The mms114 binding [1] specifies that the 'x' and 'y' should be
called respectively 'touchscreen-size-x' and 'touchscreen-size-y'
in coherence with the touchscreen [2] binding.

Update the mms114 node for trats2 and trats dts according to the
binding.

[1] Documentation/devicetree/bindings/input/touchscreen/mms114.txt
[2] Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt
Signed-off-by: NAndi Shyti <andi.shyti@samsung.com>
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>

There are 3 scaler devices in Exynos5420 SoCs, all are a part of MSCL
power domain. MSCL power domain and SYSMMU controllers (two per each
scaler device) have been already added to exynos5420.dtsi earlier,
so bind them to newly added devices.
Signed-off-by: NAndrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: NInki Dae <inki.dae@samsung.com>
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>

The DTC was warning a lot about unit names etc, I think I fixed
them all. Stopping to include skeleton.dtsi fixes the last one.
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

The NAS4220B has the second ATA interface up and running.
Activate it in the device tree.
Signed-off-by: NRoman Yeryomin <roman@advem.lv>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

These machines need to be booted from very specific harddisk
partitions (as the D-Link DNS-313 boots specifically from
partition 4). Add the proper bootargs so that everything works
smoothly.
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

The flash on the DNS-313 needs to be probed as JEDEC, it does
not conform to the common CFI standard.
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Using the blue LED for disk read and the orange LED for
disk write gives a better user experience.
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

We just used one LED for "disk activity" but using the green
LED for disk read and the red LED for disk write gives a way
better user experience.
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

"debounce_interval" was never supported.
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

This new syntax is slightly better designed & uses "compatible" string.
For details see Documentation/devicetree/bindings/mtd/partition.txt .
Signed-off-by: NRafał Miłecki <rafal@milecki.pl>
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>

This matches licensing used by other BCM5301X files and is preferred as:
1) GPL 2.0+ makes is clearly compatible with Linux kernel
2) MIT is also permissive but preferred over ISC

This file were created and ever touched by a group of three people only:
Álvaro, Hauke and me.
Signed-off-by: NRafał Miłecki <rafal@milecki.pl>
Acked-by: NHauke Mehrtens <hauke@hauke-m.de>
Acked-by: NÁlvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>

It's an access point based on BCM47094 SoC with two BCM4366E wireless
chipsets.
Signed-off-by: NDan Haab <dan.haab@luxul.com>
Acked-by: NRafał Miłecki <rafal@milecki.pl>
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>

Luxul XWR-3150 is a wireless router similar to the XWR-3100 except:
1) It has more RAM
2) Its NAND controller in running in BCH8 mode
3) LAN ports LEDs are hardware controlled
Signed-off-by: NDan Haab <dan.haab@luxul.com>
Acked-by: NRafał Miłecki <rafal@milecki.pl>
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>

Commit d50f4630 ("arm: dts: Remove p1010-flexcan compatible from imx
series dts") removed the fallback compatible "fsl,p1010-flexcan" from
the imx device trees. As the flexcan cores on i.MX25, i.MX35 and i.MX53
are identical, introduce the first as fallback for the two latter ones.

Fixes: d50f4630 ("arm: dts: Remove p1010-flexcan compatible from imx series dts")
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: linux-stable <stable@vger.kernel.org> # >= v4.16
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

Remove the usage of skeleton.dtsi to fix the DTC warnings:

    arch/arm/boot/dts/s3c6410-mini6410.dtb: Warning (unit_address_vs_reg):
        /memory: node has a reg or ranges property, but no unit name
    arch/arm/boot/dts/s3c6410-smdk6410.dtb: Warning (unit_address_vs_reg):
        /memory: node has a reg or ranges property, but no unit name
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>

Fix DTC warnings:

    arch/arm/boot/dts/s3c2416-smdk2416.dtb: Warning (avoid_unnecessary_addr_size):
        /cpus: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property
    arch/arm/boot/dts/s3c2416-smdk2416.dtb: Warning (avoid_unnecessary_addr_size):
        /clocks: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>

Remove the usage of skeleton.dtsi to fix the DTC warning:

    arch/arm/boot/dts/s3c2416-smdk2416.dtb: Warning (unit_address_vs_reg):
        /memory: node has a reg or ranges property, but no unit name
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>

This matches licensing used by other BCM5301X files and is preferred as:
1) GPL 2.0+ makes is clearly compatible with Linux kernel
2) MIT is also permissive but preferred over ISC

These files were created and ever touched by a group of four people
only: Felix, INAGAKI, Hauke and me.
Signed-off-by: NRafał Miłecki <rafal@milecki.pl>
Acked-by: NFelix Fietkau <nbd@nbd.name>
Acked-by: NINAGAKI Hiroshi <musashino.open@gmail.com>
Acked-by: NHauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>

The 66AK2G evm has support for dcan.
Add nodes and pinmuxes for dcan0 and dcan1.
Signed-off-by: NFaiz Abbas <faiz_abbas@ti.com>
Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com>

The U8540 was an evolved version of the U8500, but it was never
mass produced or put into products, only reference designs exist.
The upstream support was never completed and it is unlikely that
this will happen so drop the support for now to simplify
maintenance of the U8500.

Cc: Loic Pallardy <loic.pallardy@st.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

"debounce_interval" was never supported.
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

LPTimer pwm cells should be updated to 3, to allow initialization of
channel, period and polarity.
Signed-off-by: NFabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: NAlexandre Torgue <alexandre.torgue@st.com>

Add I2C1 support for stm32h743i-eval Board
Signed-off-by: NPierre-Yves MORDRET <pierre-yves.mordret@st.com>
Signed-off-by: NAlexandre Torgue <alexandre.torgue@st.com>

Add I2C support for STM32H743 SoC
Signed-off-by: NPierre-Yves MORDRET <pierre-yves.mordret@st.com>
Signed-off-by: NAlexandre Torgue <alexandre.torgue@st.com>

Add I2C1 support for stm32f746-disco Board
Signed-off-by: NPierre-Yves MORDRET <pierre-yves.mordret@st.com>
Signed-off-by: NAlexandre Torgue <alexandre.torgue@st.com>

Add I2C1 support for stm32f769-disco Board
Signed-off-by: NPierre-Yves MORDRET <pierre-yves.mordret@st.com>
Signed-off-by: NAlexandre Torgue <alexandre.torgue@st.com>

Append 3 additional I2C instance for STM32F746 SoC.
Signed-off-by: NPierre-Yves MORDRET <pierre-yves.mordret@st.com>
Signed-off-by: NAlexandre Torgue <alexandre.torgue@st.com>

Add display support on the stm32f469-disco board.
Signed-off-by: NPhilippe Cornu <philippe.cornu@st.com>
Signed-off-by: NAlexandre Torgue <alexandre.torgue@st.com>

In the stm32f4 family, mipi dsi is only supported on stm32f469.
So add a new stm32f469 dtsi file & add mipi dsi support inside.
Signed-off-by: NPhilippe Cornu <philippe.cornu@st.com>
Signed-off-by: NAlexandre Torgue <alexandre.torgue@st.com>

Use gpio bindings for vcc5v_otg.
Signed-off-by: NPhilippe Cornu <philippe.cornu@st.com>
Signed-off-by: NAlexandre Torgue <alexandre.torgue@st.com>

Since commit 83a86fbb ("irqchip/gic: Loudly complain about
the use of IRQ_TYPE_NONE"), a warning is raised if IRQ_TYPE_NONE is used.
So we use IRQ_TYPE_LEVEL_HIGH for usart nodes instead of IRQ_TYPE_NONE.
Signed-off-by: NAlexandre Torgue <alexandre.torgue@st.com>
Tested-by: NFabrice Gasnier <fabrice.gasnier@st.com>

Fix DTC warnings for stm32mp157:

Warning (unit_address_vs_reg): /soc/pin-controller: node has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): /soc/pin-controller/uart4@0: node has a unit name, but no reg property
Warning (unit_address_vs_reg): /soc/pin-controller-z: node has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): /memory: node has a reg or ranges property, but no unit name
Signed-off-by: NAlexandre Torgue <alexandre.torgue@st.com>

This patch adds flash nor on qspi. Each flash is
connected in quad mode and has its own chip select.
Signed-off-by: NLudovic Barre <ludovic.barre@st.com>
Signed-off-by: NAlexandre Torgue <alexandre.torgue@st.com>

This patch adds qspi support on stm32mp157c,
read in memory mapped, write in indirect mode.
Signed-off-by: NLudovic Barre <ludovic.barre@st.com>
Signed-off-by: NAlexandre Torgue <alexandre.torgue@st.com>

This patch enables cec node on stm32mp157c-ev1 board
Signed-off-by: NYannick Fertre <yannick.fertre@st.com>
Signed-off-by: NAlexandre Torgue <alexandre.torgue@st.com>

This patch adds cec support on stm32mp157c eval board.
Signed-off-by: NYannick Fertre <yannick.fertre@st.com>
Signed-off-by: NAlexandre Torgue <alexandre.torgue@st.com>

Add cec support on stm32mp157c
Signed-off-by: Nyannick fertre <yannick.fertre@st.com>
Signed-off-by: NAlexandre Torgue <alexandre.torgue@st.com>

Add support for USBH (USB Host) to STM32MP157C SoC.
USBH is a USB Host controller supporting the standard registers used for
full- and low-speed (OHCI controller) and high-speed (EHCI controller).
Signed-off-by: NAmelie Delaunay <amelie.delaunay@st.com>

This patch enables USBPHYC (USB PHY Controller) on stm32mp157c-ev1.
This enables the two usbphyc usb2 ports.
Signed-off-by: NAmelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: NAlexandre Torgue <alexandre.torgue@st.com>

USBPHYC ports require 3 supplies: 3v3, 1v1 and 1v8.
This patch adds the corresponding properties to usbphyc ports on
stm32mp157c-ed1 board.
Signed-off-by: NAmelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: NAlexandre Torgue <alexandre.torgue@st.com>