- 03 1月, 2006 40 次提交
-
-
由 Takashi Iwai 提交于
Modules: HWDEP Midlevel,ALSA Core,PCM Midlevel,Timer Midlevel Optimize the code when compiled without CONFIG_PROC_FS. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Kyle Moffett 提交于
Modules: PPC PMAC driver The audio chip in my Spring 2005 17' PowerBook was incorrectly recognized as an AWACS chip. This adds the chip ID to the snd_powermac driver such that it is recognized as a Toonie (I don't know if that's correct, but it's the only one that makes it work at all). and sorts the ID lists numerically. NOTE: This chip is only minimally supported at this point; it has system beep support and very low volume speaker output, and that's about it. Signed-off-by: NKyle Moffett <mrmacman_g4@mac.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Modules: AD1848 driver Fix compilation without CONFIG_PM. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Matt Porter 提交于
Modules: HDA Codec driver - Explictly set pin control as input for all input pins - Fix bug in 922x mixer (no mute on adc0vol) - Remove broken ch_mode control - Add support for jack retasking mixer controls to use rear line and mic as surround outputs - Add board tables to support autodetect and pin config defaults for systems with broken bioses - Add support for several Intel mobos - Add support for DFI mobo with reference boards attached (gets rid of compile time switch to use reference boards) Signed-off-by: NMatt Porter <mporter@embeddedalley.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Randy Dunlap 提交于
Modules: Sound Core,Generic drivers AC97 Kconfig entries broke the ALSA device drivers menu, so move them to a location where that won't happen, enabling all device sub-menus to be presented together. Fixed for the latest ALSA tree by Takashi Iwai <tiwai@suse.de>. Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Matt Porter 提交于
Modules: HDA Intel driver The probe_mask module parameter comment notes that the intended default is -1. Fix it to be so, otherwise all codecs are skipped and init fails. Signed-off-by: NMatt Porter <mporter@embeddedalley.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Jaroslav Kysela 提交于
Modules: ENS1370/1+ driver - spdif module option: some hardware revisions are without spdif output - lineio module option: force shared line in / rear out jack settings Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Matthew Garrett 提交于
Modules: AC97 Codec The following patch adds some extra IDs for the list of hardware which should have headphone line sense enabled by default. Signed-off-by: NMatthew Garrett <mjg59@srcf.ucam.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Modules: HDA Codec driver Fixed the swapped surround/CLFE on 3stack mode of AD1988. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Modules: HDA Codec driver Fix/enhance AD1988 support code. - Fix for h/w bug of AD1988A rev 2 - The BIOS auto-configuration is added and used as fallback Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Modules: HDA Codec driver Fix the channel mode helper (for put callback). Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Modules: HDA Intel driver - Use the position buffer for obtaining the current DMA position as default. This seems more stable than others. - Add probe_mask module option (mainly for test boards with multiple codecs). Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Libin Yang 提交于
Modules: HDA Codec driver This patch is to fix the problem of calculating the nid incorrectly when auto-probe for ALC880. The problem to be fixed often behaves with such words when using dmesg, 'num_steps = 0 for NID=0x8' when auto-probe for ALC880. The patch contains: - alsa-kernel/pci/hda/patch_realtek.c: replace 'alc880_dac_to_idx' with 'alc880_idx_to_dac' in function 'alc880_auto_fill_dac_nids()' Signed-off-by: NLibin Yang <libin.yang@intel.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Adrian Bunk 提交于
Modules: RawMidi Midlevel,HDA generic driver This patch contains the following possible cleanups: - pci/hda/hda_proc.c should #include 'hda_local.h' for including the prototype of it's global function snd_hda_codec_proc_new() - core/rawmidi.c: make the needlessly global and EXPORT_SYMBOL'ed function snd_rawmidi_info() static Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Modules: ALSA Core Fix missing include <linux/device.h> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Modules: ICE1712 driver Fix the inverted switch of 'Front Digital Input' of Terratec DMX 6Fire. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Clemens Ladisch 提交于
Modules: USB generic driver Somebody at Edirol fucked up and released a new revision of the UA-20 without class-specific descriptors, so now we have to hard-code the sample format. Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
-
由 Takashi Iwai 提交于
Modules: HDA Codec driver Fix AD1988 support. As default, 6stack model is used. Still no auto-BIOS setup is implemented. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Modules: HDA generic driver Allocate connection lists dynamically in generic parser. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Modules: HDA Codec driver,HDA generic driver - Fix connection list parsing (with ranged flag). - Increase the max number of connections - Introduce widget capabilities cache - Power up/down widgets at init, suspend and resume Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Clemens Ladisch 提交于
Modules: RawMidi Midlevel When the output buffer size is changed, runtime->avail must be adjusted to the new size; otherwise, draining of a bigger buffer would appear to fail because avail does not reach buffer_size. Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
-
由 Clemens Ladisch 提交于
Modules: ALSA Core,Memalloc module,ALSA sequencer With dynamic minor numbers, we can increase the number of sound cards. This requires that the sequencer client numbers of some kernel drivers are allocated dynamically, too. Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
-
由 Clemens Ladisch 提交于
Modules: ALSA sequencer,Generic drivers To allow increasing the maximum number of sound cards, we have to limit the number of sequencer clients per card because client numbers are still allocated statically. Reducing the number of clients to four limits the number of sequencer MIDI ports to 1024 per card. Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
-
由 Clemens Ladisch 提交于
Modules: ALSA Core,ALSA Minor Numbers Add an option to allocate device file minor numbers dynamically. Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
-
由 Clemens Ladisch 提交于
Instead of storing the pointers to the device-specific structures in an array, put them into the struct snd_minor, and look them up dynamically. This makes the device type modules independent of the minor number encoding. Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
-
由 Clemens Ladisch 提交于
Modules: ALSA Core Store the snd_minor structure pointers in one array instead of using a separate list for each card. This simplifies the mapping from device files to minor struct by removing the need to know about the encoding of the card number in the minor number. Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
-
由 Clemens Ladisch 提交于
Instead of a comment string, store the device type in the snd_minor structure. This makes snd_minor more flexible, and has the nice side effect that we don't need anymore to create a separate snd_minor template for registering a device but can pass the file_operations directly to snd_register_device(). Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
-
由 Clemens Ladisch 提交于
Modules: RawMidi Midlevel In snd_rawmidi_info_select(), check that the device identified by the passed device number actually exists. Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
-
由 Clemens Ladisch 提交于
Modules: CS5535 driver Move the #include of <sound/driver.h> to the top which is required for compilation on earlier kernels. Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
-
由 Takashi Iwai 提交于
Modules: CS4231 driver Fix a compile warning (unused variable). Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Fix possible races in timer callbacks. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Jaroslav Kysela 提交于
Modules: Intel8x0 driver Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
Modules: CS4231 driver,CS4236+ driver Add CS4232 PnP BIOS support. Still experimental. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Modules: CS4231 driver Use mce_down() again in the resume callback. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Add error messages in the critial error path to be more verbose. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Modules: AD1816A driver Merge ad1816a-lib module to ad1816. There is no more reason to split. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Remove the obsolete snd_card_generic_dev(). CONFIG_SND_GENERIC_DRIVER is also removed from Kconfig. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Modules: ARM Remove the obsolete SND_GENERIC_DRIVER from arm/Kconfig. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Modules: SA11xx UDA1341 driver Rewrite the probe/remove with platform_device. Fix PM support, too. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Modules: ARM AACI PL041 driver,ARM PXA2XX driver Fix PM support of aaci and pxa2xx drivers. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-