Pull PCI updates from Bjorn Helgaas:
 "MSI:
      PCI: Set ->mask_pos correctly
  Hotplug:
      PCI: Delay final fixups until resources are assigned
  Moorestown:
      x86/pci/mrst: Use configuration mechanism 1 for 00:00.0, 00:02.0, 00:03.0"

* tag 'pci-v3.10-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI: Delay final fixups until resources are assigned
  x86/pci/mrst: Use configuration mechanism 1 for 00:00.0, 00:02.0, 00:03.0
  PCI: Set ->mask_pos correctly

Pull MTD update from David Woodhouse:

 - Lots of cleanups from Artem, including deletion of some obsolete
   drivers

 - Support partitions larger than 4GiB in device tree

 - Support for new SPI chips

* tag 'for-linus-20130509' of git://git.infradead.org/linux-mtd: (83 commits)
  mtd: omap2: Use module_platform_driver()
  mtd: bf5xx_nand: Use module_platform_driver()
  mtd: denali_dt: Remove redundant use of of_match_ptr
  mtd: denali_dt: Change return value to fix smatch warning
  mtd: denali_dt: Use module_platform_driver()
  mtd: denali_dt: Fix incorrect error check
  mtd: nand: subpage write support for hardware based ECC schemes
  mtd: omap2: use msecs_to_jiffies()
  mtd: nand_ids: use size macros
  mtd: nand_ids: improve LEGACY_ID_NAND macro a bit
  mtd: add 4 Toshiba nand chips for the full-id case
  mtd: add the support to parse out the full-id nand type
  mtd: add new fields to nand_flash_dev{}
  mtd: sh_flctl: Use of_match_ptr() macro
  mtd: gpio: Use of_match_ptr() macro
  mtd: gpio: Use devm_kzalloc()
  mtd: davinci_nand: Use of_match_ptr()
  mtd: dataflash: Use of_match_ptr() macro
  mtd: remove h720x flash support
  mtd: onenand: remove OneNAND simulator
  ...

Pull firewure updates from Stefan Richter:
  - fix controller removal when controller is in suspended state
  - fix video reception on VIA VT6306 with gstreamer, MythTV, and maybe dv4l
  - fix a startup issue with Agere/LSI FW643-e2
  - error logging improvements and other small updates

* tag 'firewire-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
  firewire: ohci: dump_stack() for PHY regs read/write failures
  firewire: ohci: Improve bus reset error messages
  firewire: ohci: Alias dev_* log functions
  firewire: ohci: Fix 'failed to read phy reg' on FW643 rev8
  firewire: ohci: fix VIA VT6306 video reception
  firewire: ohci: Check LPS before register access on pci removal
  firewire: ohci: Fix double free_irq()
  firewire: remove unnecessary alloc/OOM messages
  firewire: sbp2: replace BUG_ON by WARN_ON
  firewire: core: remove an always false test
  firewire: Remove two unneeded checks for macros

Pull two small EDAC fixes from Borislav Petkov.

* tag 'edac_fixes_for_3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  EDAC: Don't give write permission to read-only files
  EDAC, mc_sysfs.c: Fix string array pointer types

Pull watchdog update from Wim Van Sebroeck:
 "Fix a kdump issue in hpwdt and a possible NULL dereference"

* git://www.linux-watchdog.org/linux-watchdog:
  watchdog: Fix race condition in registration code
  watchdog: Convert to devm_ioremap_resource()

Pull removal of GENERIC_GPIO from Grant Likely:
 "GENERIC_GPIO now synonymous with GPIOLIB.  There are no longer any
  valid cases for enableing GENERIC_GPIO without GPIOLIB, even though it
  is possible to do so which has been causing confusion and breakage.
  This branch does the work to completely eliminate GENERIC_GPIO."

* tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux:
  gpio: update gpio Chinese documentation
  Remove GENERIC_GPIO config option
  Convert selectors of GENERIC_GPIO to GPIOLIB
  blackfin: force use of gpiolib
  m68k: coldfire: use gpiolib
  mips: pnx833x: remove requirement for GENERIC_GPIO
  openrisc: default GENERIC_GPIO to false
  avr32: default GENERIC_GPIO to false
  xtensa: remove explicit selection of GENERIC_GPIO
  sh: replace CONFIG_GENERIC_GPIO by CONFIG_GPIOLIB
  powerpc: remove redundant GENERIC_GPIO selection
  unicore32: default GENERIC_GPIO to false
  unicore32: remove unneeded select GENERIC_GPIO
  arm: plat-orion: use GPIO driver on CONFIG_GPIOLIB
  arm: remove redundant GENERIC_GPIO selection
  mips: alchemy: require gpiolib
  mips: txx9: change GENERIC_GPIO to GPIOLIB
  mips: loongson: use GPIO driver on CONFIG_GPIOLIB
  mips: remove redundant GENERIC_GPIO select

Pull slave-dmaengine updates from Vinod Koul:
 "This time we have dmatest improvements from Andy along with dw_dmac
  fixes.  He has also done support for acpi for dmanegine.

  Also we have bunch of fixes going in DT support for dmanegine for
  various folks.  Then Haswell and other ioat changes from Dave and
  SUDMAC support from Shimoda."

* 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (53 commits)
  dma: tegra: implement suspend/resume callbacks
  dma:of: Use a mutex to protect the of_dma_list
  dma: of: Fix of_node reference leak
  dmaengine: sirf: move driver init from module_init to subsys_initcall
  sudmac: add support for SUDMAC
  dma: sh: add Kconfig
  at_hdmac: move to generic DMA binding
  ioatdma: ioat3_alloc_sed can be static
  ioatdma: Adding write back descriptor error status support for ioatdma 3.3
  ioatdma: S1200 platforms ioatdma channel 2 and 3 falsely advertise RAID cap
  ioatdma: Adding support for 16 src PQ ops and super extended descriptors
  ioatdma: Removing hw bug workaround for CB3.x .2 and earlier
  dw_dmac: add ACPI support
  dmaengine: call acpi_dma_request_slave_channel as well
  dma: acpi-dma: introduce ACPI DMA helpers
  dma: of: Remove unnecessary list_empty check
  DMA: OF: Check properties value before running be32_to_cpup() on it
  DMA: of: Constant names
  ioatdma: skip silicon bug workaround for pq_align for cb3.3
  ioatdma: Removing PQ val disable for cb3.3
  ...

Pull thermal management update from Zhang Rui:
 "The most important one is to build thermal core and governor and cpu
  cooling code into one module.  This fixes a regression that thermal
  core does not work if it is built as module, since 3.7.  I'll backport
  them to stable kernel once those changes are in upstream.

  The largest batch is the thermal kernel-doc & coding style
  updates/cleanups from Eduardo.

  Highlights:

   - build all thermal framework code into one module to fix a
     regression that thermal does not work if it is built as module.

   - Marvell Armada 370/XP thermal sensor driver

   - thermal core/cpu cooling kernel-doc & coding style updates and
     cleanups.

   - Add Eduardo Valentin as thermal sub-maintainer, both in mailing
     list and patchwork.  He will help me on arm thermal drivers."

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (68 commits)
  thermal: db8500_cpufreq_cooling: remove usage of IS_ERR_OR_NULL()
  thermal: thermal_core: remove usage of IS_ERR_OR_NULL
  thermal: cpu_cooling: improve line breaking
  thermal: cpu_cooling: alignment improvements
  thermal: cpu_cooling: remove checkpatch.pl warning
  thermal: cpu_cooling: remove trailing blank line
  thermal: cpu_cooling: align on open parenthesis
  thermal: cpu_cooling: standardize comment style
  thermal: cpu_cooling: standardize end of function
  thermal: cpu_cooling: remove trailing white spaces
  Thermal: update documentation for thermal_zone_device_register
  thermal: update kernel-doc for thermal_zone_device_register
  thermal: update kernel-doc for create_trip_attrs
  thermal: update kernel-doc for thermal_cooling_device_register
  thermal: update kernel-doc for thermal_zone_unbind_cooling_device
  thermal: update kernel-doc for thermal_zone_bind_cooling_device
  thermal: use EXPORT_SYMBOL_GPL
  thermal: rename notify_thermal_framework to thermal_notify_framework
  thermal: update driver license
  thermal: use strlcpy instead of strcpy
  ...

I get the following warning on boot:

------------[ cut here ]------------
WARNING: at drivers/base/core.c:575 device_create_file+0x9a/0xa0()
Hardware name:  -[8737R2A]-
Write permission without 'store'
...
</snip>

Drilling down, this is related to dynamic channel ce_count attribute
files sporting a S_IWUSR mode without a ->store() function. Looking
around, it appears that they aren't supposed to have a ->store()
function. So remove the bogus write permission to get rid of the
warning.
Signed-off-by: NSrivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
Cc: <stable@vger.kernel.org> # 3.[89]
[ shorten commit message ]
Signed-off-by: NBorislav Petkov <bp@suse.de>

A race condition exists when registering the first watchdog device.
Sequence of events:

- watchdog_register_device calls watchdog_dev_register
- watchdog_dev_register creates the watchdog misc device by calling
  misc_register.
  At that time, the matching character device (/dev/watchdog0) does not yet
  exist, and old_wdd is not set either.
- Userspace gets an event and opens /dev/watchdog
- watchdog_open is called and sets wdd = old_wdd, which is still NULL,
  and tries to dereference it. This causes the kernel to panic.

Seen with systemd trying to open /dev/watchdog immediately after
it was created.
Reported-by: NArkadiusz Miskiewicz <arekm@maven.pl>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Tested-by: NArkadiusz Miskiewicz <arekm@maven.pl>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Use the newly introduced devm_ioremap_resource() instead of
devm_request_and_ioremap() which provides more consistent error handling.

devm_ioremap_resource() provides its own error messages; so all explicit
error messages can be removed from the failure code paths.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Reviewed-by: NThierry Reding <thierry.reding@avionic-design.de>
Cc: Gabor Juhos <juhosg@openwrt.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Pull InfiniBand/RDMA changes from Roland Dreier:
 - XRC transport fixes
 - Fix DHCP on IPoIB
 - mlx4 preparations for flow steering
 - iSER fixes
 - miscellaneous other fixes

* tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (23 commits)
  IB/iser: Add support for iser CM REQ additional info
  IB/iser: Return error to upper layers on EAGAIN registration failures
  IB/iser: Move informational messages from error to info level
  IB/iser: Add module version
  mlx4_core: Expose a few helpers to fill DMFS HW strucutures
  mlx4_core: Directly expose fields of DMFS HW rule control segment
  mlx4_core: Change a few DMFS fields names to match firmare spec
  mlx4: Match DMFS promiscuous field names to firmware spec
  mlx4_core: Move DMFS HW structs to common header file
  IB/mlx4: Set link type for RAW PACKET QPs in the QP context
  IB/mlx4: Disable VLAN stripping for RAW PACKET QPs
  mlx4_core: Reduce warning message for SRQ_LIMIT event to debug level
  RDMA/iwcm: Don't touch cmid after dropping reference
  IB/qib: Correct qib_verbs_register_sysfs() error handling
  IB/ipath: Correct ipath_verbs_register_sysfs() error handling
  RDMA/cxgb4: Fix SQ allocation when on-chip SQ is disabled
  SRPT: Fix odd use of WARN_ON()
  IPoIB: Fix ipoib_hard_header() return value
  RDMA: Rename random32() to prandom_u32()
  RDMA/cxgb3: Fix uninitialized variable
  ...

Pull arm64 update from Catalin Marinas:

 - Since drivers/irqchip/irq-gic.c no longer has dependencies on arm32
   specifics (the 'gic' branch merged), it can be enabled on arm64.

 - Enable arm64 support for poweroff/restart (for code under
   drivers/power/reset/).

 - Fixes (dts file, exception handling, bitops)

* tag 'arm64-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64:
  arm64: Treat the bitops index argument as an 'int'
  arm64: Ignore the 'write' ESR flag on cache maintenance faults
  arm64: dts: fix #address-cells for foundation-v8
  arm64: vexpress: Add support for poweroff/restart
  arm64: Enable support for the ARM GIC interrupt controller

Pull f2fs updates from Jaegeuk Kim:
 "This patch-set includes the following major enhancement patches.
   - introduce a new gloabl lock scheme
   - add tracepoints on several major functions
   - fix the overall cleaning process focused on victim selection
   - apply the block plugging to merge IOs as much as possible
   - enhance management of free nids and its list
   - enhance the readahead mode for node pages
   - address several cretical deadlock conditions
   - reduce lock_page calls

  The other minor bug fixes and enhancements are as follows.
   - calculation mistakes: overflow
   - bio types: READ, READA, and READ_SYNC
   - fix the recovery flow, data races, and null pointer errors"

* tag 'f2fs-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (68 commits)
  f2fs: cover free_nid management with spin_lock
  f2fs: optimize scan_nat_page()
  f2fs: code cleanup for scan_nat_page() and build_free_nids()
  f2fs: bugfix for alloc_nid_failed()
  f2fs: recover when journal contains deleted files
  f2fs: continue to mount after failing recovery
  f2fs: avoid deadlock during evict after f2fs_gc
  f2fs: modify the number of issued pages to merge IOs
  f2fs: remove useless #include <linux/proc_fs.h> as we're now using sysfs as debug entry.
  f2fs: fix inconsistent using of NM_WOUT_THRESHOLD
  f2fs: check truncation of mapping after lock_page
  f2fs: enhance alloc_nid and build_free_nids flows
  f2fs: add a tracepoint on f2fs_new_inode
  f2fs: check nid == 0 in add_free_nid
  f2fs: add REQ_META about metadata requests for submit
  f2fs: give a chance to merge IOs by IO scheduler
  f2fs: avoid frequent background GC
  f2fs: add tracepoints to debug checkpoint request
  f2fs: add tracepoints for write page operations
  f2fs: add tracepoints to debug the block allocation
  ...

Pull Hexagon fixes from Richard Kuo:
 "A bug fix and a Kconfig cleanup"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rkuo/linux-hexagon-kernel:
  HEXAGON: Remove non existent reference to GENERIC_KERNEL_EXECVE & GENERIC_KERNEL_THREAD
  Hexagon: fix register used to call do_work_pending

Commit 8a965b3b ("mm, slab_common: Fix bootstrap creation of kmalloc
caches") introduced a regression that caused us to crash early during
boot.  The commit was introducing ordering of slab creation, making sure
two odd-sized slabs were created after specific powers of two sizes.

But, if any of the power of two slabs were created earlier during boot,
slabs at index 1 or 2 might not get created at all.  This patch makes
sure none of the slabs get skipped.

Tony Lindgren bisected this down to the offending commit, which really
helped because bisect kept bringing me to almost but not quite this one.
Signed-off-by: NChris Mason <chris.mason@fusionio.com>
Acked-by: NChristoph Lameter <cl@linux.com>
Acked-by: NTony Lindgren <tony@atomide.com>
Acked-by: NSoren Brinkmann <soren.brinkmann@xilinx.com>
Tested-by: NTetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Tested-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull block driver updates from Jens Axboe:
 "It might look big in volume, but when categorized, not a lot of
  drivers are touched.  The pull request contains:

   - mtip32xx fixes from Micron.

   - A slew of drbd updates, this time in a nicer series.

   - bcache, a flash/ssd caching framework from Kent.

   - Fixes for cciss"

* 'for-3.10/drivers' of git://git.kernel.dk/linux-block: (66 commits)
  bcache: Use bd_link_disk_holder()
  bcache: Allocator cleanup/fixes
  cciss: bug fix to prevent cciss from loading in kdump crash kernel
  cciss: add cciss_allow_hpsa module parameter
  drivers/block/mg_disk.c: add CONFIG_PM_SLEEP to suspend/resume functions
  mtip32xx: Workaround for unaligned writes
  bcache: Make sure blocksize isn't smaller than device blocksize
  bcache: Fix merge_bvec_fn usage for when it modifies the bvm
  bcache: Correctly check against BIO_MAX_PAGES
  bcache: Hack around stuff that clones up to bi_max_vecs
  bcache: Set ra_pages based on backing device's ra_pages
  bcache: Take data offset from the bdev superblock.
  mtip32xx: mtip32xx: Disable TRIM support
  mtip32xx: fix a smatch warning
  bcache: Disable broken btree fuzz tester
  bcache: Fix a format string overflow
  bcache: Fix a minor memory leak on device teardown
  bcache: Documentation updates
  bcache: Use WARN_ONCE() instead of __WARN()
  bcache: Add missing #include <linux/prefetch.h>
  ...

Pull block core updates from Jens Axboe:

 - Major bit is Kents prep work for immutable bio vecs.

 - Stable candidate fix for a scheduling-while-atomic in the queue
   bypass operation.

 - Fix for the hang on exceeded rq->datalen 32-bit unsigned when merging
   discard bios.

 - Tejuns changes to convert the writeback thread pool to the generic
   workqueue mechanism.

 - Runtime PM framework, SCSI patches exists on top of these in James'
   tree.

 - A few random fixes.

* 'for-3.10/core' of git://git.kernel.dk/linux-block: (40 commits)
  relay: move remove_buf_file inside relay_close_buf
  partitions/efi.c: replace useless kzalloc's by kmalloc's
  fs/block_dev.c: fix iov_shorten() criteria in blkdev_aio_read()
  block: fix max discard sectors limit
  blkcg: fix "scheduling while atomic" in blk_queue_bypass_start
  Documentation: cfq-iosched: update documentation help for cfq tunables
  writeback: expose the bdi_wq workqueue
  writeback: replace custom worker pool implementation with unbound workqueue
  writeback: remove unused bdi_pending_list
  aoe: Fix unitialized var usage
  bio-integrity: Add explicit field for owner of bip_buf
  block: Add an explicit bio flag for bios that own their bvec
  block: Add bio_alloc_pages()
  block: Convert some code to bio_for_each_segment_all()
  block: Add bio_for_each_segment_all()
  bounce: Refactor __blk_queue_bounce to not use bi_io_vec
  raid1: use bio_copy_data()
  pktcdvd: Use bio_reset() in disabled code to kill bi_idx usage
  pktcdvd: use bio_copy_data()
  block: Add bio_copy_data()
  ...

After build_free_nids() searches free nid candidates from nat pages and
current journal blocks, it checks all the candidates if they are allocated
so that the nat cache has its nid with an allocated block address.

In this procedure, previously we used
    list_for_each_entry_safe(fnid, next_fnid, &nm_i->free_nid_list, list).
But, this is not covered by free_nid_list_lock, resulting in null pointer bug.

This patch moves this checking routine inside add_free_nid() in order not to use
the spin_lock.
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

When nm_i->fcnt > 2 * MAX_FREE_NIDS, stop scanning other NAT entries.
Signed-off-by: NHaicheng Li <haicheng.li@linux.intel.com>
[Jaegeuk Kim: fix handling the return value of add_free_nid()]
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

This patch does two cleanups:
1. remove unused variable "fcnt" in build_free_nids().
2. make scan_nat_page() as void type and remove useless variable "fcnt".
Signed-off-by: NHaicheng Li <haicheng.li@linux.intel.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

Directly drop the free_nid cache when nm_i->fcnt > 2 * MAX_FREE_NIDS

Since there is NOT nmi->free_nid_list_lock spinlock protection between
a sequential calling of alloc_nid() and alloc_nid_failed(), some other
threads may already add new free_nid to the free_nid_list during this
period.

We need to make sure nmi->fcnt is never > 2 * MAX_FREE_NIDS.
Signed-off-by: NHaicheng Li <haicheng.li@linux.intel.com>
[Jaegeuk Kim: fit the coding style]
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

When recovering a journal file with fsync data for files that have
been deleted, don't bail out on recovery.
Signed-off-by: NChris Fries <C.Fries@motorola.com>
Reviewed-by: NRussell Knize <rknize2@motorola.com>
Reviewed-by: NJason Hrycay <jason.hrycay@motorola.com>
[Jaegeuk Kim: fit the coding style]
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

When unable to roll forward the journal, we shouldn't bail out and
not mount, we should continue to attempt the mount.  Bad recovery data
is likely unrecoverable at this point, and requiring the user to try
to mount again doesn't solve any issues.
Signed-off-by: NChris Fries <C.Fries@motorola.com>
Reviewed-by: NRussell Knize <rknize2@motorola.com>
Reviewed-by: NJason Hrycay <jason.hrycay@motorola.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

o Deadlock case #1

Thread 1:
- writeback_sb_inodes
 - do_writepages
  - f2fs_write_data_pages
   - write_cache_pages
    - f2fs_write_data_page
     - f2fs_balance_fs
      - wait mutex_lock(gc_mutex)

Thread 2:
- f2fs_balance_fs
 - mutex_lock(gc_mutex)
 - f2fs_gc
  - f2fs_iget
   - wait iget_locked(inode->i_lock)

Thread 3:
- do_unlinkat
 - iput
  - lock(inode->i_lock)
   - evict
    - inode_wait_for_writeback

o Deadlock case #2

Thread 1:
- __writeback_single_inode
 : set I_SYNC
  - do_writepages
   - f2fs_write_data_page
    - f2fs_balance_fs
     - f2fs_gc
      - iput
       - evict
        - inode_wait_for_writeback(I_SYNC)

In order to avoid this, even though iput is called with the zero-reference
count, we need to stop the eviction procedure if the inode is on writeback.
So this patch links f2fs_drop_inode which checks the I_SYNC flag.
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

The bitops prototype use an 'int' as the bit index type but the asm
implementation assume it to be a 'long'. Since the compiler does not
guarantee zeroing the upper 32-bits in a register when used as 'int',
change the bitops implementation accordingly.
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

ESR.WnR bit is always set on data cache maintenance faults even though
the page is not required to have write permission. If a translation
fault (page not yet mapped) happens for read-only user address range,
Linux incorrectly assumes a permission fault. This patch adds the check
of the ESR.CM bit during the page fault handling to ignore the 'write'
flag.
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Reported-by: NTim Northover <Tim.Northover@arm.com>
Cc: stable@vger.kernel.org

Commit 90556ca1 ("arm64: vexpress: Add dts files for the ARMv8 RTSM
models") added foundation-v8.dts, but erroneously set
/cpus/#address-cells = <1> while providing two cells in each cpus/cpu@N
node's reg property.

As of commit ea393a2e ("arm64: smp: honour #address-size when parsing
CPU reg property") we read in as many address cells as specified rather
than always reading two. This means that for foundation-v8.dts, we only
read the first reg cell (zero) for each cpu node, and receive a lot of
warnings at boot of the form "/cpus/cpu@1: duplicate cpu reg properties
in the DT".

This patch corrects foundation-v8.dts to have the correct value for
/cpus/#address-cells.
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Tested-by: NMarc Zyngier <marc.zyngier@arm.com>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

This patch adds the arm_pm_poweroff definition expected by the
vexpress-poweroff.c driver and enables the latter for arm64.
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Acked-by: NPawel Moll <pawel.moll@arm.com>

This patch enables ARM_GIC on the arm64 kernel.
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

* arm64-prep-gic:
  irqchip: gic: Perform the gic_secondary_init() call via CPU notifier
  irqchip: gic: Call handle_bad_irq() directly
  arm: Move chained_irq_(enter|exit) to a generic file
  arm: Move the set_handle_irq and handle_arch_irq declarations to asm/irq.h

Merge more incoming from Andrew Morton:

 - Various fixes which were stalled or which I picked up recently

 - A large rotorooting of the AIO code.  Allegedly to improve
   performance but I don't really have good performance numbers (I might
   have lost the email) and I can't raise Kent today.  I held this out
   of 3.9 and we could give it another cycle if it's all too late/scary.

I ended up taking only the first two thirds of the AIO rotorooting.  I
left the percpu parts and the batch completion for later.  - Linus

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (33 commits)
  aio: don't include aio.h in sched.h
  aio: kill ki_retry
  aio: kill ki_key
  aio: give shared kioctx fields their own cachelines
  aio: kill struct aio_ring_info
  aio: kill batch allocation
  aio: change reqs_active to include unreaped completions
  aio: use cancellation list lazily
  aio: use flush_dcache_page()
  aio: make aio_read_evt() more efficient, convert to hrtimers
  wait: add wait_event_hrtimeout()
  aio: refcounting cleanup
  aio: make aio_put_req() lockless
  aio: do fget() after aio_get_req()
  aio: dprintk() -> pr_debug()
  aio: move private stuff out of aio.h
  aio: add kiocb_cancel()
  aio: kill return value of aio_complete()
  char: add aio_{read,write} to /dev/{null,zero}
  aio: remove retry-based AIO
  ...

Faster kernel compiles by way of fewer unnecessary includes.

[akpm@linux-foundation.org: fix fallout]
[akpm@linux-foundation.org: fix build]
Signed-off-by: NKent Overstreet <koverstreet@google.com>
Cc: Zach Brown <zab@redhat.com>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Asai Thambi S P <asamymuthupa@micron.com>
Cc: Selvan Mani <smani@micron.com>
Cc: Sam Bradshaw <sbradshaw@micron.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Reviewed-by: N"Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Thanks to Zach Brown's work to rip out the retry infrastructure, we don't
need this anymore - ki_retry was only called right after the kiocb was
initialized.

This also refactors and trims some duplicated code, as well as cleaning up
the refcounting/error handling a bit.

[akpm@linux-foundation.org: use fmode_t in aio_run_iocb()]
[akpm@linux-foundation.org: fix file_start_write/file_end_write tests]
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: NKent Overstreet <koverstreet@google.com>
Cc: Zach Brown <zab@redhat.com>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Asai Thambi S P <asamymuthupa@micron.com>
Cc: Selvan Mani <smani@micron.com>
Cc: Sam Bradshaw <sbradshaw@micron.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Reviewed-by: N"Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

ki_key wasn't actually used for anything previously - it was always 0.
Drop it to trim struct kiocb a bit.
Signed-off-by: NKent Overstreet <koverstreet@google.com>
Cc: Zach Brown <zab@redhat.com>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Asai Thambi S P <asamymuthupa@micron.com>
Cc: Selvan Mani <smani@micron.com>
Cc: Sam Bradshaw <sbradshaw@micron.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Reviewed-by: N"Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

[akpm@linux-foundation.org: make reqs_active __cacheline_aligned_in_smp]
Signed-off-by: NKent Overstreet <koverstreet@google.com>
Cc: Zach Brown <zab@redhat.com>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Asai Thambi S P <asamymuthupa@micron.com>
Cc: Selvan Mani <smani@micron.com>
Cc: Sam Bradshaw <sbradshaw@micron.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Reviewed-by: N"Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

struct aio_ring_info was kind of odd, the only place it's used is where
it's embedded in struct kioctx - there's no real need for it.

The next patch rearranges struct kioctx and puts various things on their
own cachelines - getting rid of struct aio_ring_info now makes that
reordering a bit clearer.
Signed-off-by: NKent Overstreet <koverstreet@google.com>
Cc: Zach Brown <zab@redhat.com>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Asai Thambi S P <asamymuthupa@micron.com>
Cc: Selvan Mani <smani@micron.com>
Cc: Sam Bradshaw <sbradshaw@micron.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Reviewed-by: N"Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Previously, allocating a kiocb required touching quite a few global
(well, per kioctx) cachelines...  so batching up allocation to amortize
those was worthwhile.  But we've gotten rid of some of those, and in
another couple of patches kiocb allocation won't require writing to any
shared cachelines, so that means we can just rip this code out.
Signed-off-by: NKent Overstreet <koverstreet@google.com>
Cc: Zach Brown <zab@redhat.com>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Asai Thambi S P <asamymuthupa@micron.com>
Cc: Selvan Mani <smani@micron.com>
Cc: Sam Bradshaw <sbradshaw@micron.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Reviewed-by: N"Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The aio code tries really hard to avoid having to deal with the
completion ringbuffer overflowing.  To do that, it has to keep track of
the number of outstanding kiocbs, and the number of completions
currently in the ringbuffer - and it's got to check that every time we
allocate a kiocb.  Ouch.

But - we can improve this quite a bit if we just change reqs_active to
mean "number of outstanding requests and unreaped completions" - that
means kiocb allocation doesn't have to look at the ringbuffer, which is
a fairly significant win.
Signed-off-by: NKent Overstreet <koverstreet@google.com>
Cc: Zach Brown <zab@redhat.com>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Asai Thambi S P <asamymuthupa@micron.com>
Cc: Selvan Mani <smani@micron.com>
Cc: Sam Bradshaw <sbradshaw@micron.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>