- 18 10月, 2016 1 次提交
-
-
由 Laurent Pinchart 提交于
The driver uses drm_fb_get_bpp_depth() to check whether it can support the format requested by userspace when creating a framebuffer. This isn't the right API, as it doesn't differentiate between RGB formats other than on a depth and bpp basis. Fixing this requires non trivial changes to the drivers internals. As a first step, replace usage of the drm_fb_get_bpp_depth() function with an equivalent check based on drm_format_info(). This is part of a wider effort to remove usage of the drm_fb_get_bpp_depth() function in drivers. Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: NArchit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1476744081-24485-9-git-send-email-laurent.pinchart@ideasonboard.com
-
- 13 10月, 2016 3 次提交
-
-
由 Jiang Biao 提交于
Added comments for new parameters. Signed-off-by: NJiang Biao <jiang.biao2@zte.com.cn> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1476238699-25820-1-git-send-email-jiang.biao2@zte.com.cn
-
由 Jiang Biao 提交于
Remove useless comment in framebuffer.c. Signed-off-by: NJiang Biao <jiang.biao2@zte.com.cn> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1476165825-12137-1-git-send-email-jiang.biao2@zte.com.cn
-
由 Shyam Saini 提交于
Replace explicit computation of vma page count by a call to vma_pages() Signed-off-by: NShyam Saini <mayhs11saini@gmail.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1476054436-9378-1-git-send-email-mayhs11saini@gmail.com
-
- 24 8月, 2016 1 次提交
-
-
由 Masahiro Yamada 提交于
Commit d112a816 ("gma500/cdv: Add eDP support") replaced the code inside this if-conditional with gma_backlight_set(), which becomes a nop stub if CONFIG_BACKLIGHT_CLASS_DEVICE is disabled. So, there is no need to guard the caller with config_enabled(). Note: This is one of remaining TODOs to deprecate config_enabled() macro. Refer to commit 97f2645f ("tree-wide: replace config_enabled() with IS_ENABLED()"). Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1471970574-23906-1-git-send-email-yamada.masahiro@socionext.com
-
- 17 8月, 2016 1 次提交
-
-
由 Daniel Vetter 提交于
No one looks at it, only i915/gma500 lvds even bother to fill it out. I guess a very old plan was to use this for filtering modes, but that's already done within the edid parser. v2: Move misplaced hunk to this patch. Reviewed-by: NSean Paul <seanpaul@chromium.org> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1471034937-651-18-git-send-email-daniel.vetter@ffwll.ch
-
- 12 8月, 2016 1 次提交
-
-
由 Daniel Vetter 提交于
Everyone who uses the fbdev emulation helpers doesn't need to include fb.h directly. Remove it. Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1470847958-28465-3-git-send-email-daniel.vetter@ffwll.ch
-
- 28 7月, 2016 1 次提交
-
-
由 Stefan Christ 提交于
Stub implementation of fb_ioctl can be omitted, because function do_fb_ioctl already returns -ENOTTY when fb_ioctl is not assigned. Signed-off-by: NStefan Christ <s.christ@phytec.de> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1469622270-10803-1-git-send-email-s.christ@phytec.de
-
- 22 7月, 2016 1 次提交
-
-
由 Markus Elfring 提交于
The functions pci_dev_put() and psb_intel_i2c_destroy() test whether their argument is NULL and then return immediately. Thus the tests around their calls are not needed. This issue was detected by using the Coccinelle software. Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/f1a0fd83-4320-f3db-e1bb-3b9832a4429f@users.sourceforge.net
-
- 18 7月, 2016 1 次提交
-
-
由 Tobias Jakobi 提交于
Currently enabling Intel GMA DRM support automatically pulls in fbdev dependency. However this dep is unnecessary since DRM core already handles this for us (DRM_FBDEV_EMULATION). Signed-off-by: NTobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1468586897-32298-11-git-send-email-tjakobi@math.uni-bielefeld.de
-
- 14 6月, 2016 1 次提交
-
-
由 Gustavo Padovan 提交于
Replace the legacy drm_vblank_{on,off}() with the new helper functions. Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk> Acked-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1465308482-15104-7-git-send-email-gustavo@padovan.org
-
- 07 6月, 2016 1 次提交
-
-
由 Maarten Lankhorst 提交于
Change return value to int to propagate errors from gamma_set, and remove start parameter. Updates always use the full size, and some drivers even ignore the start parameter altogether. This is needed for atomic drivers, where an atomic commit can fail with -EINTR or -ENOMEM and should be restarted. This is already and issue for drm_atomic_helper_legacy_set_gamma, which this patch fixes up. Changes since v1: - Fix compiler warning. (Emil) - Fix commit message (Daniel) Cc: Alex Deucher <alexander.deucher@amd.com> Acked-by: NAlex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Eric Anholt <eric@anholt.net> Cc: VMware Graphics <linux-graphics-maintainer@vmware.com> Cc: Mathieu Larouche <mathieu.larouche@matrox.com> Cc: Thierry Reding <treding@nvidia.com> Acked-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com> [danvet: Improve commit message a bit more, mention that this fixes the helper.] Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/742944bc-9f41-1acb-df4f-0fd4c8a10168@linux.intel.com
-
- 31 5月, 2016 1 次提交
-
-
由 Daniel Vetter 提交于
Code stolen from gma500. This is just a minor bit of safety code that I spotted and figured it might be useful if we put it into the core. This is to make the get_gamma ioctl reflect likely reality even before the first set_gamma ioctl call. v2 on irc: Extend commit message per Maarten's suggestions. Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1459331485-28376-2-git-send-email-daniel.vetter@ffwll.ch
-
- 21 5月, 2016 1 次提交
-
-
由 Daniel Vetter 提交于
This was added in commit 0a3e67a4 Author: Jesse Barnes <jbarnes@virtuousgeek.org> Date: Tue Sep 30 12:14:26 2008 -0700 drm: Rework vblank-wait handling to allow interrupt reduction. to stay backwards-compatible with old UMS code that didn't even tell the kernel when it did a modeset, so that the kernel could save/restore vblank counters. At worst this means vblanks will be somewhat funky on a setup that very likely no one still runs. So let's just nuke it. Plan B would be to set it unconditionally in drm_vblank_init for kms drivers, instead of in each driver separately. So if this patch breaks anything please only restore the hunks in drmP.h and drm_irq.c, plus add a check for DRIVER_MODESET in drm_vblank_init. Stumbled over this in a discussion on irc with Chris. Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Eric Anholt <eric@anholt.net> Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Cc: Inki Dae <inki.dae@samsung.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Mark Yao <mark.yao@rock-chips.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Acked-by: NLiviu Dudau <Liviu.Dudau@arm.com> Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 17 5月, 2016 1 次提交
-
-
由 Chris Wilson 提交于
drm_gem_object_lookup() has never required the drm_device for its file local translation of the user handle to the GEM object. Let's remove the unused parameter and save some space. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: dri-devel@lists.freedesktop.org Cc: Dave Airlie <airlied@redhat.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> [danvet: Fixup kerneldoc too.] Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
- 08 4月, 2016 3 次提交
-
-
由 Alan 提交于
Both cases produce the same result. Kill the junk code. Signed-off-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com>
-
由 Itai Handler 提交于
Fix possible out of bounds read, by adding missing comma. The code may read pass the end of the dsi_errors array when the most significant bit (bit #31) in the intr_stat register is set. This bug has been detected using CppCheck (static analysis tool). Cc: stable@vger.kernel.org Signed-off-by: NItai Handler <itai_handler@hotmail.com> Signed-off-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com>
-
由 Sudip Mukherjee 提交于
We are allocating backing using psbfb_alloc() and so backing->stolen is always true. So we were freeing backing two times. Moreover if we follow the execution path then we should be freeing backing after we have released the helper. So remove the one which frees backing before the helper is released. While at it the error labels are also renamed to give a meaningful name. [Patrik: Fixed conflict with removal of struct_mutex] Signed-off-by: NSudip Mukherjee <sudip@vectorindia.org> Reviewed-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com>
-
- 05 4月, 2016 1 次提交
-
-
由 Linus Torvalds 提交于
In commit e4570897 ("drm/dp-helper: Move the legacy helpers to gma500") the legacy i2c helpers were moved to the only remaining user of them, the gma500 driver. Together with that move, i2c_dp_aux_add_bus() was marked deprecated and started warning about its remaining use. It's now been a year and a half of annoying warning, and apparently nobody cares enough about gma500 to try to move it along to the more modern models. Get rid of the warning - if even the gma500 people don't care enough, then they should certainly not spam other innocent developers with a warning that might hide other, much more real issues. Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Alan Cox <alan@linux.intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 05 3月, 2016 1 次提交
-
-
由 Carlos Palminha 提交于
This patch set nukes all the dummy crtc mode_fixup implementations. (made on top of Daniel topic/drm-misc branch) Signed-off-by: NCarlos Palminha <palminha@synopsys.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
- 16 2月, 2016 1 次提交
-
-
由 Carlos Palminha 提交于
mode_fixup function for encoder drivers became optional with patch http://patchwork.freedesktop.org/patch/msgid/1455106522-32307-1-git-send-email-palminha@synopsys.com This patch set nukes all the dummy mode_fixup implementations. (made on top of Daniel topic/drm-misc branch) Signed-off-by: NCarlos Palminha <palminha@synopsys.com> Reviewed-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/b704458dc68a73cfb5507933c1df0c2a79e186eb.1455540137.git.palminha@synopsys.com
-
- 10 2月, 2016 1 次提交
-
-
由 Rasmus Villemoes 提交于
The current code fails to call i2c_del_adapter on dev_prev->gmbus[0].adapter, and if the for loop above failed already at i==0, all hell breaks loose when we do the loop body for i = -1,-2,... Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk> Link: http://patchwork.freedesktop.org/patch/msgid/1455048677-19882-2-git-send-email-linux@rasmusvillemoes.dkReviewed-by: NAndy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
- 08 2月, 2016 2 次提交
-
-
由 Alan Cox 提交于
This is a left over from the great clean ups in the past. It's confusing as it returns an int, yet has one caller that never uses it. The caller already has all the right private variables local so the entire function can be replaced by a simple if call. Signed-off-by: NAlan Cox <alan@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20160129193731.8475.47809.stgit@localhost.localdomainAcked-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Sudip Mukherjee 提交于
We were getting build warning about: drivers/gpu/drm/gma500/mdfld_dsi_output.c:407:2: warning: initialization from incompatible pointer type The callback to dpms was pointing to a helper function which had a return type of void, whereas the callback should point to a function which has a return type of int. On closer look it turned out that we do not need the helper function since if we call drm_helper_connector_dpms() directly, the first check that drm_helper_connector_dpms() does is: if (mode == connector->dpms) Signed-off-by: NSudip Mukherjee <sudip@vectorindia.org> Link: http://patchwork.freedesktop.org/patch/msgid/1454393155-13142-1-git-send-email-sudipm.mukherjee@gmail.comAcked-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
-
- 26 1月, 2016 1 次提交
-
-
由 Daniel Vetter 提交于
I'm auditing them all, empty ones just confuse ... Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Acked-by: NDaniel Stone <daniels@collabora.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Link: http://patchwork.freedesktop.org/patch/msgid/1452548477-15905-9-git-send-email-daniel.vetter@ffwll.chAcked-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
-
- 16 1月, 2016 1 次提交
-
-
由 Dan Williams 提交于
Convert the raw unsigned long 'pfn' argument to pfn_t for the purpose of evaluating the PFN_MAP and PFN_DEV flags. When both are set it triggers _PAGE_DEVMAP to be set in the resulting pte. There are no functional changes to the gpu drivers as a result of this conversion. Signed-off-by: NDan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave@sr71.net> Cc: David Airlie <airlied@linux.ie> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 04 1月, 2016 1 次提交
-
-
由 Geliang Tang 提交于
Use to_pci_dev() instead of open-coding it. Signed-off-by: NGeliang Tang <geliangtang@163.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
- 15 12月, 2015 1 次提交
-
-
由 Thierry Reding 提交于
If the DSI output isn't connected, then mdfld_dsi_encoder_get_pipe() will return -1. The mdfld_dsi_dp_mode_set() function doesn't properly check for this condition and causes the following compiler warnings: CC drivers/gpu/drm/gma500/mdfld_dsi_dpi.o drivers/gpu/drm/gma500/mdfld_dsi_dpi.c: In function ‘mdfld_dsi_dpi_mode_set’: drivers/gpu/drm/gma500/mdfld_dsi_dpi.c:828:35: warning: array subscript is below array bounds [-Warray-bounds] u32 pipeconf = dev_priv->pipeconf[pipe]; ^ drivers/gpu/drm/gma500/mdfld_dsi_dpi.c:829:33: warning: array subscript is below array bounds [-Warray-bounds] u32 dspcntr = dev_priv->dspcntr[pipe]; ^ Fix this by checking for a valid pipe before indexing the pipeconf and dspcntr arrays. Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Reviewed-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by: NThierry Reding <treding@nvidia.com> Signed-off-by: NBoris Brezillon <boris.brezillon@free-electrons.com> Link: http://patchwork.freedesktop.org/patch/msgid/1450178476-26284-2-git-send-email-boris.brezillon@free-electrons.comSigned-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
- 11 12月, 2015 1 次提交
-
-
由 Ville Syrjälä 提交于
Done with coccinelle for the most part. However, it thinks '...' is part of the semantic patch, so I put an 'int DOTDOTDOT' placeholder in its place and got rid of it with sed afterwards. @@ identifier dev, encoder, funcs; @@ int drm_encoder_init(struct drm_device *dev, struct drm_encoder *encoder, const struct drm_encoder_funcs *funcs, int encoder_type + ,const char *name, int DOTDOTDOT ) { ... } @@ identifier dev, encoder, funcs; @@ int drm_encoder_init(struct drm_device *dev, struct drm_encoder *encoder, const struct drm_encoder_funcs *funcs, int encoder_type + ,const char *name, int DOTDOTDOT ); @@ expression E1, E2, E3, E4; @@ drm_encoder_init(E1, E2, E3, E4 + ,NULL ) v2: Add ', or NULL...' to @name kernel doc (Jani) Annotate the function with __printf() attribute (Jani) Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1449670818-2966-1-git-send-email-ville.syrjala@linux.intel.com
-
- 08 12月, 2015 1 次提交
-
-
由 Daniel Vetter 提交于
I want to remove the core ones since with atomic drivers system suspend/resume is solved much differently. And there's only 2 drivers (nouveau besides gma500) really using them. v2: Fixup build noise 0day reported. Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1449218769-16577-13-git-send-email-daniel.vetter@ffwll.ch Reviewed-by: Thierry Reding <treding@nvidia.com> (v1)
-
- 01 12月, 2015 5 次提交
-
-
由 Daniel Vetter 提交于
There's currently two places where the gma500 fault handler relies upon dev->struct_mutex: - To protect r->mappping - To make sure vm_insert_pfn isn't called concurrently (in which case the 2nd thread would get an error code). Everything else (specifically psb_gtt_pin) is already protected by some other locks. Hence just create a new driver-private mmap_mutex just for this function. With this gma500 is complete dev->struct_mutex free! Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Acked-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1448271183-20523-21-git-send-email-daniel.vetter@ffwll.ch
-
由 Daniel Vetter 提交于
Simply forgotten about this when I was doing my general cleansing of simple gem mmap offset functions. There's nothing but core functions called here, and they all have their own protection already. Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Acked-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1448271183-20523-20-git-send-email-daniel.vetter@ffwll.ch
-
由 Daniel Vetter 提交于
This is init/teardown code, locking is just to appease locking checks. And since gem create/free doesn't need this any more there's really no reason for grabbing dev->struct_mutex. Again important to switch obj_unref to _unlocked variants. Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Acked-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1448271183-20523-19-git-send-email-daniel.vetter@ffwll.ch
-
由 Daniel Vetter 提交于
It's either init code or already protected by other means. Note that psb_gtt_pin/unpin has it's own lock, and that's really the only piece of driver private state - all the modeset state is protected with modeset locks already. The only important bit is to switch all gem_obj_unref calls to the _unlocked variant. Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Acked-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1448271183-20523-18-git-send-email-daniel.vetter@ffwll.ch
-
由 Daniel Vetter 提交于
This is called without dev->struct_mutex held, we need to use the _unlocked variant. Never caught in the wild since you'd need an evil userspace which races a gem_close ioctl call with the in-progress open. Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Acked-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1448271183-20523-17-git-send-email-daniel.vetter@ffwll.ch
-
- 24 11月, 2015 1 次提交
-
-
由 Ville Syrjälä 提交于
Drivers shouldn't clobber the passed in addfb ioctl parameters. i915 was doing just that. To prevent it from happening again, pass the struct around as const, starting all the way from internal_framebuffer_create(). Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
- 06 10月, 2015 1 次提交
-
-
由 Thierry Reding 提交于
This continues the pattern started in commit cc1ef118 ("drm/irq: Make pipe unsigned and name consistent"). This is applied to the public APIs and driver callbacks, so pretty much all drivers need to be updated to match the new prototypes. Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Inki Dae <inki.dae@samsung.com> Cc: Jianwei Wang <jianwei.wang.chn@gmail.com> Cc: Alison Wang <alison.wang@freescale.com> Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: David Airlie <airlied@linux.ie> Cc: Rob Clark <robdclark@gmail.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Mark Yao <mark.yao@rock-chips.com> Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Vincent Abriou <vincent.abriou@st.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: NThierry Reding <treding@nvidia.com> Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
- 25 9月, 2015 1 次提交
-
-
由 Thierry Reding 提交于
The DRM/DP helpers already contain a definition for this macro. Remove the duplicate in the GMA500 driver to avoid having to keep both updated synchronously. Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by: NThierry Reding <treding@nvidia.com> Reviewed-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
- 06 8月, 2015 1 次提交
-
-
由 Archit Taneja 提交于
Use the newly created wrapper drm_fb_helper functions instead of calling core fbdev functions directly. They also simplify the fb_info creation. v2: - removed unused variable 'device' in psbfb_create Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: NArchit Taneja <architt@codeaurora.org> Reviewed-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
- 07 4月, 2015 1 次提交
-
-
由 Jani Nikula 提交于
They are not to be modified. Generated using the semantic patch: @@ @@ ( const struct drm_crtc_helper_funcs * | - struct drm_crtc_helper_funcs * + const struct drm_crtc_helper_funcs * ) @@ @@ ( const struct drm_encoder_helper_funcs * | - struct drm_encoder_helper_funcs * + const struct drm_encoder_helper_funcs * ) @@ @@ ( const struct drm_connector_helper_funcs * | - struct drm_connector_helper_funcs * + const struct drm_connector_helper_funcs * ) @@ @@ ( const struct drm_plane_helper_funcs * | - struct drm_plane_helper_funcs * + const struct drm_plane_helper_funcs * ) Signed-off-by: NJani Nikula <jani.nikula@intel.com> Reviewed-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-