- 18 10月, 2013 4 次提交
-
-
由 Gu Zheng 提交于
Previously, do_checkpoint() will call congestion_wait() for waiting the pages (previous submitted node/meta/data pages) to be written back. Because congestion_wait() will set a regular period (e.g. HZ / 50 ) for waiting, and no additional wake up mechanism was introduced if IO ends up before regular period costed. Yuan Zhong found there is a situation that after the pages have been written back, but the checkpoint thread still wait for congestion_wait to exit. So here we store checkpoint task into f2fs_sb when doing checkpoint, it'll wait for IO completes if there's IO going on, and in the end IO path, wake up checkpoint task when IO ends up. Thanks to Yuan Zhong's pre work about this problem. Reported-by: NYuan Zhong <yuan.mark.zhong@samsung.com> Signed-off-by: NGu Zheng <guz.fnst@cn.fujitsu.com> Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>
-
由 Gu Zheng 提交于
Introduce function read_raw_super_block() to hide reading raw super block and the retry routine if the first sb is invalid. Signed-off-by: NGu Zheng <guz.fnst@cn.fujitsu.com> Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>
-
由 Jaegeuk Kim 提交于
This patch removes the logic previously introduced to address the starvation on cp_rwsem. One potential there-in bug is that we should cover the wait.list with spin_lock, but the previous code broke this rule. And, actually current rwsem handles this starvation issue reasonably, so that we didn't need to do this before neither. Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>
-
由 Jaegeuk Kim 提交于
When storing i_rdev, we should check its file type. Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>
-
- 08 10月, 2013 2 次提交
-
-
由 Jaegeuk Kim 提交于
Previously, there was a erroneous scenario like below. thread 1: thread 2: f2fs_unlink - acquire_orphan_inode : sbi->n_orphans++ write_checkpoint - block_operations : f2fs_lock_all - do_checkpoint : write orphan blocks with sbi->n_orphans - unblock_operations - f2fs_lock_op - release_orphan_inode - f2fs_unlock_op During the checkpoint by thread 2, f2fs stores a wrong orphan block according to the wrong sbi->n_orphans. To avoid this, simply we should make cover acquire_orphan_inode too with f2fs_lock_op. Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>
-
由 Jaegeuk Kim 提交于
During the f2fs_put_super procedure, we don't need to conduct checkpoint all the time, since we don't need to do that if superblock is clean. Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>
-
- 07 10月, 2013 2 次提交
-
-
由 Kelly Anderson 提交于
The current f2fs code errors if the xattr or acl options are passed when remounting. This is important in a typical scenario where f2fs is mounted as a "ro" root file-system by the boot loader and then the init process wants to remount it "rw" with the "remount,rw" option. Signed-off-by: NKelly Anderson <kelly@xilka.com> Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>
-
由 Gu Zheng 提交于
The fs_locks is used to block other ops(ex, recovery) when doing checkpoint. And each other operate routine(besides checkpoint) needs to acquire a fs_lock, there is a terrible problem here, if these are too many concurrency threads acquiring fs_lock, so that they will block each other and may lead to some performance problem, but this is not the phenomenon we want to see. Though there are some optimization patches introduced to enhance the usage of fs_lock, but the thorough solution is using a *rw_sem* to replace the fs_lock. Checkpoint routine takes write_sem, and other ops take read_sem, so that we can block other ops(ex, recovery) when doing checkpoint, and other ops will not disturb each other, this can avoid the problem described above completely. Because of the weakness of rw_sem, the above change may introduce a potential problem that the checkpoint thread might get starved if other threads are intensively locking the read semaphore for I/O.(Pointed out by Xu Jin) In order to avoid this, a wait_list is introduced, the appending read semaphore ops will be dropped into the wait_list if checkpoint thread is waiting for write semaphore, and will be waked up when checkpoint thread gives up write semaphore. Thanks to Kim's previous review and test, and will be very glad to see other guys' performance tests about this patch. V2: -fix the potential starvation problem. -use more suitable func name suggested by Xu Jin. Signed-off-by: NGu Zheng <guz.fnst@cn.fujitsu.com> [Jaegeuk Kim: adjust minor coding standard] Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>
-
- 25 9月, 2013 4 次提交
-
-
由 Russ W. Knize 提交于
During recovery, orphan inodes are deleted via truncate_hole(). These orphans are added by recover_dentry() via f2fs_delete_entry(). However, f2fs_delete_entry() adds them via add_orphan_inode() without calling acquire_orphan_inode() first. This prevents the counters from being incremented properly, which causes them to underflow when remove_orphan_inode() is called later on. Signed-off-by: NRuss Knize <rknize@motorola.com> Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>
-
由 Russ Knize 提交于
f2fs_initxattrs() is called internally from within F2FS and should not call functions that are used by VFS handlers. This avoids certain deadlocks: - vfs_create() - f2fs_create() <-- takes an fs_lock - f2fs_add_link() - __f2fs_add_link() - init_inode_metadata() - f2fs_init_security() - security_inode_init_security() - f2fs_initxattrs() - f2fs_setxattr() <-- also takes an fs_lock If the caller happens to grab the same fs_lock from the pool in both places, they will deadlock. There are also deadlocks involving multiple threads and mutexes: - f2fs_write_begin() - f2fs_balance_fs() <-- takes gc_mutex - f2fs_gc() - write_checkpoint() - block_operations() - mutex_lock_all() <-- blocks trying to grab all fs_locks - f2fs_mkdir() <-- takes an fs_lock - __f2fs_add_link() - f2fs_init_security() - security_inode_init_security() - f2fs_initxattrs() - f2fs_setxattr() - f2fs_balance_fs() <-- blocks trying to take gc_mutex Signed-off-by: NRuss Knize <Russ.Knize@motorola.com> Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>
-
由 Russ W. Knize 提交于
Accounting errors from buggy code calling the acquire/release/remove orphan inode interfaces can cause n_orphans to underflow, which will then cause acquire_orphan_inode() to return -ENOSPC on the next operation. This commit guards against that condition. Signed-off-by: NRuss Knize <rknize@motorola.com> Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>
-
由 Chao Yu 提交于
Previously, recover_fsync_data still to write checkpoint when there is nothing to recover with normal umount image. It may reduce mount performance and flash memory lifetime, so let's remove it. Signed-off-by: NTan Shu <shu.tan@samsung.com> Signed-off-by: NYu Chao <chao2.yu@samsung.com> Reviewed-by: NGu Zheng <guz.fnst@cn.fujitsu.com> Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>
-
- 24 9月, 2013 6 次提交
-
-
由 Chao Yu 提交于
This patch add macro MAX_BIO_BLOCKS to limit value of npages in f2fs_bio_alloc, it can avoid allocating failure in bio_alloc caused by npages is larger than BIO_MAX_PAGES. Signed-off-by: NYu Chao <chao2.yu@samsung.com> Reviewed-by: NGu Zheng <guz.fnst@cn.fujitsu.com> Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>
-
由 Jin Xu 提交于
Since the MAX_VICTIM_SEARCH has been enlarged from 20 to 4096, the victim searching overhead will be increased much than before, especially for SSR that searches victim for use quiet often. This patch intends to reduce the overhead a little bit by: - make the get_gc_cost a inline routine to reduce function call overhead - reduce multiplication and division operations - reduce unnecessary comparison operation Signed-off-by: NJin Xu <jinuxstyle@gmail.com> Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>
-
由 Yu Chao 提交于
There is a performance problem: when all sbi->fs_lock are holded, then all the following threads may get the same next_lock value from sbi->next_lock_num in function mutex_lock_op, and wait for the same lock(fs_lock[next_lock]), it may cause performance reduce. So we move the sbi->next_lock_num++ before getting lock, this will average the following threads if all sbi->fs_lock are holded. v1-->v2: Drop the needless spin_lock as Jaegeuk suggested. Suggested-by: NJaegeuk Kim <jaegeuk.kim@samsung.com> Signed-off-by: NYu Chao <chao2.yu@samsung.com> Signed-off-by: NGu Zheng <guz.fnst@cn.fujitsu.com> Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging由 Linus Torvalds 提交于
Pull staging fixes from Greg KH: "Here are a number of small staging tree and iio driver fixes. Nothing major, just lots of little things" * tag 'staging-3.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (34 commits) iio:buffer_cb: Add missing iio_buffer_init() iio: Prevent race between IIO chardev opening and IIO device free iio: fix: Keep a reference to the IIO device for open file descriptors iio: Stop sampling when the device is removed iio: Fix crash when scan_bytes is computed with active_scan_mask == NULL iio: Fix mcp4725 dev-to-indio_dev conversion in suspend/resume iio: Fix bma180 dev-to-indio_dev conversion in suspend/resume iio: Fix tmp006 dev-to-indio_dev conversion in suspend/resume iio: iio_device_add_event_sysfs() bugfix staging: iio: ade7854-spi: Fix return value staging:iio:hmc5843: Fix measurement conversion iio: isl29018: Fix uninitialized value staging:iio:dummy fix kfifo_buf kconfig dependency issue if kfifo modular and buffer enabled for built in dummy driver. iio: at91: fix adc_clk overflow staging: line6: add bounds check in snd_toneport_source_put() Staging: comedi: Fix dependencies for drivers misclassified as PCI staging: r8188eu: Adjust RX gain staging: r8188eu: Fix smatch warning in core/rtw_ieee80211. staging: r8188eu: Fix smatch error in core/rtw_mlme_ext.c staging: r8188eu: Fix Smatch off-by-one warning in hal/rtl8188e_hal_init.c ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb由 Linus Torvalds 提交于
Pull USB fixes from Greg KH: "Here are a number of small USB fixes for 3.12-rc2. One is a revert of a EHCI change that isn't quite ready for 3.12. Others are minor things, gadget fixes, Kconfig fixes, and some quirks and documentation updates. All have been in linux-next for a bit" * tag 'usb-3.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: pl2303: distinguish between original and cloned HX chips USB: Faraday fotg210: fix email addresses USB: fix typo in usb serial simple driver Kconfig Revert "USB: EHCI: support running URB giveback in tasklet context" usb: s3c-hsotg: do not disconnect gadget when receiving ErlySusp intr usb: s3c-hsotg: fix unregistration function usb: gadget: f_mass_storage: reset endpoint driver data when disabled usb: host: fsl-mph-dr-of: Staticize local symbols usb: gadget: f_eem: Staticize eem_alloc usb: gadget: f_ecm: Staticize ecm_alloc usb: phy: omap-usb3: Fix return value usb: dwc3: gadget: avoid memory leak when failing to allocate all eps usb: dwc3: remove extcon dependency usb: gadget: add '__ref' for rndis_config_register() and cdc_config_register() usb: dwc3: pci: add support for BayTrail usb: gadget: cdc2: fix conversion to new interface of f_ecm usb: gadget: fix a bug and a WARN_ON in dummy-hcd usb: gadget: mv_u3d_core: fix violation of locking discipline in mv_u3d_ep_disable()
-
- 23 9月, 2013 4 次提交
-
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull drm fixes from Dave Airlie: - some small fixes for msm and exynos - a regression revert affecting nouveau users with old userspace - intel pageflip deadlock and gpu hang fixes, hsw modesetting hangs * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (22 commits) Revert "drm: mark context support as a legacy subsystem" drm/i915: Don't enable the cursor on a disable pipe drm/i915: do not update cursor in crtc mode set drm/exynos: fix return value check in lowlevel_buffer_allocate() drm/exynos: Fix address space warnings in exynos_drm_fbdev.c drm/exynos: Fix address space warning in exynos_drm_buf.c drm/exynos: Remove redundant OF dependency drm/msm: drop unnecessary set_need_resched() drm/i915: kill set_need_resched drm/msm: fix potential NULL pointer dereference drm/i915/dvo: set crtc timings again for panel fixed modes drm/i915/sdvo: Robustify the dtd<->drm_mode conversions drm/msm: workaround for missing irq drm/msm: return -EBUSY if bo still active drm/msm: fix return value check in ERR_PTR() drm/msm: fix cmdstream size check drm/msm: hangcheck harder drm/msm: handle read vs write fences drm/i915/sdvo: Fully translate sync flags in the dtd->mode conversion drm/i915: Use proper print format for debug prints ...
-
git://git.kernel.dk/linux-block由 Linus Torvalds 提交于
Pull block IO fixes from Jens Axboe: "After merge window, no new stuff this time only a collection of neatly confined and simple fixes" * 'for-3.12/core' of git://git.kernel.dk/linux-block: cfq: explicitly use 64bit divide operation for 64bit arguments block: Add nr_bios to block_rq_remap tracepoint If the queue is dying then we only call the rq->end_io callout. This leaves bios setup on the request, because the caller assumes when the blk_execute_rq_nowait/blk_execute_rq call has completed that the rq->bios have been cleaned up. bio-integrity: Fix use of bs->bio_integrity_pool after free blkcg: relocate root_blkg setting and clearing block: Convert kmalloc_node(...GFP_ZERO...) to kzalloc_node(...) block: trace all devices plug operation
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs由 Linus Torvalds 提交于
Pull btrfs fixes from Chris Mason: "These are mostly bug fixes and a two small performance fixes. The most important of the bunch are Josef's fix for a snapshotting regression and Mark's update to fix compile problems on arm" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (25 commits) Btrfs: create the uuid tree on remount rw btrfs: change extent-same to copy entire argument struct Btrfs: dir_inode_operations should use btrfs_update_time also btrfs: Add btrfs: prefix to kernel log output btrfs: refuse to remount read-write after abort Btrfs: btrfs_ioctl_default_subvol: Revert back to toplevel subvolume when arg is 0 Btrfs: don't leak transaction in btrfs_sync_file() Btrfs: add the missing mutex unlock in write_all_supers() Btrfs: iput inode on allocation failure Btrfs: remove space_info->reservation_progress Btrfs: kill delay_iput arg to the wait_ordered functions Btrfs: fix worst case calculator for space usage Revert "Btrfs: rework the overcommit logic to be based on the total size" Btrfs: improve replacing nocow extents Btrfs: drop dir i_size when adding new names on replay Btrfs: replay dir_index items before other items Btrfs: check roots last log commit when checking if an inode has been logged Btrfs: actually log directory we are fsync()'ing Btrfs: actually limit the size of delalloc range Btrfs: allocate the free space by the existed max extent size when ENOSPC ...
-
由 Anatol Pomozov 提交于
'samples' is 64bit operant, but do_div() second parameter is 32. do_div silently truncates high 32 bits and calculated result is invalid. In case if low 32bit of 'samples' are zeros then do_div() produces kernel crash. Signed-off-by: NAnatol Pomozov <anatol.pomozov@gmail.com> Acked-by: NTejun Heo <tj@kernel.org> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
- 22 9月, 2013 3 次提交
-
-
由 Greg Kroah-Hartman 提交于
Merge tag 'iio-fixes-for-3.12a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus Jonathan writes: First round of IIO fixes for 3.12 A series of wrong 'struct dev' assumptions in suspend/resume callbacks following on from this issue being identified in a new driver review. One to watch out for in future. A number of driver specific fixes 1) at91 - fix a overflow in clock rate computation 2) dummy - Kconfig dependency issue 3) isl29018 - uninitialized value 4) hmc5843 - measurement conversion bug introduced by recent cleanup. 5) ade7854-spi - wrong return value. Some IIO core fixes 1) Wrong value picked up for event code creation for a modified channel 2) A null dereference on failure to initialize a buffer after no buffer has been in use, when using the available_scan_masks approach. 3) Sampling not stopped when a device is removed. Effects forced removal such as hot unplugging. 4) Prevent device going away if a chrdev is still open in userspace. 5) Prevent race on chardev opening and device being freed. 6) Add a missing iio_buffer_init in the call back buffer. These last few are the first part of a set from Lars-Peter Clausen who has been taking a closer look at our removal paths and buffer handling than anyone has for quite some time.
-
git://git.linux-nfs.org/projects/trondmy/linux-nfs由 Linus Torvalds 提交于
Pull NFS client bugfix from Trond Myklebust: "Fix a regression due to incorrect sharing of gss auth caches" * tag 'nfs-for-3.12-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: RPCSEC_GSS: fix crash on destroying gss auth
-
由 Jun'ichi Nomura 提交于
Adding the number of bios in a remapped request to 'block_rq_remap' tracepoint. Request remapper clones bios in a request to track the completion status of each bio. So the number of bios can be useful information for investigation. Related discussions: http://www.redhat.com/archives/dm-devel/2013-August/msg00084.html http://www.redhat.com/archives/dm-devel/2013-September/msg00024.htmlSigned-off-by: NJun'ichi Nomura <j-nomura@ce.jp.nec.com> Acked-by: NMike Snitzer <snitzer@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
- 21 9月, 2013 15 次提交
-
-
由 Josef Bacik 提交于
Users have been complaining of the uuid tree stuff warning that there is no uuid root when trying to do snapshot operations. This is because if you mount -o ro we will not create the uuid tree. But then if you mount -o rw,remount we will still not create it and then any subsequent snapshot/subvol operations you try to do will fail gloriously. Fix this by creating the uuid_root on remount rw if it was not already there. Thanks, Signed-off-by: NJosef Bacik <jbacik@fusionio.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Mark Fasheh 提交于
btrfs_ioctl_file_extent_same() uses __put_user_unaligned() to copy some data back to it's argument struct. Unfortunately, not all architectures provide __put_user_unaligned(), so compiles break on them if btrfs is selected. Instead, just copy the whole struct in / out at the start and end of operations, respectively. Signed-off-by: NMark Fasheh <mfasheh@suse.de> Signed-off-by: NJosef Bacik <jbacik@fusionio.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Guangyu Sun 提交于
Commit 2bc55652 (Btrfs: don't update atime on RO subvolumes) ensures that the access time of an inode is not updated when the inode lives in a read-only subvolume. However, if a directory on a read-only subvolume is accessed, the atime is updated. This results in a write operation to a read-only subvolume. I believe that access times should never be updated on read-only subvolumes. To reproduce: # mkfs.btrfs -f /dev/dm-3 (...) # mount /dev/dm-3 /mnt # btrfs subvol create /mnt/sub Create subvolume '/mnt/sub' # mkdir /mnt/sub/dir # echo "abc" > /mnt/sub/dir/file # btrfs subvol snapshot -r /mnt/sub /mnt/rosnap Create a readonly snapshot of '/mnt/sub' in '/mnt/rosnap' # stat /mnt/rosnap/dir File: `/mnt/rosnap/dir' Size: 8 Blocks: 0 IO Block: 4096 directory Device: 16h/22d Inode: 257 Links: 1 Access: (0755/drwxr-xr-x) Uid: ( 0/ root) Gid: ( 0/ root) Access: 2013-09-11 07:21:49.389157126 -0400 Modify: 2013-09-11 07:22:02.330156079 -0400 Change: 2013-09-11 07:22:02.330156079 -0400 # ls /mnt/rosnap/dir file # stat /mnt/rosnap/dir File: `/mnt/rosnap/dir' Size: 8 Blocks: 0 IO Block: 4096 directory Device: 16h/22d Inode: 257 Links: 1 Access: (0755/drwxr-xr-x) Uid: ( 0/ root) Gid: ( 0/ root) Access: 2013-09-11 07:22:56.797151670 -0400 Modify: 2013-09-11 07:22:02.330156079 -0400 Change: 2013-09-11 07:22:02.330156079 -0400 Reported-by: NKoen De Wit <koen.de.wit@oracle.com> Signed-off-by: NGuangyu Sun <guangyu.sun@oracle.com> Signed-off-by: NJosef Bacik <jbacik@fusionio.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Frank Holton 提交于
The kernel log entries for device label %s and device fsid %pU are missing the btrfs: prefix. Add those here. Signed-off-by: NFrank Holton <fholton@gmail.com> Reviewed-by: NDavid Sterba <dsterba@suse.cz> Signed-off-by: NJosef Bacik <jbacik@fusionio.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 David Sterba 提交于
It's still possible to flip the filesystem into RW mode after it's remounted RO due to an abort. There are lots of places that check for the superblock error bit and will not write data, but we should not let the filesystem appear read-write. Signed-off-by: NDavid Sterba <dsterba@suse.cz> Signed-off-by: NJosef Bacik <jbacik@fusionio.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 chandan 提交于
This patch makes it possible to set BTRFS_FS_TREE_OBJECTID as the default subvolume by passing a subvolume id of 0. Signed-off-by: Nchandan <chandan@linux.vnet.ibm.com> Reviewed-by: NDavid Sterba <dsterba@suse.cz> Signed-off-by: NJosef Bacik <jbacik@fusionio.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
In btrfs_sync_file(), if the call to btrfs_log_dentry_safe() returns a negative error (for e.g. -ENOMEM via btrfs_log_inode()), we would return without ending/freeing the transaction. Signed-off-by: NJosef Bacik <jbacik@fusionio.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Stefan Behrens 提交于
The BUG() was replaced by btrfs_error() and return -EIO with the patch "get rid of one BUG() in write_all_supers()", but the missing mutex_unlock() was overlooked. The 0-DAY kernel build service from Intel reported the missing unlock which was found by the coccinelle tool: fs/btrfs/disk-io.c:3422:2-8: preceding lock on line 3374 Signed-off-by: NStefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: NJosef Bacik <jbacik@fusionio.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Josef Bacik 提交于
We don't do the iput when we fail to allocate our delayed delalloc work in __start_delalloc_inodes, fix this. Signed-off-by: NJosef Bacik <jbacik@fusionio.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Josef Bacik 提交于
This isn't used for anything anymore, just remove it. Signed-off-by: NJosef Bacik <jbacik@fusionio.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Josef Bacik 提交于
This is a left over of how we used to wait for ordered extents, which was to grab the inode and then run filemap flush on it. However if we have an ordered extent then we already are holding a ref on the inode, and we just use btrfs_start_ordered_extent anyway, so there is no reason to have an extra ref on the inode to start work on the ordered extent. Thanks, Signed-off-by: NJosef Bacik <jbacik@fusionio.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Josef Bacik 提交于
Forever ago I made the worst case calculator say that we could potentially split into 3 blocks for every level on the way down, which isn't right. If we split we're only going to get two new blocks, the one we originally cow'ed and the new one we're going to split. Thanks, Signed-off-by: NJosef Bacik <jbacik@fusionio.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Josef Bacik 提交于
This reverts commit 70afa399. It is causing performance issues and wasn't actually correct. There were problems with the way we flushed delalloc and that was the real cause of the early enospc. Thanks, Signed-off-by: NJosef Bacik <jbacik@fusionio.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Josef Bacik 提交于
Various people have hit a deadlock when running btrfs/011. This is because when replacing nocow extents we will take the i_mutex to make sure nobody messes with the file while we are replacing the extent. The problem is we are already holding a transaction open, which is a locking inversion, so instead we need to save these inodes we find and then process them outside of the transaction. Further we can't just lock the inode and assume we are good to go. We need to lock the extent range and then read back the extent cache for the inode to make sure the extent really still points at the physical block we want. If it doesn't we don't have to copy it. Thanks, Signed-off-by: NJosef Bacik <jbacik@fusionio.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Josef Bacik 提交于
So if we have dir_index items in the log that means we also have the inode item as well, which means that the inode's i_size is correct. However when we process dir_index'es we call btrfs_add_link() which will increase the directory's i_size for the new entry. To fix this we need to just set the dir items i_size to 0, and then as we find dir_index items we adjust the i_size. btrfs_add_link() will do it for new entries, and if the entry already exists we can just add the name_len to the i_size ourselves. Thanks, Signed-off-by: NJosef Bacik <jbacik@fusionio.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-