- 10 9月, 2014 27 次提交
-
-
由 Rob Clark 提交于
Move this into into adreno_device, and decide based on gpu revision rather than just assuming a3xx. Signed-off-by: NRob Clark <robdclark@gmail.com>
-
由 Rob Clark 提交于
We'd rather not duplicate these parts as support for additional gpu generations is added. Signed-off-by: NRob Clark <robdclark@gmail.com>
-
由 Rob Clark 提交于
LVDS panel, make/model described as: AU Optronics Corporation - B101XTN01.0 (H/W:0A) See: http://www.encore-electronic.com/media/B101XTN01.0.pdf Tested with panel attached to an Inforce IFC6410 board. Signed-off-by: NRob Clark <robdclark@gmail.com>
-
由 Rob Clark 提交于
LVDS panel support uses the LCDC (parallel) encoder. Unlike with HDMI, there is not a separate LVDS block, so no need to split things into a bridge+connector. Nor is there is anything re-used with mdp5. Note that there can be some regulators shared between HDMI and LVDS (in particular, on apq8064, ext_3v3p), so we should not use the _exclusive() variants of devm_regulator_get(). The drm_panel framework is used for panel-specific driver. Signed-off-by: NRob Clark <robdclark@gmail.com>
-
由 Rob Clark 提交于
In particular, blend_setup() should not overwrite the other crtc's mixer settings. Also, the encoder needs to be able to specify the mixer-id explicitly, since both LVDS and DTV use 'INTF_LVDC_DTV', so we cannot guess the mixer-id from the interface. Signed-off-by: NRob Clark <robdclark@gmail.com>
-
由 Rob Clark 提交于
In particular, pick up the definitions for a handful of LVDS related registers. Signed-off-by: NRob Clark <robdclark@gmail.com>
-
git://git.pengutronix.de/git/pza/linux由 Dave Airlie 提交于
IPUv3 preparations for capture support * tag 'ipu-3.18' of git://git.pengutronix.de/git/pza/linux: (26 commits) gpu: ipu-v3: Add ipu_dump() gpu: ipu-cpmem: Add ipu_cpmem_dump() gpu: ipu-v3: Add more planar formats support gpu: ipu-cpmem: Add second buffer support to ipu_cpmem_set_image() gpu: ipu-cpmem: Add ipu_cpmem_set_rotation() gpu: ipu-cpmem: Add ipu_cpmem_set_axi_id() gpu: ipu-cpmem: Add ipu_cpmem_set_block_mode() gpu: ipu-v3: Add ipu_idmac_lock_enable() gpu: ipu-v3: Add ipu_idmac_enable_watermark() gpu: ipu-v3: Add ipu_stride_to_bytes() gpu: ipu-v3: Add __ipu_idmac_reset_current_buffer() gpu: ipu-v3: Add ipu_idmac_clear_buffer() gpu: ipu-v3: Add ipu_idmac_buffer_is_ready() gpu: ipu-v3: Move IDMAC channel names to imx-ipu-v3.h gpu: ipu-v3: Add helper function checking if pixfmt is planar gpu: ipu-v3: Add rotation mode conversion utilities gpu: ipu-v3: Add ipu_mbus_code_to_colorspace() gpu: ipu-v3: smfc: Add ipu_smfc_set_watermark() gpu: ipu-v3: smfc: Convert to per-channel gpu: ipu-v3: smfc: Move enable/disable to ipu-smfc.c ...
-
由 David Herrmann 提交于
Same as the other legacy APIs, most of this is internal, so prefix it with drm_legacy_* and move into drm_legacy.h. Signed-off-by: NDavid Herrmann <dh.herrmann@gmail.com> Reviewed-by: NThierry Reding <treding@nvidia.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 David Herrmann 提交于
This merges all the remains of drm_usb into its only user, udl. We can then drop all the drm_usb stuff, including dev->usbdev. Signed-off-by: NDavid Herrmann <dh.herrmann@gmail.com> Reviewed-by: NThierry Reding <treding@nvidia.com> Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 David Herrmann 提交于
..we will not miss you.. Signed-off-by: NDavid Herrmann <dh.herrmann@gmail.com> Reviewed-by: NThierry Reding <treding@nvidia.com> Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 David Herrmann 提交于
One step closer to dropping all the drm_bus_* code: Add a driver->set_busid() callback and make all drivers use the generic helpers. Nouveau is the only driver that uses two different bus-types with the same drm_driver. This is totally broken if both buses are available on the same machine (unlikely, but lets be safe). Therefore, we create two different drivers for each platform during module_init() and set the set_busid() callback respectively. Signed-off-by: NDavid Herrmann <dh.herrmann@gmail.com> Reviewed-by: NThierry Reding <treding@nvidia.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 David Herrmann 提交于
This field is unused and there is really no reason to optimize unique-allocations. Drop it. Signed-off-by: NDavid Herrmann <dh.herrmann@gmail.com> Reviewed-by: NThierry Reding <treding@nvidia.com> Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 David Herrmann 提交于
Lets use kasprintf() to avoid pre-allocating the buffer. This is really nothing to optimize for speed and the input is trusted, so kasprintf() is just fine. Signed-off-by: NDavid Herrmann <dh.herrmann@gmail.com> Reviewed-by: NThierry Reding <treding@nvidia.com> Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 David Herrmann 提交于
Including headers somewhere else but at the top is ugly, deprecated and was used in early days only to speed up compile-times. Those days are over. Make headers independent and then move the inclusions to the top. Signed-off-by: NDavid Herrmann <dh.herrmann@gmail.com> Reviewed-by: NThierry Reding <treding@nvidia.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 David Herrmann 提交于
The sigdata structure is only used to group two fields in drm_device. Inline it and make it an unnamed object. Signed-off-by: NDavid Herrmann <dh.herrmann@gmail.com> Reviewed-by: NThierry Reding <treding@nvidia.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 David Herrmann 提交于
DRM_DEBUG_CODE is currently always set, so distributions enable it. The only reason to keep support in code is if developers wanted to disable debug support. Sounds unlikely. All the DRM_DEBUG() printks are still guarded by a drm_debug read. So if its cacheline is read once, they're discarded pretty fast.. There should hardly be any performance penalty, it's even guarded by unlikely(). Signed-off-by: NDavid Herrmann <dh.herrmann@gmail.com> Reviewed-by: NThierry Reding <treding@nvidia.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 David Herrmann 提交于
It is hardly possible to review the drmP.h includes, anymore. Order them alphabetically, linux/ first, then asm/ and then local drm/ includes. Since a long time ago, kernel headers have been converted to include required headers themselves. No-one cares whether that means the compiler has to include a header multiple times. In fact, GCC already does some optimization regarding multiple inclusions if a sorrounding #ifndef is present. Signed-off-by: NDavid Herrmann <dh.herrmann@gmail.com> Acked-by: NThierry Reding <treding@nvidia.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 David Herrmann 提交于
With drm_memory.h gone, there is no header left that uses __OS_HAS_AGP. Move it into drm_agpsupport.h (which is itself included from drmP.h) to hide it harder from public eyes. Signed-off-by: NDavid Herrmann <dh.herrmann@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 David Herrmann 提交于
The drm_memory.h header is only used to define PAGE_AGP, which is only used in drm_memory.c. Fold the header into drm_memory.c and drop it. Signed-off-by: NDavid Herrmann <dh.herrmann@gmail.com> Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 David Herrmann 提交于
drmP.h is internal to the kernel. No need to keep the __KERNEL__ protection. Signed-off-by: NDavid Herrmann <dh.herrmann@gmail.com> Reviewed-by: NThierry Reding <treding@nvidia.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 David Herrmann 提交于
pte_wrprotect() is only used by drm_vm.c, so move the include there. Also include it unconditionally, all architectures provide this header! Furthermore, replace asm/current.h with sched.h, which includes asm/current.h unconditionally. This way we get the same effect and avoid direct asm/ includes. Furthermore, drop the weird __alpha__ protection. It's safe to include sched.h everywhere (and the wait.h comment doesn't apply, anyway). Signed-off-by: NDavid Herrmann <dh.herrmann@gmail.com> Reviewed-by: NThierry Reding <treding@nvidia.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 David Herrmann 提交于
Move drm_agp_head to drm_agpsupport.h and drm_agp_mem into drm_legacy.h. Unfortunately, drivers still heavily access drm_agp_head so we cannot move it to drm_legacy.h. However, at least it's no longer visible in drmP.h now (it's directly included from it, though). Signed-off-by: NDavid Herrmann <dh.herrmann@gmail.com> Reviewed-by: NThierry Reding <treding@nvidia.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 David Herrmann 提交于
This structure is unused, drop it. Signed-off-by: NDavid Herrmann <dh.herrmann@gmail.com> Reviewed-by: NThierry Reding <treding@nvidia.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 David Herrmann 提交于
In drm_release(), we currently call drm_remove_magic() if the drm_file has a drm-magic attached. Therefore, once drm_master_release() is called, the magic-list _must_ be empty. By dropping the no-op cleanup, we can move "struct drm_magic_entry" to drm_auth.c and avoid exposing it to all of DRM. Signed-off-by: NDavid Herrmann <dh.herrmann@gmail.com> Reviewed-by: NThierry Reding <treding@nvidia.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 David Herrmann 提交于
Make all the drm_vma_entry handling local to drm_vm.c and hide it from global headers. This requires to extract the inlined legacy drm_vma_entry cleanup into a small helper and also move a weirdly placed drm_vma_info helper into drm_vm.c. Signed-off-by: NDavid Herrmann <dh.herrmann@gmail.com> Reviewed-by: NThierry Reding <treding@nvidia.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 David Herrmann 提交于
Move internal declarations to drm_legacy.h and add drm_legacy_*() prefix to all legacy functions. [airlied: add a bit of an explaination to drm_legacy.h] Signed-off-by: NDavid Herrmann <dh.herrmann@gmail.com> Reviewed-by: NThierry Reding <treding@nvidia.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 David Herrmann 提交于
Radeon UMS is the last user of drm_buffer. Move it out of sight so radeon can drop it together with UMS. Signed-off-by: NDavid Herrmann <dh.herrmann@gmail.com> Reviewed-by: NThierry Reding <treding@nvidia.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 03 9月, 2014 7 次提交
-
-
由 Maarten Lankhorst 提交于
This crash was already here before the conversion, but qxl never leaked hard enough to hit this. Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@canonical.com>
-
由 Maarten Lankhorst 提交于
This is how you implement a memory sieve in a driver. ;-) Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@canonical.com>
-
由 Maarten Lankhorst 提交于
The locking of release_lock was stupid; t should have been be called with fence_lock_irq if it was legitimately used. Unfortunately it never protected anything except the fence implementation correctly. Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@canonical.com>
-
由 Andreas Pokorny 提交于
As there should not be any other virtual device that might share buffers, the callbacks remain empty stubs. Still prime can be used to transfer buffers between processes that use qxl. Signed-off-by: NAndreas Pokorny <andreas.pokorny@canonical.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Andreas Pokorny 提交于
Signed-off-by: NAndreas Pokorny <andreas.pokorny@canonical.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
git://people.freedesktop.org/~mlankhorst/linux由 Dave Airlie 提交于
Merge the move to generic fences for TTM using drivers. * 'for-airlied-next' of git://people.freedesktop.org/~mlankhorst/linux: drm/nouveau: use shared fences for readable objects drm/nouveau: Keep only a single list for validation. drm/ttm: use rcu in core ttm drm/vmwgfx: use rcu in vmw_user_dmabuf_synccpu_grab drm/radeon: use rcu waits in some ioctls drm/nouveau: use rcu in nouveau_gem_ioctl_cpu_prep drm/ttm: flip the switch, and convert to dma_fence drm/qxl: rework to new fence interface drm/nouveau: rework to new fence interface drm/vmwgfx: rework to new fence interface, v2 drm/vmwgfx: get rid of different types of fence_flags entirely drm/radeon: use common fence implementation for fences, v4 drm/ttm: kill off some members to ttm_validate_buffer drm/ttm: add interruptible parameter to ttm_eu_reserve_buffers drm/ttm: kill fence_lock drm/ttm: call ttm_bo_wait while inside a reservation drm/nouveau: require reservations for nouveau_fence_sync and nouveau_bo_fence drm/nouveau: add reservation to nouveau_gem_ioctl_cpu_prep
-
git://anongit.freedesktop.org/drm-intel由 Dave Airlie 提交于
drm-intel-next-2014-08-22: - basic code for execlist, which is the fancy new cmd submission on gen8. Still disabled by default (Ben, Oscar Mateo, Thomas Daniel et al) - remove the useless usage of console_lock for I915_FBDEV=n (Chris) - clean up relations between ctx and ppgtt - clean up ppgtt lifetime handling (Michel Thierry) - various cursor code improvements from Ville - execbuffer code cleanups and secure batch fixes (Chris) - prep work for dev -> dev_priv transition (Chris) - some of the prep patches for the seqno -> request object transition (Chris) - various small improvements all over * tag 'drm-intel-next-2014-09-01' of git://anongit.freedesktop.org/drm-intel: (86 commits) drm/i915: fix suspend/resume for GENs w/o runtime PM support drm/i915: Update DRIVER_DATE to 20140822 drm: fix plane rotation when restoring fbdev configuration drm/i915/bdw: Disable execlists by default drm/i915/bdw: Enable Logical Ring Contexts (hence, Execlists) drm/i915/bdw: Document Logical Rings, LR contexts and Execlists drm/i915/bdw: Print context state in debugfs drm/i915/bdw: Display context backing obj & ringbuffer info in debugfs drm/i915/bdw: Display execlists info in debugfs drm/i915/bdw: Disable semaphores for Execlists drm/i915/bdw: Make sure gpu reset still works with Execlists drm/i915/bdw: Don't write PDP in the legacy way when using LRCs drm/i915: Track cursor changes as frontbuffer tracking flushes drm/i915/bdw: Help out the ctx switch interrupt handler drm/i915/bdw: Avoid non-lite-restore preemptions drm/i915/bdw: Handle context switch events drm/i915/bdw: Two-stage execlist submit process drm/i915/bdw: Write the tail pointer, LRC style drm/i915/bdw: Implement context switching (somewhat) drm/i915/bdw: Emission of requests with logical rings ... Conflicts: drivers/gpu/drm/i915/i915_drv.c
-
- 02 9月, 2014 6 次提交
-
-
由 Maarten Lankhorst 提交于
nouveau keeps track in userspace whether a buffer is being written to or being read, but it doesn't use that information. Change this to allow multiple readers on the same bo. Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@canonical.com> Acked-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Maarten Lankhorst 提交于
Maintain the original order to handle VRAM/GART/mixed correctly for <nv50, it's likely not as important on newer cards. Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@canonical.com> Acked-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Maarten Lankhorst 提交于
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@canonical.com>
-
由 Maarten Lankhorst 提交于
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@canonical.com>
-
由 Maarten Lankhorst 提交于
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@canonical.com> Reviewed-by: NChristian König <christian.koenig@amd.com>
-
由 Maarten Lankhorst 提交于
With the conversion to the reservation api this should be safe. Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@canonical.com> Acked-by: NBen Skeggs <bskeggs@redhat.com>
-