Privileged syslog operations currently require CAP_SYS_ADMIN.  Split
this off into a new CAP_SYSLOG privilege which we can sanely take away
from a container through the capability bounding set.

With this patch, an lxc container can be prevented from messing with
the host's syslog (i.e. dmesg -c).

Changelog: mar 12 2010: add selinux capability2:cap_syslog perm
Changelog: nov 22 2010:
	. port to new kernel
	. add a WARN_ONCE if userspace isn't using CAP_SYSLOG
Signed-off-by: NSerge Hallyn <serge.hallyn@ubuntu.com>
Acked-by: NAndrew G. Morgan <morgan@kernel.org>
Acked-By: NKees Cook <kees.cook@canonical.com>
Cc: James Morris <jmorris@namei.org>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Cc: "Christopher J. PeBenito" <cpebenito@tresys.com>
Cc: Eric Paris <eparis@parisplace.org>
Signed-off-by: NJames Morris <jmorris@namei.org>

Make the security extended attributes names global. Updated to move
the remaining Smack xattrs.
Signed-off-by: NMimi Zohar <zohar@us.ibm.com>
Acked-by: NSerge Hallyn <serue@us.ibm.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

As far as I know, all distros currently ship kernels with default
CONFIG_SECURITY_FILE_CAPABILITIES=y.  Since having the option on
leaves a 'no_file_caps' option to boot without file capabilities,
the main reason to keep the option is that turning it off saves
you (on my s390x partition) 5k.  In particular, vmlinux sizes
came to:

without patch fscaps=n:		 	53598392
without patch fscaps=y:		 	53603406
with this patch applied:		53603342

with the security-next tree.

Against this we must weigh the fact that there is no simple way for
userspace to figure out whether file capabilities are supported,
while things like per-process securebits, capability bounding
sets, and adding bits to pI if CAP_SETPCAP is in pE are not supported
with SECURITY_FILE_CAPABILITIES=n, leaving a bit of a problem for
applications wanting to know whether they can use them and/or why
something failed.

It also adds another subtly different set of semantics which we must
maintain at the risk of severe security regressions.

So this patch removes the SECURITY_FILE_CAPABILITIES compile
option.  It drops the kernel size by about 50k over the stock
SECURITY_FILE_CAPABILITIES=y kernel, by removing the
cap_limit_ptraced_target() function.

Changelog:
	Nov 20: remove cap_limit_ptraced_target() as it's logic
		was ifndef'ed.
Signed-off-by: NSerge E. Hallyn <serue@us.ibm.com>
Acked-by: NAndrew G. Morgan" <morgan@kernel.org>
Signed-off-by: NJames Morris <jmorris@namei.org>

This is patch to change ftp site of the libcap source.
"ftp://linux.kernel.org" address does not exist.
Signed-off-by: NGeunSik Lim <geunsik.lim@samsung.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

When POSIX capabilities were introduced during the 2.1 Linux
cycle, the fs mask, which represents the capabilities which having
fsuid==0 is supposed to grant, did not include CAP_MKNOD and
CAP_LINUX_IMMUTABLE.  However, before capabilities the privilege
to call these did in fact depend upon fsuid==0.

This patch introduces those capabilities into the fsmask,
restoring the old behavior.

See the thread starting at http://lkml.org/lkml/2009/3/11/157 for
reference.

Note that if this fix is deemed valid, then earlier kernel versions (2.4
and 2.2) ought to be fixed too.

Changelog:
	[Mar 23] Actually delete old CAP_FS_SET definition...
	[Mar 20] Updated against J. Bruce Fields's patch
Reported-by: NIgor Zhbanov <izh1979@gmail.com>
Signed-off-by: NSerge E. Hallyn <serue@us.ibm.com>
Cc: stable@kernel.org
Cc: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Since creating a device node is normally an operation requiring special
privilege, Igor Zhbanov points out that it is surprising (to say the
least) that a client can, for example, create a device node on a
filesystem exported with root_squash.

So, make sure CAP_MKNOD is among the capabilities dropped when an nfsd
thread handles a request from a non-root user.
Reported-by: NIgor Zhbanov <izh1979@gmail.com>
Cc: stable@kernel.org
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

fix the following 'make headers_check' warning:

  usr/include/linux/capability.h:73: extern's make no sense in userspace
Signed-off-by: NJaswinder Singh Rajput <jaswinderrajput@gmail.com>

Fix a regression in cap_capable() due to:

	commit 3b11a1de
	Author: David Howells <dhowells@redhat.com>
	Date:   Fri Nov 14 10:39:26 2008 +1100

	    CRED: Differentiate objective and effective subjective credentials on a task

The problem is that the above patch allows a process to have two sets of
credentials, and for the most part uses the subjective credentials when
accessing current's creds.

There is, however, one exception: cap_capable(), and thus capable(), uses the
real/objective credentials of the target task, whether or not it is the current
task.

Ordinarily this doesn't matter, since usually the two cred pointers in current
point to the same set of creds.  However, sys_faccessat() makes use of this
facility to override the credentials of the calling process to make its test,
without affecting the creds as seen from other processes.

One of the things sys_faccessat() does is to make an adjustment to the
effective capabilities mask, which cap_capable(), as it stands, then ignores.

The affected capability check is in generic_permission():

	if (!(mask & MAY_EXEC) || execute_ok(inode))
		if (capable(CAP_DAC_OVERRIDE))
			return 0;

This change passes the set of credentials to be tested down into the commoncap
and SELinux code.  The security functions called by capable() and
has_capability() select the appropriate set of credentials from the process
being checked.

This can be tested by compiling the following program from the XFS testsuite:

/*
 *  t_access_root.c - trivial test program to show permission bug.
 *
 *  Written by Michael Kerrisk - copyright ownership not pursued.
 *  Sourced from: http://linux.derkeiler.com/Mailing-Lists/Kernel/2003-10/6030.html
 */
#include <limits.h>
#include <unistd.h>
#include <stdio.h>
#include <stdlib.h>
#include <fcntl.h>
#include <sys/stat.h>

#define UID 500
#define GID 100
#define PERM 0
#define TESTPATH "/tmp/t_access"

static void
errExit(char *msg)
{
    perror(msg);
    exit(EXIT_FAILURE);
} /* errExit */

static void
accessTest(char *file, int mask, char *mstr)
{
    printf("access(%s, %s) returns %d\n", file, mstr, access(file, mask));
} /* accessTest */

int
main(int argc, char *argv[])
{
    int fd, perm, uid, gid;
    char *testpath;
    char cmd[PATH_MAX + 20];

    testpath = (argc > 1) ? argv[1] : TESTPATH;
    perm = (argc > 2) ? strtoul(argv[2], NULL, 8) : PERM;
    uid = (argc > 3) ? atoi(argv[3]) : UID;
    gid = (argc > 4) ? atoi(argv[4]) : GID;

    unlink(testpath);

    fd = open(testpath, O_RDWR | O_CREAT, 0);
    if (fd == -1) errExit("open");

    if (fchown(fd, uid, gid) == -1) errExit("fchown");
    if (fchmod(fd, perm) == -1) errExit("fchmod");
    close(fd);

    snprintf(cmd, sizeof(cmd), "ls -l %s", testpath);
    system(cmd);

    if (seteuid(uid) == -1) errExit("seteuid");

    accessTest(testpath, 0, "0");
    accessTest(testpath, R_OK, "R_OK");
    accessTest(testpath, W_OK, "W_OK");
    accessTest(testpath, X_OK, "X_OK");
    accessTest(testpath, R_OK | W_OK, "R_OK | W_OK");
    accessTest(testpath, R_OK | X_OK, "R_OK | X_OK");
    accessTest(testpath, W_OK | X_OK, "W_OK | X_OK");
    accessTest(testpath, R_OK | W_OK | X_OK, "R_OK | W_OK | X_OK");

    exit(EXIT_SUCCESS);
} /* main */

This can be run against an Ext3 filesystem as well as against an XFS
filesystem.  If successful, it will show:

	[root@andromeda src]# ./t_access_root /tmp/xxx 0 4043 4043
	---------- 1 dhowells dhowells 0 2008-12-31 03:00 /tmp/xxx
	access(/tmp/xxx, 0) returns 0
	access(/tmp/xxx, R_OK) returns 0
	access(/tmp/xxx, W_OK) returns 0
	access(/tmp/xxx, X_OK) returns -1
	access(/tmp/xxx, R_OK | W_OK) returns 0
	access(/tmp/xxx, R_OK | X_OK) returns -1
	access(/tmp/xxx, W_OK | X_OK) returns -1
	access(/tmp/xxx, R_OK | W_OK | X_OK) returns -1

If unsuccessful, it will show:

	[root@andromeda src]# ./t_access_root /tmp/xxx 0 4043 4043
	---------- 1 dhowells dhowells 0 2008-12-31 02:56 /tmp/xxx
	access(/tmp/xxx, 0) returns 0
	access(/tmp/xxx, R_OK) returns -1
	access(/tmp/xxx, W_OK) returns -1
	access(/tmp/xxx, X_OK) returns -1
	access(/tmp/xxx, R_OK | W_OK) returns -1
	access(/tmp/xxx, R_OK | X_OK) returns -1
	access(/tmp/xxx, W_OK | X_OK) returns -1
	access(/tmp/xxx, R_OK | W_OK | X_OK) returns -1

I've also tested the fix with the SELinux and syscalls LTP testsuites.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Tested-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Acked-by: NSerge Hallyn <serue@us.ibm.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

This reverts commit 14eaddc9.

David has a better version to come.

Fix a regression in cap_capable() due to:

	commit 5ff7711e635b32f0a1e558227d030c7e45b4a465
	Author: David Howells <dhowells@redhat.com>
	Date:   Wed Dec 31 02:52:28 2008 +0000

	    CRED: Differentiate objective and effective subjective credentials on a task

The problem is that the above patch allows a process to have two sets of
credentials, and for the most part uses the subjective credentials when
accessing current's creds.

There is, however, one exception: cap_capable(), and thus capable(), uses the
real/objective credentials of the target task, whether or not it is the current
task.

Ordinarily this doesn't matter, since usually the two cred pointers in current
point to the same set of creds.  However, sys_faccessat() makes use of this
facility to override the credentials of the calling process to make its test,
without affecting the creds as seen from other processes.

One of the things sys_faccessat() does is to make an adjustment to the
effective capabilities mask, which cap_capable(), as it stands, then ignores.

The affected capability check is in generic_permission():

	if (!(mask & MAY_EXEC) || execute_ok(inode))
		if (capable(CAP_DAC_OVERRIDE))
			return 0;

This change splits capable() from has_capability() down into the commoncap and
SELinux code.  The capable() security op now only deals with the current
process, and uses the current process's subjective creds.  A new security op -
task_capable() - is introduced that can check any task's objective creds.

strictly the capable() security op is superfluous with the presence of the
task_capable() op, however it should be faster to call the capable() op since
two fewer arguments need be passed down through the various layers.

This can be tested by compiling the following program from the XFS testsuite:

/*
 *  t_access_root.c - trivial test program to show permission bug.
 *
 *  Written by Michael Kerrisk - copyright ownership not pursued.
 *  Sourced from: http://linux.derkeiler.com/Mailing-Lists/Kernel/2003-10/6030.html
 */
#include <limits.h>
#include <unistd.h>
#include <stdio.h>
#include <stdlib.h>
#include <fcntl.h>
#include <sys/stat.h>

#define UID 500
#define GID 100
#define PERM 0
#define TESTPATH "/tmp/t_access"

static void
errExit(char *msg)
{
    perror(msg);
    exit(EXIT_FAILURE);
} /* errExit */

static void
accessTest(char *file, int mask, char *mstr)
{
    printf("access(%s, %s) returns %d\n", file, mstr, access(file, mask));
} /* accessTest */

int
main(int argc, char *argv[])
{
    int fd, perm, uid, gid;
    char *testpath;
    char cmd[PATH_MAX + 20];

    testpath = (argc > 1) ? argv[1] : TESTPATH;
    perm = (argc > 2) ? strtoul(argv[2], NULL, 8) : PERM;
    uid = (argc > 3) ? atoi(argv[3]) : UID;
    gid = (argc > 4) ? atoi(argv[4]) : GID;

    unlink(testpath);

    fd = open(testpath, O_RDWR | O_CREAT, 0);
    if (fd == -1) errExit("open");

    if (fchown(fd, uid, gid) == -1) errExit("fchown");
    if (fchmod(fd, perm) == -1) errExit("fchmod");
    close(fd);

    snprintf(cmd, sizeof(cmd), "ls -l %s", testpath);
    system(cmd);

    if (seteuid(uid) == -1) errExit("seteuid");

    accessTest(testpath, 0, "0");
    accessTest(testpath, R_OK, "R_OK");
    accessTest(testpath, W_OK, "W_OK");
    accessTest(testpath, X_OK, "X_OK");
    accessTest(testpath, R_OK | W_OK, "R_OK | W_OK");
    accessTest(testpath, R_OK | X_OK, "R_OK | X_OK");
    accessTest(testpath, W_OK | X_OK, "W_OK | X_OK");
    accessTest(testpath, R_OK | W_OK | X_OK, "R_OK | W_OK | X_OK");

    exit(EXIT_SUCCESS);
} /* main */

This can be run against an Ext3 filesystem as well as against an XFS
filesystem.  If successful, it will show:

	[root@andromeda src]# ./t_access_root /tmp/xxx 0 4043 4043
	---------- 1 dhowells dhowells 0 2008-12-31 03:00 /tmp/xxx
	access(/tmp/xxx, 0) returns 0
	access(/tmp/xxx, R_OK) returns 0
	access(/tmp/xxx, W_OK) returns 0
	access(/tmp/xxx, X_OK) returns -1
	access(/tmp/xxx, R_OK | W_OK) returns 0
	access(/tmp/xxx, R_OK | X_OK) returns -1
	access(/tmp/xxx, W_OK | X_OK) returns -1
	access(/tmp/xxx, R_OK | W_OK | X_OK) returns -1

If unsuccessful, it will show:

	[root@andromeda src]# ./t_access_root /tmp/xxx 0 4043 4043
	---------- 1 dhowells dhowells 0 2008-12-31 02:56 /tmp/xxx
	access(/tmp/xxx, 0) returns 0
	access(/tmp/xxx, R_OK) returns -1
	access(/tmp/xxx, W_OK) returns -1
	access(/tmp/xxx, X_OK) returns -1
	access(/tmp/xxx, R_OK | W_OK) returns -1
	access(/tmp/xxx, R_OK | X_OK) returns -1
	access(/tmp/xxx, W_OK | X_OK) returns -1
	access(/tmp/xxx, R_OK | W_OK | X_OK) returns -1

I've also tested the fix with the SELinux and syscalls LTP testsuites.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

Inaugurate copy-on-write credentials management.  This uses RCU to manage the
credentials pointer in the task_struct with respect to accesses by other tasks.
A process may only modify its own credentials, and so does not need locking to
access or modify its own credentials.

A mutex (cred_replace_mutex) is added to the task_struct to control the effect
of PTRACE_ATTACHED on credential calculations, particularly with respect to
execve().

With this patch, the contents of an active credentials struct may not be
changed directly; rather a new set of credentials must be prepared, modified
and committed using something like the following sequence of events:

	struct cred *new = prepare_creds();
	int ret = blah(new);
	if (ret < 0) {
		abort_creds(new);
		return ret;
	}
	return commit_creds(new);

There are some exceptions to this rule: the keyrings pointed to by the active
credentials may be instantiated - keyrings violate the COW rule as managing
COW keyrings is tricky, given that it is possible for a task to directly alter
the keys in a keyring in use by another task.

To help enforce this, various pointers to sets of credentials, such as those in
the task_struct, are declared const.  The purpose of this is compile-time
discouragement of altering credentials through those pointers.  Once a set of
credentials has been made public through one of these pointers, it may not be
modified, except under special circumstances:

  (1) Its reference count may incremented and decremented.

  (2) The keyrings to which it points may be modified, but not replaced.

The only safe way to modify anything else is to create a replacement and commit
using the functions described in Documentation/credentials.txt (which will be
added by a later patch).

This patch and the preceding patches have been tested with the LTP SELinux
testsuite.

This patch makes several logical sets of alteration:

 (1) execve().

     This now prepares and commits credentials in various places in the
     security code rather than altering the current creds directly.

 (2) Temporary credential overrides.

     do_coredump() and sys_faccessat() now prepare their own credentials and
     temporarily override the ones currently on the acting thread, whilst
     preventing interference from other threads by holding cred_replace_mutex
     on the thread being dumped.

     This will be replaced in a future patch by something that hands down the
     credentials directly to the functions being called, rather than altering
     the task's objective credentials.

 (3) LSM interface.

     A number of functions have been changed, added or removed:

     (*) security_capset_check(), ->capset_check()
     (*) security_capset_set(), ->capset_set()

     	 Removed in favour of security_capset().

     (*) security_capset(), ->capset()

     	 New.  This is passed a pointer to the new creds, a pointer to the old
     	 creds and the proposed capability sets.  It should fill in the new
     	 creds or return an error.  All pointers, barring the pointer to the
     	 new creds, are now const.

     (*) security_bprm_apply_creds(), ->bprm_apply_creds()

     	 Changed; now returns a value, which will cause the process to be
     	 killed if it's an error.

     (*) security_task_alloc(), ->task_alloc_security()

     	 Removed in favour of security_prepare_creds().

     (*) security_cred_free(), ->cred_free()

     	 New.  Free security data attached to cred->security.

     (*) security_prepare_creds(), ->cred_prepare()

     	 New. Duplicate any security data attached to cred->security.

     (*) security_commit_creds(), ->cred_commit()

     	 New. Apply any security effects for the upcoming installation of new
     	 security by commit_creds().

     (*) security_task_post_setuid(), ->task_post_setuid()

     	 Removed in favour of security_task_fix_setuid().

     (*) security_task_fix_setuid(), ->task_fix_setuid()

     	 Fix up the proposed new credentials for setuid().  This is used by
     	 cap_set_fix_setuid() to implicitly adjust capabilities in line with
     	 setuid() changes.  Changes are made to the new credentials, rather
     	 than the task itself as in security_task_post_setuid().

     (*) security_task_reparent_to_init(), ->task_reparent_to_init()

     	 Removed.  Instead the task being reparented to init is referred
     	 directly to init's credentials.

	 NOTE!  This results in the loss of some state: SELinux's osid no
	 longer records the sid of the thread that forked it.

     (*) security_key_alloc(), ->key_alloc()
     (*) security_key_permission(), ->key_permission()

     	 Changed.  These now take cred pointers rather than task pointers to
     	 refer to the security context.

 (4) sys_capset().

     This has been simplified and uses less locking.  The LSM functions it
     calls have been merged.

 (5) reparent_to_kthreadd().

     This gives the current thread the same credentials as init by simply using
     commit_thread() to point that way.

 (6) __sigqueue_alloc() and switch_uid()

     __sigqueue_alloc() can't stop the target task from changing its creds
     beneath it, so this function gets a reference to the currently applicable
     user_struct which it then passes into the sigqueue struct it returns if
     successful.

     switch_uid() is now called from commit_creds(), and possibly should be
     folded into that.  commit_creds() should take care of protecting
     __sigqueue_alloc().

 (7) [sg]et[ug]id() and co and [sg]et_current_groups.

     The set functions now all use prepare_creds(), commit_creds() and
     abort_creds() to build and check a new set of credentials before applying
     it.

     security_task_set[ug]id() is called inside the prepared section.  This
     guarantees that nothing else will affect the creds until we've finished.

     The calling of set_dumpable() has been moved into commit_creds().

     Much of the functionality of set_user() has been moved into
     commit_creds().

     The get functions all simply access the data directly.

 (8) security_task_prctl() and cap_task_prctl().

     security_task_prctl() has been modified to return -ENOSYS if it doesn't
     want to handle a function, or otherwise return the return value directly
     rather than through an argument.

     Additionally, cap_task_prctl() now prepares a new set of credentials, even
     if it doesn't end up using it.

 (9) Keyrings.

     A number of changes have been made to the keyrings code:

     (a) switch_uid_keyring(), copy_keys(), exit_keys() and suid_keys() have
     	 all been dropped and built in to the credentials functions directly.
     	 They may want separating out again later.

     (b) key_alloc() and search_process_keyrings() now take a cred pointer
     	 rather than a task pointer to specify the security context.

     (c) copy_creds() gives a new thread within the same thread group a new
     	 thread keyring if its parent had one, otherwise it discards the thread
     	 keyring.

     (d) The authorisation key now points directly to the credentials to extend
     	 the search into rather pointing to the task that carries them.

     (e) Installing thread, process or session keyrings causes a new set of
     	 credentials to be created, even though it's not strictly necessary for
     	 process or session keyrings (they're shared).

(10) Usermode helper.

     The usermode helper code now carries a cred struct pointer in its
     subprocess_info struct instead of a new session keyring pointer.  This set
     of credentials is derived from init_cred and installed on the new process
     after it has been cloned.

     call_usermodehelper_setup() allocates the new credentials and
     call_usermodehelper_freeinfo() discards them if they haven't been used.  A
     special cred function (prepare_usermodeinfo_creds()) is provided
     specifically for call_usermodehelper_setup() to call.

     call_usermodehelper_setkeys() adjusts the credentials to sport the
     supplied keyring as the new session keyring.

(11) SELinux.

     SELinux has a number of changes, in addition to those to support the LSM
     interface changes mentioned above:

     (a) selinux_setprocattr() no longer does its check for whether the
     	 current ptracer can access processes with the new SID inside the lock
     	 that covers getting the ptracer's SID.  Whilst this lock ensures that
     	 the check is done with the ptracer pinned, the result is only valid
     	 until the lock is released, so there's no point doing it inside the
     	 lock.

(12) is_single_threaded().

     This function has been extracted from selinux_setprocattr() and put into
     a file of its own in the lib/ directory as join_session_keyring() now
     wants to use it too.

     The code in SELinux just checked to see whether a task shared mm_structs
     with other tasks (CLONE_VM), but that isn't good enough.  We really want
     to know if they're part of the same thread group (CLONE_THREAD).

(13) nfsd.

     The NFS server daemon now has to use the COW credentials to set the
     credentials it is going to use.  It really needs to pass the credentials
     down to the functions it calls, but it can't do that until other patches
     in this series have been applied.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NJames Morris <jmorris@namei.org>
Signed-off-by: NJames Morris <jmorris@namei.org>

Remove broken declarations for security_capable* functions,
which were not needed anyway.
Signed-off-by: NJames Morris <jmorris@namei.org>

make an A or B type decision instead of a security decision.  Currently
this is the case at least for filesystems when deciding if a process can use
the reserved 'root' blocks and for the case of things like the oom
algorithm determining if processes are root processes and should be less
likely to be killed.  These types of security system requests should not be
audited or logged since they are not really security decisions.  It would be
possible to solve this problem like the vm_enough_memory security check did
by creating a new LSM interface and moving all of the policy into that
interface but proves the needlessly bloat the LSM and provide complex
indirection.

This merely allows those decisions to be made where they belong and to not
flood logs or printk with denials for thing that are not security decisions.
Signed-off-by: NEric Paris <eparis@redhat.com>
Acked-by: NStephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: NJames Morris <jmorris@namei.org>

records of any file that has file capabilities set.  Files which do not
have fcaps set will not have different PATH records.

An example audit record if you run:
setcap "cap_net_admin+pie" /bin/bash
/bin/bash

type=SYSCALL msg=audit(1225741937.363:230): arch=c000003e syscall=59 success=yes exit=0 a0=2119230 a1=210da30 a2=20ee290 a3=8 items=2 ppid=2149 pid=2923 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=pts0 ses=3 comm="ping" exe="/bin/ping" subj=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023 key=(null)
type=EXECVE msg=audit(1225741937.363:230): argc=2 a0="ping" a1="www.google.com"
type=CWD msg=audit(1225741937.363:230):  cwd="/root"
type=PATH msg=audit(1225741937.363:230): item=0 name="/bin/ping" inode=49256 dev=fd:00 mode=0104755 ouid=0 ogid=0 rdev=00:00 obj=system_u:object_r:ping_exec_t:s0 cap_fp=0000000000002000 cap_fi=0000000000002000 cap_fe=1 cap_fver=2
type=PATH msg=audit(1225741937.363:230): item=1 name=(null) inode=507915 dev=fd:00 mode=0100755 ouid=0 ogid=0 rdev=00:00 obj=system_u:object_r:ld_so_t:s0
Signed-off-by: NEric Paris <eparis@redhat.com>
Acked-by: NSerge Hallyn <serue@us.ibm.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

functions which retrieve fcaps information from disk.  This information is
necessary so fcaps information can be collected and recorded by the audit
system.
Signed-off-by: NEric Paris <eparis@redhat.com>
Acked-by: NSerge Hallyn <serue@us.ibm.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

which order the argument should be in.  So give an example.
Signed-off-by: NEric Paris <eparis@redhat.com>
Acked-by: NSerge Hallyn <serue@us.ibm.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

Add a no_file_caps boot option when file capabilities are
compiled into the kernel (CONFIG_SECURITY_FILE_CAPABILITIES=y).

This allows distributions to ship a kernel with file capabilities
compiled in, without forcing users to use (and understand and
trust) them.

When no_file_caps is specified at boot, then when a process executes
a file, any file capabilities stored with that file will not be
used in the calculation of the process' new capability sets.

This means that booting with the no_file_caps boot option will
not be the same as booting a kernel with file capabilities
compiled out - in particular a task with  CAP_SETPCAP will not
have any chance of passing capabilities to another task (which
isn't "really" possible anyway, and which may soon by killed
altogether by David Howells in any case), and it will instead
be able to put new capabilities in its pI.  However since fI
will always be empty and pI is masked with fI, it gains the
task nothing.

We also support the extra prctl options, setting securebits and
dropping capabilities from the per-process bounding set.

The other remaining difference is that killpriv, task_setscheduler,
setioprio, and setnice will continue to be hooked.  That will
be noticable in the case where a root task changed its uid
while keeping some caps, and another task owned by the new uid
tries to change settings for the more privileged task.

Changelog:
	Nov 05 2008: (v4) trivial port on top of always-start-\
		with-clear-caps patch
	Sep 23 2008: nixed file_caps_enabled when file caps are
		not compiled in as it isn't used.
		Document no_file_caps in kernel-parameters.txt.
Signed-off-by: NSerge Hallyn <serue@us.ibm.com>
Acked-by: NAndrew G. Morgan <morgan@kernel.org>
Signed-off-by: NJames Morris <jmorris@namei.org>

Fix the setting of PF_SUPERPRIV by __capable() as it could corrupt the flags
the target process if that is not the current process and it is trying to
change its own flags in a different way at the same time.

__capable() is using neither atomic ops nor locking to protect t->flags.  This
patch removes __capable() and introduces has_capability() that doesn't set
PF_SUPERPRIV on the process being queried.

This patch further splits security_ptrace() in two:

 (1) security_ptrace_may_access().  This passes judgement on whether one
     process may access another only (PTRACE_MODE_ATTACH for ptrace() and
     PTRACE_MODE_READ for /proc), and takes a pointer to the child process.
     current is the parent.

 (2) security_ptrace_traceme().  This passes judgement on PTRACE_TRACEME only,
     and takes only a pointer to the parent process.  current is the child.

     In Smack and commoncap, this uses has_capability() to determine whether
     the parent will be permitted to use PTRACE_ATTACH if normal checks fail.
     This does not set PF_SUPERPRIV.

Two of the instances of __capable() actually only act on current, and so have
been changed to calls to capable().

Of the places that were using __capable():

 (1) The OOM killer calls __capable() thrice when weighing the killability of a
     process.  All of these now use has_capability().

 (2) cap_ptrace() and smack_ptrace() were using __capable() to check to see
     whether the parent was allowed to trace any process.  As mentioned above,
     these have been split.  For PTRACE_ATTACH and /proc, capable() is now
     used, and for PTRACE_TRACEME, has_capability() is used.

 (3) cap_safe_nice() only ever saw current, so now uses capable().

 (4) smack_setprocattr() rejected accesses to tasks other than current just
     after calling __capable(), so the order of these two tests have been
     switched and capable() is used instead.

 (5) In smack_file_send_sigiotask(), we need to allow privileged processes to
     receive SIGIO on files they're manipulating.

 (6) In smack_task_wait(), we let a process wait for a privileged process,
     whether or not the process doing the waiting is privileged.

I've tested this with the LTP SELinux and syscalls testscripts.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NSerge Hallyn <serue@us.ibm.com>
Acked-by: NCasey Schaufler <casey@schaufler-ca.com>
Acked-by: NAndrew G. Morgan <morgan@kernel.org>
Acked-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NJames Morris <jmorris@namei.org>

This commit includes a bugfix for the fragile setuid fixup code in the
case that filesystem capabilities are supported (in access()).  The effect
of this fix is gated on filesystem capability support because changing
securebits is only supported when filesystem capabilities support is
configured.)

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: NAndrew G. Morgan <morgan@kernel.org>
Acked-by: NSerge Hallyn <serue@us.ibm.com>
Acked-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Source code out there hard-codes a notion of what the
_LINUX_CAPABILITY_VERSION #define means in terms of the semantics of the
raw capability system calls capget() and capset().  Its unfortunate, but
true.

Since the confusing header file has been in a released kernel, there is
software that is erroneously using 64-bit capabilities with the semantics
of 32-bit compatibilities.  These recently compiled programs may suffer
corruption of their memory when sys_getcap() overwrites more memory than
they are coded to expect, and the raising of added capabilities when using
sys_capset().

As such, this patch does a number of things to clean up the situation
for all. It

  1. forces the _LINUX_CAPABILITY_VERSION define to always retain its
     legacy value.

  2. adopts a new #define strategy for the kernel's internal
     implementation of the preferred magic.

  3. deprecates v2 capability magic in favor of a new (v3) magic
     number. The functionality of v3 is entirely equivalent to v2,
     the only difference being that the v2 magic causes the kernel
     to log a "deprecated" warning so the admin can find applications
     that may be using v2 inappropriately.

[User space code continues to be encouraged to use the libcap API which
protects the application from details like this.  libcap-2.10 is the first
to support v3 capabilities.]

Fixes issue reported in https://bugzilla.redhat.com/show_bug.cgi?id=447518.
Thanks to Bojan Smojver for the report.

[akpm@linux-foundation.org: s/depreciate/deprecate/g]
[akpm@linux-foundation.org: be robust about put_user size]
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: NAndrew G. Morgan <morgan@kernel.org>
Cc: Serge E. Hallyn <serue@us.ibm.com>
Cc: Bojan Smojver <bojan@rexursive.com>
Cc: stable@kernel.org
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NChris Wright <chrisw@sous-sol.org>

Cast the CAP_*_SET macros to be of kernel_cap_t type to avoid compiler
warnings.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

Cast the CAP_*_SET macros to be of kernel_cap_t type to avoid compiler
warnings.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Filesystem capability support makes it possible to do away with (set)uid-0
based privilege and use capabilities instead.  That is, with filesystem
support for capabilities but without this present patch, it is (conceptually)
possible to manage a system with capabilities alone and never need to obtain
privilege via (set)uid-0.

Of course, conceptually isn't quite the same as currently possible since few
user applications, certainly not enough to run a viable system, are currently
prepared to leverage capabilities to exercise privilege.  Further, many
applications exist that may never get upgraded in this way, and the kernel
will continue to want to support their setuid-0 base privilege needs.

Where pure-capability applications evolve and replace setuid-0 binaries, it is
desirable that there be a mechanisms by which they can contain their
privilege.  In addition to leveraging the per-process bounding and inheritable
sets, this should include suppressing the privilege of the uid-0 superuser
from the process' tree of children.

The feature added by this patch can be leveraged to suppress the privilege
associated with (set)uid-0.  This suppression requires CAP_SETPCAP to
initiate, and only immediately affects the 'current' process (it is inherited
through fork()/exec()).  This reimplementation differs significantly from the
historical support for securebits which was system-wide, unwieldy and which
has ultimately withered to a dead relic in the source of the modern kernel.

With this patch applied a process, that is capable(CAP_SETPCAP), can now drop
all legacy privilege (through uid=0) for itself and all subsequently
fork()'d/exec()'d children with:

  prctl(PR_SET_SECUREBITS, 0x2f);

This patch represents a no-op unless CONFIG_SECURITY_FILE_CAPABILITIES is
enabled at configure time.

[akpm@linux-foundation.org: fix uninitialised var warning]
[serue@us.ibm.com: capabilities: use cap_task_prctl when !CONFIG_SECURITY]
Signed-off-by: NAndrew G. Morgan <morgan@kernel.org>
Acked-by: NSerge Hallyn <serue@us.ibm.com>
Reviewed-by: NJames Morris <jmorris@namei.org>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Cc: Paul Moore <paul.moore@hp.com>
Signed-off-by: NSerge E. Hallyn <serue@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Smack is the Simplified Mandatory Access Control Kernel.

Smack implements mandatory access control (MAC) using labels
attached to tasks and data containers, including files, SVIPC,
and other tasks. Smack is a kernel based scheme that requires
an absolute minimum of application support and a very small
amount of configuration data.

Smack uses extended attributes and
provides a set of general mount options, borrowing technics used
elsewhere. Smack uses netlabel for CIPSO labeling. Smack provides
a pseudo-filesystem smackfs that is used for manipulation of
system Smack attributes.

The patch, patches for ls and sshd, a README, a startup script,
and x86 binaries for ls and sshd are also available on

    http://www.schaufler-ca.com

Development has been done using Fedora Core 7 in a virtual machine
environment and on an old Sony laptop.

Smack provides mandatory access controls based on the label attached
to a task and the label attached to the object it is attempting to
access. Smack labels are deliberately short (1-23 characters) text
strings. Single character labels using special characters are reserved
for system use. The only operation applied to Smack labels is equality
comparison. No wildcards or expressions, regular or otherwise, are
used. Smack labels are composed of printable characters and may not
include "/".

A file always gets the Smack label of the task that created it.

Smack defines and uses these labels:

    "*" - pronounced "star"
    "_" - pronounced "floor"
    "^" - pronounced "hat"
    "?" - pronounced "huh"

The access rules enforced by Smack are, in order:

1. Any access requested by a task labeled "*" is denied.
2. A read or execute access requested by a task labeled "^"
   is permitted.
3. A read or execute access requested on an object labeled "_"
   is permitted.
4. Any access requested on an object labeled "*" is permitted.
5. Any access requested by a task on an object with the same
   label is permitted.
6. Any access requested that is explicitly defined in the loaded
   rule set is permitted.
7. Any other access is denied.

Rules may be explicitly defined by writing subject,object,access
triples to /smack/load.

Smack rule sets can be easily defined that describe Bell&LaPadula
sensitivity, Biba integrity, and a variety of interesting
configurations. Smack rule sets can be modified on the fly to
accommodate changes in the operating environment or even the time
of day.

Some practical use cases:

Hierarchical levels. The less common of the two usual uses
for MLS systems is to define hierarchical levels, often
unclassified, confidential, secret, and so on. To set up smack
to support this, these rules could be defined:

   C        Unclass rx
   S        C       rx
   S        Unclass rx
   TS       S       rx
   TS       C       rx
   TS       Unclass rx

A TS process can read S, C, and Unclass data, but cannot write it.
An S process can read C and Unclass. Note that specifying that
TS can read S and S can read C does not imply TS can read C, it
has to be explicitly stated.

Non-hierarchical categories. This is the more common of the
usual uses for an MLS system. Since the default rule is that a
subject cannot access an object with a different label no
access rules are required to implement compartmentalization.

A case that the Bell & LaPadula policy does not allow is demonstrated
with this Smack access rule:

A case that Bell&LaPadula does not allow that Smack does:

    ESPN    ABC   r
    ABC     ESPN  r

On my portable video device I have two applications, one that
shows ABC programming and the other ESPN programming. ESPN wants
to show me sport stories that show up as news, and ABC will
only provide minimal information about a sports story if ESPN
is covering it. Each side can look at the other's info, neither
can change the other. Neither can see what FOX is up to, which
is just as well all things considered.

Another case that I especially like:

    SatData Guard   w
    Guard   Publish w

A program running with the Guard label opens a UDP socket and
accepts messages sent by a program running with a SatData label.
The Guard program inspects the message to ensure it is wholesome
and if it is sends it to a program running with the Publish label.
This program then puts the information passed in an appropriate
place. Note that the Guard program cannot write to a Publish
file system object because file system semanitic require read as
well as write.

The four cases (categories, levels, mutual read, guardbox) here
are all quite real, and problems I've been asked to solve over
the years. The first two are easy to do with traditonal MLS systems
while the last two you can't without invoking privilege, at least
for a while.
Signed-off-by: NCasey Schaufler <casey@schaufler-ca.com>
Cc: Joshua Brindle <method@manicmethod.com>
Cc: Paul Moore <paul.moore@hp.com>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Cc: Chris Wright <chrisw@sous-sol.org>
Cc: James Morris <jmorris@namei.org>
Cc: "Ahmed S. Darwish" <darwish.07@gmail.com>
Cc: Andrew G. Morgan <morgan@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The capability bounding set is a set beyond which capabilities cannot grow.
 Currently cap_bset is per-system.  It can be manipulated through sysctl,
but only init can add capabilities.  Root can remove capabilities.  By
default it includes all caps except CAP_SETPCAP.

This patch makes the bounding set per-process when file capabilities are
enabled.  It is inherited at fork from parent.  Noone can add elements,
CAP_SETPCAP is required to remove them.

One example use of this is to start a safer container.  For instance, until
device namespaces or per-container device whitelists are introduced, it is
best to take CAP_MKNOD away from a container.

The bounding set will not affect pP and pE immediately.  It will only
affect pP' and pE' after subsequent exec()s.  It also does not affect pI,
and exec() does not constrain pI'.  So to really start a shell with no way
of regain CAP_MKNOD, you would do

	prctl(PR_CAPBSET_DROP, CAP_MKNOD);
	cap_t cap = cap_get_proc();
	cap_value_t caparray[1];
	caparray[0] = CAP_MKNOD;
	cap_set_flag(cap, CAP_INHERITABLE, 1, caparray, CAP_DROP);
	cap_set_proc(cap);
	cap_free(cap);

The following test program will get and set the bounding
set (but not pI).  For instance

	./bset get
		(lists capabilities in bset)
	./bset drop cap_net_raw
		(starts shell with new bset)
		(use capset, setuid binary, or binary with
		file capabilities to try to increase caps)

************************************************************
cap_bound.c
************************************************************
 #include <sys/prctl.h>
 #include <linux/capability.h>
 #include <sys/types.h>
 #include <unistd.h>
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>

 #ifndef PR_CAPBSET_READ
 #define PR_CAPBSET_READ 23
 #endif

 #ifndef PR_CAPBSET_DROP
 #define PR_CAPBSET_DROP 24
 #endif

int usage(char *me)
{
	printf("Usage: %s get\n", me);
	printf("       %s drop <capability>\n", me);
	return 1;
}

 #define numcaps 32
char *captable[numcaps] = {
	"cap_chown",
	"cap_dac_override",
	"cap_dac_read_search",
	"cap_fowner",
	"cap_fsetid",
	"cap_kill",
	"cap_setgid",
	"cap_setuid",
	"cap_setpcap",
	"cap_linux_immutable",
	"cap_net_bind_service",
	"cap_net_broadcast",
	"cap_net_admin",
	"cap_net_raw",
	"cap_ipc_lock",
	"cap_ipc_owner",
	"cap_sys_module",
	"cap_sys_rawio",
	"cap_sys_chroot",
	"cap_sys_ptrace",
	"cap_sys_pacct",
	"cap_sys_admin",
	"cap_sys_boot",
	"cap_sys_nice",
	"cap_sys_resource",
	"cap_sys_time",
	"cap_sys_tty_config",
	"cap_mknod",
	"cap_lease",
	"cap_audit_write",
	"cap_audit_control",
	"cap_setfcap"
};

int getbcap(void)
{
	int comma=0;
	unsigned long i;
	int ret;

	printf("i know of %d capabilities\n", numcaps);
	printf("capability bounding set:");
	for (i=0; i<numcaps; i++) {
		ret = prctl(PR_CAPBSET_READ, i);
		if (ret < 0)
			perror("prctl");
		else if (ret==1)
			printf("%s%s", (comma++) ? ", " : " ", captable[i]);
	}
	printf("\n");
	return 0;
}

int capdrop(char *str)
{
	unsigned long i;

	int found=0;
	for (i=0; i<numcaps; i++) {
		if (strcmp(captable[i], str) == 0) {
			found=1;
			break;
		}
	}
	if (!found)
		return 1;
	if (prctl(PR_CAPBSET_DROP, i)) {
		perror("prctl");
		return 1;
	}
	return 0;
}

int main(int argc, char *argv[])
{
	if (argc<2)
		return usage(argv[0]);
	if (strcmp(argv[1], "get")==0)
		return getbcap();
	if (strcmp(argv[1], "drop")!=0 || argc<3)
		return usage(argv[0]);
	if (capdrop(argv[2])) {
		printf("unknown capability\n");
		return 1;
	}
	return execl("/bin/bash", "/bin/bash", NULL);
}
************************************************************

[serue@us.ibm.com: fix typo]
Signed-off-by: NSerge E. Hallyn <serue@us.ibm.com>
Signed-off-by: NAndrew G. Morgan <morgan@kernel.org>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Cc: James Morris <jmorris@namei.org>
Cc: Chris Wright <chrisw@sous-sol.org>
Cc: Casey Schaufler <casey@schaufler-ca.com>a
Signed-off-by: N"Serge E. Hallyn" <serue@us.ibm.com>
Tested-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

KaiGai Kohei observed that this line in the linux header is not needed.
Signed-off-by: NAndrew G. Morgan <morgan@kernel.org>
Cc: KaiGai Kohei <kaigai@kaigai.gr.jp>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The patch supports legacy (32-bit) capability userspace, and where possible
translates 32-bit capabilities to/from userspace and the VFS to 64-bit
kernel space capabilities.  If a capability set cannot be compressed into
32-bits for consumption by user space, the system call fails, with -ERANGE.

FWIW libcap-2.00 supports this change (and earlier capability formats)

 http://www.kernel.org/pub/linux/libs/security/linux-privs/kernel-2.6/

[akpm@linux-foundation.org: coding-syle fixes]
[akpm@linux-foundation.org: use get_task_comm()]
[ezk@cs.sunysb.edu: build fix]
[akpm@linux-foundation.org: do not initialise statics to 0 or NULL]
[akpm@linux-foundation.org: unused var]
[serue@us.ibm.com: export __cap_ symbols]
Signed-off-by: NAndrew G. Morgan <morgan@kernel.org>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Acked-by: NSerge Hallyn <serue@us.ibm.com>
Cc: Chris Wright <chrisw@sous-sol.org>
Cc: James Morris <jmorris@namei.org>
Cc: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: NErez Zadok <ezk@cs.sunysb.edu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Revert b68680e4 to make way for the next
patch: "Add 64-bit capability support to the kernel".

We want to keep the vfs_cap_data.data[] structure, using two 'data's for
64-bit caps (and later three for 96-bit caps), whereas
b68680e4 had gotten rid of the 'data' struct
made its members inline.

The 64-bit caps patch keeps the stack abuse fix at get_file_caps(), which was
the more important part of that patch.

[akpm@linux-foundation.org: coding-style fixes]
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Cc: Serge Hallyn <serue@us.ibm.com>
Cc: Chris Wright <chrisw@sous-sol.org>
Cc: James Morris <jmorris@namei.org>
Cc: Casey Schaufler <casey@schaufler-ca.com>
Cc: Andrew Morgan <morgan@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Simplify the vfs_cap_data structure.

Also fix get_file_caps which was declaring
__le32 v1caps[XATTR_CAPS_SZ] on the stack, but
XATTR_CAPS_SZ is already * sizeof(__le32).

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: NSerge E. Hallyn <serue@us.ibm.com>
Cc: Andrew Morgan <morgan@kernel.org>
Cc: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The non-filesystem capability meaning of CAP_SETPCAP is that a process, p1,
can change the capabilities of another process, p2.  This is not the
meaning that was intended for this capability at all, and this
implementation came about purely because, without filesystem capabilities,
there was no way to use capabilities without one process bestowing them on
another.

Since we now have a filesystem support for capabilities we can fix the
implementation of CAP_SETPCAP.

The most significant thing about this change is that, with it in effect, no
process can set the capabilities of another process.

The capabilities of a program are set via the capability convolution
rules:

   pI(post-exec) = pI(pre-exec)
   pP(post-exec) = (X(aka cap_bset) & fP) | (pI(post-exec) & fI)
   pE(post-exec) = fE ? pP(post-exec) : 0

at exec() time.  As such, the only influence the pre-exec() program can
have on the post-exec() program's capabilities are through the pI
capability set.

The correct implementation for CAP_SETPCAP (and that enabled by this patch)
is that it can be used to add extra pI capabilities to the current process
- to be picked up by subsequent exec()s when the above convolution rules
are applied.

Here is how it works:

Let's say we have a process, p. It has capability sets, pE, pP and pI.
Generally, p, can change the value of its own pI to pI' where

   (pI' & ~pI) & ~pP = 0.

That is, the only new things in pI' that were not present in pI need to
be present in pP.

The role of CAP_SETPCAP is basically to permit changes to pI beyond
the above:

   if (pE & CAP_SETPCAP) {
      pI' = anything; /* ie., even (pI' & ~pI) & ~pP != 0  */
   }

This capability is useful for things like login, which (say, via
pam_cap) might want to raise certain inheritable capabilities for use
by the children of the logged-in user's shell, but those capabilities
are not useful to or needed by the login program itself.

One such use might be to limit who can run ping. You set the
capabilities of the 'ping' program to be "= cap_net_raw+i", and then
only shells that have (pI & CAP_NET_RAW) will be able to run
it. Without CAP_SETPCAP implemented as described above, login(pam_cap)
would have to also have (pP & CAP_NET_RAW) in order to raise this
capability and pass it on through the inheritable set.
Signed-off-by: NAndrew Morgan <morgan@kernel.org>
Signed-off-by: NSerge E. Hallyn <serue@us.ibm.com>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Cc: James Morris <jmorris@namei.org>
Cc: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Implement file posix capabilities.  This allows programs to be given a
subset of root's powers regardless of who runs them, without having to use
setuid and giving the binary all of root's powers.

This version works with Kaigai Kohei's userspace tools, found at
http://www.kaigai.gr.jp/index.php.  For more information on how to use this
patch, Chris Friedhoff has posted a nice page at
http://www.friedhoff.org/fscaps.html.

Changelog:
	Nov 27:
	Incorporate fixes from Andrew Morton
	(security-introduce-file-caps-tweaks and
	security-introduce-file-caps-warning-fix)
	Fix Kconfig dependency.
	Fix change signaling behavior when file caps are not compiled in.

	Nov 13:
	Integrate comments from Alexey: Remove CONFIG_ ifdef from
	capability.h, and use %zd for printing a size_t.

	Nov 13:
	Fix endianness warnings by sparse as suggested by Alexey
	Dobriyan.

	Nov 09:
	Address warnings of unused variables at cap_bprm_set_security
	when file capabilities are disabled, and simultaneously clean
	up the code a little, by pulling the new code into a helper
	function.

	Nov 08:
	For pointers to required userspace tools and how to use
	them, see http://www.friedhoff.org/fscaps.html.

	Nov 07:
	Fix the calculation of the highest bit checked in
	check_cap_sanity().

	Nov 07:
	Allow file caps to be enabled without CONFIG_SECURITY, since
	capabilities are the default.
	Hook cap_task_setscheduler when !CONFIG_SECURITY.
	Move capable(TASK_KILL) to end of cap_task_kill to reduce
	audit messages.

	Nov 05:
	Add secondary calls in selinux/hooks.c to task_setioprio and
	task_setscheduler so that selinux and capabilities with file
	cap support can be stacked.

	Sep 05:
	As Seth Arnold points out, uid checks are out of place
	for capability code.

	Sep 01:
	Define task_setscheduler, task_setioprio, cap_task_kill, and
	task_setnice to make sure a user cannot affect a process in which
	they called a program with some fscaps.

	One remaining question is the note under task_setscheduler: are we
	ok with CAP_SYS_NICE being sufficient to confine a process to a
	cpuset?

	It is a semantic change, as without fsccaps, attach_task doesn't
	allow CAP_SYS_NICE to override the uid equivalence check.  But since
	it uses security_task_setscheduler, which elsewhere is used where
	CAP_SYS_NICE can be used to override the uid equivalence check,
	fixing it might be tough.

	     task_setscheduler
		 note: this also controls cpuset:attach_task.  Are we ok with
		     CAP_SYS_NICE being used to confine to a cpuset?
	     task_setioprio
	     task_setnice
		 sys_setpriority uses this (through set_one_prio) for another
		 process.  Need same checks as setrlimit

	Aug 21:
	Updated secureexec implementation to reflect the fact that
	euid and uid might be the same and nonzero, but the process
	might still have elevated caps.

	Aug 15:
	Handle endianness of xattrs.
	Enforce capability version match between kernel and disk.
	Enforce that no bits beyond the known max capability are
	set, else return -EPERM.
	With this extra processing, it may be worth reconsidering
	doing all the work at bprm_set_security rather than
	d_instantiate.

	Aug 10:
	Always call getxattr at bprm_set_security, rather than
	caching it at d_instantiate.

[morgan@kernel.org: file-caps clean up for linux/capability.h]
[bunk@kernel.org: unexport cap_inode_killpriv]
Signed-off-by: NSerge E. Hallyn <serue@us.ibm.com>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Cc: James Morris <jmorris@namei.org>
Cc: Chris Wright <chrisw@sous-sol.org>
Cc: Andrew Morgan <morgan@kernel.org>
Signed-off-by: NAndrew Morgan <morgan@kernel.org>
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove the obviously unnecessary includes of <linux/spinlock.h> under the
include/linux/ directory, and fix the couple errors that are introduced as
a result of that.
Signed-off-by: NRobert P. J. Day <rpjday@mindspring.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

include/linux/capability.h:397: warning: "struct task_struct" declared inside parameter list
include/linux/capability.h:397: warning: its scope is only this definition or declaration, which is probably not what you want
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Move capable() to kernel/capability.c and eliminate duplicate
implementations.  Add __capable() function which can be used to check for
capabiilty of any process.
Signed-off-by: NChris Wright <chrisw@sous-sol.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

- Move capable() from sched.h to capability.h;

- Use <linux/capability.h> where capable() is used
	(in include/, block/, ipc/, kernel/, a few drivers/,
	mm/, security/, & sound/;
	many more drivers/ to go)
Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add a capability check to sys_set_zone_reclaim().  This syscall is not
something that should be available to a user.
Signed-off-by: NMartin Hicks <mort@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!