- 15 11月, 2011 1 次提交
-
-
由 Takashi Iwai 提交于
When the pin or the DAC doesn't support the stereo, create a mono control instead of creating a stereo control blindly. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 10 11月, 2011 16 次提交
-
-
由 Takashi Iwai 提交于
Now we can move the big acer-aspire-* static quirks to the auto-paresr with some additional pin-configs and verbs. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
So far the driver creates the multi-io jacks only when a single output jack, i.e. no multiple speakers are assigned. This patch adds the similar multi-io detection even with multiple speakers are assigned primarily, so that 5.1-speakers + HP/mic/LI combination can work. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
-
由 Takashi Iwai 提交于
We disabled the check of NO_PRESENCE bit of the default pin-config in commit f4419172 temporarily. One problem was that the first implementation was wrong -- the bit after the shift must be checked. However, this would still give many regressions on machines with broken BIOS. They set this bit wrongly even on active pins. A workaround is to check whether all pins contain this bit. As far as I've checked, broken BIOSen set this bit on all pins, no matter whether active or not. In such a case, the driver should ignore this bit check. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
When freeing the vmaster master element, we should release slave-links properly, not only assumig that slaves will be freed soon later. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
When a virtual mater control is created, the driver looks for slave elements from the assigned card instance. But this may include the elements of other codecs when multiple codecs are on the same HD-audio bus. This works at the first time, but it'll give Oops when it's once freed and re-created via reconfig sysfs. This patch changes the element-look-up strategy to limit only to the mixer elements of the same codec. Reported-by: NDavid Henningsson <david.henningsson@canonical.com> Cc: <stable@kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Konstantin Ozerkov 提交于
Detection code improved by PCI SSID usage. VM optimization now enabled only for known devcices (skip host devices forwarded to VM by VT-d or same kind of technology). For debug/troubleshooting purposes optimization can be forced (on/off) by module parameter: "inside_vm" (boolean). Known devices (PCI SSID): 1af4:1100: Reserved for KVM devices. Note this is not yet implemented for KVM's ICH/AC'97 emulation. 1ab8:xxxx: Parallels ICH/AC'97 emulated sound. [ fixed a minor coding-style issue by tiwai] Signed-off-by: NKonstantin Ozerkov <kozerkov@parallels.com> Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Konstantin Ozerkov 提交于
This is refactoring patch: preparation for add improved detection code. Now all detection code placed in one place. Signed-off-by: NKonstantin Ozerkov <kozerkov@parallels.com> Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Now we're touching the desktop static configs for ALC88x codecs. These are mostly OK with the auto-parser, but some models need careful handling; ALC889 intel mobo requires the COEF setup, and W2JC needs GPIO1 and COEF. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
All ALC882 targa-* models can be replaced with the auto-parser just with the additional GPIO3 setup. And it's generically applied to all MSI boards unless other quirks are present. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
No, I'm not Mr. Monk, but can't resist... Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
The ALC882 model=acer-aspire requires the additional COEF setup. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
This quirk is anyway not used any more, so no problem to remove. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
This works well without any special handling with the auto-parser. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
These static configs are no longer needed by replacement with the auto-parser. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Move these quitks to the auto-parser. They just need some EAPD setups in addition. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 09 11月, 2011 12 次提交
-
-
由 Takashi Iwai 提交于
These are working well with the auto-parser although they have relatively complex setup. Let's go forward. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Remove all ALC882 static configurations for all Lenovo and Haier-w66 quirks. They work fine with the auto-parser now. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
These machines are working well with the auto-parser without static configurations. More diet. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
These models work fine with the auto-parser with the additional COEF setup. The iMac 7,1 (106b:3200) also uses the same quirk, so remove it too. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Not only PCI SSIDs but also look through codec SSIDs for fix-up table entries. MacBook tend to give the same PCI SSID but unique codec SSIDs. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
The ASUS EEE1601 works almost fine with the auto-parser but the static configuration has a certain specific COEF verb. Add this to the fix-up list so that we can drop the whole EEE1601 static config from alc882_quirks.c. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
It works well with the auto-parser and the default BIOS setup. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
-
由 Alexey Fisher 提交于
Logitech HD Webcam c510 provide wrong mixer resolution. Add it to "res = 384" quirk. Signed-off-by: NAlexey Fisher <bug-track@fisher-privat.net> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Julian Wollrath 提交于
Fix the not working internal mic on Dell Vostro 3500 laptop by introducing the new model dell-vostro-3500. Signed-off-by: NJulian Wollrath <jwollrath@web.de> Cc: <stable@kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 David Henningsson 提交于
According to the bug reporter, model=auto is needed to make the internal microphone work. BugLink: https://bugs.launchpad.net/bugs/819699 Reported-by: Andrej (agno01) Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
In the recent usb-audio driver, the initialization of volume ranges may be delayed when the device doesn't respond well at the probing time. But the volume quirks for certain devices are applied only in mixer_ctl_feature_info() thus only at the very first probe and will be missing when the volume range is initialized later. This patch moves the volume quirk code to be always called from the volume-range extraction (get_min_max()), so that the quirks are properly applied in the later init time. Reported-and-tested-by: NAlexey Fisher <bug-track@fisher-privat.net> Cc: <stable@kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 08 11月, 2011 11 次提交
-
-
由 Takashi Iwai 提交于
Providing a pincfg fix for VAIO-TT with ALC889 codec to work with the auto-parser, and drop the static configuration. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Now that model=ultra is supported well by the auto-parser, we can get rid of the whole alc262_quirks.c and its related codes. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
A machine like Q1-ultra which has only a single HP but no mic-jack, we can re-task the headhpone as an external mic jack. This was done formerly in ALC262 model=ultra quirk, and now the auto-parser supports this mode. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Now most of ALC262 stuff has been moved to the auto-parser, and no longer need for keeping model=basic. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Both entries for ALC262 model=hippo work well with the auto-parser and the default BIOS setup. No static configs are needed, so drop them. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
This model (actually BenQ Joybook) works fine with the default auto-parser and the BIOS setup. Just drop the static quirks. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
It works well with the auto-parse and the default BIOS setup when an additional COEF setup (for benq) is used. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
The conversion from ALC262 model=benq and model=benq-t31 static configs to auto-parser requires the manual COEF setups for corresponding models. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
The static quirks for ALC262 Lenovo 3000 can be covered by the auto- parser with a fixup of the mic-pin to VREF50 and the additional COEF verb. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
This laptop works also fine with the auto-parser and the BIOS setup. A good boy. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
This laptop works fine with the current auto-parser and the BIOS setup, so let's drop the static configuration. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-