In preparation for the dax implementation to start associating dax pages
to inodes via page->mapping, we need to provide a 'struct
address_space_operations' instance for dax. Otherwise, direct-I/O
triggers incorrect page cache assumptions and warnings like the
following:

 WARNING: CPU: 27 PID: 1783 at fs/xfs/xfs_aops.c:1468
 xfs_vm_set_page_dirty+0xf3/0x1b0 [xfs]
 [..]
 CPU: 27 PID: 1783 Comm: dma-collision Tainted: G           O 4.15.0-rc2+ #984
 [..]
 Call Trace:
  set_page_dirty_lock+0x40/0x60
  bio_set_pages_dirty+0x37/0x50
  iomap_dio_actor+0x2b7/0x3b0
  ? iomap_dio_zero+0x110/0x110
  iomap_apply+0xa4/0x110
  iomap_dio_rw+0x29e/0x3b0
  ? iomap_dio_zero+0x110/0x110
  ? xfs_file_dio_aio_read+0x7c/0x1a0 [xfs]
  xfs_file_dio_aio_read+0x7c/0x1a0 [xfs]
  xfs_file_read_iter+0xa0/0xc0 [xfs]
  __vfs_read+0xf9/0x170
  vfs_read+0xa6/0x150
  SyS_pread64+0x93/0xb0
  entry_SYSCALL_64_fastpath+0x1f/0x96

...where the default set_page_dirty() handler assumes that dirty state
is being tracked in 'struct page' flags.

Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Suggested-by: NJan Kara <jack@suse.cz>
Suggested-by: NDave Chinner <david@fromorbit.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NJan Kara <jack@suse.cz>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

The ->iomap_begin() operation is a hot path, so cache the
fs_dax_get_by_host() result at mount time to avoid the incurring the
hash lookup overhead on a per-i/o basis.
Reported-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Straight switch over to using iomap for direct I/O - we already have the
non-COW dio path in write_begin for DAX and files with extent size hints,
so nothing to add there.  The COW path is ported over from the old
get_blocks version and a bit of a mess, but I have some work in progress
to make it look more like the buffered I/O COW path.

This gets rid of xfs_get_blocks_direct and the last caller of
xfs_get_blocks with the create flag set, so all that code can be removed.

Last but not least I've removed a comment in xfs_filemap_fault that
refers to xfs_get_blocks entirely instead of updating it - while the
reference is correct, the whole DAX fault path looks different than
the non-DAX one, so it seems rather pointless.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Tested-by: NJens Axboe <axboe@fb.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>

Switch xfs_filemap_pmd_fault() from using dax_pmd_fault() to the new and
improved dax_iomap_pmd_fault().  Also, now that it has no more users,
remove xfs_get_blocks_dax_fault().
Signed-off-by: NRoss Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: NJan Kara <jack@suse.cz>
Signed-off-by: NDave Chinner <david@fromorbit.com>

Modify the writepage handler to find and convert pending delalloc
extents to real allocations.  Furthermore, when we're doing non-cow
writes to a part of a file that already has a CoW reservation (the
cowextsz hint that we set up in a subsequent patch facilitates this),
promote the write to copy-on-write so that the entire extent can get
written out as a single extent on disk, thereby reducing post-CoW
fragmentation.

Christoph moved the CoW support code in _map_blocks to a separate helper
function, refactored other functions, and reduced the number of CoW fork
lookups, so I merged those changes here to reduce churn.
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Rename the current function to __xfs_setfilesize and add a non-static
wrapper that also takes care of creating the transaction.  This new
helper will be used by the new iomap-based DAX path.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>

We control both the callers and callees of ->direct_IO, so remove the
indirect calls.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>

This patch implements two closely related changes:  First it embeds
a bio the ioend structure so that we don't have to allocate one
separately.  Second it uses the block layer bio chaining mechanism
to chain additional bios off this first one if needed instead of
manually accounting for multiple bio completions in the ioend
structure.  Together this removes a memory allocation per ioend and
greatly simplifies the ioend setup and I/O completion path.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NBrian Foster <bfoster@redhat.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>

Completion of an ioend requires us to walk the bufferhead list to
end writback on all the bufferheads. This, in turn, is needed so
that we can end writeback on all the pages we just did IO on.

To remove our dependency on bufferheads in writeback, we need to
turn this around the other way - we need to walk the pages we've
just completed IO on, and then walk the buffers attached to the
pages and complete their IO. In doing this, we remove the
requirement for the ioend to track bufferheads directly.

To enable IO completion to walk all the pages we've submitted IO on,
we need to keep the bios that we used for IO around until the ioend
has been completed. We can do this simply by chaining the bios to
the ioend at completion time, and then walking their pages directly
just before destroying the ioend.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
[hch: changed the xfs_finish_page_writeback calling convention]
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NBrian Foster <bfoster@redhat.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>

Currently adding a buffer to the ioend and then building a bio from
the buffer list are two separate operations. We don't build the bios
and submit them until the ioend is submitted, and this places a
fixed dependency on bufferhead chaining in the ioend.

The first step to removing the bufferhead chaining in the ioend is
on the IO submission side. We can build the bio directly as we add
the buffers to the ioend chain, thereby removing the need for a
latter "buffer-to-bio" submission loop. This allows us to submit
bios on large ioends as soon as we cannot add more data to the bio.

These bios then get captured by the active plug, and hence will be
dispatched as soon as either the plug overflows or we schedule away
from the writeback context. This will reduce submission latency for
large IOs, but will also allow more timely request queue based
writeback blocking when the device becomes congested.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
[hch: various small updates]
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NBrian Foster <bfoster@redhat.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>

dax_clear_blocks() needs a valid struct block_device and previously it
was using inode->i_sb->s_bdev in all cases.  This is correct for normal
inodes on mounted ext2, ext4 and XFS filesystems, but is incorrect for
DAX raw block devices and for XFS real-time devices.

Instead, rename dax_clear_blocks() to dax_clear_sectors(), and change
its arguments to take a bdev and a sector instead of an inode and a
block.  This better reflects what the function does, and it allows the
filesystem and raw block device code to pass in an appropriate struct
block_device.
Signed-off-by: NRoss Zwisler <ross.zwisler@linux.intel.com>
Suggested-by: NDan Williams <dan.j.williams@intel.com>
Reviewed-by: NJan Kara <jack@suse.cz>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Al Viro <viro@ftp.linux.org.uk>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jens Axboe <axboe@fb.com>
Cc: Matthew Wilcox <matthew.r.wilcox@intel.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently we can build a long ioend chain during ->writepages that
gets attached to the writepage context. IO submission only then
occurs when we finish all the writepage processing. This means we
can have many ioends allocated and pending, and this violates the
mempool guarantees that we need to give about forwards progress.
i.e. we really should only have one ioend being built at a time,
otherwise we may drain the mempool trying to allocate a new ioend
and that blocks submission, completion and freeing of ioends that
are already in progress.

To prevent this situation from happening, we need to submit ioends
for IO as soon as they are ready for dispatch rather than queuing
them for later submission. This means the ioends have bios built
immediately and they get queued on any plug that is current active.
Hence if we schedule away from writeback, the ioends that have been
built will make forwards progress due to the plug flushing on
context switch. This will also prevent context switches from
creating unnecessary IO submission latency.

We can't completely avoid having nested IO allocation - when we have
a block size smaller than a page size, we still need to hold the
ioend submission until after we have marked the current page dirty.
Hence we may need multiple ioends to be held while the current page
is completely mapped and made ready for IO dispatch. We cannot avoid
this problem - the current code already has this ioend chaining
within a page so we can mostly ignore that it occurs.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDave Chinner <david@fromorbit.com>

xfs_vm_writepages() calls generic_writepages to writeback a range of
a file, but then xfs_vm_writepage() clusters pages itself as it does
not have any context it can pass between->writepage calls from
__write_cache_pages().

Introduce a writeback context for xfs_vm_writepages() and call
__write_cache_pages directly with our own writepage callback so that
we can pass that context to each writepage invocation. This
encapsulates the current mapping, whether it is valid or not, the
current ioend and it's IO type and the ioend chain being built.

This requires us to move the ioend submission up to the level where
the writepage context is declared. This does mean we do not submit
IO until we packaged the entire writeback range, but with the block
plugging in the writepages call this is the way IO is submitted,
anyway.

It also means that we need to handle discontiguous page ranges.  If
the pages sent down by write_cache_pages to the writepage callback
are discontiguous, we need to detect this and put each discontiguous
page range into individual ioends. This is needed to ensure that the
ioend accurately represents the range of the file that it covers so
that file size updates during IO completion set the size correctly.
Failure to take into account the discontiguous ranges results in
files being too small when writeback patterns are non-sequential.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDave Chinner <david@fromorbit.com>

For DAX, we are now doing block zeroing during allocation. This
means we no longer need a special DAX fault IO completion callback
to do unwritten extent conversion. Because mmap never extends the
file size (it SEGVs the process) we don't need a callback to update
the file size, either. Hence we can remove the completion callbacks
from the __dax_fault and __dax_mkwrite calls.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>

Both direct IO and DAX pass an offset and count into get_blocks that
will overflow a s64 variable when an IO goes into the last supported
block in a file (i.e. at offset 2^63 - 1FSB bytes). This can be seen
from the tracing:

xfs_get_blocks_alloc: [...] offset 0x7ffffffffffff000 count 4096
xfs_gbmap_direct:     [...] offset 0x7ffffffffffff000 count 4096
xfs_gbmap_direct_none:[...] offset 0x7ffffffffffff000 count 4096

0x7ffffffffffff000 + 4096 = 0x8000000000000000, and hence that
overflows the s64 offset and we fail to detect the need for a
filesize update and an ioend is not allocated.

This is *mostly* avoided for direct IO because such extending IOs
occur with full block allocation, and so the "IS_UNWRITTEN()" check
still evaluates as true and we get an ioend that way. However, doing
single sector extending IOs to this last block will expose the fact
that file size updates will not occur after the first allocating
direct IO as the overflow will then be exposed.

There is one further complexity: the DAX page fault path also
exposes the same issue in block allocation. However, page faults
cannot extend the file size, so in this case we want to allocate the
block but do not want to allocate an ioend to enable file size
update at IO completion. Hence we now need to distinguish between
the direct IO patch allocation and dax fault path allocation to
avoid leaking ioend structures.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>

Add the initial support for DAX file operations to XFS. This
includes the necessary block allocation and mmap page fault hooks
for DAX to function.

Note that there are changes to the splice interfaces to ensure that
for DAX splice avoids direct page cache manipulations and instead
takes the DAX IO paths for read/write operations.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>

Back in the days when the direct I/O ->end_io callback could be called
from interrupt context for AIO we needed a structure to hand off to the
workqueue, and reused the ioend structure for this purpose.  These days
->end_io is always called from user or workqueue context, which allows us
to avoid this memory allocation and simplify the code significantly.

[dchinner: removed now unused xfs_finish_ioend_sync() function after
	   Brian Foster did an initial review. ]
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>

Add support to the core direct-io code to defer AIO completions to user
context using a workqueue.  This replaces opencoded and less efficient
code in XFS and ext4 (we save a memory allocation for each direct IO)
and will be needed to properly support O_(D)SYNC for AIO.

The communication between the filesystem and the direct I/O code requires
a new buffer head flag, which is a bit ugly but not avoidable until the
direct I/O code stops abusing the buffer_head structure for communicating
with the filesystems.

Currently this creates a per-superblock unbound workqueue for these
completions, which is taken from an earlier patch by Jan Kara.  I'm
not really convinced about this use and would prefer a "normal" global
workqueue with a high concurrency limit, but this needs further discussion.

JK: Fixed ext4 part, dynamic allocation of the workqueue.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Add a XFS_ prefix to IO_DIRECT,XFS_IO_DELALLOC, XFS_IO_UNWRITTEN and
XFS_IO_OVERWRITE. This to avoid namespace conflict with other modules.
Signed-off-by: NAlain Renaud <arenaud@sgi.com>
Reviewed-by: NRich Johnston <rjohnston@sgi.com>
Signed-off-by: NBen Myers <bpm@sgi.com>

Do not use unlogged metadata updates and the VFS dirty bit for updating
the file size after writeback.  In addition to causing various problems
with updates getting delayed for far too long this also drags in the
unscalable VFS dirty tracking, and is one of the few remaining unlogged
metadata updates.
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NMark Tinguely <tinguely@sgi.com>
Signed-off-by: NBen Myers <bpm@sgi.com>

The new concurrency managed workqueues are cheap enough that we can create
per-filesystem instead of global workqueues.  This allows us to remove the
trylock or defer scheme on the ilock, which is not helpful once we have
outstanding log reservations until finishing a size update.

Also allow the default concurrency on this workqueues so that I/O completions
blocking on the ilock for one inode do not block process for another inode.
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NMark Tinguely <tinguely@sgi.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NBen Myers <bpm@sgi.com>

We now have an i_dio_count filed and surrounding infrastructure to wait
for direct I/O completion instead of i_icount, and we have never needed
to iocount waits for buffered I/O given that we only set the page uptodate
after finishing all required work.  Thus remove i_iocount, and replace
the actually needed waits with calls to inode_dio_wait.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NAlex Elder <aelder@sgi.com>

We really shouldn't complete AIO or DIO requests until we have finished
the unwritten extent conversion and size update.  This means fsync never
has to pick up any ioends as all work has been completed when signalling
I/O completion.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NAlex Elder <aelder@sgi.com>

Use the move from Linux 2.6 to Linux 3.x as an excuse to kill the
annoying subdirectories in the XFS source code.  Besides the large
amount of file rename the only changes are to the Makefile, a few
files including headers with the subdirectory prefix, and the binary
sysctl compat code that includes a header under fs/xfs/ from
kernel/.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAlex Elder <aelder@sgi.com>

Opencode the xfs_iomap code in it's two callers.  The overlap of
passed flags already was minimal and will be further reduced in the
next patch.

As a side effect the BMAPI_* flags for xfs_bmapi and the IO_* flags
for I/O end processing are merged into a single set of flags, which
should be a bit more descriptive of the operation we perform.

Also improve the tracing by giving each caller it's own type set of
tracepoints.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NAlex Elder <aelder@sgi.com>

Filesystems with unwritten extent support must not complete an AIO request
until the transaction to convert the extent has been commited.  That means
the aio_complete calls needs to be moved into the ->end_io callback so
that the filesystem can control when to call it exactly.

This makes a bit of a mess out of dio_complete and the ->end_io callback
prototype even more complicated. 
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz> 
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Filesystems with unwritten extent support must not complete an AIO request
until the transaction to convert the extent has been commited.  That means
the aio_complete calls needs to be moved into the ->end_io callback so
that the filesystem can control when to call it exactly.

This makes a bit of a mess out of dio_complete and the ->end_io callback
prototype even more complicated.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NJan Kara <jack@suse.cz>
Signed-off-by: NAlex Elder <aelder@sgi.com>

The writepage implementation in XFS still tries to deal with dirty but
unmapped buffers which used to caused by writes through shared mmaps.  Since
the introduction of ->page_mkwrite these can't happen anymore, so remove the
code dealing with them.

Note that the all_bh variable which causes us to start I/O on all buffers on
the pages was controlled by the count of unmapped buffers, which also
included those not actually dirty.  It's now unconditionally initialized to
0 but set to 1 for the case of small file size extensions.  It probably can
be removed entirely, but that's left for another patch.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDave Chinner <dchinner@redhat.com>

Convert the old xfs tracing support that could only be used with the
out of tree kdb and xfsidbg patches to use the generic event tracer.

To use it make sure CONFIG_EVENT_TRACING is enabled and then enable
all xfs trace channels by:

   echo 1 > /sys/kernel/debug/tracing/events/xfs/enable

or alternatively enable single events by just doing the same in one
event subdirectory, e.g.

   echo 1 > /sys/kernel/debug/tracing/events/xfs/xfs_ihold/enable

or set more complex filters, etc. In Documentation/trace/events.txt
all this is desctribed in more detail.  To reads the events do a

   cat /sys/kernel/debug/tracing/trace

Compared to the last posting this patch converts the tracing mostly to
the one tracepoint per callsite model that other users of the new
tracing facility also employ.  This allows a very fine-grained control
of the tracing, a cleaner output of the traces and also enables the
perf tool to use each tracepoint as a virtual performance counter,
     allowing us to e.g. count how often certain workloads git various
     spots in XFS.  Take a look at

    http://lwn.net/Articles/346470/

for some examples.

Also the btree tracing isn't included at all yet, as it will require
additional core tracing features not in mainline yet, I plan to
deliver it later.

And the really nice thing about this patch is that it actually removes
many lines of code while adding this nice functionality:

 fs/xfs/Makefile                |    8
 fs/xfs/linux-2.6/xfs_acl.c     |    1
 fs/xfs/linux-2.6/xfs_aops.c    |   52 -
 fs/xfs/linux-2.6/xfs_aops.h    |    2
 fs/xfs/linux-2.6/xfs_buf.c     |  117 +--
 fs/xfs/linux-2.6/xfs_buf.h     |   33
 fs/xfs/linux-2.6/xfs_fs_subr.c |    3
 fs/xfs/linux-2.6/xfs_ioctl.c   |    1
 fs/xfs/linux-2.6/xfs_ioctl32.c |    1
 fs/xfs/linux-2.6/xfs_iops.c    |    1
 fs/xfs/linux-2.6/xfs_linux.h   |    1
 fs/xfs/linux-2.6/xfs_lrw.c     |   87 --
 fs/xfs/linux-2.6/xfs_lrw.h     |   45 -
 fs/xfs/linux-2.6/xfs_super.c   |  104 ---
 fs/xfs/linux-2.6/xfs_super.h   |    7
 fs/xfs/linux-2.6/xfs_sync.c    |    1
 fs/xfs/linux-2.6/xfs_trace.c   |   75 ++
 fs/xfs/linux-2.6/xfs_trace.h   | 1369 +++++++++++++++++++++++++++++++++++++++++
 fs/xfs/linux-2.6/xfs_vnode.h   |    4
 fs/xfs/quota/xfs_dquot.c       |  110 ---
 fs/xfs/quota/xfs_dquot.h       |   21
 fs/xfs/quota/xfs_qm.c          |   40 -
 fs/xfs/quota/xfs_qm_syscalls.c |    4
 fs/xfs/support/ktrace.c        |  323 ---------
 fs/xfs/support/ktrace.h        |   85 --
 fs/xfs/xfs.h                   |   16
 fs/xfs/xfs_ag.h                |   14
 fs/xfs/xfs_alloc.c             |  230 +-----
 fs/xfs/xfs_alloc.h             |   27
 fs/xfs/xfs_alloc_btree.c       |    1
 fs/xfs/xfs_attr.c              |  107 ---
 fs/xfs/xfs_attr.h              |   10
 fs/xfs/xfs_attr_leaf.c         |   14
 fs/xfs/xfs_attr_sf.h           |   40 -
 fs/xfs/xfs_bmap.c              |  507 +++------------
 fs/xfs/xfs_bmap.h              |   49 -
 fs/xfs/xfs_bmap_btree.c        |    6
 fs/xfs/xfs_btree.c             |    5
 fs/xfs/xfs_btree_trace.h       |   17
 fs/xfs/xfs_buf_item.c          |   87 --
 fs/xfs/xfs_buf_item.h          |   20
 fs/xfs/xfs_da_btree.c          |    3
 fs/xfs/xfs_da_btree.h          |    7
 fs/xfs/xfs_dfrag.c             |    2
 fs/xfs/xfs_dir2.c              |    8
 fs/xfs/xfs_dir2_block.c        |   20
 fs/xfs/xfs_dir2_leaf.c         |   21
 fs/xfs/xfs_dir2_node.c         |   27
 fs/xfs/xfs_dir2_sf.c           |   26
 fs/xfs/xfs_dir2_trace.c        |  216 ------
 fs/xfs/xfs_dir2_trace.h        |   72 --
 fs/xfs/xfs_filestream.c        |    8
 fs/xfs/xfs_fsops.c             |    2
 fs/xfs/xfs_iget.c              |  111 ---
 fs/xfs/xfs_inode.c             |   67 --
 fs/xfs/xfs_inode.h             |   76 --
 fs/xfs/xfs_inode_item.c        |    5
 fs/xfs/xfs_iomap.c             |   85 --
 fs/xfs/xfs_iomap.h             |    8
 fs/xfs/xfs_log.c               |  181 +----
 fs/xfs/xfs_log_priv.h          |   20
 fs/xfs/xfs_log_recover.c       |    1
 fs/xfs/xfs_mount.c             |    2
 fs/xfs/xfs_quota.h             |    8
 fs/xfs/xfs_rename.c            |    1
 fs/xfs/xfs_rtalloc.c           |    1
 fs/xfs/xfs_rw.c                |    3
 fs/xfs/xfs_trans.h             |   47 +
 fs/xfs/xfs_trans_buf.c         |   62 -
 fs/xfs/xfs_vnodeops.c          |    8
 70 files changed, 2151 insertions(+), 2592 deletions(-)
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAlex Elder <aelder@sgi.com>

Unwritten extent conversion can recurse back into the filesystem due
to memory allocation. Memory reclaim requires I/O completions to be
processed to allow the callers to make progress. If the I/O
completion workqueue thread is doing the recursion, then we have a
deadlock situation.

Move unwritten extent completion into it's own workqueue so it
doesn't block I/O completions for normal delayed allocation or
overwrite data.
Signed-off-by: NDave Chinner <david@fromorbit.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>

Signed-off-by: NEric Sandeen <sandeen@sandeen.net>
Reviewed-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

The whole machinery to wait on I/O completion is related to the I/O path
and should be there instead of in xfs_vnode.c.  Also give the functions
more descriptive names.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDave Chinner <david@fromorbit.com>
Signed-off-by: NNiv Sardi <xaiki@sgi.com>

struct bhv_vnode is on it's way out, so move the I/O count to the XFS
inode.

SGI-PV: 969608
SGI-Modid: xfs-linux-melb:xfs-kern:29497a
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NDavid Chinner <dgc@sgi.com>
Signed-off-by: NTim Shimmin <tes@sgi.com>

Same as with already do with the file operations: keep them in .rodata and
prevents people from doing runtime patching.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Cc: Steven French <sfrench@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

SGI-PV: 953338
SGI-Modid: xfs-linux-melb:xfs-kern:26107a
Signed-off-by: NNathan Scott <nathans@sgi.com>

SGI-PV: 904196
SGI-Modid: xfs-linux-melb:xfs-kern:26101a
Signed-off-by: NNathan Scott <nathans@sgi.com>

shutdown vop flags consistent with sync vop flags declarations too.

SGI-PV: 939911
SGI-Modid: xfs-linux-melb:xfs-kern:26096a
Signed-off-by: NNathan Scott <nathans@sgi.com>

Signed-off-by: NNathan Scott <nathans@sgi.com>

naming.

SGI-PV: 950556
SGI-Modid: xfs-linux-melb:xfs-kern:25378a
Signed-off-by: NNathan Scott <nathans@sgi.com>

allows us to submit much larger I/Os instead of sending down lots of small
buffer_heads.  To do this we need to have a rather complicated I/O
submission and completion tracking infrastructure.  Part of the latter has
been merged already a long time ago for direct I/O support. Part of the
problem is that we need to track sub-pagesize regions and for that we
still need buffer_heads for the time beeing.  Long-term I hope we can move
to better data strucutures and/or maybe move this to fs/mpage.c instead of
having it in XFS.  Original patch from Nathan Scott with various updates
from David Chinner and Christoph Hellwig.

SGI-PV: 947118
SGI-Modid: xfs-linux-melb:xfs-kern:203822a
Signed-off-by: NChristoph Hellwig <hch@sgi.com>
Signed-off-by: NNathan Scott <nathans@sgi.com>