Modules: Documentation,PCI drivers,Digigram PCXHR driver

Add Digigram PCXHR driver.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: VIA82xx driver

Added dxs_support entry for ASRock mobo.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: AC97 Codec

Small fix for ALC65x codec, sync with Realtek's driver codes:
- Rename 'IEC958 Playback Route' to 'IEC958 Playback Source' so that
  mixer can handle it properly
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: HDA Codec driver,HDA generic driver

This patch adds the support of ALC262,ALC883,ALC885,ALC861 to driver
More models and improvements for ALC880, ALC260 and ALC882 codecs, too.
Signed-off-by: NKailang Yang <kailang@realtek.com.tw>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: ICE1724 driver

Added the basic support of M-Audio Revolution 5.1.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: EMU10K1/EMU10K2 driver

sound/pci/emu10k1/emufx.c: In function 'snd_emu10k1_efx_alloc_pm_buffer':
sound/pci/emu10k1/emufx.c:2402: error: implicit declaration of function 'vmalloc'
sound/pci/emu10k1/emufx.c:2402: warning: assignment makes pointer from integer without a cast
sound/pci/emu10k1/emufx.c: In function 'snd_emu10k1_efx_free_pm_buffer':
sound/pci/emu10k1/emufx.c:2413: error: implicit declaration of function 'vfree'
Signed-off-by: NAndreas Schwab <schwab@suse.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: EMU10K1/EMU10K2 driver

Distorted sound now comes from the Audio Out socket. Still more work to do.
Signed-off-by: NJames Courtier-Dutton <James@superbug.co.uk>

Modules: PPC PMAC driver

The last addition of 17' powerbook support seems buggy
(it's not Toonie indeed).  Removed again.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: au88x0 driver

pci_dma_supported() is called right before pci_set_dma_mask() which already
calls pci_dma_supported().  The attached patch removes the unneeded call to
pci_dma_supported()

Additionally the custom VORTEX_DMA_MASK macro is replaced by DMA_32BIT_MASK
from linux/dma-mapping.h
Signed-off-by: NTobias Klauser <tklauser@nuerscht.ch>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: ALSA Core,PCM Midlevel

Make the support of old API selectable via config option.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Optimize the code when compiled without CONFIG_PROC_FS for some pci drivers.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: SPARC DBRI driver

Don't return errors if the proc file can't be created (for the case
without CONFIG_PROC_FS).
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: ALSA<-OSS emulation,ALSA sequencer,ALSA<-OSS sequencer

Optimize the code when compiled without CONFIG_PROC_FS (in seq and oss
emulation parts).
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: HWDEP Midlevel,ALSA Core,PCM Midlevel,Timer Midlevel

Optimize the code when compiled without CONFIG_PROC_FS.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: PPC PMAC driver

The audio chip in my Spring 2005 17' PowerBook was incorrectly
recognized as an AWACS chip.  This adds the chip ID to the
snd_powermac driver such that it is recognized as a Toonie (I don't
know if that's correct, but it's the only one that makes it work at
all). and sorts the ID lists numerically.  NOTE:  This chip is only
minimally supported at this point; it has system beep support and
very low volume speaker output, and that's about it.
Signed-off-by: NKyle Moffett <mrmacman_g4@mac.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: AD1848 driver

Fix compilation without CONFIG_PM.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: HDA Codec driver

- Explictly set pin control as input for all input pins
- Fix bug in 922x mixer (no mute on adc0vol)
- Remove broken ch_mode control
- Add support for jack retasking mixer controls to use rear line and
  mic as surround outputs
- Add board tables to support autodetect and pin config defaults for
  systems with broken bioses
- Add support for several Intel mobos
- Add support for DFI mobo with reference boards attached
  (gets rid of compile time switch to use reference boards)
Signed-off-by: NMatt Porter <mporter@embeddedalley.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: Sound Core,Generic drivers

AC97 Kconfig entries broke the ALSA device drivers menu, so move them to a
location where that won't happen, enabling all device sub-menus to be
presented together.

Fixed for the latest ALSA tree by Takashi Iwai <tiwai@suse.de>.
Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: HDA Intel driver

The probe_mask module parameter comment notes that the intended
default is -1. Fix it to be so, otherwise all codecs are skipped
and init fails.
Signed-off-by: NMatt Porter <mporter@embeddedalley.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: ENS1370/1+ driver

- spdif module option: some hardware revisions are without spdif output
- lineio module option: force shared line in / rear out jack settings
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Modules: AC97 Codec

The following patch adds some extra IDs for the list of hardware which
should have headphone line sense enabled by default.
Signed-off-by: NMatthew Garrett <mjg59@srcf.ucam.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: HDA Codec driver

Fixed the swapped surround/CLFE on 3stack mode of AD1988.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: HDA Codec driver

Fix/enhance AD1988 support code.

- Fix for h/w bug of AD1988A rev 2
- The BIOS auto-configuration is added and used as fallback
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: HDA Codec driver

Fix the channel mode helper (for put callback).
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: HDA Intel driver

- Use the position buffer for obtaining the current DMA position
  as default.  This seems more stable than others.
- Add probe_mask module option (mainly for test boards with multiple
  codecs).
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: HDA Codec driver

This patch is to fix the problem of calculating the nid incorrectly
when auto-probe for ALC880. The problem to be fixed often behaves
with such words when using dmesg, 'num_steps = 0 for NID=0x8' when
auto-probe for ALC880.

The patch contains:
- alsa-kernel/pci/hda/patch_realtek.c: replace 'alc880_dac_to_idx'
  with 'alc880_idx_to_dac' in function 'alc880_auto_fill_dac_nids()'
Signed-off-by: NLibin Yang <libin.yang@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: RawMidi Midlevel,HDA generic driver

This patch contains the following possible cleanups:
- pci/hda/hda_proc.c should #include 'hda_local.h' for including the
  prototype of it's global function snd_hda_codec_proc_new()
- core/rawmidi.c: make the needlessly global and EXPORT_SYMBOL'ed
  function snd_rawmidi_info() static
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: ALSA Core

Fix missing include <linux/device.h>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: ICE1712 driver

Fix the inverted switch of 'Front Digital Input' of Terratec DMX 6Fire.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: USB generic driver

Somebody at Edirol fucked up and released a new revision of the UA-20
without class-specific descriptors, so now we have to hard-code the
sample format.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

Modules: HDA Codec driver

Fix AD1988 support.  As default, 6stack model is used.
Still no auto-BIOS setup is implemented.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: HDA generic driver

Allocate connection lists dynamically in generic parser.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: HDA Codec driver,HDA generic driver

- Fix connection list parsing (with ranged flag).
- Increase the max number of connections
- Introduce widget capabilities cache
- Power up/down widgets at init, suspend and resume
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: RawMidi Midlevel

When the output buffer size is changed, runtime->avail must be
adjusted to the new size; otherwise, draining of a bigger buffer would
appear to fail because avail does not reach buffer_size.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

Modules: Documentation

Fix all places in the docs where the card number limit is mentioned.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

Modules: ALSA Core,Memalloc module,ALSA sequencer

With dynamic minor numbers, we can increase the number of sound cards.

This requires that the sequencer client numbers of some kernel drivers
are allocated dynamically, too.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

Modules: ALSA sequencer,Generic drivers

To allow increasing the maximum number of sound cards, we have to limit
the number of sequencer clients per card because client numbers are
still allocated statically.

Reducing the number of clients to four limits the number of sequencer
MIDI ports to 1024 per card.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

Modules: ALSA Core,ALSA Minor Numbers

Add an option to allocate device file minor numbers dynamically.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

Instead of storing the pointers to the device-specific structures in an
array, put them into the struct snd_minor, and look them up dynamically.

This makes the device type modules independent of the minor number
encoding.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

Modules: ALSA Core

Store the snd_minor structure pointers in one array instead of using a
separate list for each card.  This simplifies the mapping from device
files to minor struct by removing the need to know about the encoding
of the card number in the minor number.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>