- 29 1月, 2008 40 次提交
-
-
由 Ivo van Doorn 提交于
Antenna switching will be ignored when RX is enabled during the switch. Make sure we disable the RX during the switch and don't forget to reenable it later. Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ivo van Doorn 提交于
Version bump. Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mattias Nissler 提交于
In the config() handler, make sure that we do configure an antenna if the current active antenna is uninitialized. Furthermore, don't overwrite the active antenna with bogus values if we didn't touch the antenna setup. Signed-off-by: NMattias Nissler <mattias.nissler@gmx.de> Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ivo van Doorn 提交于
Cleanup if-statements for simple 1/0 register field values. This also fixes a endian bug in rt2500usb when working with the PHY_CSR2 initialization. As well as a bug in the enabling of the LED in rt73usb. Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ivo van Doorn 提交于
When mac80211 indicates that the default antenna setup should be used _and_ that this default setup is SW_DIVERSITY. This requires sampling and storing the RSSI per antenna and check once every 2 seconds to determine if the RSSI has changed significantly. Once this is the case we should sample the other antenna for a short period and evaluate if we need to swap antenna or not. Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ivo van Doorn 提交于
rt2x00_clear_link() was becoming too large for statically inline, also it was used on a single location and shouldn't really be used anywhere else. So move the entire code into the function rt2x00lib_start_link_tuner() Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ivo van Doorn 提交于
Although ANTENNA_SW_DIVERSITY should never be send to the driver, we should still handle it to prevent bugs. But instead of defaulting to ANTENNA_HW_DIVERSITY we should default to ANTENNA_B instead. Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ivo van Doorn 提交于
mac80211 has 3 values for the antenna setup: 0 - default 1 - use antenna 1 2 - use antenna 2 This means that rt2x00 should store the default value from the EEPROM somwhere and use that when mac80211 indicates that the antenna setup is 0. This also implies that rt2x00 should no longer write the hw->config.antenna_sel_* values based on the EEPROM input. This also adds the basis in rt2x00lib for correct software diversity handling. By default rt2x00lib will now configure antenna B instead of hardware diversity. Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ivo van Doorn 提交于
When setting the default EEPROM values use the values from the enums instead of "magic" values. Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ivo van Doorn 提交于
Move all link quality statistics variables into the link_qual structure. This cleans up the link structure and allows us to use it for more then just statistics. Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rami Rosen 提交于
In net/bridge/netfilter/ebtables.c, - remove unused include of a header file (linux/tty.h) and remove the corresponding comment above it. Signed-off-by: NRami Rosen <ramirose@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Reported by Andrew Morton. net/sctp/sm_statefuns.c: In function 'sctp_sf_do_5_1C_ack': net/sctp/sm_statefuns.c:484: warning: 'error' may be used uninitialized in this function Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Lezcano 提交于
The network namespace pointer can be stored into the dst_ops structure. This is usefull when there are multiple instances of the dst_ops for a protocol. When there are no several instances, this field will be never used in the protocol. So there is no impact for the protocols which do implement the network namespaces. Signed-off-by: NDaniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Lezcano 提交于
The garbage collection function receive the dst_ops structure as parameter. This is useful for the next incoming patchset because it will need the dst_ops (there will be several instances) and the network namespace pointer (contained in the dst_ops). The protocols which do not take care of the namespaces will not be impacted by this change (expect for the function signature), they do just ignore the parameter. Signed-off-by: NDaniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Currently, sizeof(struct fib_alias) is 24 or 48 bytes on 32/64 bits arches. Because of SLAB_HWCACHE_ALIGN requirement, these are rounded to 32 and 64 bytes respectively. This patch moves rcu to the end of fib_alias, and conditionally defines it only for CONFIG_IP_FIB_TRIE. We also remove SLAB_HWCACHE_ALIGN requirement for fib_alias and fib_node objects because it is not necessary. (BTW SLUB currently denies it for objects smaller than cache_line_size() / 2, but not SLAB) Finally, sizeof(fib_alias) go back to 16 and 32 bytes. Then, we can embed one fib_alias on each fib_node, to favor locality. Most of the time access to the fib_alias will be free because one cache line contains both the list head (fn_alias) and (one of) the list element. Signed-off-by: NEric Dumazet <dada1@cosmosbay.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
node_parent() and tnode_get_child() currently use rcu_dereference(). These functions are called from both - readers only paths (where rcu_dereference() is needed), and - writer path (where rcu_dereference() is not needed) To make explicit where rcu_dereference() is really needed, I introduced new node_parent_rcu() and tnode_get_child_rcu() functions which use rcu_dereference(), while node_parent() and tnode_get_child() dont use it. Then I changed calling sites where rcu_dereference() was really needed to call the _rcu() variants. This should have no impact but for alpha architecture, and may help future sparse checks. Signed-off-by: NEric Dumazet <dada1@cosmosbay.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
CHECK net/rose/af_rose.c net/rose/af_rose.c:125:11: warning: expensive signed divide net/rose/af_rose.c:976:46: warning: expensive signed divide net/rose/af_rose.c:1379:13: warning: context imbalance in 'rose_info_start' - wrong count at exit net/rose/af_rose.c:1406:13: warning: context imbalance in 'rose_info_stop' - unexpected unlock CHECK net/rose/rose_in.c net/rose/rose_in.c:185:25: warning: expensive signed divide CHECK net/rose/rose_route.c net/rose/rose_route.c:997:46: warning: expensive signed divide net/rose/rose_route.c:1070:13: warning: context imbalance in 'rose_node_start' - wrong count at exit net/rose/rose_route.c:1093:13: warning: context imbalance in 'rose_node_stop' - unexpected unlock net/rose/rose_route.c:1146:13: warning: context imbalance in 'rose_neigh_start' - wrong count at exit net/rose/rose_route.c:1169:13: warning: context imbalance in 'rose_neigh_stop' - unexpected unlock net/rose/rose_route.c:1229:13: warning: context imbalance in 'rose_route_start' - wrong count at exit net/rose/rose_route.c:1252:13: warning: context imbalance in 'rose_route_stop' - unexpected unlock Signed-off-by: NEric Dumazet <dada1@cosmosbay.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
CHECK net/atm/br2684.c net/atm/br2684.c:665:13: warning: context imbalance in 'br2684_seq_start' - wrong count at exit net/atm/br2684.c:676:13: warning: context imbalance in 'br2684_seq_stop' - unexpected unlock CHECK net/atm/lec.c net/atm/lec.c:196:23: warning: expensive signed divide CHECK net/atm/proc.c net/atm/proc.c:151:14: warning: context imbalance in 'vcc_seq_start' - wrong count at exit net/atm/proc.c:154:13: warning: context imbalance in 'vcc_seq_stop' - unexpected unlock Signed-off-by: NEric Dumazet <dada1@cosmosbay.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
CHECK net/appletalk/aarp.c net/appletalk/aarp.c:951:14: warning: context imbalance in 'aarp_seq_start' - wrong count at exit net/appletalk/aarp.c:977:13: warning: context imbalance in 'aarp_seq_stop' - unexpected unlock CHECK net/appletalk/atalk_proc.c net/appletalk/atalk_proc.c:34:11: warning: context imbalance in 'atalk_seq_interface_start' - wrong count at exit net/appletalk/atalk_proc.c:54:13: warning: context imbalance in 'atalk_seq_interface_stop' - unexpected unlock net/appletalk/atalk_proc.c:93:11: warning: context imbalance in 'atalk_seq_route_start' - wrong count at exit net/appletalk/atalk_proc.c:113:13: warning: context imbalance in 'atalk_seq_route_stop' - unexpected unlock net/appletalk/atalk_proc.c:161:11: warning: context imbalance in 'atalk_seq_socket_start' - wrong count at exit net/appletalk/atalk_proc.c:178:13: warning: context imbalance in 'atalk_seq_socket_stop' - unexpected unlock Signed-off-by: NEric Dumazet <dada1@cosmosbay.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Allows to remove five empty implementations. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Its unused and unlikely to ever be used. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
- Remove declarations of non-existing variables and functions - Move helper init/cleanup function declarations to nf_conntrack_helper.h - Remove unneeded __nf_conntrack_attach declaration and make it static Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Since there now is generic support for shared sysctl paths, the only remains are the net/netfilter and net/ipv4/netfilter paths. Move them to net/netfilter/core.c and net/ipv4/netfilter.c and kill nf_sysctl.c. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Instead of keeping pointers to the timeout values in a table, simply put the timeout values in the table directly. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Use SCTP_CHUNK_FLAG_T instead of 0x1. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Spotted by Pablo Neira Ayuso <pablo@netfilter.org>. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Don't take and release the lock once per SCTP chunk, simply hold it the entire time while iterating through the chunks. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
The name is misleading, it holds the new connection state, so rename it to "newstate". Also rename "oldsctpstate" to "oldstate" for consistency. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Consolidate error paths and use proper symbolic return value instead of magic values. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Eliminate a few lines over 80 characters by using a local variable to hold the conntrack direction instead of using CTINFO2DIR everywhere. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Reduce the length of some overly long lines by renaming all "conntrack" variables to "ct". Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Use unsigned long instead of char for the bitmap and removed lots of casts. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Reindent switch cases properly, get rid of weird constructs like "!(x == y)", put logical operations on the end of the line instead of the next line, get rid of superfluous braces. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Instead of keeping pointers to the timeout values in a table, simply put the timeout values in the table directly. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
The TCP and SCTP conntrack state transition tables only holds small numbers, but gcc uses 4 byte per entry for the enum. Switching to an u8 reduces the size from 480 to 120 bytes for TCP and from 576 to 144 bytes for SCTP. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denys Vlasenko 提交于
The current TCP RST construction reuses the old packet and can't deal with IP options as a consequence of that. Construct the RST from scratch instead. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denys Vlasenko 提交于
This patch removes inlines except those which are used by packet matching code and thus are performance-critical. Before: $ size */*/*/ip*tables*.o text data bss dec hex filename 6402 500 16 6918 1b06 net/ipv4/netfilter/ip_tables.o 7130 500 16 7646 1dde net/ipv6/netfilter/ip6_tables.o After: $ size */*/*/ip*tables*.o text data bss dec hex filename 6307 500 16 6823 1aa7 net/ipv4/netfilter/ip_tables.o 7010 500 16 7526 1d66 net/ipv6/netfilter/ip6_tables.o Signed-off-by: NDenys Vlasenko <vda.linux@googlemail.com> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jan Engelhardt 提交于
With all the newly introduced features, there is a lot to remove later on after a compatibility grace period of 2 years. Signed-off-by: NJan Engelhardt <jengelh@computergmbh.de> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jan Engelhardt 提交于
Adds IPv6 support to xt_iprange, making it possible to match on IPv6 address ranges with ip6tables. Signed-off-by: NJan Engelhardt <jengelh@computergmbh.de> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-