- 28 10月, 2013 4 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull perf fixes from Ingo Molnar: "The tree contains three fixes: - Two tooling fixes - Reversal of the new 'MMAP2' extended mmap record ABI, introduced in this merge window. (Patches were proposed to fix it but it was all a bit late and we felt it's safer to just delay the ABI one more kernel release and do it right)" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf: Disable PERF_RECORD_MMAP2 support perf scripting perl: Fix build error on Fedora 12 perf probe: Fix to initialize fname always before use it
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull locking fix from Ingo Molnar: "This tree fixes a boot crash in CONFIG_DEBUG_MUTEXES=y kernels, on kernels built with GCC 3.x (there are still such distros)" Side note: it's not just a fix for old gcc versions, it's also removing an incredibly broken/subtle check that LLVM had issues with, and that made no sense. * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: mutex: Avoid gcc version dependent __builtin_constant_p() usage
-
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending由 Linus Torvalds 提交于
Pull SCSI target fixes from Nicholas Bellinger: "Here are the outstanding target pending fixes for v3.12-rc7. This includes a number of EXTENDED_COPY related fixes as a result of Thomas and Doug's continuing testing and feedback. Also included is an important vhost/scsi fix that addresses a long standing issue where the 'write' parameter for get_user_pages_fast() was incorrectly set for virtio-scsi WRITEs -> DMA_TO_DEVICE, and not for virtio-scsi READs -> DMA_FROM_DEVICE. This resulted in random userspace segfaults and other unpleasantness on KVM host, and unfortunately has been an issue since the initial merge of vhost/scsi in v3.6. This patch is CC'ed to stable, along with two other less critical items" * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: vhost/scsi: Fix incorrect usage of get_user_pages_fast write parameter target/pscsi: fix return value check target: Fail XCOPY for non matching source + destination block_size target: Generate failure for XCOPY I/O with non-zero scsi_status target: Add missing XCOPY I/O operation sense_buffer iser-target: check device before dereferencing its variable target: Return an error for WRITE SAME with ANCHOR==1 target: Fix assignment of LUN in tracepoints target: Reject EXTENDED_COPY when emulate_3pc is disabled target: Allow non zero ListID in EXTENDED_COPY parameter list target: Make target_do_xcopy failures return INVALID_PARAMETER_LIST
-
git://git.infradead.org/users/vkoul/slave-dma由 Linus Torvalds 提交于
Pull slave-dmaengine fixes from Vinod Koul: "Here is the late fixes pull request for dmaengine while you fly back from KS. We have a new dmaengine ML hosted by vger so a patch for that along with addition of Dave as driver mainatainer for ioat. Other fixes are memeory leak fixes on edma driver, small fixes on rcar-hpbdma driver by Sergei" * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: edma: fix another memory leak dma: edma: Fix memory leak MAINTAINERS: add to ioatdma maintainer list MAINTAINERS: add the new dmaengine mailing list
-
- 26 10月, 2013 6 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm由 Linus Torvalds 提交于
Pull ACPI and power management fixes from "These fix two bugs in the intel_pstate driver, a hibernate bug leading to nasty resume failures sometimes and acpi-cpufreq initialization bug that causes problems to happen during module unload when intel_pstate is in use. Specifics: - Fix for rounding errors in intel_pstate causing CPU utilization to be underestimated from Brennan Shacklett. - intel_pstate fix to always use the correct max pstate value when computing the min pstate from Dirk Brandewie. - Hibernation fix for deadlocking resume in cases when the probing of the device containing the image is deferred from Russ Dill. - acpi-cpufreq fix to prevent the module from staying in memory when the driver cannot be registered and then attempting to unregister things that have never been registered on exit" * tag 'pm+acpi-3.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: acpi-cpufreq: Fail initialization if driver cannot be registered PM / hibernate: Move software_resume to late_initcall_sync intel_pstate: Correct calculation of min pstate value intel_pstate: Improve accuracy by not truncating until final result
-
git://git.infradead.org/linux-mtd由 Linus Torvalds 提交于
Pull final mtd fixes from Brian Norris: "A few more last-minute regression fixes, prepared jointly by me and David Woodhouse: - Revert pxa3xx to its old name to avoid breaking existing 'mtdparts=' boot strings. - Return GPMI NAND to its legacy ECC layout for backwards compatibility. We will revisit this in 3.13. A note from David on the latter fix: 'This leaves a harmless cosmetic warning about an unused function. At this point in the cycle I really don't care.'" * tag 'for-linus-20131025' of git://git.infradead.org/linux-mtd: mtd: gpmi: fix ECC regression mtd: nand: pxa3xx: Fix registered MTD name
-
由 Nicholas Bellinger 提交于
This patch addresses a long-standing bug where the get_user_pages_fast() write parameter used for setting the underlying page table entry permission bits was incorrectly set to write=1 for data_direction=DMA_TO_DEVICE, and passed into get_user_pages_fast() via vhost_scsi_map_iov_to_sgl(). However, this parameter is intended to signal WRITEs to pinned userspace PTEs for the virtio-scsi DMA_FROM_DEVICE -> READ payload case, and *not* for the virtio-scsi DMA_TO_DEVICE -> WRITE payload case. This bug would manifest itself as random process segmentation faults on KVM host after repeated vhost starts + stops and/or with lots of vhost endpoints + LUNs. Cc: Stefan Hajnoczi <stefanha@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Asias He <asias@redhat.com> Cc: <stable@vger.kernel.org> # 3.6+ Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-
由 Wei Yongjun 提交于
In case of error, the function scsi_host_lookup() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: <stable@vger.kernel.org> Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs由 Linus Torvalds 提交于
Pull vfs fixes (try two) from Al Viro: "nfsd performance regression fix + seq_file lseek(2) fix" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: seq_file: always update file->f_pos in seq_lseek() nfsd regression since delayed fput()
-
由 David Woodhouse 提交于
The "legacy" ECC layout used until 3.12-rc1 uses all the OOB area by computing the ECC strength and ECC step size ourselves. Commit 2febcdf8 ("mtd: gpmi: set the BCHs geometry with the ecc info") makes the driver use the ECC info (ECC strength and ECC step size) provided by the MTD code, and creates a different NAND ECC layout for the BCH, and use the new ECC layout. This causes a regression: We can not mount the ubifs which was created by the old NAND ECC layout. This patch fixes this issue by reverting to the legacy ECC layout. We will probably introduce a new device-tree property to indicate that the new ECC layout can be used. For now though, for the imminent 3.12 release, we just unconditionally revert to the 3.11 behaviour. This leaves a harmless cosmetic warning about an unused function. At this point in the cycle I really don't care. Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com> Signed-off-by: NBrian Norris <computersforpeace@gmail.com> Acked-by: NHuang Shijie <b32955@freescale.com> Acked-by: NMarek Vasut <marex@denx.de> Tested-by: NMarek Vasut <marex@denx.de>
-
- 25 10月, 2013 9 次提交
-
-
由 Gu Zheng 提交于
This issue was first pointed out by Jiaxing Wang several months ago, but no further comments: https://lkml.org/lkml/2013/6/29/41 As we know pread() does not change f_pos, so after pread(), file->f_pos and m->read_pos become different. And seq_lseek() does not update file->f_pos if offset equals to m->read_pos, so after pread() and seq_lseek()(lseek to m->read_pos), then a subsequent read may read from a wrong position, the following program produces the problem: char str1[32] = { 0 }; char str2[32] = { 0 }; int poffset = 10; int count = 20; /*open any seq file*/ int fd = open("/proc/modules", O_RDONLY); pread(fd, str1, count, poffset); printf("pread:%s\n", str1); /*seek to where m->read_pos is*/ lseek(fd, poffset+count, SEEK_SET); /*supposed to read from poffset+count, but this read from position 0*/ read(fd, str2, count); printf("read:%s\n", str2); out put: pread: ck_netbios_ns 12665 read: nf_conntrack_netbios /proc/modules: nf_conntrack_netbios_ns 12665 0 - Live 0xffffffffa038b000 nf_conntrack_broadcast 12589 1 nf_conntrack_netbios_ns, Live 0xffffffffa0386000 So we always update file->f_pos to offset in seq_lseek() to fix this issue. Signed-off-by: NJiaxing Wang <hello.wjx@gmail.com> Signed-off-by: NGu Zheng <guz.fnst@cn.fujitsu.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Rafael J. Wysocki 提交于
Make acpi_cpufreq_init() return error codes when the driver cannot be registered so that the module doesn't stay useless in memory and so that acpi_cpufreq_exit() doesn't attempt to unregister things that have never been registered when the module is unloaded. Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM SoC fixes from Olof Johansson: "There's really only one bugfix in this branch, which is a fix for timers on the integrator platform. Since Linus Walleij is resurrecting support for the platform it seems valuable to get the fix into 3.12 even though the regression has been around a while. The rest are a handful of maintainers updates. If you prefer to hold those until 3.13 then just merge the first patch on the branch which is the fix" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: MAINTAINERS: Add maintainers entry for Rockchip SoCs MAINTAINERS: Tegra updates, and driver ownership MAINTAINERS: ARM: mvebu: add Sebastian Hesselbarth ARM: integrator: deactivate timer0 on the Integrator/CP
-
由 Linus Torvalds 提交于
Merge tag 'ecryptfs-3.12-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs Pull ecryptfs fixes from Tyler Hicks: "Two important fixes - Fix long standing memory leak in the (rarely used) public key support - Fix large file corruption on 32 bit architectures" * tag 'ecryptfs-3.12-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs: eCryptfs: fix 32 bit corruption issue ecryptfs: Fix memory leakage in keystore.c
-
由 Russ Dill 提交于
software_resume is being called after deferred_probe_initcall in drivers base. If the probing of the device that contains the resume image is deferred, and the system has been instructed to wait for it to show up, this wait will occur in software_resume. This causes a deadlock. Move software_resume into late_initcall_sync so that it happens after all the other late_initcalls. Signed-off-by: NRuss Dill <Russ.Dill@ti.com> Acked-by: NPavel Machek <Pavel@ucw.cz> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Ezequiel Garcia 提交于
In a recent commit: commit f455578d Author: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Date: Mon Aug 12 14:14:53 2013 -0300 mtd: nand: pxa3xx: Remove hardcoded mtd name There's no advantage in using a hardcoded name for the mtd device. Instead use the provided by the platform_device. The MTD name was changed to use the one provided by the platform_device. However, this can be problematic as some users want to set partitions using the kernel parameter 'mtdparts', where the name is needed. Therefore, to avoid regressions in users relying in 'mtdparts' we revert the change and use the previous one 'pxa3xx_nand-0'. While at it, let's put a big comment and prevent this change from happening ever again. Signed-off-by: NEzequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: NBrian Norris <computersforpeace@gmail.com>
-
由 Colin Ian King 提交于
Shifting page->index on 32 bit systems was overflowing, causing data corruption of > 4GB files. Fix this by casting it first. https://launchpad.net/bugs/1243636Signed-off-by: NColin Ian King <colin.king@canonical.com> Reported-by: NLars Duesing <lars.duesing@camelotsweb.de> Cc: stable@vger.kernel.org # v3.11+ Signed-off-by: NTyler Hicks <tyhicks@canonical.com>
-
由 Vinod Koul 提交于
commit 4b6271a6 fix a menory leak but one more existed in driver so fix that Signed-off-by: NVinod Koul <vinod.koul@intel.com>
-
由 Valentin Ilie 提交于
When it fails to allocate a slot, edesc should be free'd before return; Signed-off-by: NValentin Ilie <valentin.ilie@gmail.com> Signed-off-by: NVinod Koul <vinod.koul@intel.com>
-
- 24 10月, 2013 12 次提交
-
-
由 Nicholas Bellinger 提交于
This patch adds an explicit check + failure for XCOPY I/O to source + destination devices with a non-matching block_size. This limitiation is currently due to the fact that the scatterlist memory allocated for the XCOPY READ operation is passed zero-copy to the XCOPY WRITE operation. Reported-by: NThomas Glanzmann <thomas@glanzmann.de> Reported-by: NDouglas Gilbert <dgilbert@interlog.com> Cc: Thomas Glanzmann <thomas@glanzmann.de> Cc: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-
由 Nicholas Bellinger 提交于
This patch adds the missing non-zero se_cmd->scsi_status check required for local XCOPY I/O within target_xcopy_issue_pt_cmd() to signal an exception case failure. This will trigger the generation of SAM_STAT_CHECK_CONDITION status from within target_xcopy_do_work() process context code. Reported-by: NThomas Glanzmann <thomas@glanzmann.de> Reported-by: NDouglas Gilbert <dgilbert@interlog.com> Cc: Thomas Glanzmann <thomas@glanzmann.de> Cc: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-
由 Nicholas Bellinger 提交于
This patch adds the missing xcopy_pt_cmd->sense_buffer[] required for correctly handling CHECK_CONDITION exceptions within the locally generated XCOPY I/O path. Also update target_xcopy_read_source() + target_xcopy_setup_pt_cmd() to pass this buffer into transport_init_se_cmd() to correctly setup se_cmd->sense_buffer. Reported-by: NThomas Glanzmann <thomas@glanzmann.de> Reported-by: NDouglas Gilbert <dgilbert@interlog.com> Cc: Thomas Glanzmann <thomas@glanzmann.de> Cc: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-
git://neil.brown.name/md由 Linus Torvalds 提交于
Pull md bugfixes from Neil Brown: "Assorted md bug-fixes for 3.12. All tagged for -stable releases too" * tag 'md/3.12-fixes' of git://neil.brown.name/md: raid5: avoid finding "discard" stripe raid5: set bio bi_vcnt 0 for discard request md: avoid deadlock when md_set_badblocks. md: Fix skipping recovery for read-only arrays.
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi由 Linus Torvalds 提交于
Pull SCSI fixes from James Bottomley: "This is a set of two fixes which cause oopses (Buslogic, qla2xxx) and one fix which may cause a hang because of request miscounting (sd)" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: [SCSI] sd: call blk_pm_runtime_init before add_disk [SCSI] qla2xxx: Fix request queue null dereference. [SCSI] BusLogic: Fix an oops when intializing multimaster adapter
-
由 Vu Pham 提交于
This patch changes isert_connect_release() to correctly check for the existence struct isert_device *device before checking for isert_device->use_frwr. Signed-off-by: NVu Pham <vu@mellanox.com> Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-
由 Shaohua Li 提交于
SCSI discard will damage discard stripe bio setting, eg, some fields are changed. If the stripe is reused very soon, we have wrong bios setting. We remove discard stripe from hash list, so next time the strip will be fully initialized. Suitable for backport to 3.7+. Cc: <stable@vger.kernel.org> (3.7+) Signed-off-by: NShaohua Li <shli@fusionio.com> Signed-off-by: NNeilBrown <neilb@suse.de>
-
由 Shaohua Li 提交于
SCSI layer will add new payload for discard request. If two bios are merged to one, the second bio has bi_vcnt 1 which is set in raid5. This will confuse SCSI and cause oops. Suitable for backport to 3.7+ Cc: stable@vger.kernel.org (v3.7+) Reported-by: NJes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NShaohua Li <shli@fusionio.com> Signed-off-by: NNeilBrown <neilb@suse.de> Acked-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Bian Yu 提交于
When operate harddisk and hit errors, md_set_badblocks is called after scsi_restart_operations which already disabled the irq. but md_set_badblocks will call write_sequnlock_irq and enable irq. so softirq can preempt the current thread and that may cause a deadlock. I think this situation should use write_sequnlock_irqsave/irqrestore instead. I met the situation and the call trace is below: [ 638.919974] BUG: spinlock recursion on CPU#0, scsi_eh_13/1010 [ 638.921923] lock: 0xffff8800d4d51fc8, .magic: dead4ead, .owner: scsi_eh_13/1010, .owner_cpu: 0 [ 638.923890] CPU: 0 PID: 1010 Comm: scsi_eh_13 Not tainted 3.12.0-rc5+ #37 [ 638.925844] Hardware name: To be filled by O.E.M. To be filled by O.E.M./MAHOBAY, BIOS 4.6.5 03/05/2013 [ 638.927816] ffff880037ad4640 ffff880118c03d50 ffffffff8172ff85 0000000000000007 [ 638.929829] ffff8800d4d51fc8 ffff880118c03d70 ffffffff81730030 ffff8800d4d51fc8 [ 638.931848] ffffffff81a72eb0 ffff880118c03d90 ffffffff81730056 ffff8800d4d51fc8 [ 638.933884] Call Trace: [ 638.935867] <IRQ> [<ffffffff8172ff85>] dump_stack+0x55/0x76 [ 638.937878] [<ffffffff81730030>] spin_dump+0x8a/0x8f [ 638.939861] [<ffffffff81730056>] spin_bug+0x21/0x26 [ 638.941836] [<ffffffff81336de4>] do_raw_spin_lock+0xa4/0xc0 [ 638.943801] [<ffffffff8173f036>] _raw_spin_lock+0x66/0x80 [ 638.945747] [<ffffffff814a73ed>] ? scsi_device_unbusy+0x9d/0xd0 [ 638.947672] [<ffffffff8173fb1b>] ? _raw_spin_unlock+0x2b/0x50 [ 638.949595] [<ffffffff814a73ed>] scsi_device_unbusy+0x9d/0xd0 [ 638.951504] [<ffffffff8149ec47>] scsi_finish_command+0x37/0xe0 [ 638.953388] [<ffffffff814a75e8>] scsi_softirq_done+0xa8/0x140 [ 638.955248] [<ffffffff8130e32b>] blk_done_softirq+0x7b/0x90 [ 638.957116] [<ffffffff8104fddd>] __do_softirq+0xfd/0x330 [ 638.958987] [<ffffffff810b964f>] ? __lock_release+0x6f/0x100 [ 638.960861] [<ffffffff8174a5cc>] call_softirq+0x1c/0x30 [ 638.962724] [<ffffffff81004c7d>] do_softirq+0x8d/0xc0 [ 638.964565] [<ffffffff8105024e>] irq_exit+0x10e/0x150 [ 638.966390] [<ffffffff8174ad4a>] smp_apic_timer_interrupt+0x4a/0x60 [ 638.968223] [<ffffffff817499af>] apic_timer_interrupt+0x6f/0x80 [ 638.970079] <EOI> [<ffffffff810b964f>] ? __lock_release+0x6f/0x100 [ 638.971899] [<ffffffff8173fa6a>] ? _raw_spin_unlock_irq+0x3a/0x50 [ 638.973691] [<ffffffff8173fa60>] ? _raw_spin_unlock_irq+0x30/0x50 [ 638.975475] [<ffffffff81562393>] md_set_badblocks+0x1f3/0x4a0 [ 638.977243] [<ffffffff81566e07>] rdev_set_badblocks+0x27/0x80 [ 638.978988] [<ffffffffa00d97bb>] raid5_end_read_request+0x36b/0x4e0 [raid456] [ 638.980723] [<ffffffff811b5a1d>] bio_endio+0x1d/0x40 [ 638.982463] [<ffffffff81304ff3>] req_bio_endio.isra.65+0x83/0xa0 [ 638.984214] [<ffffffff81306b9f>] blk_update_request+0x7f/0x350 [ 638.985967] [<ffffffff81306ea1>] blk_update_bidi_request+0x31/0x90 [ 638.987710] [<ffffffff813085e0>] __blk_end_bidi_request+0x20/0x50 [ 638.989439] [<ffffffff8130862f>] __blk_end_request_all+0x1f/0x30 [ 638.991149] [<ffffffff81308746>] blk_peek_request+0x106/0x250 [ 638.992861] [<ffffffff814a62a9>] ? scsi_kill_request.isra.32+0xe9/0x130 [ 638.994561] [<ffffffff814a633a>] scsi_request_fn+0x4a/0x3d0 [ 638.996251] [<ffffffff813040a7>] __blk_run_queue+0x37/0x50 [ 638.997900] [<ffffffff813045af>] blk_run_queue+0x2f/0x50 [ 638.999553] [<ffffffff814a5750>] scsi_run_queue+0xe0/0x1c0 [ 639.001185] [<ffffffff814a7721>] scsi_run_host_queues+0x21/0x40 [ 639.002798] [<ffffffff814a2e87>] scsi_restart_operations+0x177/0x200 [ 639.004391] [<ffffffff814a4fe9>] scsi_error_handler+0xc9/0xe0 [ 639.005996] [<ffffffff814a4f20>] ? scsi_unjam_host+0xd0/0xd0 [ 639.007600] [<ffffffff81072f6b>] kthread+0xdb/0xe0 [ 639.009205] [<ffffffff81072e90>] ? flush_kthread_worker+0x170/0x170 [ 639.010821] [<ffffffff81748cac>] ret_from_fork+0x7c/0xb0 [ 639.012437] [<ffffffff81072e90>] ? flush_kthread_worker+0x170/0x170 This bug was introduce in commit 2e8ac303 (the first time rdev_set_badblock was call from interrupt context), so this patch is appropriate for 3.5 and subsequent kernels. Cc: <stable@vger.kernel.org> (3.5+) Signed-off-by: NBian Yu <bianyu@kedacom.com> Reviewed-by: NJianpeng Ma <majianpeng@gmail.com> Signed-off-by: NNeilBrown <neilb@suse.de>
-
由 Lukasz Dorau 提交于
Since: commit 7ceb17e8 md: Allow devices to be re-added to a read-only array. spares are activated on a read-only array. In case of raid1 and raid10 personalities it causes that not-in-sync devices are marked in-sync without checking if recovery has been finished. If a read-only array is degraded and one of its devices is not in-sync (because the array has been only partially recovered) recovery will be skipped. This patch adds checking if recovery has been finished before marking a device in-sync for raid1 and raid10 personalities. In case of raid5 personality such condition is already present (at raid5.c:6029). Bug was introduced in 3.10 and causes data corruption. Cc: stable@vger.kernel.org Signed-off-by: NPawel Baldysiak <pawel.baldysiak@intel.com> Signed-off-by: NLukasz Dorau <lukasz.dorau@intel.com> Signed-off-by: NNeilBrown <neilb@suse.de>
-
由 Dave Jiang 提交于
Signed-off-by: NDave Jiang <dave.jiang@intel.com> [djbw: add dmaengine list] Signed-off-by: NDan Williams <dan.j.williams@intel.com> Signed-off-by: NVinod Koul <vinod.koul@intel.com>
-
由 Vinod Koul 提交于
We have a new mailing list hosted by vger for dmaengine Acked-by: NDan Williams <dan.j.williams@intel.com> Signed-off-by: NVinod Koul <vinod.koul@intel.com>
-
- 23 10月, 2013 9 次提交
-
-
由 Aaron Lu 提交于
Sujit has found a race condition that would make q->nr_pending unbalanced, it occurs as Sujit explained: " sd_probe_async() -> add_disk() -> disk_add_event() -> schedule(disk_events_workfn) sd_revalidate_disk() blk_pm_runtime_init() return; Let's say the disk_events_workfn() calls sd_check_events() which tries to send test_unit_ready() and because of sd_revalidate_disk() trying to send another commands the test_unit_ready() might be re-queued as the tagged command queuing is disabled. So the race condition is - Thread 1 | Thread 2 sd_revalidate_disk() | sd_check_events() ...nr_pending = 0 as q->dev = NULL| scsi_queue_insert() blk_runtime_pm_init() | blk_pm_requeue_request() -> | nr_pending = -1 since | q->dev != NULL " The problem is, the test_unit_ready request doesn't get counted the first time it is queued, so the later decrement of q->nr_pending in blk_pm_requeue_request makes it unbalanced. Fix this by calling blk_pm_runtime_init before add_disk so that all requests initiated there will all be counted. Signed-off-by: NAaron Lu <aaron.lu@intel.com> Reported-and-tested-by: NSujit Reddy Thumma <sthumma@codeaurora.org> Cc: stable@vger.kernel.org Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
-
由 Chad Dupuis 提交于
If an invalid IOCB is returned on the response queue then the index into the request queue map could be invalid and could return to us a bogus value. This could cause us to try to deference an invalid pointer and cause an exception. If we encounter this condition, simply return as no context can be established for this response. Signed-off-by: NChad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux由 Linus Torvalds 提交于
Pull s390 fixes from Martin Schwidefsky: "Several last minute bug fixes. Two of them are on the larger side for rc7, the dasd format patch for older storage devices and the store-clock-fast patch where we have been to optimistic with an optimization" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/time: correct use of store clock fast s390/vmlogrdr: fix array access in vmlogrdr_open() s390/compat,signal: fix return value of copy_siginfo_(to|from)_user32() s390/dasd: check for availability of prefix command during format s390/mm,kvm: fix software dirty bits vs. kvm for old machines
-
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux由 Linus Torvalds 提交于
Pull thermal management fixes from Zhang Rui: "These includes several commits that are necessary to properly fix regression for TMU test MUX address setting after reset, for exynos thermal driver. Specifics: - fix a regression that the removal of setting a certain field at TMU configuration setting results in immediately shutdown after reset on Exynos4412 SoC. - revert a patch which tries to link the thermal_zone device and its hwmon node but breaks libsensors. - fix a deadlock/lockdep warning issue in x86_pkg_temp thermal driver, which can be reproduced on a buggy platform only. - fix ti-soc-thermal driver to fall back on bandgap reading when reading from PCB temperature sensor fails" * 'for-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: Revert "drivers: thermal: parent virtual hwmon with thermal zone" drivers: thermal: allow ti-soc-thermal run without pcb zone thermal: exynos: Provide initial setting for TMU's test MUX address at Exynos4412 thermal: exynos: Provide separate TMU data for Exynos4412 thermal: exynos: Remove check for thermal device pointer at exynos_report_trigger() Thermal: x86_pkg_temp: change spin lock
-
由 Randy Dunlap 提交于
Fix build error in asus_wmi.c when ASUS_WMI=y and ACPI_VIDEO=m by preventing that combination. drivers/built-in.o: In function `asus_wmi_probe': asus-wmi.c:(.text+0x65ddb4): undefined reference to `acpi_video_unregister' Signed-off-by: NRandy Dunlap <rdunlap@infradead.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Kent Overstreet 提交于
Signed-off-by: NKent Overstreet <kmo@daterainc.com> Cc: linux-stable <stable@vger.kernel.org> # >= v3.10 Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media由 Linus Torvalds 提交于
Pull media fixes from Mauro Carvalho Chehab: - Compilation fixes for GCC < 4.4.6 - one Kbuild dependency select fix (selecting videobuf on msi3101) - driver fixes on tda10071, e4000, msi3101, soc_camera, s5p-jpeg, saa7134 and adv7511 - some device quirks needed to make them work properly - some videobuf2 core regression fixes for some features used only on embedded drivers * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] saa7134: Fix crash when device is closed before streamoff [media] adv7511: fix error return code in adv7511_probe() [media] ths8200: fix compilation with GCC < 4.4.6 [media] ad9389b: fix compilation with GCC < 4.4.6 [media] adv7511: fix compilation with GCC < 4.4.6 [media] adv7842: fix compilation with GCC < 4.4.6 [media] s5p-jpeg: Initialize vfd_decoder->vfl_dir field [media] videobuf2-dc: Fix support for mappings without struct page in userptr mode [media] vb2: Allow queuing OUTPUT buffers with zeroed 'bytesused' [media] mx3-camera: locking cleanup in mx3_videobuf_queue() [media] sh_vou: almost forever loop in sh_vou_try_fmt_vid_out() [media] tda10071: change firmware download condition [media] msi3101: correct max videobuf2 alloc [media] Add HCL T12Rg-H to STK webcam upside-down table [media] msi3101: Kconfig select VIDEOBUF2_VMALLOC [media] msi3101: msi3101_ioctl_ops can be static [media] e4000: fix PLL calc bug on 32-bit arch [media] uvcvideo: quirk PROBE_DEF for Microsoft Lifecam NX-3000 [media] uvcvideo: quirk PROBE_DEF for Dell SP2008WFP monitor
-
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband由 Linus Torvalds 提交于
Pull infiniband bugfix from Roland Dreier: "Disable not-quite-ready userspace ABI for IB flow steering" * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/core: Temporarily disable create_flow/destroy_flow uverbs
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: "Sorry I let so much accumulate, I was in Buffalo and wanted a few things to cook in my tree for a while before sending to you. Anyways, it's a lot of little things as usual at this stage in the game" 1) Make bonding MAINTAINERS entry reflect reality, from Andy Gospodarek. 2) Fix accidental sock_put() on timewait mini sockets, from Eric Dumazet. 3) Fix crashes in l2tp due to mis-handling of ipv4 mapped ipv6 addresses, from François CACHEREUL. 4) Fix heap overflow in __audit_sockaddr(), from the eagle eyed Dan Carpenter. 5) tcp_shifted_skb() doesn't take handle FINs properly, from Eric Dumazet. 6) SFC driver bug fixes from Ben Hutchings. 7) Fix TX packet scheduling wedge after channel change in ath9k driver, from Felix Fietkau. 8) Fix user after free in BPF JIT code, from Alexei Starovoitov. 9) Source address selection test is reversed in __ip_route_output_key(), fix from Jiri Benc. 10) VLAN and CAN layer mis-size netlink attributes, from Marc Kleine-Budde. 11) Fix permission checks in sysctls to use current_euid() instead of current_uid(). From Eric W Biederman. 12) IPSEC policies can go away while a timer is still pending for them, add appropriate ref-counting to fix, from Steffen Klassert. 13) Fix mis-programming of FDR and RMCR registers on R8A7740 sh_eth chips, from Nguyen Hong Ky and Simon Horman. 14) MLX4 forgets to DMA unmap pages on RX, fix from Amir Vadai. 15) IPV6 GRE tunnel MTU upper limit is miscalculated, from Oussama Ghorbel. 16) Fix typo in fq_change(), we were assigning "initial quantum" to "quantum". From Eric Dumazet. 17) Set a more appropriate sk_pacing_rate for non-TCP sockets, otherwise FQ packet scheduler does not pace those flows properly. Also from Eric Dumazet. 18) rtlwifi miscalculates packet pointers, from Mark Cave-Ayland. 19) l2tp_xmit_skb() can be called from process context, not just softirq context, so we must always make sure to BH disable around it. From Eric Dumazet. 20) On qdisc reset, we forget to purge the RB tree of SKBs in netem packet scheduler. From Stephen Hemminger. 21) Fix info leak in farsync WAN driver ioctl() handler, from Dan Carpenter and Salva Peiró. 22) Fix PHY reset and other issues in dm9000 driver, from Nikita Kiryanov and Michael Abbott. 23) When hardware can do SCTP crc32 checksums, we accidently don't disable the csum offload when IPSEC transformations have been applied. From Fan Du and Vlad Yasevich. 24) Tail loss probing in TCP leaves the socket in the wrong congestion avoidance state. From Yuchung Cheng. 25) In CPSW driver, enable NAPI before interrupts are turned on, from Markus Pargmann. 26) Integer underflow and dual-assignment in YAM hamradio driver, from Dan Carpenter. 27) If we are going to mangle a packet in tcp_set_skb_tso_segs() we must unclone it. This fixes various hard to track down crashes in drivers where the SKBs ->gso_segs was changing right from underneath the driver during TX queueing. From Eric Dumazet. 28) Fix the handling of VLAN IDs, and in particular the special IDs 0 and 4095, in the bridging layer. From Toshiaki Makita. 29) Another info leak, this time in wanxl WAN driver, from Salva Peiró. 30) Fix race in socket credential passing, from Daniel Borkmann. 31) WHen NETLABEL is disabled, we don't validate CIPSO packets properly, from Seif Mazareeb. 32) Fix identification of fragmented frames in ipv4/ipv6 UDP Fragmentation Offload output paths, from Jiri Pirko. 33) Virtual Function fixes in bnx2x driver from Yuval Mintz and Ariel Elior. 34) When we removed the explicit neighbour pointer from ipv6 routes a slight regression was introduced for users such as IPVS, xt_TEE, and raw sockets. We mix up the users requested destination address with the routes assigned nexthop/gateway. From Julian Anastasov and Simon Horman. 35) Fix stack overruns in rt6_probe(), the issue is that can end up doing two full packet xmit paths at the same time when emitting neighbour discovery messages. From Hannes Frederic Sowa. 36) davinci_emac driver doesn't handle IFF_ALLMULTI correctly, from Mariusz Ceier. 37) Make sure to set TCP sk_pacing_rate after the first legitimate RTT sample, from Neal Cardwell. 38) Wrong netlink attribute passed to xfrm_replay_verify_len(), from Steffen Klassert. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (152 commits) ax88179_178a: Add VID:DID for Samsung USB Ethernet Adapter ax88179_178a: Correct the RX error definition in RX header Revert "bridge: only expire the mdb entry when query is received" tcp: initialize passive-side sk_pacing_rate after 3WHS davinci_emac.c: Fix IFF_ALLMULTI setup mac802154: correct a typo in ieee802154_alloc_device() prototype ipv6: probe routes asynchronous in rt6_probe netfilter: nf_conntrack: fix rt6i_gateway checks for H.323 helper ipv6: fill rt6i_gateway with nexthop address ipv6: always prefer rt6i_gateway if present bnx2x: Set NETIF_F_HIGHDMA unconditionally bnx2x: Don't pretend during register dump bnx2x: Lock DMAE when used by statistic flow bnx2x: Prevent null pointer dereference on error flow bnx2x: Fix config when SR-IOV and iSCSI are enabled bnx2x: Fix Coalescing configuration bnx2x: Unlock VF-PF channel on MAC/VLAN config error bnx2x: Prevent an illegal pointer dereference during panic bnx2x: Fix Maximum CoS estimation for VFs drivers: net: cpsw: fix kernel warn during iperf test with interrupt pacing ...
-