This patch adds support for the below mentioned
pixel clocks in Exynos5250.
Without them, following display modes won¡¯t
be supported:

71 MHz 	- 1280x800@60Hz RB
73.25 MHz 	- 800x600@120Hz RB
88.75 MHz 	- 1440x900@60Hz RB
115.5 MHz 	- 1024x768@120Hz RB
119 MHz 	- 1680x1050@60Hz RB
Signed-off-by: NShirish S <s.shirish@samsung.com>
Reviewed-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

The following commit [0] fixed a use-after-free, but left the subdrv open
in the error path.

[0] commit 6ca605f7
drm/exynos: Fix freeing issues in exynos_drm_drv.c
Signed-off-by: NDaniel Kurtz <djkurtz@chromium.org>
Acked-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Since Daniel documented things with a sledge hammer, we got lots of
nice backtraces in suspend/resume operations, I've check the callers
of this and they all seems safe to me,

This fixes one set of warns I reported.
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDave Airlie <airlied@redhat.com>

The locking in drm_fb_helper_initial_config is a bit troublesome for a
few reasons:

- We can't just wrap the entire function up into modeset locks since
  the fbdev registration might call down into fbcon code, which then
  through our ->set_par implementation needs to be able to grab all
  modeset locks. So we'd have a neat deadlock.

- This implies though that all current callers don't hold any modeset
  locks by necessity, so we have free reign to grab any modeset locks
  we need to grab.

- The private state of the fbdev helper doesn't need any protection
  through locks, since once we have the fbdev registered it is mostly
  invariant or protected through the modeset locking in ->set_par and
  other callbacks. We can fully rely on driver having non-racy setup
  sequences here. For the initial config computation we actually may
  not grab locks since drivers which provide their own magic sauce
  (like i915) might need to grab locks themselves.

- We should grab locks though when we probe outputs. Currently there's
  not much risk, but already now userspace could start poking at sysfs
  files and so probe concurrently. I expect that in the future driver
  init will be much more async, and since probing is really
  time-consuming this is a prime candidate.

- We must not hold any crtc->mutex locks while calling probe functions
  since those might need to lock a crtc for e.g. load detection. i915
  is such a driver.

Also it's the probing calls which hit upon piles of new locking
asserts I've recently added in

commit 62ff94a5
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Thu Jan 23 22:18:47 2014 +0100

    drm/crtc-helper: remove LOCKING from kerneldoc

and

commit 63951385
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Thu Jan 23 15:14:15 2014 +0100

    drm/doc: Repleace LOCKING kerneldoc sections in drm_modes.c

Hence the right fix is to grab the mode_config mutex, but only that
and only right around the probe calls.

It seems to be sufficient to shut up all the locking WARNINGs I see on
i915 and nouveau in drm_fb_helper_initial_config.
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

We have two calling contexts for thise function:

- In the crtc helper code itself as part of the ->set_config
  implementation. In this calling context all modeset locks are
  already held, as they should.

- In drivers not implementing fastboot before the fbdev/fbcon setup
  and initialization. This has been added for all drivers in

  commit 76a39dbf
  Author: Daniel Vetter <daniel.vetter@ffwll.ch>
  Date:   Sun Jan 20 23:12:54 2013 +0100

      drm/fb-helper: don't disable everything in initial_config

  In this calling context we do not hold any modeset locks since the
  immediately following call to initialize the fbev emulation grabs
  all these locks themselves.

- There are two exceptions to the above rule: shmob doesn't have fbdev
  emulation support. I've manually checked the callchain up to the
  driver load function and no kms locks are held.

The right fix therefore is to split this helper into an internal and
external version and add the required locking to the function exported
to drivers.

This remedies locking inconsistencies exposed by me adding locking
WARNs as part of the recent kerneldoc abi polishing done in

commit 62ff94a5
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Thu Jan 23 22:18:47 2014 +0100

    drm/crtc-helper: remove LOCKING from kerneldoc

and

commit 63951385
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Thu Jan 23 15:14:15 2014 +0100

    drm/doc: Repleace LOCKING kerneldoc sections in drm_modes.c

v2: It helps when I actually git add the entire thing.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Tested-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Summary of what's included:

- SGX MMU support
- SGX IRQ handling (Page faults and blitter fences)
- Minor Cedarview and Poulsbo unification
- Work queue for ASLE interrupt work
- Various cleanups, style fixes and removal of dead code

* 'gma500-next' of git://github.com/patjak/drm-gma500:
  drm/gma500: remove stub .open/postclose
  drm/gma500: Code cleanup - inline documentation
  drm/gma500: Code cleanup - style fixes
  drm/gma500: Code cleanup - removal of centralized exiting of function
  drm/gma500/cdv: Cedarview display cleanups
  drm/gma500: Unify encoder mode fixup
  drm/gma500: Unify _get_core_freq for cdv and psb
  drm/gma500: Move asle interrupt work into a work task
  drm/gma500: Remove dead code
  drm/gma500: Add backing type and base align to psb_gem_create()
  drm/gma500: Remove unused ioctls
  drm/gma500: Always trap MMU page faults
  drm/gma500: Hook up the MMU
  drm/gma500: Add first piece of blitter code
  drm/gma500: Give MMU code it's own header file
  drm/gma500: Add support for SGX interrupts
  drm/gma500: Make SGX MMU driver actually do something

Not sure why git didn't flag this, but the result of automerge
from 3.14-rc7 screwed up the radeon init procedure.

Reported-by: Fireburn on #radeon
Signed-off-by: NDave Airlie <airlied@redhat.com>

Merge straggling core drm patches.

* 'topic/core-stuff' of git://git.freedesktop.org/git/drm-intel:
  drm: Fix use-after-free in the shadow-attache exit code
  drm/fb-helper: Do the 'max_conn_count' zero check
  drm: Check if the allocation has succeeded before dereferencing newmode
  drm/fb-helper: Use drm_fb_helper_restore_fbdev_mode() in drm_fb_helper_set_par()
  drm/edid: request HDMI underscan by default

The sg_table made when gem cma is created isn't used anywhere. The sgt
of struct drm_gem_cma_object will have only sg_tabel imported.
Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This is the 3rd respin of the drm-anon patches. They allow module unloading, use
the pin_fs_* helpers recommended by Al and are rebased on top of drm-next. Note
that there are minor conflicts with the "drm-minor" branch.

* 'drm-next' of git://people.freedesktop.org/~dvdhrm/linux:
  drm: init TTM dev_mapping in ttm_bo_device_init()
  drm: use anon-inode instead of relying on cdevs
  drm: add pseudo filesystem for shared inodes

Linux 3.14-rc7

Backmerge to help out Intel guys.

Here's my drm documentation update and driver api polish pull request.
Alex reviewed the entire pile, I've applied a little bit of spelling
polish in a few places since then and otherwise the Usual Suspects (David,
Rob, ...) don't seem up to have another look at it (I've poked them on
irc). So I think it's as good as it gets ;-)

Note that I've dropped the final imx breaker patch since that's blocked on
imx getting sane. Once that's landed I'll ping you to pick up that
straggler.

* 'drm-docs' of ssh://people.freedesktop.org/~danvet/drm: (34 commits)
  drm/imx: remove drm_mode_connector_detach_encoder harder
  drm: kerneldoc polish for drm_crtc.c
  drm: kerneldoc polish for drm_crtc_helper.c
  drm: drop error code for drm_helper_resume_force_mode
  drm/crtc-helper: remove LOCKING from kerneldoc
  drm: remove return value from drm_helper_mode_fill_fb_struct
  drm/doc: Fix misplaced </para>
  drm: remove drm_display_mode->private_size
  drm: polish function kerneldoc for drm_modes.[hc]
  drm/modes: drop maxPitch from drm_mode_validate_size
  drm/modes: drop return value from drm_display_mode_from_videomode
  drm/modes: remove drm_mode_height/width
  drm: extract drm_modes.h for drm_crtc.h functions
  drm: move drm_mode related functions into drm_modes.c
  drm/doc: Repleace LOCKING kerneldoc sections in drm_modes.c
  drm/doc: Integrate drm_modes.c kerneldoc
  drm/kms: rip out drm_mode_connector_detach_encoder
  drm/doc: Add function reference documentation for drm_mm.c
  drm/doc: Overview documentation for drm_mm.c
  drm/mm: Remove MM_UNUSED_TARGET
  ...

- fine-grained display power domains for byt (Imre)
- runtime pm prep patches for !hsw from Paulo
- WiZ hashing flag updates from Ville
- ppgtt setup cleanup and enabling of full 4G range on bdw (Ben)
- fixes from Jesse for the inherited intial config code
- gpu reset code improvements from Mika
- per-pipe num_planes refactoring from Damien
- stability fixes around bdw forcewake handling and other bdw w/a from Mika
  Ken
- and as usual a pile of smaller fixes all over

* 'drm-intel-next' of git://git.freedesktop.org/git/drm-intel: (107 commits)
  drm/i915: Go OCD on the Makefile
  drm/i915: Implement command buffer parsing logic
  drm/i915: Refactor shmem pread setup
  drm/i915: Avoid div by zero when pixel clock is large
  drm/i915: power domains: add vlv power wells
  drm/i915: factor out intel_set_cpu_fifo_underrun_reporting_nolock
  drm/i915: vlv: factor out valleyview_display_irq_install
  drm/i915: sanity check power well sw state against hw state
  drm/i915: factor out reset_vblank_counter
  drm/i915: sanitize PUNIT register macro definitions
  drm/i915: vlv: keep first level vblank IRQs masked
  drm/i915: check pipe power domain when reading its hw state
  drm/i915: check port power domain when reading the encoder hw state
  drm/i915: get port power domain in connector detect handlers
  drm/i915: add port power domains
  drm/i915: add noop power well handlers instead of NULL checking them
  drm/i915: split power well 'set' handler to separate enable/disable/sync_hw
  drm/i915: add init power domain to always-on power wells
  drm/i915: move power domain macros to intel_pm.c
  drm/i915: Disable full ppgtt by default
  ...

Conflicts:
	drivers/gpu/drm/i915/Makefile

Makefile cleanup in drm-intel-next conflicts with a build-fix to move
intel_opregion under CONFIG_ACPI.
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

These are unused and can safely be dropped. DRM core verifies they're
non-NULL before it calls them.

Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: NDavid Herrmann <dh.herrmann@gmail.com>
Signed-off-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com>

Improve readability by adding/changing inline documentation
Signed-off-by: NArthur Borsboom <arthurborsboom@gmail.com>
Signed-off-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com>

Code cleanup by following i915 constant/variable names and ordering
Code cleanup by following directions from kernel doc: Codingstyle
Code cleanup by following directions from kernel doc: DRM
Signed-off-by: NArthur Borsboom <arthurborsboom@gmail.com>
Signed-off-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com>

Removed centralized exiting of function (goto statement), since it was
the only used in one single location with only a return statement.
Signed-off-by: NArthur Borsboom <arthurborsboom@gmail.com>
Signed-off-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com>

Signed-off-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com>

Signed-off-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com>

Signed-off-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com>

Previously the backlight code was called from IRQ context which isn't
allowed. This patch moves all the asle work into a work task which takes
care of the locking bug reported by users.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=64221Signed-off-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com>

The gma500 driver sets DRIVER_GEM unconditionally, so testing for the
absence of the feature will always fail.
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com>

We'll need this for our gem create ioctl in a later patch.
Signed-off-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com>

All of these ioctls are unused and most of them just duplicate what drm
already provides.
Signed-off-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com>

Signed-off-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com>

Properly init the MMU and add MMU entries when adding GTT entries
Signed-off-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com>

Right now, all we need to know about the blitter is that it's not doing
anything that can be messed up when fiddling with MMU mappings.
Signed-off-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com>

Signed-off-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com>

Add 2D blit status and MMU fault interrupts to the IRQ handler.
Signed-off-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com>

Old MMU code never wrote PDs or PTEs to any registers. Now we do, and
that's a good start.
Signed-off-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com>

This regression has been introduced in

commit b3f2333d
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Wed Dec 11 11:34:31 2013 +0100

    drm: restrict the device list for shadow attached drivers
Reported-by: NDave Jones <davej@redhat.com>
Cc: Dave Jones <davej@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NDavid Herrmann <dh.herrmann@gmail.com>

Since we cannot make sure the 'max_conn_count' will always be none
zero from the users, and then if max_conn_count equals to zero, the
kcalloc() will return ZERO_SIZE_PTR, which equals to ((void *)16).

So this patch fix this with just doing the 'max_conn_count' zero check
in the front of drm_fb_helper_init().
Signed-off-by: NXiubo Li <Li.Xiubo@freescale.com>
CC: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We allocate memory in drm_display_mode_from_vic_index() and use it
without checking the pointer is valid. Fix that.
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Use drm_fb_helper_restore_fbdev_mode() in drm_fb_helper_set_par() to
make sure extra planes get disabled whenever fbcon takes over.

Otherwise the code in drm_fb_helper_set_par() was already doing the
exact same thing as drm_fb_helper_restore_fbdev_mode(), so this doesn't
change the behaviour in any other way.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This series contains several cleanups for the DRM-minor handling. All but the
last one reviewed by Daniel and tested by Thierry. Initially, the series
included patches to convert minor-handling to a common base-ID, but have
been NACKed by Daniel so I dropped them and only included the main part in the
last patch. With this in place, drm_global_mutex is no longer needed for
minor-handling (but still for device unregistration..).
There are some pending patches that try to remove the global mutex entirely, but
they need some more reviews and thus are not included.
* 'drm-minor' of git://people.freedesktop.org/~dvdhrm/linux:
  drm: make minors independent of global lock
  drm: inline drm_minor_get_id()
  drm: coding-style fixes in minor handling
  drm: remove redundant minor->device field
  drm: remove unneeded #ifdef CONFIG_DEBUGFS
  drm: rename drm_unplug/get_minor() to drm_minor_register/unregister()
  drm: move drm_put_minor() to drm_minor_free()
  drm: allocate minors early
  drm: add minor-lookup/release helpers
  drm: provide device-refcount
  drm: turn DRM_MINOR_* into enum
  drm: remove unused DRM_MINOR_UNASSIGNED
  drm: skip redundant minor-lookup in open path
  drm: group dev-lifetime related members

This branch includes 6 minor fixes mainly for udl. Everything non-trivial was
reviewed by Daniel and the patches have been on the list for quite some time.

* 'drm-fixes' of git://people.freedesktop.org/~dvdhrm/linux:
  drm/gem: dont init "ret" in drm_gem_mmap()
  drm/crtc: add sanity checks to create_dumb()
  drm/gem: free vma-node during object-cleanup
  drm/gem: fix indentation
  drm/udl: fix Bpp calculation in dumb_create()
  drm/udl: fix error-path when damage-req fails

Pull scheduler fixes from Ingo Molnar:
 "Three small fixes"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/clock: Prevent tracing recursion in sched_clock_cpu()
  stop_machine: Fix^2 race between stop_two_cpus() and stop_cpus()
  sched/deadline: Deny unprivileged users to set/change SCHED_DEADLINE policy

Pull perf fixes from Ingo Molnar:
 "Misc smaller fixes"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86: Fix leak in uncore_type_init failure paths
  perf machine: Use map as success in ip__resolve_ams
  perf symbols: Fix crash in elf_section_by_name
  perf trace: Decode architecture-specific signal numbers