- 05 5月, 2015 5 次提交
-
-
由 David Ahern 提交于
c0adf54a introduced new sparse warnings: CHECK /home/dahern/kernels/linux.git/net/rds/ib_cm.c net/rds/ib_cm.c:191:34: warning: incorrect type in initializer (different base types) net/rds/ib_cm.c:191:34: expected unsigned long long [unsigned] [usertype] dp_ack_seq net/rds/ib_cm.c:191:34: got restricted __be64 <noident> net/rds/ib_cm.c:194:51: warning: cast to restricted __be64 The temporary variable for sequence number should have been declared as __be64 rather than u64. Make it so. Signed-off-by: NDavid Ahern <david.ahern@oracle.com> Cc: shamir rabinovitch <shamir.rabinovitch@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
This reverts commit 8d7d9cca. Now that the necessary infrastructure is really all there in the tree, we can put this change back in. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kamlakant Patel 提交于
When smsc911x uses GPIO as the interrupt controller, and if both are loaded as modules, we get following error: "smsc911x: Could not allocate irq resource" This issue is because of smsc911x using platform_get_resource to get device tree based irq resource. commit "9ec36caf (of/irq: do irq resolution in platform_get_irq)" and commit "7085a7 (drivers: platform: parse IRQ flags from resources)" add support in platform_get_irq to resolve irq and irq_flags respectively for both modern device tree and legacy static platform data platforms. Modify smsc911x driver to use platform_get_irq to pick up irq resource correctly and use irq_get_trigger_type to get the IRQ trigger flags. Signed-off-by: NKamlakant Patel <kamlakant.patel@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vlad Yasevich 提交于
The code in __netdev_upper_dev_link() has an over-stringent loop detection logic that actually prevents valid configurations from working correctly. In particular, the logic returns an error if an upper device is already in the list of all upper devices for a given dev. This particular check seems to be a overzealous as it disallows perfectly valid configurations. For example: # ip l a link eth0 name eth0.10 type vlan id 10 # ip l a dev br0 typ bridge # ip l s eth0.10 master br0 # ip l s eth0 master br0 <--- Will fail If you switch the last two commands (add eth0 first), then both will succeed. If after that, you remove eth0 and try to re-add it, it will fail! It appears to be enough to simply check adj_list to keeps things safe. I've tried stacking multiple devices multiple times in all different combinations, and either rx_handler registration prevented the stacking of the device linking cought the error. Signed-off-by: NVladislav Yasevich <vyasevic@redhat.com> Acked-by: NJiri Pirko <jiri@resnulli.us> Acked-by: NVeaceslav Falico <vfalico@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tilman Schmidt 提交于
As German phone operators are discontinuing ISDN service, neither Hansjörg nor I will be able to maintain the Gigaset ISDN drivers any longer. Paul Bolle offered to step into the breach for odd fixes. Signed-off-by: NTilman Schmidt <tilman@imap.cc> Acked-by: NPaul Bolle <pebolle@tiscali.nl> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 5月, 2015 12 次提交
-
-
由 Vlad Yasevich 提交于
When a macvlan device is placed in promiscuous mode, it currently just sets it's multicast mask to permissive, but doesn't change the state of the lower device. As a result, not all multicast traffic can be received on such device. Additionally, none of a vlan traffic can be received on such device as well. This patch propagates the promiscuous mode setting to lower device so that lower device may receive all packets that macvlan may be interested in. Signed-off-by: NVladislav Yasevich <vyasevic@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
This reverts commit c243d7e2. That patch is solving a non-existant problem while creating a real problem. Just because a socket is allocated in the init name space doesn't mean that it gets hashed in the init name space. When we unhash it the name space must be the same as the one we had when we hashed it. So this patch is completely bogus and causes socket leaks. Reported-by: NAndrey Wagin <avagin@gmail.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Alexander Duyck says: ==================== Clean-up some bits related to netpoll This patch set cleans up some minor items related to netpoll. The first patch addresses an Rx clean-up bug that is triggered due to an assumption that napi->poll wouldn't be called with a budget of 0. The other two patches address dev_kfree_skb being called in the xmit path which isn't valid since netpoll will call ndo_start_xmit with IRQs disabled. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
With netpoll making use of the transmit function it is possible for the ndo_start_xmit function to be called with irqs disabled. As such we need to use dev_kfree_skb_any in the Tx cleanup path for frames that are dropped. Signed-off-by: NAlexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
The function r8169_csum_workaround is called in the ndo_start_xmit path of the r8169 driver. As such it should not be using dev_kfree_skb as it is not irq safe, so instead we should be using dev_kfree_skb_any for freeing in the dropped path, and dev_consume_skb_any for any frames that were transmitted. Signed-off-by: NAlexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
The netpoll path will call napi->poll with a budget of 0 in order to clean the Tx rings only. This change updates the fm10k driver so that it will correctly support that instead of cleaning 1 Rx frame if a budget of 0 is received. Signed-off-by: NAlexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vivien Didelot 提交于
Add the missing unregister for the mv88e6352_switch_driver. Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Merge tag 'linux-can-fixes-for-4.1-20150501' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== this is a pull request of a single patch for net/master. The patch is contributed by Jeppe Ledet-Pedersen, it fixes the extended frame handling in the xilinx driver. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Paul Gortmaker 提交于
This file is built off of a tristate Kconfig option and also contains modular function calls so it should explicitly include module.h to avoid compile breakage during header shuffles done in the future. Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: netdev@vger.kernel.org Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 shamir rabinovitch 提交于
rdma_conn_param private data is copied using memcpy after headers such as cma_hdr (see cma_resolve_ib_udp as example). so the start of the private data is aligned to the end of the structure that come before. if this structure end with u32 the meaning is that the start of the private data will be 4 bytes aligned. structures that use u8/u16/u32/u64 are naturally aligned but in case the structure start is not 8 bytes aligned, all u64 members of this structure will not be aligned. to solve this issue we must use special macros that allow unaligned access to those unaligned members. Addresses the following kernel log seen when attempting to use RDMA: Kernel unaligned access at TPC[10507a88] rds_ib_cm_connect_complete+0x1bc/0x1e0 [rds_rdma] Acked-by: NChien Yen <chien.yen@oracle.com> Signed-off-by: Nshamir rabinovitch <shamir.rabinovitch@oracle.com> [Minor tweaks for top of tree by:] Signed-off-by: NDavid Ahern <david.ahern@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
We currently limit the hash table size to 64K which is very bad as even 10 years ago it was relatively easy to generate millions of sockets. Since the hash table is naturally limited by memory allocation failure, we don't really need an explicit limit so this patch removes it. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Acked-by: NThomas Graf <tgraf@noironetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Under presence of TSO/GSO/GRO packets, codel at low rates can be quite useless. In following example, not a single packet was ever dropped, while average delay in codel queue is ~100 ms ! qdisc codel 0: parent 1:12 limit 16000p target 5.0ms interval 100.0ms Sent 134376498 bytes 88797 pkt (dropped 0, overlimits 0 requeues 0) backlog 13626b 3p requeues 0 count 0 lastcount 0 ldelay 96.9ms drop_next 0us maxpacket 9084 ecn_mark 0 drop_overlimit 0 This comes from a confusion of what should be the minimal backlog. It is pretty clear it is not 64KB or whatever max GSO packet ever reached the qdisc. codel intent was to use MTU of the device. After the fix, we finally drop some packets, and rtt/cwnd of my single TCP flow are meeting our expectations. qdisc codel 0: parent 1:12 limit 16000p target 5.0ms interval 100.0ms Sent 102798497 bytes 67912 pkt (dropped 1365, overlimits 0 requeues 0) backlog 6056b 3p requeues 0 count 1 lastcount 1 ldelay 36.3ms drop_next 0us maxpacket 10598 ecn_mark 0 drop_overlimit 0 Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Kathleen Nichols <nichols@pollere.com> Cc: Dave Taht <dave.taht@gmail.com> Cc: Van Jacobson <vanj@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 5月, 2015 6 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) Receive packet length needs to be adjust by 2 on RX to accomodate the two padding bytes in altera_tse driver. From Vlastimil Setka. 2) If rx frame is dropped due to out of memory in macb driver, we leave the receive ring descriptors in an undefined state. From Punnaiah Choudary Kalluri 3) Some netlink subsystems erroneously signal NLM_F_MULTI. That is only for dumps. Fix from Nicolas Dichtel. 4) Fix mis-use of raw rt->rt_pmtu value in ipv4, one must always go via the ipv4_mtu() helper. From Herbert Xu. 5) Fix null deref in bridge netfilter, and miscalculated lengths in jump/goto nf_tables verdicts. From Florian Westphal. 6) Unhash ping sockets properly. 7) Software implementation of BPF divide did 64/32 rather than 64/64 bit divide. The JITs got it right. Fix from Alexei Starovoitov. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (30 commits) ipv4: Missing sk_nulls_node_init() in ping_unhash(). net: fec: Fix RGMII-ID mode net/mlx4_en: Schedule napi when RX buffers allocation fails netxen_nic: use spin_[un]lock_bh around tx_clean_lock net/mlx4_core: Fix unaligned accesses mlx4_en: Use correct loop cursor in error path. cxgb4: Fix MC1 memory offset calculation bnx2x: Delay during kdump load net: Fix Kernel Panic in bonding driver debugfs file: rlb_hash_table net: dsa: Fix scope of eeprom-length property net: macb: Fix race condition in driver when Rx frame is dropped hv_netvsc: Fix a bug in netvsc_start_xmit() altera_tse: Correct rx packet length mlx4: Fix tx ring affinity_mask creation tipc: fix problem with parallel link synchronization mechanism tipc: remove wrong use of NLM_F_MULTI bridge/nl: remove wrong use of NLM_F_MULTI bridge/mdb: remove wrong use of NLM_F_MULTI net: sched: act_connmark: don't zap skb->nfct trivial: net: systemport: bcmsysport.h: fix 0x0x prefix ...
-
由 Stefan Hajnoczi 提交于
Here the "other side" refers to the guest or host. Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Rusty Russell 提交于
With my job change kernel work will be "own time"; I'm keeping lguest and modules (and the virtio standards work), but virtio kernel has to go. This makes it clear that Michael is in charge. He's good, but having me watch over his shoulder won't help. Good luck Michael! Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client由 Linus Torvalds 提交于
Pull Ceph RBD fix from Sage Weil. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: rbd: end I/O the entire obj_request on error
-
由 David S. Miller 提交于
If we don't do that, then the poison value is left in the ->pprev backlink. This can cause crashes if we do a disconnect, followed by a connect(). Tested-by: NLinus Torvalds <torvalds@linux-foundation.org> Reported-by: NWen Xu <hotdog3645@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilya Dryomov 提交于
When we end I/O struct request with error, we need to pass obj_request->length as @nr_bytes so that the entire obj_request worth of bytes is completed. Otherwise block layer ends up confused and we trip on rbd_assert(more ^ (which == img_request->obj_request_count)); in rbd_img_obj_callback() due to more being true no matter what. We already do it in most cases but we are missing some, in particular those where we don't even get a chance to submit any obj_requests, due to an early -ENOMEM for example. A number of obj_request->xferred assignments seem to be redundant but I haven't touched any of obj_request->xferred stuff to keep this small and isolated. Cc: Alex Elder <elder@linaro.org> Cc: stable@vger.kernel.org # 3.10+ Reported-by: NShawn Edwards <lesser.evil@gmail.com> Reviewed-by: NSage Weil <sage@redhat.com> Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
-
- 01 5月, 2015 17 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs由 Linus Torvalds 提交于
Pull btrfs fixes from Chris Mason: "A few more btrfs fixes. These range from corners Filipe found in the new free space cache writeback to a grab bag of fixes from the list" * 'for-linus-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: btrfs_release_extent_buffer_page didn't free pages of dummy extent Btrfs: fill ->last_trans for delayed inode in btrfs_fill_inode. btrfs: unlock i_mutex after attempting to delete subvolume during send btrfs: check io_ctl_prepare_pages return in __btrfs_write_out_cache btrfs: fix race on ENOMEM in alloc_extent_buffer btrfs: handle ENOMEM in btrfs_alloc_tree_block Btrfs: fix find_free_dev_extent() malfunction in case device tree has hole Btrfs: don't check for delalloc_bytes in cache_save_setup Btrfs: fix deadlock when starting writeback of bg caches Btrfs: fix race between start dirty bg cache writeout and bg deletion
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux由 Linus Torvalds 提交于
Pull arm64 fixes from Will Deacon: "Not too much here, but we've addressed a couple of nasty issues in the dma-mapping code as well as adding the halfword and byte variants of load_acquire/store_release following on from the CSD locking bug that you fixed in the core. - fix perf devicetree warnings at probe time - fix memory leak in __dma_free() - ensure DMA buffers are always zeroed - show IRQ trigger in /proc/interrupts (for parity with ARM) - implement byte and halfword access for smp_{load_acquire,store_release}" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: perf: Fix the pmu node name in warning message arm64: perf: don't warn about missing interrupt-affinity property for PPIs arm64: add missing PAGE_ALIGN() to __dma_free() arm64: dma-mapping: always clear allocated buffers ARM64: Enable CONFIG_GENERIC_IRQ_SHOW_LEVEL arm64: add missing data types in smp_load_acquire/smp_store_release
-
由 Jeppe Ledet-Pedersen 提交于
Using IDR_SRR in RXFIFO_ID to test for the presence of data is only valid for standard frames. For extended frames the bit is always 1 and IDR_RTR should be used instead. This patch switches the check to use CAN_RTR_FLAG which is correctly set when reading the ID. The patch also changes the DW1/DW2 to be read unconditionally, since this is necessary to remove the frame from the RXFIFO. Signed-off-by: NJeppe Ledet-Pedersen <jlp@gomspace.com> Acked-by: NKedareswara rao Appana <appanad@xilinx.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm由 Linus Torvalds 提交于
Pull power management and ACPI fixes from Rafael Wysocki: "Three regression fixes this time, one for a recent regression in the cpuidle core affecting multiple systems, one for an inadvertently added duplicate typedef in ACPICA that breaks compilation with GCC 4.5 and one for an ACPI Smart Battery Subsystem driver regression introduced during the 3.18 cycle (stable-candidate). Specifics: - Fix for a regression in the cpuidle core introduced by one of the recent commits in the clockevents_notify() removal series that put a call to a function which had to be executed with disabled interrupts into a code path running with enabled interrupts (Rafael J Wysocki) - Fix for a build problem in ACPICA (with GCC 4.5) introduced by one of the recent ACPICA tools commits that added a duplicate typedef to one of the ACPICA's header files by mistake (Olaf Hering) - Fix for a regression in the ACPI SBS (Smart Battery Subsystem) driver introduced during the 3.18 development cycle causing the smart battery manager to be marked as not present when it should be marked as present (Chris Bainbridge)" * tag 'pm+acpi-4.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpuidle: Run tick_broadcast_exit() with disabled interrupts ACPI / SBS: Enable battery manager when present ACPICA: remove duplicate u8 typedef
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound由 Linus Torvalds 提交于
Pull sound fixes from Takashi Iwai: "One nice fix is Peter's patch to make the old good SB Audigy PCI to work with 32bit DMA instead of 31bit. This allows the MIDI synth running on modern machines again. Along with it, a few fixes for emu10k1 have merged. In ASoC side, there is one fix in the common code, but it's just trivial additions of static inline functions for CONFIG_PM=n. The rest are various device-specific small fixes. Last but not least, a few HD-audio fixes are included, as usual, too" * tag 'sound-4.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (23 commits) ASoC: rt5677: fixed wrong DMIC ref clock ALSA: emu10k1: Emu10k2 32 bit DMA mode ALSA: emux: Fix mutex deadlock in OSS emulation ASoC: Update email-id of Rajeev Kumar ASoC: rt5645: Fix mask for setting RT5645_DMIC_2_DP_GPIO12 bit ALSA: hda - Fix missing va_end() call in snd_hda_codec_pcm_new() ALSA: emux: Fix mutex deadlock at unloading ALSA: emu10k1: Fix card shortname string buffer overflow ALSA: hda - Add mute-LED mode control to Thinkpad ALSA: hda - Fix mute-LED fixed mode ALSA: hda - Fix click noise at start on Dell XPS13 ASoC: rt5645: Add ACPI match ID ASoC: rt5677: add register patch for PLL ASoC: Intel: fix the makefile for atom code ASoC: dapm: Enable autodisable on SOC_DAPM_SINGLE_TLV_AUTODISABLE ASoC: add static inline funcs to fix a compiling issue ASoC: Intel: sst_byt: remove kfree for memory allocated with devm_kzalloc ASoC: samsung: s3c24xx-i2s: Fix return value check in s3c24xx_iis_dev_probe() ASoC: tfa9879: Fix return value check in tfa9879_i2c_probe() ASoC: fsl_ssi: Fix platform_get_irq() error handling ...
-
由 Markus Pargmann 提交于
RGMII-ID uses an internal delay within the transmitter or receiver. This feature is phy specific. The rest of the communication is normal RGMII. So the fec driver has to check for all RGMII modes, not only 'PHY_INTERFACE_MODE_RGMII'. Signed-off-by: NMarkus Pargmann <mpa@pengutronix.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ido Shamay 提交于
When system is out of memory, refilling of RX buffers fails while the driver continue to pass the received packets to the kernel stack. At some point, when all RX buffers deplete, driver may fall into a sleep, and not recover when memory for new RX buffers is once again availible. This is because hardware does not have valid descriptors, so no interrupt will be generated for the driver to return to work in napi context. Fix it by schedule the napi poll function from stats_task delayed workqueue, as long as the allocations fail. Signed-off-by: NIdo Shamay <idos@mellanox.com> Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tony Camuso 提交于
While testing this driver with DEBUG_LOCKDEP and DEBUG_SPINLOCK enabled did not produce any traces, it would be more prudent in the case of tx_clean_lock to use spin_[un]lock_bh, since this lock is manipulated in both the process and softirq contexts. This patch was tested for functionality and regressions with netperf and DEBUG_LOCKDEP and DEBUG_SPINLOCK enabled. Signed-off-by: NTony Camuso <tcamuso@redhat.com> Acked-by: NNeil Horman <nhorman@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Ahern 提交于
Addresses the following kernel logs seen during boot: Kernel unaligned access at TPC[100ee150] mlx4_QUERY_HCA+0x80/0x248 [mlx4_core] Kernel unaligned access at TPC[100f071c] mlx4_QUERY_ADAPTER+0x100/0x12c [mlx4_core] Kernel unaligned access at TPC[100f071c] mlx4_QUERY_ADAPTER+0x100/0x12c [mlx4_core] Kernel unaligned access at TPC[100f071c] mlx4_QUERY_ADAPTER+0x100/0x12c [mlx4_core] Kernel unaligned access at TPC[100f071c] mlx4_QUERY_ADAPTER+0x100/0x12c [mlx4_core] Signed-off-by: NDavid Ahern <david.ahern@oracle.com> Acked-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Benjamin Poirier 提交于
Signed-off-by: NBenjamin Poirier <bpoirier@suse.de> Fixes: 9e311e77 ("net/mlx4_en: Use affinity hint") Acked-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rafael J. Wysocki 提交于
-
由 Takashi Iwai 提交于
Merge tag 'asoc-v4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v4.1 A few fixes for v4.1, none earth shattering and mostly driver related except for one change to fix !PM builds for Intel platforms which is done by adding stubs in the core so other platforms don't run into the same issue.
-
git://git.kernel.org/pub/scm/virt/kvm/kvm由 Linus Torvalds 提交于
Pull kvm changes from Paolo Bonzini: "Remove from guest code the handling of task migration during a pvclock read; instead use the correct protocol in KVM. This removes the need for task migration notifiers in core scheduler code" [ The scheduler people really hated the migration notifiers, so this was kind of required - Linus ] * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: x86: pvclock: Really remove the sched notifier for cross-cpu migrations kvm: x86: fix kvmclock update protocol
-
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm由 Linus Torvalds 提交于
Pull device mapper bugfixes from Mike Snitzer: "Fix two bugs in the request-based DM blk-mq support that was added during the 4.1 merge" * tag 'dm-4.1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm: fix free_rq_clone() NULL pointer when requeueing unmapped request dm: only initialize the request_queue once
-
由 David Howells 提交于
Change default key details to be more obviously unspecified. Reported-by: NLinus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NDavid Howells <dhowells@redhat.com> Acked-by: NJames Morris <james.l.morris@oracle.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty由 Linus Torvalds 提交于
Pull tty/serial fixes from Greg KH: "Here are some small tty/serial driver fixes for 4.1-rc2. They include some minor fixes that resolve reported issues, and a new device quirk. All have been in linux-next succesfully" * tag 'tty-4.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: 8250_pci: Add support for 16 port Exar boards serial: samsung: fix serial console break tty/serial: at91: maxburst was missing for dma transfers serial: of-serial: Remove device_type = "serial" registration serial: xilinx: Use platform_get_irq to get irq description structure serial: core: Fix kernel-doc build warnings tty: Re-add external interface for tty_set_termios()
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb由 Linus Torvalds 提交于
Pull USB fixes from Greg KH: "Here are a number of small USB fixes for 4.2-rc2. They revert one problem patch, fix some minor things, and add some new quirks for "broken" devices. All have been in linux-next successfully" * tag 'usb-4.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: cdc-acm: prevent infinite loop when parsing CDC headers. Revert "usb: host: ehci-msm: Use devm_ioremap_resource instead of devm_ioremap" usb: chipidea: otg: remove mutex unlock and lock while stop and start role uas: Set max_sectors_240 quirk for ASM1053 devices uas: Add US_FL_MAX_SECTORS_240 flag uas: Allow uas_use_uas_driver to return usb-storage flags
-