- 18 1月, 2016 6 次提交
-
-
由 Martin Blumenstingl 提交于
The 8030 is only a "RMII Fast Ethernet PHY", thus it must not have the SUPPORTED_1000* bits set. Signed-off-by: NMartin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Zi Shen Lim 提交于
Code generation functions in arch/arm64/kernel/insn.c previously BUG_ON invalid parameters. Following change of that behavior, now we need to handle the error case where AARCH64_BREAK_FAULT is returned. Instead of error-handling on every emit() in JIT, we add a new validation pass at the end of JIT compilation. There's no point in running JITed code at run-time only to trap due to AARCH64_BREAK_FAULT. Instead, we drop this failed JIT compilation and allow the system to gracefully fallback on the BPF interpreter. Signed-off-by: NZi Shen Lim <zlim.lnx@gmail.com> Suggested-by: NAlexei Starovoitov <ast@kernel.org> Acked-by: NAlexei Starovoitov <ast@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Zi Shen Lim 提交于
During code generation, we used to BUG_ON unknown/unsupported encoding or invalid parameters. Instead, now we report these as errors and simply return the instruction AARCH64_BREAK_FAULT. Users of these codegen helpers should check for and handle this failure condition as appropriate. Otherwise, unhandled codegen failure will result in trapping at run-time due to AARCH64_BREAK_FAULT, which is arguably better than a BUG_ON. Signed-off-by: NZi Shen Lim <zlim.lnx@gmail.com> Acked-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
Re-establish the previous behavior and avoid hashing temporary asocs by checking t->asoc->temp in sctp_(un)hash_transport. Also, remove the check of t->asoc->temp in __sctp_lookup_association, since they are never hashed now. Fixes: 4f008781 ("sctp: apply rhashtable api to send/recv path") Signed-off-by: NXin Long <lucien.xin@gmail.com> Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com> Reported-by: NVlad Yasevich <vyasevich@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Doron Tsur 提交于
With several ConnectX-4 cards installed on a server, one may receive irqn > 255 from the kernel API, which we mistakenly trim to 8bit. This causes EQ creation failure with the following stack trace: [<ffffffff812a11f4>] dump_stack+0x48/0x64 [<ffffffff810ace21>] __setup_irq+0x3a1/0x4f0 [<ffffffff810ad7e0>] request_threaded_irq+0x120/0x180 [<ffffffffa0923660>] ? mlx5_eq_int+0x450/0x450 [mlx5_core] [<ffffffffa0922f64>] mlx5_create_map_eq+0x1e4/0x2b0 [mlx5_core] [<ffffffffa091de01>] alloc_comp_eqs+0xb1/0x180 [mlx5_core] [<ffffffffa091ea99>] mlx5_dev_init+0x5e9/0x6e0 [mlx5_core] [<ffffffffa091ec29>] init_one+0x99/0x1c0 [mlx5_core] [<ffffffff812e2afc>] local_pci_probe+0x4c/0xa0 Fixing it by changing of the irqn type from u8 to unsigned int to support values > 255 Fixes: 61d0e73e ('net/mlx5_core: Use the the real irqn in eq->irqn') Reported-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDoron Tsur <doront@mellanox.com> Signed-off-by: NMatan Barak <matanb@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Geert Uytterhoeven 提交于
In file included from net/ipv4/tcp_ipv4.c:77 (and many more): include/net/tcp_memcontrol.h:5: warning: ‘struct cgroup_subsys’ declared inside parameter list include/net/tcp_memcontrol.h:5: warning: its scope is only this definition or declaration, which is probably not what you want Add forward declarations for all used structures to fix this. Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 1月, 2016 1 次提交
-
-
git://git.open-mesh.org/linux-merge由 David S. Miller 提交于
Antonio Quartulli says: ==================== pull request [net]: batman-adv 20160117 here you have a bunch of patches intended for net. This patchset is provided by Sven Eckelmann and it is basically fixing 2 major issues that exist in several parts of the code - that is why we have 8 patches. The first bugfix (patch 1 and 2) is preventing call_rcu from being invoked recursively. This would deceive any user waiting on rcu_barrier() because the latter won't be able to wait for the nested invocation thus triggering any sort of undefined behaviours. The second bugfix (patches from 3 to 8) prevents the code from freeing rcu protected objects without waiting for the proper grace period. This issue can potentially lead to wrong memory access and thus kernel crashes. Unfortunately this bogus code pattern was copy/pasted all around the place when developing new features, therefore Sven diligently created several patches to address each component independently. Given that such bugs were introduced quite some time ago, all the patches except patch 5 should be considered for submission to stable. Included changes: - avoid recursive invocations of call_rcu() which would fool users waiting on rcu_barrier() - prevent immediate kfree of objects used in rcu protected contexts ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 1月, 2016 33 次提交
-
-
由 Sven Eckelmann 提交于
It is not allowed to free the memory of an object which is part of a list which is protected by rcu-read-side-critical sections without making sure that no other context is accessing the object anymore. This usually happens by removing the references to this object and then waiting until the rcu grace period is over and no one (allowedly) accesses it anymore. But the _now functions ignore this completely. They free the object directly even when a different context still tries to access it. This has to be avoided and thus these functions must be removed and all functions have to use batadv_orig_node_free_ref. Fixes: 72822225 ("batman-adv: Fix rcu_barrier() miss due to double call_rcu() in TT code") Signed-off-by: NSven Eckelmann <sven@narfation.org> Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch> Signed-off-by: NAntonio Quartulli <a@unstable.cc>
-
由 Sven Eckelmann 提交于
It is not allowed to free the memory of an object which is part of a list which is protected by rcu-read-side-critical sections without making sure that no other context is accessing the object anymore. This usually happens by removing the references to this object and then waiting until the rcu grace period is over and no one (allowedly) accesses it anymore. But the _now functions ignore this completely. They free the object directly even when a different context still tries to access it. This has to be avoided and thus these functions must be removed and all functions have to use batadv_hardif_free_ref. Fixes: 89652331 ("batman-adv: split tq information in neigh_node struct") Signed-off-by: NSven Eckelmann <sven@narfation.org> Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch> Signed-off-by: NAntonio Quartulli <a@unstable.cc>
-
由 Sven Eckelmann 提交于
It is not allowed to free the memory of an object which is part of a list which is protected by rcu-read-side-critical sections without making sure that no other context is accessing the object anymore. This usually happens by removing the references to this object and then waiting until the rcu grace period is over and no one (allowedly) accesses it anymore. But the _now functions ignore this completely. They free the object directly even when a different context still tries to access it. This has to be avoided and thus these functions must be removed and all functions have to use batadv_neigh_ifinfo_free_ref. Fixes: 89652331 ("batman-adv: split tq information in neigh_node struct") Signed-off-by: NSven Eckelmann <sven@narfation.org> Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch> Signed-off-by: NAntonio Quartulli <a@unstable.cc>
-
由 Sven Eckelmann 提交于
It is not allowed to free the memory of an object which is part of a list which is protected by rcu-read-side-critical sections without making sure that no other context is accessing the object anymore. This usually happens by removing the references to this object and then waiting until the rcu grace period is over and no one (allowedly) accesses it anymore. But the _now functions ignore this completely. They free the object directly even when a different context still tries to access it. This has to be avoided and thus these functions must be removed and all functions have to use batadv_hardif_neigh_free_ref. Fixes: cef63419 ("batman-adv: add list of unique single hop neighbors per hard-interface") Signed-off-by: NSven Eckelmann <sven@narfation.org> Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch> Signed-off-by: NAntonio Quartulli <a@unstable.cc>
-
由 Sven Eckelmann 提交于
It is not allowed to free the memory of an object which is part of a list which is protected by rcu-read-side-critical sections without making sure that no other context is accessing the object anymore. This usually happens by removing the references to this object and then waiting until the rcu grace period is over and no one (allowedly) accesses it anymore. But the _now functions ignore this completely. They free the object directly even when a different context still tries to access it. This has to be avoided and thus these functions must be removed and all functions have to use batadv_neigh_node_free_ref. Fixes: 89652331 ("batman-adv: split tq information in neigh_node struct") Signed-off-by: NSven Eckelmann <sven@narfation.org> Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch> Signed-off-by: NAntonio Quartulli <a@unstable.cc>
-
由 Sven Eckelmann 提交于
It is not allowed to free the memory of an object which is part of a list which is protected by rcu-read-side-critical sections without making sure that no other context is accessing the object anymore. This usually happens by removing the references to this object and then waiting until the rcu grace period is over and no one (allowedly) accesses it anymore. But the _now functions ignore this completely. They free the object directly even when a different context still tries to access it. This has to be avoided and thus these functions must be removed and all functions have to use batadv_orig_ifinfo_free_ref. Fixes: 7351a482 ("batman-adv: split out router from orig_node") Signed-off-by: NSven Eckelmann <sven@narfation.org> Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch> Signed-off-by: NAntonio Quartulli <a@unstable.cc>
-
由 Sven Eckelmann 提交于
The batadv_nc_node_free_ref function uses call_rcu to delay the free of the batadv_nc_node object until no (already started) rcu_read_lock is enabled anymore. This makes sure that no context is still trying to access the object which should be removed. But batadv_nc_node also contains a reference to orig_node which must be removed. The reference drop of orig_node was done in the call_rcu function batadv_nc_node_free_rcu but should actually be done in the batadv_nc_node_release function to avoid nested call_rcus. This is important because rcu_barrier (e.g. batadv_softif_free or batadv_exit) will not detect the inner call_rcu as relevant for its execution. Otherwise this barrier will most likely be inserted in the queue before the callback of the first call_rcu was executed. The caller of rcu_barrier will therefore continue to run before the inner call_rcu callback finished. Fixes: d56b1705 ("batman-adv: network coding - detect coding nodes and remove these after timeout") Signed-off-by: NSven Eckelmann <sven@narfation.org> Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch> Signed-off-by: NAntonio Quartulli <a@unstable.cc>
-
由 Sven Eckelmann 提交于
The batadv_claim_free_ref function uses call_rcu to delay the free of the batadv_bla_claim object until no (already started) rcu_read_lock is enabled anymore. This makes sure that no context is still trying to access the object which should be removed. But batadv_bla_claim also contains a reference to backbone_gw which must be removed. The reference drop of backbone_gw was done in the call_rcu function batadv_claim_free_rcu but should actually be done in the batadv_claim_release function to avoid nested call_rcus. This is important because rcu_barrier (e.g. batadv_softif_free or batadv_exit) will not detect the inner call_rcu as relevant for its execution. Otherwise this barrier will most likely be inserted in the queue before the callback of the first call_rcu was executed. The caller of rcu_barrier will therefore continue to run before the inner call_rcu callback finished. Fixes: 23721387 ("batman-adv: add basic bridge loop avoidance code") Signed-off-by: NSven Eckelmann <sven@narfation.org> Acked-by: NSimon Wunderlich <sw@simonwunderlich.de> Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch> Signed-off-by: NAntonio Quartulli <a@unstable.cc>
-
由 Ivan Vecera 提交于
The multi-buffer Rx mode implemented in the past introduced a regression that causes a data corruption for received VLAN traffic when VLAN tag stripping is enabled. This mode is supported only be newer chipsets (1860) and is enabled when MTU > 4096. When this mode is enabled Rx queue contains buffers with fixed size 2048 bytes. Any incoming packet larger than 2048 is divided into multiple buffers that are attached as skb frags in polling routine. The driver assumes that all buffers associated with a packet except the last one is fully used (e.g. packet with size 5000 are divided into 3 buffers 2048 + 2048 + 904 bytes) and ignores true size reported in completions. This assumption is usually true but not when VLAN packet is received and VLAN tag stripping is enabled. In this case the first buffer is 2044 bytes long but as the driver always assumes 2048 bytes then 4 extra random bytes are included between the first and the second frag. Additionally the driver sets checksum as correct so the packet is properly processed by the core. The driver needs to check the size of used space in each Rx buffer reported by FW and not blindly use the fixed value. Cc: Rasesh Mody <rasesh.mody@qlogic.com> Signed-off-by: NIvan Vecera <ivecera@redhat.com> Reviewed-by: NRasesh Mody <rasesh.mody@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: "A quick set of bug fixes after there initial networking merge: 1) Netlink multicast group storage allocator only was tested with nr_groups equal to 1, make it work for other values too. From Matti Vaittinen. 2) Check build_skb() return value in macb and hip04_eth drivers, from Weidong Wang. 3) Don't leak x25_asy on x25_asy_open() failure. 4) More DMA map/unmap fixes in 3c59x from Neil Horman. 5) Don't clobber IP skb control block during GSO segmentation, from Konstantin Khlebnikov. 6) ECN helpers for ipv6 don't fixup the checksum, from Eric Dumazet. 7) Fix SKB segment utilization estimation in xen-netback, from David Vrabel. 8) Fix lockdep splat in bridge addrlist handling, from Nikolay Aleksandrov" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (26 commits) bgmac: Fix reversed test of build_skb() return value. bridge: fix lockdep addr_list_lock false positive splat net: smsc: Add support h8300 xen-netback: free queues after freeing the net device xen-netback: delete NAPI instance when queue fails to initialize xen-netback: use skb to determine number of required guest Rx requests net: sctp: Move sequence start handling into sctp_transport_get_idx() ipv6: update skb->csum when CE mark is propagated net: phy: turn carrier off on phy attach net: macb: clear interrupts when disabling them sctp: support to lookup with ep+paddr in transport rhashtable net: hns: fixes no syscon error when init mdio dts: hisi: fixes no syscon fault when init mdio net: preserve IP control block during GSO segmentation fsl/fman: Delete one function call "put_device" in dtsec_config() hip04_eth: fix missing error handle for build_skb failed 3c59x: fix another page map/single unmap imbalance 3c59x: balance page maps and unmaps x25_asy: Free x25_asy on x25_asy_open() failure. mlxsw: fix SWITCHDEV_OBJ_ID_PORT_MDB ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc由 Linus Torvalds 提交于
Pull sparc fixes from David Miller: "Two sparc bug fixes" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc64: Fix numa node distance initialization sparc64: fix incorrect sign extension in sys_sparc64_personality
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux由 Linus Torvalds 提交于
Pull powerpc updates from Michael Ellerman: "Core: - Ground work for the new Power9 MMU from Aneesh Kumar K.V - Optimise FP/VMX/VSX context switching from Anton Blanchard Misc: - Various cleanups from Krzysztof Kozlowski, John Ogness, Rashmica Gupta, Russell Currey, Gavin Shan, Daniel Axtens, Michael Neuling, Andrew Donnellan - Allow wrapper to work on non-english system from Laurent Vivier - Add rN aliases to the pt_regs_offset table from Rashmica Gupta - Fix module autoload for rackmeter & axonram drivers from Luis de Bethencourt - Include KVM guest test in all interrupt vectors from Paul Mackerras - Fix DSCR inheritance over fork() from Anton Blanchard - Make value-returning atomics & {cmp}xchg* & their atomic_ versions fully ordered from Boqun Feng - Print MSR TM bits in oops messages from Michael Neuling - Add TM signal return & invalid stack selftests from Michael Neuling - Limit EPOW reset event warnings from Vipin K Parashar - Remove the Cell QPACE code from Rashmica Gupta - Append linux_banner to exception information in xmon from Rashmica Gupta - Add selftest to check if VSRs are corrupted from Rashmica Gupta - Remove broken GregorianDay() from Daniel Axtens - Import Anton's context_switch2 benchmark into selftests from Michael Ellerman - Add selftest script to test HMI functionality from Daniel Axtens - Remove obsolete OPAL v2 support from Stewart Smith - Make enter_rtas() private from Michael Ellerman - PPR exception cleanups from Michael Ellerman - Add page soft dirty tracking from Laurent Dufour - Add support for Nvlink NPUs from Alistair Popple - Add support for kexec on 476fpe from Alistair Popple - Enable kernel CPU dlpar from sysfs from Nathan Fontenot - Copy only required pieces of the mm_context_t to the paca from Michael Neuling - Add a kmsg_dumper that flushes OPAL console output on panic from Russell Currey - Implement save_stack_trace_regs() to enable kprobe stack tracing from Steven Rostedt - Add HWCAP bits for Power9 from Michael Ellerman - Fix _PAGE_PTE breaking swapoff from Aneesh Kumar K.V - Fix _PAGE_SWP_SOFT_DIRTY breaking swapoff from Hugh Dickins - scripts/recordmcount.pl: support data in text section on powerpc from Ulrich Weigand - Handle R_PPC64_ENTRY relocations in modules from Ulrich Weigand cxl: - cxl: Fix possible idr warning when contexts are released from Vaibhav Jain - cxl: use correct operator when writing pcie config space values from Andrew Donnellan - cxl: Fix DSI misses when the context owning task exits from Vaibhav Jain - cxl: fix build for GCC 4.6.x from Brian Norris - cxl: use -Werror only with CONFIG_PPC_WERROR from Brian Norris - cxl: Enable PCI device ID for future IBM CXL adapter from Uma Krishnan Freescale: - Freescale updates from Scott: Highlights include moving QE code out of arch/powerpc (to be shared with arm), device tree updates, and minor fixes" * tag 'powerpc-4.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (149 commits) powerpc/module: Handle R_PPC64_ENTRY relocations scripts/recordmcount.pl: support data in text section on powerpc powerpc/powernv: Fix OPAL_CONSOLE_FLUSH prototype and usages powerpc/mm: fix _PAGE_SWP_SOFT_DIRTY breaking swapoff powerpc/mm: Fix _PAGE_PTE breaking swapoff cxl: Enable PCI device ID for future IBM CXL adapter cxl: use -Werror only with CONFIG_PPC_WERROR cxl: fix build for GCC 4.6.x powerpc: Add HWCAP bits for Power9 powerpc/powernv: Reserve PE#0 on NPU powerpc/powernv: Change NPU PE# assignment powerpc/powernv: Fix update of NVLink DMA mask powerpc/powernv: Remove misleading comment in pci.c powerpc: Implement save_stack_trace_regs() to enable kprobe stack tracing powerpc: Fix build break due to paca mm_context_t changes cxl: Fix DSI misses when the context owning task exits MAINTAINERS: Update Scott Wood's e-mail address powerpc/powernv: Fix minor off-by-one error in opal_mce_check_early_recovery() powerpc: Fix style of self-test config prompts powerpc/powernv: Only delay opal_rtc_read() retry when necessary ...
-
由 David S. Miller 提交于
Fixes: f1640c3d ("bgmac: fix a missing check for build_skb") Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://github.com/awilliam/linux-vfio由 Linus Torvalds 提交于
Pull VFIO updates from Alex Williamson: - Fixes in AMD xgbe reset, spapr structure padding, type 1 flags (Dan Carpenter, Alexey Kardashevskiy, Pierre Morel) - Re-introduce no-iommu mode, with a user this time (Alex Williamson) * tag 'vfio-v4.5-rc1' of git://github.com/awilliam/linux-vfio: vfio/iommu_type1: make use of info.flags vfio: Include No-IOMMU mode vfio: Add explicit alignments in vfio_iommu_spapr_tce_create VFIO: platform: reset: fix a warning message condition
-
git://linux-nfs.org/~bfields/linux由 Linus Torvalds 提交于
Pull nfsd updates from Bruce Fields: "Smaller bugfixes and cleanup, including a fix for a failures of kerberized NFSv4.1 mounts, and Scott Mayhew's work addressing ACK storms that can affect some high-availability NFS setups" * tag 'nfsd-4.5' of git://linux-nfs.org/~bfields/linux: nfsd: add new io class tracepoint nfsd: give up on CB_LAYOUTRECALLs after two lease periods nfsd: Fix nfsd leaks sunrpc module references lockd: constify nlmsvc_binding structure lockd: use to_delayed_work nfsd: use to_delayed_work Revert "svcrdma: Do not send XDR roundup bytes for a write chunk" lockd: Register callbacks on the inetaddr_chain and inet6addr_chain nfsd: Register callbacks on the inetaddr_chain and inet6addr_chain sunrpc: Add a function to close temporary transports immediately nfsd: don't base cl_cb_status on stale information nfsd4: fix gss-proxy 4.1 mounts for some AD principals nfsd: fix unlikely NULL deref in mach_creds_match nfsd: minor consolidation of mach_cred handling code nfsd: helper for dup of possibly NULL string svcrpc: move some initialization to common code nfsd: fix a warning message nfsd: constify nfsd4_callback_ops structure nfsd: recover: constify nfsd4_client_tracking_ops structures svcrdma: Do not send XDR roundup bytes for a write chunk
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs由 Linus Torvalds 提交于
Pull vfs regression fix from Al Viro: "Fix for braino introduced in vfs.git#work.misc" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: amdkfd: Copy from the proper user command pointer
-
由 Nikolay Aleksandrov 提交于
After promisc mode management was introduced a bridge device could do dev_set_promiscuity from its ndo_change_rx_flags() callback which in turn can be called after the bridge's addr_list_lock has been taken (e.g. by dev_uc_add). This causes a false positive lockdep splat because the port interfaces' addr_list_lock is taken when br_manage_promisc() runs after the bridge's addr list lock was already taken. To remove the false positive introduce a custom bridge addr_list_lock class and set it on bridge init. A simple way to reproduce this is with the following: $ brctl addbr br0 $ ip l add l br0 br0.100 type vlan id 100 $ ip l set br0 up $ ip l set br0.100 up $ echo 1 > /sys/class/net/br0/bridge/vlan_filtering $ brctl addif br0 eth0 Splat: [ 43.684325] ============================================= [ 43.684485] [ INFO: possible recursive locking detected ] [ 43.684636] 4.4.0-rc8+ #54 Not tainted [ 43.684755] --------------------------------------------- [ 43.684906] brctl/1187 is trying to acquire lock: [ 43.685047] (_xmit_ETHER){+.....}, at: [<ffffffff8150169e>] dev_set_rx_mode+0x1e/0x40 [ 43.685460] but task is already holding lock: [ 43.685618] (_xmit_ETHER){+.....}, at: [<ffffffff815072a7>] dev_uc_add+0x27/0x80 [ 43.686015] other info that might help us debug this: [ 43.686316] Possible unsafe locking scenario: [ 43.686743] CPU0 [ 43.686967] ---- [ 43.687197] lock(_xmit_ETHER); [ 43.687544] lock(_xmit_ETHER); [ 43.687886] *** DEADLOCK *** [ 43.688438] May be due to missing lock nesting notation [ 43.688882] 2 locks held by brctl/1187: [ 43.689134] #0: (rtnl_mutex){+.+.+.}, at: [<ffffffff81510317>] rtnl_lock+0x17/0x20 [ 43.689852] #1: (_xmit_ETHER){+.....}, at: [<ffffffff815072a7>] dev_uc_add+0x27/0x80 [ 43.690575] stack backtrace: [ 43.690970] CPU: 0 PID: 1187 Comm: brctl Not tainted 4.4.0-rc8+ #54 [ 43.691270] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.8.1-20150318_183358- 04/01/2014 [ 43.691770] ffffffff826a25c0 ffff8800369fb8e0 ffffffff81360ceb ffffffff826a25c0 [ 43.692425] ffff8800369fb9b8 ffffffff810d0466 ffff8800369fb968 ffffffff81537139 [ 43.693071] ffff88003a08c880 0000000000000000 00000000ffffffff 0000000002080020 [ 43.693709] Call Trace: [ 43.693931] [<ffffffff81360ceb>] dump_stack+0x4b/0x70 [ 43.694199] [<ffffffff810d0466>] __lock_acquire+0x1e46/0x1e90 [ 43.694483] [<ffffffff81537139>] ? netlink_broadcast_filtered+0x139/0x3e0 [ 43.694789] [<ffffffff8153b5da>] ? nlmsg_notify+0x5a/0xc0 [ 43.695064] [<ffffffff810d10f5>] lock_acquire+0xe5/0x1f0 [ 43.695340] [<ffffffff8150169e>] ? dev_set_rx_mode+0x1e/0x40 [ 43.695623] [<ffffffff815edea5>] _raw_spin_lock_bh+0x45/0x80 [ 43.695901] [<ffffffff8150169e>] ? dev_set_rx_mode+0x1e/0x40 [ 43.696180] [<ffffffff8150169e>] dev_set_rx_mode+0x1e/0x40 [ 43.696460] [<ffffffff8150189c>] dev_set_promiscuity+0x3c/0x50 [ 43.696750] [<ffffffffa0586845>] br_port_set_promisc+0x25/0x50 [bridge] [ 43.697052] [<ffffffffa05869aa>] br_manage_promisc+0x8a/0xe0 [bridge] [ 43.697348] [<ffffffffa05826ee>] br_dev_change_rx_flags+0x1e/0x20 [bridge] [ 43.697655] [<ffffffff81501532>] __dev_set_promiscuity+0x132/0x1f0 [ 43.697943] [<ffffffff81501672>] __dev_set_rx_mode+0x82/0x90 [ 43.698223] [<ffffffff815072de>] dev_uc_add+0x5e/0x80 [ 43.698498] [<ffffffffa05b3c62>] vlan_device_event+0x542/0x650 [8021q] [ 43.698798] [<ffffffff8109886d>] notifier_call_chain+0x5d/0x80 [ 43.699083] [<ffffffff810988b6>] raw_notifier_call_chain+0x16/0x20 [ 43.699374] [<ffffffff814f456e>] call_netdevice_notifiers_info+0x6e/0x80 [ 43.699678] [<ffffffff814f4596>] call_netdevice_notifiers+0x16/0x20 [ 43.699973] [<ffffffffa05872be>] br_add_if+0x47e/0x4c0 [bridge] [ 43.700259] [<ffffffffa058801e>] add_del_if+0x6e/0x80 [bridge] [ 43.700548] [<ffffffffa0588b5f>] br_dev_ioctl+0xaf/0xc0 [bridge] [ 43.700836] [<ffffffff8151a7ac>] dev_ifsioc+0x30c/0x3c0 [ 43.701106] [<ffffffff8151aac9>] dev_ioctl+0xf9/0x6f0 [ 43.701379] [<ffffffff81254345>] ? mntput_no_expire+0x5/0x450 [ 43.701665] [<ffffffff812543ee>] ? mntput_no_expire+0xae/0x450 [ 43.701947] [<ffffffff814d7b02>] sock_do_ioctl+0x42/0x50 [ 43.702219] [<ffffffff814d8175>] sock_ioctl+0x1e5/0x290 [ 43.702500] [<ffffffff81242d0b>] do_vfs_ioctl+0x2cb/0x5c0 [ 43.702771] [<ffffffff81243079>] SyS_ioctl+0x79/0x90 [ 43.703033] [<ffffffff815eebb6>] entry_SYSCALL_64_fastpath+0x16/0x7a CC: Vlad Yasevich <vyasevic@redhat.com> CC: Stephen Hemminger <stephen@networkplumber.org> CC: Bridge list <bridge@lists.linux-foundation.org> CC: Andy Gospodarek <gospo@cumulusnetworks.com> CC: Roopa Prabhu <roopa@cumulusnetworks.com> Fixes: 2796d0c6 ("bridge: Automatically manage port promiscuous mode.") Reported-by: NAndy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://neil.brown.name/md由 Linus Torvalds 提交于
Pull md updates from Neil Brown: "Mostly clustered-raid1 and raid5 journal updates. one Y2038 fix and other minor stuff. One patch removes me from the MAINTAINERS file and adds a record of my md maintainership to Credits" Many thanks to Neil, who has been around for a _looong_ time. * tag 'md/4.5' of git://neil.brown.name/md: (26 commits) md/raid: only permit hot-add of compatible integrity profiles Remove myself as MD Maintainer, and add to Credits. raid5-cache: handle journal hotadd in quiesce MD: add journal with array suspended md: set MD_HAS_JOURNAL in correct places md: Remove 'ready' field from mddev. md: remove unnecesary md_new_event_inintr raid5: allow r5l_io_unit allocations to fail raid5-cache: use a mempool for the metadata block raid5-cache: use a bio_set raid5-cache: add journal hot add/remove support drivers: md: use ktime_get_real_seconds() md: avoid warning for 32-bit sector_t raid5-cache: free meta_page earlier raid5-cache: simplify r5l_move_io_unit_list md: update comment for md_allow_write md-cluster: update comments for MD_CLUSTER_SEND_LOCKED_ALREADY md-cluster: Protect communication with mutexes md-cluster: Defer MD reloading to mddev->thread md-cluster: update the documentation ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator由 Linus Torvalds 提交于
Pull regulator updates from Mark Brown: "Aside from a fix for a spurious warning (which caused more problems than it fixed in the fixing really) this is all driver updates, including new drivers for Dialog PV88060/90 and TI LM363x and TPS65086 devices. The qcom_smd driver has had PM8916 and PMA8084 support added" * tag 'regulator-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (36 commits) regulator: core: remove some dead code regulator: core: use dev_to_rdev regulator: lp872x: Get rid of duplicate reference to DVS GPIO regulator: lp872x: Add missing of_match in regulators descriptions regulator: axp20x: Fix GPIO LDO enable value for AXP22x regulator: lp8788: constify regulator_ops structures regulator: wm8*: constify regulator_ops structures regulator: da9*: constify regulator_ops structures regulator: mt6311: Use REGCACHE_RBTREE regulator: tps65917/palmas: Add bypass ops for LDOs with bypass capability regulator: qcom-smd: Add support for PMA8084 regulator: qcom-smd: Add PM8916 support soc: qcom: documentation: Update SMD/RPM Docs regulator: pv88090: logical vs bitwise AND typo regulator: pv88090: Fix irq leak regulator: pv88090: new regulator driver regulator: wm831x-ldo: Use platform_register/unregister_drivers() regulator: wm831x-dcdc: Use platform_register/unregister_drivers() regulator: lp8788-ldo: Use platform_register/unregister_drivers() regulator: core: Fix nested locking of supplies ...
-
由 Yoshinori Sato 提交于
Add H8/300 platform support for smc91x Signed-off-by: NYoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Borislav Petkov 提交于
8f1d57c1 ("amdkfd: don't open-code memdup_user()") mistakenly uses an uninitialized local pointer, gcc complains: drivers/gpu/drm/amd/amdkfd/kfd_chardev.c: In function ‘kfd_ioctl_dbg_address_watch’: drivers/gpu/drm/amd/amdkfd/kfd_chardev.c:562:12: warning: ‘args_buff’ may be used uninitialized in this function [-Wmaybe-uninitialized] args_buff = memdup_user(args_buff, ^ Fix it. Signed-off-by: NBorislav Petkov <bp@suse.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
git://git.linaro.org/landing-teams/working/fujitsu/integration由 Linus Torvalds 提交于
Pull mailbox fixlet from Jussi Brar. * 'mailbox-for-next' of git://git.linaro.org/landing-teams/working/fujitsu/integration: mailbox: constify mbox_chan_ops structure
-
由 David S. Miller 提交于
David Vrabel says: ==================== xen-netback: use skb to determine number of required (etc.) "xen-netback: use skb to determine number of required" plus two other minor fixes I found down the back of the sofa. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Vrabel 提交于
If a queue still has a NAPI instance added to the net device, freeing the queues early results in a use-after-free. The shouldn't ever happen because we disconnect and tear down all queues before freeing the net device, but doing this makes it obviously safe. Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Vrabel 提交于
When xenvif_connect() fails it may leave a stale NAPI instance added to the device. Make sure we delete it in the error path. Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Vrabel 提交于
Using the MTU or GSO size to determine the number of required guest Rx requests for an skb was subtly broken since these value may change at runtime. After 1650d545 (xen-netback: always fully coalesce guest Rx packets) we always fully pack a packet into its guest Rx slots. Calculating the number of required slots from the packet length is then easy. Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Geert Uytterhoeven 提交于
net/sctp/proc.c: In function ‘sctp_transport_get_idx’: net/sctp/proc.c:313: warning: ‘obj’ may be used uninitialized in this function This is currently a false positive, as all callers check for a zero offset first, and handle this case in the exact same way. Move the check and handling into sctp_transport_get_idx() to kill the compiler warning, and avoid future bugs. Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
When a tunnel decapsulates the outer header, it has to comply with RFC 6080 and eventually propagate CE mark into inner header. It turns out IP6_ECN_set_ce() does not correctly update skb->csum for CHECKSUM_COMPLETE packets, triggering infamous "hw csum failure" messages and stack traces. Signed-off-by: NEric Dumazet <edumazet@google.com> Acked-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs由 Linus Torvalds 提交于
Pull UDF fixes and quota cleanups from Jan Kara: "Several UDF fixes and some minor quota cleanups" * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: udf: Check output buffer length when converting name to CS0 udf: Prevent buffer overrun with multi-byte characters quota: constify qtree_fmt_operations structures udf: avoid uninitialized variable use udf: Fix lost indirect extent block udf: Factor out code for creating indirect extent udf: limit the maximum number of indirect extents in a row udf: limit the maximum number of TD redirections fs: make quota/dquot.c explicitly non-modular fs: make quota/netlink.c explicitly non-modular
-
由 Sjoerd Simons 提交于
The operstate of a networking device initially IF_OPER_UNKNOWN aka "unknown", updated on carrier state changes (with carrier state being on by default). This means it will stay unknown unless the carrier state goes to off at some point, which is not the case if the phy is already up/connected at startup. Explicitly turn off the carrier on phy attach, leaving the phy state machine to turn the carrier on when it has done the initial negotiation. Signed-off-by: NSjoerd Simons <sjoerd.simons@collabora.co.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nathan Sullivan 提交于
Disabling interrupts with the IDR register does not stop the macb hardware from asserting its interrupt line if there are interrupts pending. Always clear the interrupts using ISR, and be sure to write it on hardware that is not read-to-clear, like Zynq. Not doing so will cause interrupts when the driver doesn't expect them. Signed-off-by: NNathan Sullivan <nathan.sullivan@ni.com> Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Linus Torvalds 提交于
Merge first patch-bomb from Andrew Morton: - A few hotfixes which missed 4.4 becasue I was asleep. cc'ed to -stable - A few misc fixes - OCFS2 updates - Part of MM. Including pretty large changes to page-flags handling and to thp management which have been buffered up for 2-3 cycles now. I have a lot of MM material this time. [ It turns out the THP part wasn't quite ready, so that got dropped from this series - Linus ] * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (117 commits) zsmalloc: reorganize struct size_class to pack 4 bytes hole mm/zbud.c: use list_last_entry() instead of list_tail_entry() zram/zcomp: do not zero out zcomp private pages zram: pass gfp from zcomp frontend to backend zram: try vmalloc() after kmalloc() zram/zcomp: use GFP_NOIO to allocate streams mm: add tracepoint for scanning pages drivers/base/memory.c: fix kernel warning during memory hotplug on ppc64 mm/page_isolation: use macro to judge the alignment mm: fix noisy sparse warning in LIBCFS_ALLOC_PRE() mm: rework virtual memory accounting include/linux/memblock.h: fix ordering of 'flags' argument in comments mm: move lru_to_page to mm_inline.h Documentation/filesystems: describe the shared memory usage/accounting memory-hotplug: don't BUG() in register_memory_resource() hugetlb: make mm and fs code explicitly non-modular mm/swapfile.c: use list_for_each_entry_safe in free_swap_count_continuations mm: /proc/pid/clear_refs: no need to clear VM_SOFTDIRTY in clear_soft_dirty_pmd() mm: make sure isolate_lru_page() is never called for tail page vmstat: make vmstat_updater deferrable again and shut down on idle ...
-
由 Xin Long 提交于
Now, when we sendmsg, we translate the ep to laddr by selecting the first element of the list, and then do a lookup for a transport. But sctp_hash_cmp() will compare it against asoc addr_list, which may be a subset of ep addr_list, meaning that this chosen laddr may not be there, and thus making it impossible to find the transport. So we fix it by using ep + paddr to lookup transports in hashtable. In sctp_hash_cmp, if .ep is set, we will check if this ep == asoc->ep, or we will do the laddr check. Fixes: d6c0256a ("sctp: add the rhashtable apis for sctp global transport hashtable") Signed-off-by: NXin Long <lucien.xin@gmail.com> Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com> Reported-by: NVlad Yasevich <vyasevich@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-