- 16 5月, 2019 26 次提交
-
-
由 Yihao Wu 提交于
Commit b7dbcc0e "NFSv4.1: Fix a race where CB_NOTIFY_LOCK fails to wake a waiter" found this bug. However it didn't fix it. This commit replaces schedule_timeout() with wait_woken() and default_wake_function() with woken_wake_function() in function nfs4_retry_setlk() and nfs4_wake_lock_waiter(). wait_woken() uses memory barriers in its implementation to avoid potential race condition when putting a process into sleeping state and then waking it up. Fixes: a1d617d8 ("nfs: allow blocking locks to be awoken by lock callbacks") Cc: stable@vger.kernel.org #4.9+ Signed-off-by: NYihao Wu <wuyihao@linux.alibaba.com> Reviewed-by: NJeff Layton <jlayton@kernel.org> Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
-
由 Jiufei Xue 提交于
So far writeback control is supported for cgroup v1 interface. However it also has some restrictions, so introduce a new kernel boot parameter to control the behavior which is disabled by default. Users can enable the writeback control for cgroup v1 with the command line "cgwb_v1". Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com> Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
-
由 luanshi 提交于
There might have tons of files queued in the writeback, awaiting for writing back. Unfortunately, the writeback's cgroup has been dead. In this case, we reassociate the inode with another writeback, but we possibly can't because the writeback associated with the dead cgroup is the only valid one. In this case, the new writeback is allocated, initialized and associated with the inode in the non-stopping fashion until all data resident in the inode's page cache are flushed to disk. It causes unnecessary high system load. This fixes the issue by enforce moving the inode to root cgroup when the previous binding cgroup becomes dead. With it, no more unnecessary writebacks are created, populated and the system load decreased by about 6x in the test case we carried out: Without the patch: 30% system load With the patch: 5% system load Signed-off-by: Nluanshi <zhangliguang@linux.alibaba.com> Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com> Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
-
由 Jiufei Xue 提交于
synchronize_rcu() didn't wait for call_rcu() callbacks, so inode wb switch may not go to the workqueue after synchronize_rcu(). Thus previous scheduled switches was not finished even flushing the workqueue, which will cause a NULL pointer dereferenced followed below. VFS: Busy inodes after unmount of vdd. Self-destruct in 5 seconds. Have a nice day... BUG: unable to handle kernel NULL pointer dereference at 0000000000000278 [<ffffffff8126a303>] evict+0xb3/0x180 [<ffffffff8126a760>] iput+0x1b0/0x230 [<ffffffff8127c690>] inode_switch_wbs_work_fn+0x3c0/0x6a0 [<ffffffff810a5b2e>] worker_thread+0x4e/0x490 [<ffffffff810a5ae0>] ? process_one_work+0x410/0x410 [<ffffffff810ac056>] kthread+0xe6/0x100 [<ffffffff8173c199>] ret_from_fork+0x39/0x50 Replace the synchronize_rcu() call with a rcu_barrier() to wait for all pending callbacks to finish. And inc isw_nr_in_flight after call_rcu() in inode_switch_wbs() to make more sense. Suggested-by: NTejun Heo <tj@kernel.org> Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com> Acked-by: NTejun Heo <tj@kernel.org> Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
-
由 Jiufei Xue 提交于
We have gotten a WARNNING when releasing blkcg_css: [332489.681635] WARNING: CPU: 55 PID: 14859 at lib/list_debug.c:56 __list_del_entry+0x81/0xc0 [332489.682191] list_del corruption, ffff883e6b94d450->prev is LIST_POISON2 (dead000000000200) ...... [332489.683895] CPU: 55 PID: 14859 Comm: kworker/55:2 Tainted: G [332489.684477] Hardware name: Inspur SA5248M4/X10DRT-PS, BIOS 4.05A 10/11/2016 [332489.685061] Workqueue: cgroup_destroy css_release_work_fn [332489.685654] ffffc9001d92bd28 ffffffff81380042 ffffc9001d92bd78 0000000000000000 [332489.686269] ffffc9001d92bd68 ffffffff81088f8b 0000003800000000 ffff883e6b94d4a0 [332489.686867] ffff883e6b94d400 ffffffff81ce8fe0 ffff88375b24f400 ffff883e6b94d4a0 [332489.687479] Call Trace: [332489.688078] [<ffffffff81380042>] dump_stack+0x63/0x81 [332489.688681] [<ffffffff81088f8b>] __warn+0xcb/0xf0 [332489.689276] [<ffffffff8108900f>] warn_slowpath_fmt+0x5f/0x80 [332489.689877] [<ffffffff8139e7c1>] __list_del_entry+0x81/0xc0 [332489.690481] [<ffffffff81125552>] css_release_work_fn+0x42/0x140 [332489.691090] [<ffffffff810a2db9>] process_one_work+0x189/0x420 [332489.691693] [<ffffffff810a309e>] worker_thread+0x4e/0x4b0 [332489.692293] [<ffffffff810a3050>] ? process_one_work+0x420/0x420 [332489.692905] [<ffffffff810a9616>] kthread+0xe6/0x100 [332489.693504] [<ffffffff810a9530>] ? kthread_park+0x60/0x60 [332489.694099] [<ffffffff817184e1>] ret_from_fork+0x41/0x50 [332489.694722] ---[ end trace 0cf869c4a5cfba87 ]--- ...... This is caused by calling css_get after the css is killed by another thread described below: Thread 1 Thread 2 cgroup_rmdir -> kill_css -> percpu_ref_kill_and_confirm -> css_killed_ref_fn css_killed_work_fn -> css_put -> css_release wb_get_create -> find_blkcg_css -> css_get -> css_put -> css_release (double free) -> css_release_workfn -> css_free_work_fn -> blkcg_css_free When doublefree happened, it may free the memory still used by other threads and cause a kernel panic. Fix this by using css_tryget_online in find_blkcg_css while will return false if the css is killed. Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com> Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
-
由 Jiufei Xue 提交于
Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com> Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
-
由 Jiufei Xue 提交于
Here we add a global radix tree to link memcg and blkcg that the user attach the tasks to when using cgroup v1, which is used for writeback cgroup. Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com> Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
-
由 Jiufei Xue 提交于
We found that it return success when we set IMMUTABLE_FL flag to a file in docker even though the docker didn't have the capability CAP_LINUX_IMMUTABLE. The commit d1d04ef8 ("ovl: stack file ops") and dab5ca8f ("ovl: add lsattr/chattr support") implemented chattr operations on a regular overlay file. ovl_real_ioctl() overridden the current process's subjective credentials with ofs->creator_cred which have the capability CAP_LINUX_IMMUTABLE so that it will return success in vfs_ioctl()->cap_capable(). Fix this by checking the capability before cred overridden. And here we only care about APPEND_FL and IMMUTABLE_FL, so get these information from inode. [SzM: move check and call to underlying fs inside inode locked region to prevent two such calls from racing with each other] Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com> Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com> Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
-
由 Jiufei Xue 提交于
commit 8c40292be9169a9cbe19aadd1a6fc60cbd1af82f upstream. Syzkaller hit 'WARNING in __alloc_pages_nodemask' bug. WARNING: CPU: 1 PID: 1473 at mm/page_alloc.c:4377 __alloc_pages_nodemask+0x4da/0x2130 Kernel panic - not syncing: panic_on_warn set ... Call Trace: alloc_pages_current+0xb1/0x1e0 kmalloc_order+0x1f/0x60 kmalloc_order_trace+0x1d/0x120 fb_alloc_cmap_gfp+0x85/0x2b0 fb_set_user_cmap+0xff/0x370 do_fb_ioctl+0x949/0xa20 fb_ioctl+0xdd/0x120 do_vfs_ioctl+0x186/0x1070 ksys_ioctl+0x89/0xa0 __x64_sys_ioctl+0x74/0xb0 do_syscall_64+0xc8/0x550 entry_SYSCALL_64_after_hwframe+0x49/0xbe This is a warning about order >= MAX_ORDER and the order is from userspace ioctl. Add flag __NOWARN to silence this warning. Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com> Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
-
由 Shile Zhang 提交于
commit cf84807f6dd0be5214378e66460cfc9187f532f9 upstream To fix following divide-by-zero error found by Syzkaller: divide error: 0000 [#1] SMP PTI CPU: 7 PID: 8447 Comm: test Kdump: loaded Not tainted 4.19.24-8.al7.x86_64 #1 Hardware name: Alibaba Cloud Alibaba Cloud ECS, BIOS rel-1.12.0-0-ga698c8995f-prebuilt.qemu.org 04/01/2014 RIP: 0010:fb_var_to_videomode+0xae/0xc0 Code: 04 44 03 46 78 03 4e 7c 44 03 46 68 03 4e 70 89 ce d1 ee 69 c0 e8 03 00 00 f6 c2 01 0f 45 ce 83 e2 02 8d 34 09 0f 45 ce 31 d2 <41> f7 f0 31 d2 f7 f1 89 47 08 f3 c3 66 0f 1f 44 00 00 0f 1f 44 00 RSP: 0018:ffffb7e189347bf0 EFLAGS: 00010246 RAX: 00000000e1692410 RBX: ffffb7e189347d60 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffb7e189347c10 RBP: ffff99972a091c00 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000100 R13: 0000000000010000 R14: 00007ffd66baf6d0 R15: 0000000000000000 FS: 00007f2054d11740(0000) GS:ffff99972fbc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f205481fd20 CR3: 00000004288a0001 CR4: 00000000001606a0 Call Trace: fb_set_var+0x257/0x390 ? lookup_fast+0xbb/0x2b0 ? fb_open+0xc0/0x140 ? chrdev_open+0xa6/0x1a0 do_fb_ioctl+0x445/0x5a0 do_vfs_ioctl+0x92/0x5f0 ? __alloc_fd+0x3d/0x160 ksys_ioctl+0x60/0x90 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x5b/0x190 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f20548258d7 Code: 44 00 00 48 8b 05 b9 15 2d 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 89 15 2d 00 f7 d8 64 89 01 48 It can be triggered easily with following test code: #include <linux/fb.h> #include <fcntl.h> #include <sys/ioctl.h> int main(void) { struct fb_var_screeninfo var = {.activate = 0x100, .pixclock = 60}; int fd = open("/dev/fb0", O_RDWR); if (fd < 0) return 1; if (ioctl(fd, FBIOPUT_VSCREENINFO, &var)) return 1; return 0; } Signed-off-by: NShile Zhang <shile.zhang@linux.alibaba.com> Cc: Fredrik Noring <noring@nocrew.org> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: NMukesh Ojha <mojha@codeaurora.org> Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
-
由 George Zhang 提交于
LVS fullnat will replace network traffic's source ip with its local ip, and thus the backend servers cannot obtain the real client ip. To solve this, LVS has introduced the tcp option address (TOA) to store the essential ip address information in the last tcp ack packet of the 3-way handshake, and the backend servers need to retrieve it from the packet header. In this patch, we have introduced the sk_toa_data member in the sock structure to hold the TOA information. There used to be an in-tree module for TOA managing, whereas it has now been maintained as an standalone module. In this case, the toa module should register its hook function(s) using the provided interfaces in the hookers module. TOA in sock structure: __be32 sk_toa_data[16]; The hookers module only provides the sk_toa_data placeholder, and the toa module can use this variable through the layout it needs. Hook interfaces: The hookers module replaces the kernel's syn_recv_sock and getname handler with a stub that chains the toa module's hook function(s) to the original handling function. The hookers module allows hook functions to be installed and uninstalled in any order. toa module: The external toa module will be provided in separate RPM package. [xuyu@linux.alibaba.com: amend commit log] Signed-off-by: NGeorge Zhang <georgezhang@linux.alibaba.com> Signed-off-by: NXu Yu <xuyu@linux.alibaba.com> Reviewed-by: NCaspar Zhang <caspar@linux.alibaba.com>
-
由 Changpeng Liu 提交于
commit 1f23816b8eb8fdc39990abe166c10a18c16f6b21 upstream. In commit 88c85538, "virtio-blk: add discard and write zeroes features to specification" (https://github.com/oasis-tcs/virtio-spec), the virtio block specification has been extended to add VIRTIO_BLK_T_DISCARD and VIRTIO_BLK_T_WRITE_ZEROES commands. This patch enables support for discard and write zeroes in the virtio-blk driver when the device advertises the corresponding features, VIRTIO_BLK_F_DISCARD and VIRTIO_BLK_F_WRITE_ZEROES. Signed-off-by: NChangpeng Liu <changpeng.liu@intel.com> Signed-off-by: NDaniel Verkamp <dverkamp@chromium.org> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com> Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com> Reviewed-by: NLiu Bo <bo.liu@linux.alibaba.com> Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
-
由 Jiufei Xue 提交于
Unstable tsc will trigger clocksource watchdog and disable itself, as a result other clocksource will be elected as the current clocksource which will result in performace issue on our servers. RHEL7 also disabled this feature for some issues, see changelog: [x86] disable clocksource watchdog (Prarit Bhargava) [914709] Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com> Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
-
由 Jiufei Xue 提交于
This reverts commit 76d3b851. The returned value for check_tsc_warp() is useless now, remove it. Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com> Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
-
由 Jiufei Xue 提交于
This reverts commit cc4db268. When we do hot-add and enable vCPU, the time inside the VM jumps and then VM stucks. The dmesg shows like this: [ 48.402948] CPU2 has been hot-added [ 48.413774] smpboot: Booting Node 0 Processor 2 APIC 0x2 [ 48.415155] kvm-clock: cpu 2, msr 6b615081, secondary cpu clock [ 48.453690] TSC ADJUST compensate: CPU2 observed 139318776350 warp. Adjust: 139318776350 [ 102.060874] clocksource: timekeeping watchdog on CPU0: Marking clocksource 'tsc' as unstable because the skew is too large: [ 102.060874] clocksource: 'kvm-clock' wd_now: 1cb1cfc4bf8 wd_last: 1be9588f1fe mask: ffffffffffffffff [ 102.060874] clocksource: 'tsc' cs_now: 207d794f7e cs_last: 205a32697a mask: ffffffffffffffff [ 102.060874] tsc: Marking TSC unstable due to clocksource watchdog [ 102.070188] KVM setup async PF for cpu 2 [ 102.071461] kvm-stealtime: cpu 2, msr 13ba95000 [ 102.074530] Will online and init hotplugged CPU: 2 This is because the TSC for the newly added VCPU is initialized to 0 while others are ahead. Guest will do the TSC ADJUST compensate and cause the time jumps. Commit bd8fab39("KVM: x86: fix maintaining of kvm_clock stability on guest CPU hotplug") can fix this problem. However, the host kernel version may be older, so do not ajust TSC if sync test fails, just mark it unstable. Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com> Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
-
由 Joseph Qi 提交于
ECI may have an use case that configuring each device mapper disk throttling policy just under root blkio cgroup, but actually using them in different containers. Since hierarchical throttling is now only supported on cgroup v2 and ECI uses cgroup v1, so we have to enable hierarchical throttling on cgroup v1. This is ported from redhat 7u, and a year ago Jiufei already ported it to alikernel 4.9 as well. So I think this change should be acceptable. Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com> Reviewed-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
-
由 Eryu Guan 提交于
Prior to xdragon platform 20181230 release (e.g. 0930 release), vring_use_dma_api() is required to return 'true' unconditionally. Introduce a new kernel boot parameter called "vring_force_dma_api" to control the behavior, boot xdragon host with "vring_force_dma_api" command line to make ENI hotplug work, so that normal ECS hosts keep the original behavior. Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com> Signed-off-by: NEryu Guan <eguan@linux.alibaba.com>
-
由 Arjan van de Ven 提交于
Cherry-pick from clear-linux patches: https://github.com/clearlinux-pkgs/linux-kvm/0104-give-rdrand-some-credit.patch try to credit rdrand/rdseed with some entropy In VMs but even modern hardware, we're super starved for entropy, and while we can and do wear a tin foil hat, it's very hard to argue that rdrand and rdtsc add zero entropy. Signed-off-by: NArjan van de Ven <arjan@linux.intel.com> Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com> Reviewed-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
-
由 Julio Montes 提交于
Cherry-pick from kata-container patches: https://github.com/kata-containers/packaging/tree/master/kernel/patches/0001-NO-UPSTREAM-9P-always-use-cached-inode-to-fill-in-v9.patch So that if in cache=none mode, we don't have to lookup server that might not support open-unlink-fstat operation. fixes https://github.com/01org/cc-oci-runtime/issues/47 fixes https://github.com/01org/cc-oci-runtime/issues/1062Signed-off-by: NJulio Montes <julio.montes@intel.com> Signed-off-by: NPeng Tao <bergwolf@gmail.com> Signed-off-by: NEryu Guan <eguan@linux.alibaba.com> Reviewed-by: NJiufei Xue <jiufei.xue@linux.alibaba.com> Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
-
由 Arjan van de Ven 提交于
Cherry-pick from kata-container patches: https://github.com/kata-containers/packaging/tree/master/kernel/patches/0002-Compile-in-evged-always.patch We need evged for NEMU (and in general for hw reduced) The config option cannot be set normally since it breaks all regular systems, and hardware reduced is really a runtime choice. Signed-off-by: NArjan van de Ven <arjan@linux.intel.com> Signed-off-by: NEryu Guan <eguan@linux.alibaba.com> Reviewed-by: NJiufei Xue <jiufei.xue@linux.alibaba.com> Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
-
由 Eric Whitney 提交于
commit f456767d3391e9f7d9d25a2e7241d75676dc19da upstream. Add new code to count canceled pending cluster reservations on bigalloc file systems and to reduce the cluster reservation count on all file systems using delayed allocation. This replaces old code in ext4_da_page_release_reservations that was incorrect. Signed-off-by: NEric Whitney <enwlinux@gmail.com> Signed-off-by: NTheodore Ts'o <tytso@mit.edu> Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com> Reviewed-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
-
由 Eric Whitney 提交于
commit 9fe671496b6c286f9033aedfc1718d67721da0ae upstream. Modify ext4_ext_remove_space() and the code it calls to correct the reserved cluster count for pending reservations (delayed allocated clusters shared with allocated blocks) when a block range is removed from the extent tree. Pending reservations may be found for the clusters at the ends of written or unwritten extents when a block range is removed. If a physical cluster at the end of an extent is freed, it's necessary to increment the reserved cluster count to maintain correct accounting if the corresponding logical cluster is shared with at least one delayed and unwritten extent as found in the extents status tree. Add a new function, ext4_rereserve_cluster(), to reapply a reservation on a delayed allocated cluster sharing blocks with a freed allocated cluster. To avoid ENOSPC on reservation, a flag is applied to ext4_free_blocks() to briefly defer updating the freeclusters counter when an allocated cluster is freed. This prevents another thread from allocating the freed block before the reservation can be reapplied. Redefine the partial cluster object as a struct to carry more state information and to clarify the code using it. Adjust the conditional code structure in ext4_ext_remove_space to reduce the indentation level in the main body of the code to improve readability. Signed-off-by: NEric Whitney <enwlinux@gmail.com> Signed-off-by: NTheodore Ts'o <tytso@mit.edu> Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com> Reviewed-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
-
由 Eric Whitney 提交于
commit b6bf9171ef5c37b66d446378ba63af5339a56a97 upstream. Ext4 does not always reduce the reserved cluster count by the number of clusters allocated when mapping a delayed extent. It sometimes adds back one or more clusters after allocation if delalloc blocks adjacent to the range allocated by ext4_ext_map_blocks() share the clusters newly allocated for that range. However, this overcounts the number of clusters needed to satisfy future mapping requests (holding one or more reservations for clusters that have already been allocated) and premature ENOSPC and quota failures, etc., result. Ext4 also does not reduce the reserved cluster count when allocating clusters for non-delayed allocated writes that have previously been reserved for delayed writes. This also results in overcounts. To make it possible to handle reserved cluster accounting for fallocated regions in the same manner as used for other non-delayed writes, do the reserved cluster accounting for them at the time of allocation. In the current code, this is only done later when a delayed extent sharing the fallocated region is finally mapped. Address comment correcting handling of unsigned long long constant from Jan Kara's review of RFC version of this patch. Signed-off-by: NEric Whitney <enwlinux@gmail.com> Signed-off-by: NTheodore Ts'o <tytso@mit.edu> Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com> Reviewed-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
-
由 Eric Whitney 提交于
commit 0b02f4c0d6d9e2c611dfbdd4317193e9dca740e6 upstream. The code in ext4_da_map_blocks sometimes reserves space for more delayed allocated clusters than it should, resulting in premature ENOSPC, exceeded quota, and inaccurate free space reporting. Fix this by checking for written and unwritten blocks shared in the same cluster with the newly delayed allocated block. A cluster reservation should not be made for a cluster for which physical space has already been allocated. Signed-off-by: NEric Whitney <enwlinux@gmail.com> Signed-off-by: NTheodore Ts'o <tytso@mit.edu> Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com> Reviewed-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
-
由 Eric Whitney 提交于
commit 1dc0aa46e74a3366e12f426b7caaca477853e9c3 upstream. Add new pending reservation mechanism to help manage reserved cluster accounting. Its primary function is to avoid the need to read extents from the disk when invalidating pages as a result of a truncate, punch hole, or collapse range operation. Signed-off-by: NEric Whitney <enwlinux@gmail.com> Signed-off-by: NTheodore Ts'o <tytso@mit.edu> Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com> Reviewed-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
-
由 Eric Whitney 提交于
commit ad431025aecda85d3ebef5e4a3aca5c1c681d0c7 upstream. Ext4 contains a few functions that are used to search for delayed extents or blocks in the extents status tree. Rather than duplicate code to add new functions to search for extents with different status values, such as written or a combination of delayed and unwritten, generalize the existing code to search for caller-specified extents status values. Also, move this code into extents_status.c where it is better associated with the data structures it operates upon, and where it can be more readily used to implement new extents status tree functions that might want a broader scope for i_es_lock. Three missing static specifiers in RFC version of patch reported and fixed by Fengguang Wu <fengguang.wu@intel.com>. Signed-off-by: NEric Whitney <enwlinux@gmail.com> Signed-off-by: NTheodore Ts'o <tytso@mit.edu> Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com> Reviewed-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
-
- 15 5月, 2019 14 次提交
-
-
由 Greg Kroah-Hartman 提交于
-
由 Josh Poimboeuf 提交于
commit 95310e348a321b45fb746c176961d4da72344282 upstream Fix a minor typo in the MDS documentation: "eanbled" -> "enabled". Reported-by: NJeff Bastian <jbastian@redhat.com> Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Tyler Hicks 提交于
commit ea01668f9f43021b28b3f4d5ffad50106a1e1301 upstream Adjust the last two rows in the table that display possible values when MDS mitigation is enabled. They both were slightly innacurate. In addition, convert the table of possible values and their descriptions to a list-table. The simple table format uses the top border of equals signs to determine cell width which resulted in the first column being far too wide in comparison to the second column that contained the majority of the text. Signed-off-by: NTyler Hicks <tyhicks@canonical.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 speck for Pawan Gupta 提交于
commit e672f8bf71c66253197e503f75c771dd28ada4a0 upstream Updated the documentation for a new CVE-2019-11091 Microarchitectural Data Sampling Uncacheable Memory (MDSUM) which is a variant of Microarchitectural Data Sampling (MDS). MDS is a family of side channel attacks on internal buffers in Intel CPUs. MDSUM is a special case of MSBDS, MFBDS and MLPDS. An uncacheable load from memory that takes a fault or assist can leave data in a microarchitectural structure that may later be observed using one of the same methods used by MSBDS, MFBDS or MLPDS. There are no new code changes expected for MDSUM. The existing mitigation for MDS applies to MDSUM as well. Signed-off-by: NPawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Reviewed-by: NTyler Hicks <tyhicks@canonical.com> Reviewed-by: NJon Masters <jcm@redhat.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Josh Poimboeuf 提交于
commit 5c14068f87d04adc73ba3f41c2a303d3c3d1fa12 upstream Add MDS to the new 'mitigations=' cmdline option. Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Josh Poimboeuf 提交于
commit 0336e04a6520bdaefdb0769d2a70084fa52e81ed upstream Configure s390 runtime CPU speculation bug mitigations in accordance with the 'mitigations=' cmdline option. This affects Spectre v1 and Spectre v2. The default behavior is unchanged. Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Tested-by: Jiri Kosina <jkosina@suse.cz> (on x86) Reviewed-by: NJiri Kosina <jkosina@suse.cz> Cc: Borislav Petkov <bp@alien8.de> Cc: "H . Peter Anvin" <hpa@zytor.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Jiri Kosina <jikos@kernel.org> Cc: Waiman Long <longman@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Jon Masters <jcm@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: linuxppc-dev@lists.ozlabs.org Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux-s390@vger.kernel.org Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-arch@vger.kernel.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Tyler Hicks <tyhicks@canonical.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Steven Price <steven.price@arm.com> Cc: Phil Auld <pauld@redhat.com> Link: https://lkml.kernel.org/r/e4a161805458a5ec88812aac0307ae3908a030fc.1555085500.git.jpoimboe@redhat.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Josh Poimboeuf 提交于
commit 782e69efb3dfed6e8360bc612e8c7827a901a8f9 upstream Configure powerpc CPU runtime speculation bug mitigations in accordance with the 'mitigations=' cmdline option. This affects Meltdown, Spectre v1, Spectre v2, and Speculative Store Bypass. The default behavior is unchanged. Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Tested-by: Jiri Kosina <jkosina@suse.cz> (on x86) Reviewed-by: NJiri Kosina <jkosina@suse.cz> Cc: Borislav Petkov <bp@alien8.de> Cc: "H . Peter Anvin" <hpa@zytor.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Jiri Kosina <jikos@kernel.org> Cc: Waiman Long <longman@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Jon Masters <jcm@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: linuxppc-dev@lists.ozlabs.org Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux-s390@vger.kernel.org Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-arch@vger.kernel.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Tyler Hicks <tyhicks@canonical.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Steven Price <steven.price@arm.com> Cc: Phil Auld <pauld@redhat.com> Link: https://lkml.kernel.org/r/245a606e1a42a558a310220312d9b6adb9159df6.1555085500.git.jpoimboe@redhat.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Josh Poimboeuf 提交于
commit d68be4c4d31295ff6ae34a8ddfaa4c1a8ff42812 upstream Configure x86 runtime CPU speculation bug mitigations in accordance with the 'mitigations=' cmdline option. This affects Meltdown, Spectre v2, Speculative Store Bypass, and L1TF. The default behavior is unchanged. Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Tested-by: Jiri Kosina <jkosina@suse.cz> (on x86) Reviewed-by: NJiri Kosina <jkosina@suse.cz> Cc: Borislav Petkov <bp@alien8.de> Cc: "H . Peter Anvin" <hpa@zytor.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Jiri Kosina <jikos@kernel.org> Cc: Waiman Long <longman@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Jon Masters <jcm@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: linuxppc-dev@lists.ozlabs.org Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux-s390@vger.kernel.org Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-arch@vger.kernel.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Tyler Hicks <tyhicks@canonical.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Steven Price <steven.price@arm.com> Cc: Phil Auld <pauld@redhat.com> Link: https://lkml.kernel.org/r/6616d0ae169308516cfdf5216bedd169f8a8291b.1555085500.git.jpoimboe@redhat.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Josh Poimboeuf 提交于
commit 98af8452945c55652de68536afdde3b520fec429 upstream Keeping track of the number of mitigations for all the CPU speculation bugs has become overwhelming for many users. It's getting more and more complicated to decide which mitigations are needed for a given architecture. Complicating matters is the fact that each arch tends to have its own custom way to mitigate the same vulnerability. Most users fall into a few basic categories: a) they want all mitigations off; b) they want all reasonable mitigations on, with SMT enabled even if it's vulnerable; or c) they want all reasonable mitigations on, with SMT disabled if vulnerable. Define a set of curated, arch-independent options, each of which is an aggregation of existing options: - mitigations=off: Disable all mitigations. - mitigations=auto: [default] Enable all the default mitigations, but leave SMT enabled, even if it's vulnerable. - mitigations=auto,nosmt: Enable all the default mitigations, disabling SMT if needed by a mitigation. Currently, these options are placeholders which don't actually do anything. They will be fleshed out in upcoming patches. Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Tested-by: Jiri Kosina <jkosina@suse.cz> (on x86) Reviewed-by: NJiri Kosina <jkosina@suse.cz> Cc: Borislav Petkov <bp@alien8.de> Cc: "H . Peter Anvin" <hpa@zytor.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Jiri Kosina <jikos@kernel.org> Cc: Waiman Long <longman@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Jon Masters <jcm@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: linuxppc-dev@lists.ozlabs.org Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux-s390@vger.kernel.org Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-arch@vger.kernel.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Tyler Hicks <tyhicks@canonical.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Steven Price <steven.price@arm.com> Cc: Phil Auld <pauld@redhat.com> Link: https://lkml.kernel.org/r/b07a8ef9b7c5055c3a4637c87d07c296d5016fe0.1555085500.git.jpoimboe@redhat.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Konrad Rzeszutek Wilk 提交于
commit e2c3c94788b08891dcf3dbe608f9880523ecd71b upstream This code is only for CPUs which are affected by MSBDS, but are *not* affected by the other two MDS issues. For such CPUs, enabling the mds_idle_clear mitigation is enough to mitigate SMT. However if user boots with 'mds=off' and still has SMT enabled, we should not report that SMT is mitigated: $cat /sys//devices/system/cpu/vulnerabilities/mds Vulnerable; SMT mitigated But rather: Vulnerable; SMT vulnerable Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Reviewed-by: NTyler Hicks <tyhicks@canonical.com> Reviewed-by: NJosh Poimboeuf <jpoimboe@redhat.com> Link: https://lkml.kernel.org/r/20190412215118.294906495@localhost.localdomainSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Boris Ostrovsky 提交于
commit cae5ec342645746d617dd420d206e1588d47768a upstream s/L1TF/MDS/ Signed-off-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Reviewed-by: NTyler Hicks <tyhicks@canonical.com> Reviewed-by: NJosh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Josh Poimboeuf 提交于
commit 39226ef02bfb43248b7db12a4fdccb39d95318e3 upstream MDS is vulnerable with SMT. Make that clear with a one-time printk whenever SMT first gets enabled. Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Reviewed-by: NTyler Hicks <tyhicks@canonical.com> Acked-by: NJiri Kosina <jkosina@suse.cz> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Josh Poimboeuf 提交于
commit 7c3658b20194a5b3209a143f63bc9c643c6a3ae2 upstream arch_smt_update() now has a dependency on both Spectre v2 and MDS mitigations. Move its initial call to after all the mitigation decisions have been made. Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Reviewed-by: NTyler Hicks <tyhicks@canonical.com> Acked-by: NJiri Kosina <jkosina@suse.cz> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Josh Poimboeuf 提交于
commit d71eb0ce109a124b0fa714832823b9452f2762cf upstream Add the mds=full,nosmt cmdline option. This is like mds=full, but with SMT disabled if the CPU is vulnerable. Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Reviewed-by: NTyler Hicks <tyhicks@canonical.com> Acked-by: NJiri Kosina <jkosina@suse.cz> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-