- FBINFO_CAN_FORCE_OUTPUT has been a lie ever since we nerfed&removed
  the entire panic handling code in our fbdev emulation. We might
  restore kms panic output, but not through the bazillion of legacy
  code layers called fbdev/fbcon, there's just no way to make that
  work safely.

- With the module check change FBINFO_DEFAULT is always 0, so can be
  removed too.

That removes another change to cargo-cult stuff in kms drivers, yay!
Reviewed-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170706125735.28299-5-daniel.vetter@ffwll.chSigned-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

HDMI 1.4b support the CEA video modes as per range of CEA-861-D (VIC 1-64).
For any other mode, the VIC filed in AVI infoframes should be 0.
HDMI 2.0 sinks, support video modes range as per CEA-861-F spec, which is
extended to (VIC 1-107).

This patch adds a bool input variable, which indicates if the connected
sink is a HDMI 2.0 sink or not. This will make sure that we don't pass a
HDMI 2.0 VIC to a HDMI 1.4 sink.

This patch touches all drm drivers, who are callers of this function
drm_hdmi_avi_infoframe_from_display_mode but to make sure there is
no change in current behavior, is_hdmi2 is kept as false.

In case of I915 driver, this patch:
- checks if the connected display is HDMI 2.0.
- HDMI infoframes carry one of this two type of information:
	- VIC for 4K modes for HDMI 1.4 sinks
	- S3D information for S3D modes
  As CEA-861-F has already defined VICs for 4K videomodes, this
  patch doesn't allow sending HDMI infoframes for HDMI 2.0 sinks,
  until the mode is 3D.

Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Jose Abreu <jose.abreu@synopsys.com>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>

PS: This patch touches a few lines in few files, which were
already above 80 char, so checkpatch gives 80 char warning again.
- gpu/drm/omapdrm/omap_encoder.c
- gpu/drm/i915/intel_sdvo.c

V2: Rebase, Added r-b from Andrzej
V3: Addressed review comment from Ville:
	- Do not send VICs in both AVI-IF and HDMI-IF
	  send only one of it.
V4: Rebase
V5: Added r-b from Neil.
    Addressed review comments from Ville
    - Do not block HDMI vendor IF, instead check for VIC while
      handling AVI infoframes
V6: Rebase
V7: Rebase
Reviewed-by: NAndrzej Hajda <a.hajda@samsung.com>
Reviewed-by: NNeil Armstrong <narmstrong@baylibre.com>
Signed-off-by: NShashank Sharma <shashank.sharma@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1499960000-9232-2-git-send-email-shashank.sharma@intel.comSigned-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>

Move the modeset locking from drivers into FB helpers.

v2: Also handle intel_connector_add_to_fbdev.

v3: Prevent race in intel_dp_mst with ->detect (Maarten)

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Tested-by: NJohn Stultz <john.stultz@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com> (v1)
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170704151833.17304-2-daniel.vetter@ffwll.ch

Both drivers shut down all crtc beforehand already, which will shut up
any pending vblank (the only thing vblank_cleanup really does is
disable the disable timer). Hence we don't need this here and can
remove it.

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170621082850.13224-2-daniel.vetter@ffwll.ch

Fixes resume from suspend.

bug: https://bugzilla.kernel.org/show_bug.cgi?id=196121Reported-by: NPrzemek <soprwa@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Disable PX on these systems.

bug: https://bugs.freedesktop.org/show_bug.cgi?id=101491Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The magic switching between proper pci driver and shadow-attach isn't
useful anymore since there's no ums+kms drivers left. Let's split this
up properly, calling pci_register_driver for kms drivers and renaming
the shadow-attach init to drm_legacy_pci_init/exit.
Acked-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170524145212.27837-6-daniel.vetter@ffwll.ch

The only special-case is pci devices, and we can easily handle this in
the core. Do so and drop a pile of boilerplate from drivers.
Acked-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170524145212.27837-5-daniel.vetter@ffwll.ch

Commit e6b9a6c8
("drm/radeon: Make display watermark calculations more accurate")
made watermark calculations more accurate, but not for > 4k
resolutions on 32-Bit architectures, as it introduced an integer
overflow for those setups and resolutions.

Fix this by proper u64 casting and division.
Signed-off-by: NMario Kleiner <mario.kleiner.de@gmail.com>
Reported-by: NBen Hutchings <ben.hutchings@codethink.co.uk>
Fixes: e6b9a6c8 ("drm/radeon: Make display watermark calculations more accurate")
Cc: Ben Hutchings <ben.hutchings@codethink.co.uk>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The DPB must be in VRAM, but not in the first segment.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Tested-by: NArthur Marsh <arthur.marsh@internode.on.net>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Even if CONFIG_DRM_AMDGPU_CIK is enabled.

There is no feature parity yet for CIK, in particular amdgpu doesn't
support HDMI/DisplayPort audio without DC.

v2:
* Clarify the lack of feature parity being related to HDMI/DP audio.
* Fix "SI" typo in DRM_AMDGPU_CIK help entry.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com>

This will allow amdgpu-pro / other out-of-tree amdgpu builds to make use
of these options for using the out-of-tree amdgpu driver instead of the
in-tree radeon driver in a clean way.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com>

If AMDGPU supports SI, add a module parameter to control SI
support in radeon. It's on by default in radeon, while it will be
off by default in AMDGPU as long as SI support is experimental.
Signed-off-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Acked-by: NMichel Dänzer <michel.daenzer@amd.com>

Update the KGD to KFD interface to allow sharing pipes with queue
granularity instead of pipe granularity.

This allows for more interesting pipe/queue splits.

v2: fix overflow check for res.queue_mask
v3: fix shift overflow when setting res.queue_mask
v4: fix comment in is_pipeline_enabled()
v5: clamp res.queue_mask to the first MEC only
Reviewed-by: NEdward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAndres Rodriguez <andresx7@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Take ownership of pipe initialization away from KFD.

Note that hpd_eop_gpu_addr was already large enough to accomodate all
pipes.
Reviewed-by: NEdward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAndres Rodriguez <andresx7@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Same as the previous patch, but for pageflipping now. This also lets us
clear up the copy paste for vblank/vline IRQs.

Changes since v1:
- Preserve the order all registers are written back
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NLyude <lyude@redhat.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Same as the previous patch, but now for handling HDMI audio interrupts.

Changes since v1:
- Preserve the order we write back all registers
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NLyude <lyude@redhat.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The current code here is really, really bad. A huge amount of it looks
to be copy pasted, it has some weird hatred of arrays and code sharing,
switch cases everywhere for things that really don't need them, and it
makes the file seem immensely more complex then it actually is. This is
a pain for maintanence, and is vulnerable to more weird irq handling
bugs.

So, let's start cleaning this up a bit. Modify all of the IRQ handlers
for evergreen/si so that they just use for loops. As well, we add a
helper function radeon_irq_kms_set_irq_n_enabled(), whose purpose is
just to update the state of registers that enable/disable interrupts
while printing any changes to the set of enabled interrupts to the
kernel log.

Note in this commit, since vblank/vline irq acking is intertwined with
page flip irq acking, we can't cut out all of the copy paste in
evergreen/si_irq_ack() just yet.

Changes since v1:
- Preserve order we write back all registers
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NLyude <lyude@redhat.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

If AMDGPU supports CIK, add a module parameter to control CIK
support in radeon. It's off by default in radeon, while it will be
on by default in AMDGPU.
Signed-off-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Acked-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We end up reading the interrupt register for HPD5, and then writing it
to HPD6 which on systems without anything using HPD5 results in
permanently disabling hotplug on one of the display outputs after the
first time we acknowledge a hotplug interrupt from the GPU.

This code is really bad. But for now, let's just fix this. I will
hopefully have a large patch series to refactor all of this soon.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NLyude <lyude@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Even if the vblank period would allow it, it still seems to
be problematic on some cards.

v2: fix logic inversion (Nils)

bug: https://bugs.freedesktop.org/show_bug.cgi?id=96868

Cc: stable@vger.kernel.org
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We end up reading the interrupt register for HPD5, and then writing it
to HPD6 which on systems without anything using HPD5 results in
permanently disabling hotplug on one of the display outputs after the
first time we acknowledge a hotplug interrupt from the GPU.

This code is really bad. But for now, let's just fix this. I will
hopefully have a large patch series to refactor all of this soon.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NLyude <lyude@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Even if the vblank period would allow it, it still seems to
be problematic on some cards.

v2: fix logic inversion (Nils)

bug: https://bugs.freedesktop.org/show_bug.cgi?id=96868

Cc: stable@vger.kernel.org
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Nicolai Stange reports the following oops which is caused by
dereferencing rdev->pdev before it's subsequently set by
radeon_device_init().  Fix it.

  BUG: unable to handle kernel NULL pointer dereference at 00000000000007cb
  IP: radeon_driver_load_kms+0xeb/0x230 [radeon]
  ...
  Call Trace:
   drm_dev_register+0x146/0x1d0 [drm]
   drm_get_pci_dev+0x9a/0x180 [drm]
   radeon_pci_probe+0xb8/0xe0 [radeon]
   local_pci_probe+0x45/0xa0
   pci_device_probe+0x14f/0x1a0
   driver_probe_device+0x29c/0x450
   __driver_attach+0xdf/0xf0
   ? driver_probe_device+0x450/0x450
   bus_for_each_dev+0x6c/0xc0
   driver_attach+0x1e/0x20
   bus_add_driver+0x170/0x270
   driver_register+0x60/0xe0
   ? 0xffffffffc0508000
   __pci_register_driver+0x4c/0x50
   drm_pci_init+0xeb/0x100 [drm]
   ? vga_switcheroo_register_handler+0x6a/0x90
   ? 0xffffffffc0508000
   radeon_init+0x98/0xb6 [radeon]
   do_one_initcall+0x52/0x1a0
   ? __vunmap+0x81/0xb0
   ? kmem_cache_alloc_trace+0x159/0x1b0
   ? do_init_module+0x27/0x1f8
   do_init_module+0x5f/0x1f8
   load_module+0x27ce/0x2be0
   SYSC_finit_module+0xdf/0x110
   ? SYSC_finit_module+0xdf/0x110
   SyS_finit_module+0xe/0x10
   do_syscall_64+0x67/0x150
   entry_SYSCALL64_slow_path+0x25/0x25

Fixes: 7ffb0ce3 ("drm/radeon: Don't register Thunderbolt eGPU with vga_switcheroo")
Reported-and-tested-by: NNicolai Stange <nicstange@gmail.com>
Signed-off-by: NLukas Wunner <lukas@wunner.de>
Link: http://patchwork.freedesktop.org/patch/msgid/cfb91ba052af06117137eec0637543a2626a7979.1495135190.git.lukas@wunner.de

Now that drm_[cm]alloc* helpers are simple one line wrappers around
kvmalloc_array and drm_free_large is just kvfree alias we can drop
them and replace by their native forms.

This shouldn't introduce any functional change.

Changes since v1
- fix typo in drivers/gpu//drm/etnaviv/etnaviv_gem.c - noticed by 0day
  build robot
Suggested-by: NDaniel Vetter <daniel@ffwll.ch>
Signed-off-by: Michal Hocko <mhocko@suse.com>drm: drop drm_[cm]alloc* helpers
[danvet: Fixup vgem which grew another user very recently.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: NChristian König <christian.koenig@amd.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170517122312.GK18247@dhcp22.suse.cz

Include <drm/*.h> instead of relative path from include/drm, then
remove the -Iinclude/drm compiler flag.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1493009447-31524-14-git-send-email-yamada.masahiro@socionext.com

Encountered a dozen of exact same backtraces when mesa's
pb_cache_release_all_buffers is called after that a gpu reset failed.

v2: Remove superfluous error message added in v1.

bug: https://bugs.freedesktop.org/show_bug.cgi?id=96271Signed-off-by: NJulien Isorce <jisorce@oblong.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

If we restrict this helper to only kms drivers (which is the case) we
can look up the correct mode easily ourselves. But it's a bit tricky:

- All legacy drivers look at crtc->hwmode. But that is updated already
  at the beginning of the modeset helper, which means when we disable
  a pipe. Hence the final timestamps might be a bit off. But since
  this is an existing bug I'm not going to change it, but just try to
  be bug-for-bug compatible with the current code. This only applies
  to radeon&amdgpu.

- i915 tries to get it perfect by updating crtc->hwmode when the pipe
  is off (i.e. vblank->enabled = false).

- All other atomic drivers look at crtc->state->adjusted_mode. Those
  that look at state->requested_mode simply don't adjust their mode,
  so it's the same. That has two problems: Accessing crtc->state from
  interrupt handling code is unsafe, and it's updated before we shut
  down the pipe. For nonblocking modesets it's even worse.

For atomic drivers try to implement what i915 does. To do that we add
a new hwmode field to the vblank structure, and update it from
drm_calc_timestamping_constants(). For atomic drivers that's called
from the right spot by the helper library already, so all fine. But
for safety let's enforce that.

For legacy driver this function is only called at the end (oh the
fun), which is broken, so again let's not bother and just stay
bug-for-bug compatible.

The  benefit is that we can use drm_calc_vbltimestamp_from_scanoutpos
directly to implement ->get_vblank_timestamp in every driver, deleting
a lot of code.

v2: Completely new approach, trying to mimick the i915 solution.

v3: Fixup kerneldoc.

v4: Drop the WARN_ON to check that the vblank is off, atomic helpers
currently unconditionally call this. Recomputing the same stuff should
be harmless.

v5: Fix typos and move misplaced hunks to the right patches (Neil).

v6: Undo hunk movement (kbuild).

Cc: Mario Kleiner <mario.kleiner@tuebingen.mpg.de>
Cc: Eric Anholt <eric@anholt.net>
Cc: Rob Clark <robdclark@gmail.com>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: NNeil Armstrong <narmstrong@baylibre.com>
Acked-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170509140329.24114-4-daniel.vetter@ffwll.ch

It's overkill to have a flag parameter which is essentially used just
as a boolean. This takes care of core + adjusting drivers.

Adjusting the scanout position callback is a bit harder, since radeon
also supplies it's own driver-private flags in there.

v2: Fixup misplaced hunks (Neil).

v3: kbuild says v1 was better ...

Cc: Mario Kleiner <mario.kleiner@tuebingen.mpg.de>
Cc: Eric Anholt <eric@anholt.net>
Cc: Rob Clark <robdclark@gmail.com>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NNeil Armstrong <narmstrong@baylibre.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170509140329.24114-2-daniel.vetter@ffwll.ch

There's really no reason for anything more:
- Calling this while the crtc vblank stuff isn't set up is a driver
  bug. Those places alrready DRM_ERROR.
- Calling this when the crtc is off is either a driver bug (calling
  drm_crtc_handle_vblank at the wrong time) or a core bug (for
  anything else). Again, we DRM_ERROR.
- EINVAL is checked at higher levels already, and if we'd use struct
  drm_crtc * instead of (dev, pipe) it would be real obvious that
  those are again core bugs.

The only valid failure mode is crap hardware that couldn't sample a
useful timestamp, to ask the core to just grab a not-so-accurate
timestamp. Bool is perfectly fine for that.

v2: Also fix up the one caller, I lost that in the shuffling (Jani).

v3: Fixup commit message (Neil).

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Mario Kleiner <mario.kleiner@tuebingen.mpg.de>
Cc: Eric Anholt <eric@anholt.net>
Cc: Rob Clark <robdclark@gmail.com>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: NNeil Armstrong <narmstrong@baylibre.com>
Acked-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170509140329.24114-1-daniel.vetter@ffwll.ch

set_memory_* functions have moved to set_memory.h.  Switch to this
explicitly.

[akpm@linux-foundation.org: track drivers/gpu/drm/i915/i915_gem_gtt.c linux-next changes]
Link: http://lkml.kernel.org/r/1488920133-27229-8-git-send-email-labbott@redhat.comSigned-off-by: NLaura Abbott <labbott@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Avoid big roundoff errors in scanline/hactive durations for
high pixel clocks, especially for >= 500 Mhz, and thereby
program more accurate display fifo watermarks.

This is a port of the corresponding amdgpu patch.

Implemented for DCE 4,6,8.
Tested on Evergreen/DCE-4 with Radeon HD-5770.
Signed-off-by: NMario Kleiner <mario.kleiner.de@gmail.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

At dot clocks > approx. 250 Mhz, some of these calcs will overflow and
cause miscalculation of latency watermarks, and for some overflows also
divide-by-zero driver crash. Make calcs more overflow resistant.

This is a direct port of the corresponding patch from amdgpu-kms,
copy-paste for cik from dce-8 and si from dce-6, with a slightly
simpler variant for evergreen dce-4/5.

Only tested on DCE-4 evergreen with a Radeon HD-5770.
Signed-off-by: NMario Kleiner <mario.kleiner.de@gmail.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Function radeon_fence_emit() returns -ENOMEM if there is no enough
memory. And in this case, function radeon_ring_unlock_undo() rather than
function radeon_ring_unlock_commit() should be called. However, in
function radeon_test_create_and_emit_fence(), the return value of
radeon_fence_emit() is ignored. This patch adds the check.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NPan Bian <bianpan2016@163.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Function radeon_ring_lock() returns an errno on failure, and its return
value should be validated. However, in functions r420_cp_errata_init()
and r420_cp_errata_fini(), its return value is not checked. This patch
adds the checks.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NPan Bian <bianpan2016@163.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Seems to be mandatory for WMV playback.

Bugs: https://bugs.freedesktop.org/show_bug.cgi?id=100510Signed-off-by: NChristian König <christian.koenig@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The RV3xx settings were getting applied to all older asics
rather than just RV3xx.
Reported-by: NDavid Binderman <dcb314@hotmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

BOs shared via dma-buf, either imported or exported, cannot sensibly be migrated to VRAM
without breaking the dma-buf sharing. Refuse userspace requests to migrate to VRAM,
ensure such BOs are not migrated during command submission, and refuse to pin them
to VRAM.

v2: Don't pin BOs in GTT. Instead, refuse to migrate BOs to VRAM.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NChristopher James Halse Rogers <christopher.halse.rogers@canonical.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NChristopher James Halse Rogers <christopher.halse.rogers@canonical.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Any use of the framebuffer will migrate it to VRAM, which is not sensible for
an imported dma-buf.

v2: Use DRM_DEBUG_KMS to prevent userspace accidentally spamming dmesg.
Reviewed-by: NMichel Dänzer <michel.daenzer@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NChristopher James Halse Rogers <christopher.halse.rogers@canonical.com>
CC: amd-gfx@lists.freedesktop.org
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>