tests for it later on when doing the classification. Convention for
these cases is that after tc_classify() was called, such qdiscs (atm,
drr, qfq, cbq, hfsc, htb) first test class, and if 0, then they lookup
based on classid.

Second, there's a bug with da mode, where res->classid is only assigned
a 16 bit minor, but it needs to expand to the full 32 bit major/minor
combination instead, therefore we need to expand with the bound major.
This is fine as classes belonging to a classful qdisc must share the
same major.

Fixes: 045efa82 ("cls_bpf: introduce integrated actions")
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Aaron Young says:

====================
ldmvsw: Add ldmvsw driver

This series adds a new Logical Domains vSwitch (ldmvsw) driver.

The ldmvsw driver code will live in the drivers/net/ethernet/sun/
directory and will operate on Oracle systems running SPARC Linux in a
Logical Domains environment (typically in the control domain).

The ldmvsw driver is very similar in function to the existing sunvnet
driver. Ldmvsw creates a network interface for each "vsw-port" node
found in the Machine Description (MD) of a service domain. These
nodes correspond to ports on a vswitch created by the logical domains
manager. The created network interface(s) can be used by bridge/vswitch
software (such as the Linux bridge or Open vSwitch) to provide
guest domain(s) with network interconnectivity or connectivity
to a physical network.

Here is a example diagram of ldmvsw driver usage in a logical
domain environment to provide a guest domain with network connectivity
to a physical NIC on the service domain:

   +----------------+             +-----------------
   | Service Domain |             |  Guest domain  |
   |                |             |                |
   |  LinuxBridge   |             |                |
   |    |    |      |             |                |
   |   NIC Ldmvsw   |             |    Sunvnet     |
   +----------------+             +----------------+
        |    |           LDC              |
       LAN   ------------------------------

As stated, the sunvnet and ldmvsw drivers are _very_ similar in function.
They both create network interface(s) to receive/transmit network
traffic across LDC network channel(s). Since the driver is so similar
in function to sunvnet, the approach will be as follows to integrate
the driver and take advantage of common code:

Patch #1: Split sunvnet.c driver into sunvnet.c and sunvnet_common.c
Patch #2: Modify the sunvnet_common code and data structures to be compatible
          with both the sunvnet and ldmvsw drivers.
Patch #3: Add the new ldmvsw.c driver code
Patch #4: Checkpatch cleanup of the sunvnet/sunvnet_common code.

NOTE - Patch#1 renames a file (sunvnet.h -> sunvnet_common.h). When generating
the patches (using git format-patch), I had to use the --no-renames option
otherwise patch#1 would NOT apply using 'patch -p1' - which as I
understand is a requirement for patch acceptance. I wasn't sure if this
is proper thing to do.  Please advise if not. Thanks.

v2 changes:
  * change all EXPORT_SYMBOL declarations to EXPORT_SYMBOL_GPL
  * remove inline attribute for external function port_is_up_common()
  * Give all exported/global funcs in sunvnet_common.c a 'sunvnet_' prefix
    to avoid kernel global namespace pollution/collisions
  * ldmvsw.c: Order local variable declarations from longest to shortest line
  * ldmvsw.c: register the netdevice after all supporting state is ready/setup.
              NOTE: The consensus at Oracle is that the following functions
                    must be done AFTER register_netdev() - this is the same
                    ordering currently used in the sunvnet driver:
                    1. sunvnet_port_add_txq_common() - needs registered netdev
                    2. napi_enable() - requires registered netdev
                    3. vio_port_up() - as soon as this function is called
                                       LDC handshake messages will come in
                                       which must be handled by the napi code.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

  Checkpatch updates for sunvnet.c and sunvnet_common.c.
Signed-off-by: NAaron Young <aaron.young@oracle.com>
Signed-off-by: NRashmi Narasimhan <rashmi.narasimhan@oracle.com>
Reviewed-by: NSowmini Varadhan <sowmini.varadhan@oracle.com>
Reviewed-by: NAlexandre Chartre <Alexandre.Chartre@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

  Add ldmvsw.c driver

  Details:

  The ldmvsw driver very closely follows the sunvnet.c code and makes
  use of the sunvnet_common.c code for core functionality.

  A significant difference between sunvnet and ldmvsw driver is
  sunvnet creates a network interface for each vnet-port *parent*
  node in the MD while the ldmvsw driver creates a network interface
  for every vsw-port node in the Machine Description (MD).
  Therefore the netdev_priv() for sunvnet is a vnet structure while
  the netdev_priv() for ldmvsw is a vnet_port structure.

  Vnet_port structures allocated by ldmvsw have the vsw bit set.
  When finding the net_device associated with a port, the common code keys
  off this bit to use either the net_device found in the vnet_port or the
  net_device in the vnet structure (see the VNET_PORT_TO_NET_DEVICE() macro in
  sunvnet_common.h). This scheme allows the common code to work with
  both drivers with minimal changes.

  Similar to Xen, network interfaces created by the ldmvsw driver will always
  have a HW Addr (i.e. mac address) of FE:FF:FF:FF:FF:FF and each will be
  assigned the devname "vif<cfg_handle>.<port_id>" - where <cfg_handle> and
  <port_id> are a unique handle/port pair assigned to the associated
  vsw-port node in the MD.
Signed-off-by: NAaron Young <aaron.young@oracle.com>
Signed-off-by: NRashmi Narasimhan <rashmi.narasimhan@oracle.com>
Reviewed-by: NSowmini Varadhan <sowmini.varadhan@oracle.com>
Reviewed-by: NAlexandre Chartre <Alexandre.Chartre@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

  Modify sunvnet common code and data structures to be compatible
  with both sunvnet and ldmvsw drivers.

  Details:

  Sunvnet operates on "vnet-port" nodes which appear in the Machine
  Description (MD) in a guest domain. Ldmvsw operates on "vsw-port"
  nodes which appear in the MD of a service domain.

  A difference between the sunvnet driver and the ldmvsw driver is
  the sunvnet driver creates a network interface (i.e. a struct net_device)
  for every vnet-port *parent* "network" node. Several vnet-ports may appear
  under this common parent network node - each corresponding to a common parent
  network interface.  Conversely, since bridge/vswitch software will need
  to interface with every vsw-port in a system, the ldmvsw driver creates
  a network interface (i.e. a struct net_device) for every vsw-port - not
  every parent node as with sunvnet.  This difference required some special
  handling in the common code as explained below.

  There are 2 key data structures used by the sunvnet and ldmvsw drivers
  (which are now found in sunvnet_common.h):

  1. struct vnet_port
     This structure represents a vnet-port node in sunvnet and a vsw-port
     in the ldmvsw driver.

  2. struct vnet
     This structure represents a parent "network" node in sunvnet and a parent
     "virtual-network-switch" node in ldmvsw.

  Since the sunvnet driver allocates a net_device for every parent "network"
  node, a net_device member appears in the struct vnet. Since the ldmvsw
  driver allocates a net_device for every port, a net_device member was
  added to the vnet_port. The common code distinguishes which structure
  net_device member to use by checking a 'vsw' bit that was added to the
  vnet_port structure. See the VNET_PORT_TO_NET_DEVICE() marco in
  sunvnet_common.h.

  The netdev_priv() in sunvnet is allocated as a vnet. The netdev_priv()
  in ldmvsw is a vnet_port. Therefore, any place in the common code
  where a netdev_priv() call was made, a wrapper function was implemented
  in each driver to first get the vnet and/or vnet_port (in a driver
  specific way) and pass them as newly added parameters to the common
  functions (see wrapper funcs: vnet_set_rx_mode() and vnet_poll_controller()).
  Since these wrapper functions call __tx_port_find(), __tx_port_find() was
  moved from the common code back into sunvnet.c. Note - ldmvsw.c does not
  require this function.

  These changes also required that port_is_up() be made
  into a common function and thus it was given a _common suffix and
  exported like the other common functions.

  A wrapper function was also added for vnet_start_xmit_common() to pass a
  driver-specific function arg to return the port associated with a given
  struct sk_buff and struct net_device. This was required because
  vnet_start_xmit_common() grabs a lock prior to getting the associated
  port. Using a function pointer arg allowed the code to work unchanged
  without risking changes to the non-trivial locking logic in
  vnet_start_xmit_common().
Signed-off-by: NAaron Young <aaron.young@oracle.com>
Signed-off-by: NRashmi Narasimhan <rashmi.narasimhan@oracle.com>
Reviewed-by: NSowmini Varadhan <sowmini.varadhan@oracle.com>
Reviewed-by: NAlexandre Chartre <Alexandre.Chartre@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

  Split sunvnet.c into sunvnet.c and sunvnet_common.c.

  Details:

  Since the sunvnet and ldmvsw drivers will both use common sunvnet code,
  move the functions (and support functions) anticipated to be common code
  from sunvnet.c to sunvnet_common.c. Similarly, sunvnet.h was renamed to
  sunvnet_common.h. The sunvnet_common.c code will be compiled into the
  kernel and act as a library of functions that are linked by either
  (or both) drivers when loaded.

  Function names for external functions in sunvnet_common.c (to be
  called by both the sunvnet and ldmvsw drivers) were tagged with a "_common"
  suffix to clearly designate them as common functions.

  No functional changes as of yet... just moved code verbatim to the new
  sunvnet_common.c/h files.

  Makefile/Kconfig support added to build sunvnet_common.c file. The code
  is included in the kernel if SUN_LDOMS is defined/selected.

  NOTE - per the SubmittingPatches documentation, since the code was just
  moved from one file another, the code was NOT checkpatch'd in this commit
  to aid in review.
Signed-off-by: NAaron Young <aaron.young@oracle.com>
Signed-off-by: NRashmi Narasimhan <rashmi.narasimhan@oracle.com>
Reviewed-by: NSowmini Varadhan <sowmini.varadhan@oracle.com>
Reviewed-by: NAlexandre Chartre <Alexandre.Chartre@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Not all adapters have FC-NPIV configured. If bnx2fc is used with such an
adapter, driver would read irrelevant data from the the nvram and log
"FC-NPIV table with bad length..." In system logs.

Simply accept that reading '0' as the feature offset in nvram indicates
the feature isn't there and return.
Reported-by: NAndrew Patterson <andrew.patterson@hpe.com>
Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The result value is overwritten by a return value of
ravb_ptp_interrupt().
Signed-off-by: NYoshihiro Kaneko <ykaneko0929@gmail.com>
Acked-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When running small packets [length < 256 bytes] traffic, packets were
being dropped due to invalid data in those packets which were
delivered by the driver upto the stack. Using pci_dma_sync_single_for_cpu
ensures copying latest and updated data into skb from the receive buffer.
Signed-off-by: NSony Chacko <sony.chacko@qlogic.com>
Signed-off-by: NManish Chopra <manish.chopra@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If a dt mdio entry has been added least assume that we wont
search for phys attached. The DT and of_mdiobus_register already do
this. This stops DSA phys being found and phys created for them, as
this is handled by the DSA driver.
Signed-off-by: NPhil Reid <preid@electromag.com.au>
Acked-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There was a missing unlock on the error path.

Fixes: 656e7052 ('net-next: mediatek: add support for MT7623 ethernet')
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Acked-by: NJohn Crispin <blogic@openwrt.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

of_phy_connect() returns NULL on error, it never returns error pointers.

Fixes: 656e7052 ('net-next: mediatek: add support for MT7623 ethernet')
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Acked-by: NJohn Crispin <blogic@openwrt.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently output of MPLS packets on tunnel vports is not allowed by Open
vSwitch. This is because historically encapsulation was done in such a way
that the inner_protocol field of the skb needed to hold the inner protocol
for both MPLS and tunnel encapsulation in order for GSO segmentation to be
performed correctly.

Since b2acd1dc ("openvswitch: Use regular GRE net_device instead of
vport") Open vSwitch makes use of lwt to output to tunnel netdevs which
perform encapsulation. As no drivers expose support for MPLS offloads this
means that GSO packets are segmented in software by validate_xmit_skb(),
which is called from __dev_queue_xmit(), before tunnel encapsulation occurs.
This means that the inner protocol of MPLS is no longer needed by the time
encapsulation occurs and the contention on the inner_protocol field of the
skb no longer occurs.

Thus it is now safe to output MPLS to tunnel vports.
Signed-off-by: NSimon Horman <simon.horman@netronome.com>
Reviewed-by: NJesse Gross <jesse@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

No code changes.  Since OCTEON is a Cavium product, move the driver to
the vendor directory to unclutter things a bit.
Signed-off-by: NDavid Daney <david.daney@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Added support for Gemalto's Cinterion PHxx WWAN interfaces
by adding QMI_FIXED_INTF with Cinterion's VID and PID.

PHxx can have:
2 RmNet Interfaces (PID 0x0082) or
1 RmNet + 1 USB Audio interface (PID 0x0083).
Signed-off-by: NHans-Christoph Schemmel <hans-christoph.schemmel@gemalto.com>
Acked-by: NBjørn Mork <bjorn@mork.no>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Now SYN_RECV request sockets are installed in ehash table, an ICMP
handler can find a request socket while another cpu handles an incoming
packet transforming this SYN_RECV request socket into an ESTABLISHED
socket.

We need to remove the now obsolete WARN_ON(req->sk), since req->sk
is set when a new child is created and added into listener accept queue.

If this race happens, the ICMP will do nothing special.

Fixes: 079096f1 ("tcp/dccp: install syn_recv requests into ehash table")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: NBen Lazarus <blazarus@google.com>
Reported-by: NNeal Cardwell <ncardwell@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

vlan drivers lack proper propagation of gso_max_segs from
lower device.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

David Daney says:

====================
net/phy: Fixes for Cavium Thunder MDIO code.

Previous patch set:
commit 5fc7cf17 ("net: thunderx: Cleanup PHY probing code.")
commit 1eefee90 ("phy: mdio-octeon: Refactor into two files/modules")
commit 379d7ac7 ("phy: mdio-thunder: Add driver for Cavium Thunder SoC MDIO buses.")

Had several problems.  We try to fix them here.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It is possible, although unlikely, that probing will find the
phy_device for the first LMAC of a thunder BGX device, but then need
to fail with -EPROBE_DEFER on a subsequent LMAC.  In this case, we
need to call put_device() on each of the phy_devices that were
obtained, but will be unused due to returning -EPROBE_DEFER.

Also, since we can break out of the probing loop early, we need to
explicitly call of_node_put() outside of the loop.
Signed-off-by: NDavid Daney <david.daney@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Previously we selected MDIO_OCTEON, which after creating the Thunder
specific MDIO bus driver is much less useful.
Signed-off-by: NDavid Daney <david.daney@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When the code was factored out of mdio-octeon.c, the
MODULE_DESCRIPTION, MODULE_AUTHOR and MODULE_LICENSE annotations were
inadvertently omitted.  Restore them so that we don't get kernel taint
warnings upon module loading.
Signed-off-by: NDavid Daney <david.daney@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>