- 05 7月, 2017 3 次提交
-
-
由 Andreas Gruenbacher 提交于
On failure, keep the inode glock across the final iput of the new inode so that gfs2_evict_inode doesn't have to re-acquire the glock. That way, gfs2_evict_inode won't need to revalidate the block type. Signed-off-by: NAndreas Gruenbacher <agruenba@redhat.com> Signed-off-by: NBob Peterson <rpeterso@redhat.com>
-
由 Andreas Gruenbacher 提交于
Put all remaining accesses to gl->gl_object under the gl->gl_lockref.lock spinlock to prevent races. Signed-off-by: NAndreas Gruenbacher <agruenba@redhat.com> Signed-off-by: NBob Peterson <rpeterso@redhat.com>
-
由 Andreas Gruenbacher 提交于
So far, gfs2_evict_inode clears gl->gl_object and then flushes the glock work queue to make sure that inode glops which dereference gl->gl_object have finished running before the inode is destroyed. However, flushing the work queue may do more work than needed, and in particular, it may call into DLM, which we want to avoid here. Use a bit lock (GIF_GLOP_PENDING) to synchronize between the inode glops and gfs2_evict_inode instead to get rid of the flushing. In addition, flush the work queues of existing glocks before reusing them for new inodes to get those glocks into a known state: the glock state engine currently doesn't handle glock re-appropriation correctly. (We may be able to fix the glock state engine instead later.) Based on a patch by Steven Whitehouse <swhiteho@redhat.com>. Signed-off-by: NAndreas Gruenbacher <agruenba@redhat.com> Signed-off-by: NBob Peterson <rpeterso@redhat.com>
-
- 03 4月, 2017 1 次提交
-
-
由 Andreas Gruenbacher 提交于
Revert commit 86d067a7: it turns out that waiting for iopen glock dequeues here isn't needed anymore because the bugs that commit was meant to fix have been fixed otherwise. In addition, we want to avoid waiting on glocks in gfs2_evict_inode in shrinker context because the shrinker may be invoked on behalf of DLM, in which case calling into DLM again would deadlock. This commit makes the described scenario less likely without completely avoiding it; it's still a step in the right direction, though. Signed-off-by: NAndreas Gruenbacher <agruenba@redhat.com> Signed-off-by: NBob Peterson <rpeterso@redhat.com>
-
- 17 3月, 2017 1 次提交
-
-
由 Bob Peterson 提交于
Before this patch i_no_addr was not initialized until after the return from allocating its block. That meant the i_no_addr was temporarily uninitialized storage. Ordinarily that's not a concern, but if inplace_reserve can't find space, it can call try_rgrp_unlink which references i_no_addr as a block to avoid. That can result in unpredictable behavior. More importantly, the trace point in gfs2_alloc_blocks references ip->i_no_addr before it is set, which is misleading when reading the kernel traces. This patch makes it look like the new dinode block was assigned in the name of inode 0 rather than a random inode that's completely unrelated. Signed-off-by: NBob Peterson <rpeterso@redhat.com>
-
- 03 3月, 2017 1 次提交
-
-
由 David Howells 提交于
Add a system call to make extended file information available, including file creation and some attribute flags where available through the underlying filesystem. The getattr inode operation is altered to take two additional arguments: a u32 request_mask and an unsigned int flags that indicate the synchronisation mode. This change is propagated to the vfs_getattr*() function. Functions like vfs_stat() are now inline wrappers around new functions vfs_statx() and vfs_statx_fd() to reduce stack usage. ======== OVERVIEW ======== The idea was initially proposed as a set of xattrs that could be retrieved with getxattr(), but the general preference proved to be for a new syscall with an extended stat structure. A number of requests were gathered for features to be included. The following have been included: (1) Make the fields a consistent size on all arches and make them large. (2) Spare space, request flags and information flags are provided for future expansion. (3) Better support for the y2038 problem [Arnd Bergmann] (tv_sec is an __s64). (4) Creation time: The SMB protocol carries the creation time, which could be exported by Samba, which will in turn help CIFS make use of FS-Cache as that can be used for coherency data (stx_btime). This is also specified in NFSv4 as a recommended attribute and could be exported by NFSD [Steve French]. (5) Lightweight stat: Ask for just those details of interest, and allow a netfs (such as NFS) to approximate anything not of interest, possibly without going to the server [Trond Myklebust, Ulrich Drepper, Andreas Dilger] (AT_STATX_DONT_SYNC). (6) Heavyweight stat: Force a netfs to go to the server, even if it thinks its cached attributes are up to date [Trond Myklebust] (AT_STATX_FORCE_SYNC). And the following have been left out for future extension: (7) Data version number: Could be used by userspace NFS servers [Aneesh Kumar]. Can also be used to modify fill_post_wcc() in NFSD which retrieves i_version directly, but has just called vfs_getattr(). It could get it from the kstat struct if it used vfs_xgetattr() instead. (There's disagreement on the exact semantics of a single field, since not all filesystems do this the same way). (8) BSD stat compatibility: Including more fields from the BSD stat such as creation time (st_btime) and inode generation number (st_gen) [Jeremy Allison, Bernd Schubert]. (9) Inode generation number: Useful for FUSE and userspace NFS servers [Bernd Schubert]. (This was asked for but later deemed unnecessary with the open-by-handle capability available and caused disagreement as to whether it's a security hole or not). (10) Extra coherency data may be useful in making backups [Andreas Dilger]. (No particular data were offered, but things like last backup timestamp, the data version number and the DOS archive bit would come into this category). (11) Allow the filesystem to indicate what it can/cannot provide: A filesystem can now say it doesn't support a standard stat feature if that isn't available, so if, for instance, inode numbers or UIDs don't exist or are fabricated locally... (This requires a separate system call - I have an fsinfo() call idea for this). (12) Store a 16-byte volume ID in the superblock that can be returned in struct xstat [Steve French]. (Deferred to fsinfo). (13) Include granularity fields in the time data to indicate the granularity of each of the times (NFSv4 time_delta) [Steve French]. (Deferred to fsinfo). (14) FS_IOC_GETFLAGS value. These could be translated to BSD's st_flags. Note that the Linux IOC flags are a mess and filesystems such as Ext4 define flags that aren't in linux/fs.h, so translation in the kernel may be a necessity (or, possibly, we provide the filesystem type too). (Some attributes are made available in stx_attributes, but the general feeling was that the IOC flags were to ext[234]-specific and shouldn't be exposed through statx this way). (15) Mask of features available on file (eg: ACLs, seclabel) [Brad Boyer, Michael Kerrisk]. (Deferred, probably to fsinfo. Finding out if there's an ACL or seclabal might require extra filesystem operations). (16) Femtosecond-resolution timestamps [Dave Chinner]. (A __reserved field has been left in the statx_timestamp struct for this - if there proves to be a need). (17) A set multiple attributes syscall to go with this. =============== NEW SYSTEM CALL =============== The new system call is: int ret = statx(int dfd, const char *filename, unsigned int flags, unsigned int mask, struct statx *buffer); The dfd, filename and flags parameters indicate the file to query, in a similar way to fstatat(). There is no equivalent of lstat() as that can be emulated with statx() by passing AT_SYMLINK_NOFOLLOW in flags. There is also no equivalent of fstat() as that can be emulated by passing a NULL filename to statx() with the fd of interest in dfd. Whether or not statx() synchronises the attributes with the backing store can be controlled by OR'ing a value into the flags argument (this typically only affects network filesystems): (1) AT_STATX_SYNC_AS_STAT tells statx() to behave as stat() does in this respect. (2) AT_STATX_FORCE_SYNC will require a network filesystem to synchronise its attributes with the server - which might require data writeback to occur to get the timestamps correct. (3) AT_STATX_DONT_SYNC will suppress synchronisation with the server in a network filesystem. The resulting values should be considered approximate. mask is a bitmask indicating the fields in struct statx that are of interest to the caller. The user should set this to STATX_BASIC_STATS to get the basic set returned by stat(). It should be noted that asking for more information may entail extra I/O operations. buffer points to the destination for the data. This must be 256 bytes in size. ====================== MAIN ATTRIBUTES RECORD ====================== The following structures are defined in which to return the main attribute set: struct statx_timestamp { __s64 tv_sec; __s32 tv_nsec; __s32 __reserved; }; struct statx { __u32 stx_mask; __u32 stx_blksize; __u64 stx_attributes; __u32 stx_nlink; __u32 stx_uid; __u32 stx_gid; __u16 stx_mode; __u16 __spare0[1]; __u64 stx_ino; __u64 stx_size; __u64 stx_blocks; __u64 __spare1[1]; struct statx_timestamp stx_atime; struct statx_timestamp stx_btime; struct statx_timestamp stx_ctime; struct statx_timestamp stx_mtime; __u32 stx_rdev_major; __u32 stx_rdev_minor; __u32 stx_dev_major; __u32 stx_dev_minor; __u64 __spare2[14]; }; The defined bits in request_mask and stx_mask are: STATX_TYPE Want/got stx_mode & S_IFMT STATX_MODE Want/got stx_mode & ~S_IFMT STATX_NLINK Want/got stx_nlink STATX_UID Want/got stx_uid STATX_GID Want/got stx_gid STATX_ATIME Want/got stx_atime{,_ns} STATX_MTIME Want/got stx_mtime{,_ns} STATX_CTIME Want/got stx_ctime{,_ns} STATX_INO Want/got stx_ino STATX_SIZE Want/got stx_size STATX_BLOCKS Want/got stx_blocks STATX_BASIC_STATS [The stuff in the normal stat struct] STATX_BTIME Want/got stx_btime{,_ns} STATX_ALL [All currently available stuff] stx_btime is the file creation time, stx_mask is a bitmask indicating the data provided and __spares*[] are where as-yet undefined fields can be placed. Time fields are structures with separate seconds and nanoseconds fields plus a reserved field in case we want to add even finer resolution. Note that times will be negative if before 1970; in such a case, the nanosecond fields will also be negative if not zero. The bits defined in the stx_attributes field convey information about a file, how it is accessed, where it is and what it does. The following attributes map to FS_*_FL flags and are the same numerical value: STATX_ATTR_COMPRESSED File is compressed by the fs STATX_ATTR_IMMUTABLE File is marked immutable STATX_ATTR_APPEND File is append-only STATX_ATTR_NODUMP File is not to be dumped STATX_ATTR_ENCRYPTED File requires key to decrypt in fs Within the kernel, the supported flags are listed by: KSTAT_ATTR_FS_IOC_FLAGS [Are any other IOC flags of sufficient general interest to be exposed through this interface?] New flags include: STATX_ATTR_AUTOMOUNT Object is an automount trigger These are for the use of GUI tools that might want to mark files specially, depending on what they are. Fields in struct statx come in a number of classes: (0) stx_dev_*, stx_blksize. These are local system information and are always available. (1) stx_mode, stx_nlinks, stx_uid, stx_gid, stx_[amc]time, stx_ino, stx_size, stx_blocks. These will be returned whether the caller asks for them or not. The corresponding bits in stx_mask will be set to indicate whether they actually have valid values. If the caller didn't ask for them, then they may be approximated. For example, NFS won't waste any time updating them from the server, unless as a byproduct of updating something requested. If the values don't actually exist for the underlying object (such as UID or GID on a DOS file), then the bit won't be set in the stx_mask, even if the caller asked for the value. In such a case, the returned value will be a fabrication. Note that there are instances where the type might not be valid, for instance Windows reparse points. (2) stx_rdev_*. This will be set only if stx_mode indicates we're looking at a blockdev or a chardev, otherwise will be 0. (3) stx_btime. Similar to (1), except this will be set to 0 if it doesn't exist. ======= TESTING ======= The following test program can be used to test the statx system call: samples/statx/test-statx.c Just compile and run, passing it paths to the files you want to examine. The file is built automatically if CONFIG_SAMPLES is enabled. Here's some example output. Firstly, an NFS directory that crosses to another FSID. Note that the AUTOMOUNT attribute is set because transiting this directory will cause d_automount to be invoked by the VFS. [root@andromeda ~]# /tmp/test-statx -A /warthog/data statx(/warthog/data) = 0 results=7ff Size: 4096 Blocks: 8 IO Block: 1048576 directory Device: 00:26 Inode: 1703937 Links: 125 Access: (3777/drwxrwxrwx) Uid: 0 Gid: 4041 Access: 2016-11-24 09:02:12.219699527+0000 Modify: 2016-11-17 10:44:36.225653653+0000 Change: 2016-11-17 10:44:36.225653653+0000 Attributes: 0000000000001000 (-------- -------- -------- -------- -------- -------- ---m---- --------) Secondly, the result of automounting on that directory. [root@andromeda ~]# /tmp/test-statx /warthog/data statx(/warthog/data) = 0 results=7ff Size: 4096 Blocks: 8 IO Block: 1048576 directory Device: 00:27 Inode: 2 Links: 125 Access: (3777/drwxrwxrwx) Uid: 0 Gid: 4041 Access: 2016-11-24 09:02:12.219699527+0000 Modify: 2016-11-17 10:44:36.225653653+0000 Change: 2016-11-17 10:44:36.225653653+0000 Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 02 3月, 2017 1 次提交
-
-
由 Ingo Molnar 提交于
Add #include <linux/cred.h> dependencies to all .c files rely on sched.h doing that for them. Note that even if the count where we need to add extra headers seems high, it's still a net win, because <linux/sched.h> is included in over 2,200 files ... Acked-by: NLinus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
- 25 12月, 2016 1 次提交
-
-
由 Linus Torvalds 提交于
This was entirely automated, using the script by Al: PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>' sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \ $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h) to do the replacement at the end of the merge window. Requested-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 09 12月, 2016 1 次提交
-
-
由 Miklos Szeredi 提交于
If .readlink == NULL implies generic_readlink(). Generated by: to_del="\.readlink.*=.*generic_readlink" for i in `git grep -l $to_del`; do sed -i "/$to_del"/d $i; done Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>
-
- 08 10月, 2016 1 次提交
-
-
由 Andreas Gruenbacher 提交于
These inode operations are no longer used; remove them. Signed-off-by: NAndreas Gruenbacher <agruenba@redhat.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 28 9月, 2016 1 次提交
-
-
由 Deepa Dinamani 提交于
CURRENT_TIME macro is not appropriate for filesystems as it doesn't use the right granularity for filesystem timestamps. Use current_time() instead. CURRENT_TIME is also not y2038 safe. This is also in preparation for the patch that transitions vfs timestamps to use 64 bit time and hence make them y2038 safe. As part of the effort current_time() will be extended to do range checks. Hence, it is necessary for all file system timestamps to use current_time(). Also, current_time() will be transitioned along with vfs to be y2038 safe. Note that whenever a single call to current_time() is used to change timestamps in different inodes, it is because they share the same time granularity. Signed-off-by: NDeepa Dinamani <deepa.kernel@gmail.com> Reviewed-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NFelipe Balbi <balbi@kernel.org> Acked-by: NSteven Whitehouse <swhiteho@redhat.com> Acked-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Acked-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 27 9月, 2016 2 次提交
-
-
由 Miklos Szeredi 提交于
Generated patch: sed -i "s/\.rename2\t/\.rename\t\t/" `git grep -wl rename2` sed -i "s/\brename2\b/rename/g" `git grep -wl rename2` Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>
-
由 Andreas Gruenbacher 提交于
Fix for commit 719ee344: initialize atime of I_NEW inodes to 0 so that the timestamps read from disk will always be more recent than the initial timestamp, and the atime in the I_NEW inode will be set correctly. Signed-off-by: NAndreas Gruenbacher <agruenba@redhat.com> Signed-off-by: NBob Peterson <rpeterso@redhat.com>
-
- 22 9月, 2016 1 次提交
-
-
由 Jan Kara 提交于
inode_change_ok() will be resposible for clearing capabilities and IMA extended attributes and as such will need dentry. Give it as an argument to inode_change_ok() instead of an inode. Also rename inode_change_ok() to setattr_prepare() to better relect that it does also some modifications in addition to checks. Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NJan Kara <jack@suse.cz>
-
- 07 8月, 2016 1 次提交
-
-
由 Eryu Guan 提交于
In most cases, EPERM is returned on immutable inode, and there're only a few places returning EACCES. I noticed this when running LTP on overlayfs, setxattr03 failed due to unexpected EACCES on immutable inode. So converting all EACCES to EPERM on immutable inode. Acked-by: NDave Chinner <dchinner@redhat.com> Signed-off-by: NEryu Guan <guaneryu@gmail.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 06 7月, 2016 1 次提交
-
-
由 Al Viro 提交于
->atomic_open() can be given an in-lookup dentry *or* a negative one found in dcache. Use d_in_lookup() to tell one from another, rather than d_unhashed(). Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 27 6月, 2016 4 次提交
-
-
由 Andreas Gruenbacher 提交于
Make the code more readable by cleaning up the different ways of initializing lock holders and checking for initialized lock holders: mark lock holders as uninitialized by setting the holder's glock to NULL (gfs2_holder_mark_uninitialized) instead of zeroing out the entire object or using a separate flag. Recognize initialized holders by their non-NULL glock (gfs2_holder_initialized). Don't zero out holder objects which are immeditiately initialized via gfs2_holder_init or gfs2_glock_nq_init. Signed-off-by: NAndreas Gruenbacher <agruenba@redhat.com> Signed-off-by: NBob Peterson <rpeterso@redhat.com>
-
由 Andreas Gruenbacher 提交于
Commit ff34245d switched from iget5_locked to iget_locked among other things, but iget_locked doesn't work for filesystems larger than 2^32 blocks on 32-bit systems. Switch back to iget5_locked. Filesystems larger than 2^32 blocks are unrealistic to work well on 32-bit systems, so this is mostly a code cleanliness fix. Signed-off-by: NAndreas Gruenbacher <agruenba@redhat.com> Signed-off-by: NBob Peterson <rpeterso@redhat.com>
-
由 Andreas Gruenbacher 提交于
Now that gfs2_lookup_by_inum only takes the inode glock for new inodes (and not for cached inodes anymore), there no longer is a need to optimize the cached-inode case in gfs2_get_dentry or delete_work_func, and gfs2_ilookup can be removed. In addition, gfs2_get_dentry wasn't checking the GFS2_DIF_SYSTEM flag in i_diskflags in the gfs2_ilookup case (see gfs2_lookup_by_inum); this inconsistency goes away as well. Signed-off-by: NAndreas Gruenbacher <agruenba@redhat.com> Signed-off-by: NBob Peterson <rpeterso@redhat.com>
-
由 Andreas Gruenbacher 提交于
The current gfs2_lookup_by_inum takes the glock of a presumed inode identified by block number, verifies that the block is indeed an inode, and then instantiates and reads the new inode via gfs2_inode_lookup. However, instantiating a new inode may block on freeing a previous instance of that inode (__wait_on_freeing_inode), and freeing an inode requires to take the glock already held, leading to lock inversion and deadlock. Fix this by first instantiating the new inode, then verifying that the block is an inode (if required), and then reading in the new inode, all in gfs2_inode_lookup. If the block we are looking for is not an inode, we discard the new inode via iget_failed, which marks inodes as bad and unhashes them. Other tasks waiting on that inode will get back a bad inode back from ilookup or iget_locked; in that case, retry the lookup. Signed-off-by: NAndreas Gruenbacher <agruenba@redhat.com> Signed-off-by: NBob Peterson <rpeterso@redhat.com>
-
- 13 5月, 2016 1 次提交
-
-
由 Al Viro 提交于
Switch to the generic xattr handlers and take the necessary glocks at the layer below. The following are the new xattr "entry points"; they are called with the glock held already in the following cases: gfs2_xattr_get: From SELinux, during lookups. gfs2_xattr_set: The glock is never held. gfs2_get_acl: From gfs2_create_inode -> posix_acl_create and gfs2_setattr -> posix_acl_chmod. gfs2_set_acl: From gfs2_setattr -> posix_acl_chmod. Signed-off-by: NAndreas Gruenbacher <agruenba@redhat.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 14 4月, 2016 1 次提交
-
-
由 Bob Peterson 提交于
Function gfs2_inode_lookup was dereferencing the inode, and after, it checks for the value being NULL. We need to check that first. Signed-off-by: NBob Peterson <rpeterso@redhat.com>
-
- 11 4月, 2016 1 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 15 3月, 2016 3 次提交
-
-
由 Bob Peterson 提交于
Now that we're not filtering out I_FREEING inodes from our lookups anymore, we can eliminate the non_block parameter from the lookup function. Signed-off-by: NBob Peterson <rpeterso@redhat.com> Acked-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Bob Peterson 提交于
This patch basically reverts a very old patch from 2008, 7a9f53b3, with the title "Alternate gfs2_iget to avoid looking up inodes being freed". The original patch was designed to avoid a deadlock caused by lock ordering with try_rgrp_unlink. The patch forced the function to not find inodes that were being removed by VFS. The problem is, that made it impossible for nodes to delete their own unlinked dinodes after a certain point in time, because the inode needed was not found by this filtering process. There is no longer a need for the patch, since function try_rgrp_unlink no longer locks the inode: All it does is queue the glock onto the delete work_queue, so there should be no more deadlock. Signed-off-by: NBob Peterson <rpeterso@redhat.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Bob Peterson 提交于
This patch tries to prevent delete work (queued via iopen callback) from executing if the glock is currently being used to create a new inode. Signed-off-by: NBob Peterson <rpeterso@redhat.com> Acked-by: NSteven Whitehouse <swhiteho@redhat.com>
-
- 23 1月, 2016 1 次提交
-
-
由 Al Viro 提交于
parallel to mutex_{lock,unlock,trylock,is_locked,lock_nested}, inode_foo(inode) being mutex_foo(&inode->i_mutex). Please, use those for access to ->i_mutex; over the coming cycle ->i_mutex will become rwsem, with ->lookup() done with it held only shared. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 31 12月, 2015 1 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 19 12月, 2015 3 次提交
-
-
由 Bob Peterson 提交于
Currently the error path of function gfs2_inode_lookup calls function gfs2_glock_put corresponding to an earlier call to gfs2_glock_get for the inode glock. That's wrong because the error path also calls iget_failed() which eventually calls iput, which eventually calls gfs2_evict_inode, which does another gfs2_glock_put. This double-put can cause the glock reference count to get off. Signed-off-by: NBob Peterson <rpeterso@redhat.com>
-
由 Bob Peterson 提交于
Some error cases in gfs2_create_inode were not unlocking the iopen glock, getting the reference count off. This adds the proper unlock. The error logic in function gfs2_create_inode was also convoluted, so this patch simplifies it. It also takes care of a bug in which gfs2_qa_delete() was not called in an error case. Signed-off-by: NBob Peterson <rpeterso@redhat.com>
-
由 Bob Peterson 提交于
This patch changes every glock_dq for iopen glocks into a dq_wait. This makes sure that iopen glocks do not outlive the inode itself. In turn, that ensures that anyone trying to unlink the glock will be able to find the inode when it receives a remote iopen callback. Signed-off-by: NBob Peterson <rpeterso@redhat.com> Acked-by: NSteven Whitehouse <swhiteho@redhat.com>
-
- 15 12月, 2015 1 次提交
-
-
由 Bob Peterson 提交于
Before this patch, multi-block reservation structures were allocated from a special slab. This patch folds the structure into the gfs2_inode structure. The disadvantage is that the gfs2_inode needs more memory, even when a file is opened read-only. The advantages are: (a) we don't need the special slab and the extra time it takes to allocate and deallocate from it. (b) we no longer need to worry that the structure exists for things like quota management. (c) This also allows us to remove the calls to get_write_access and put_write_access since we know the structure will exist. Signed-off-by: NBob Peterson <rpeterso@redhat.com>
-
- 09 12月, 2015 1 次提交
-
-
由 Al Viro 提交于
new method: ->get_link(); replacement of ->follow_link(). The differences are: * inode and dentry are passed separately * might be called both in RCU and non-RCU mode; the former is indicated by passing it a NULL dentry. * when called that way it isn't allowed to block and should return ERR_PTR(-ECHILD) if it needs to be called in non-RCU mode. It's a flagday change - the old method is gone, all in-tree instances converted. Conversion isn't hard; said that, so far very few instances do not immediately bail out when called in RCU mode. That'll change in the next commits. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 24 11月, 2015 1 次提交
-
-
由 Bob Peterson 提交于
This patch basically reverts the majority of patch 5407e242. That patch eliminated the gfs2_qadata structure in favor of just using the reservations structure. The problem with doing that is that it increases the size of the reservations structure. That is not an issue until it comes time to fold the reservations structure into the inode in memory so we know it's always there. By separating out the quota structure again, we aren't punishing the non-quota users by making all the inodes bigger, requiring more slab space. This patch creates a new slab area to allocate the quota stuff so it's managed a little more sanely. Signed-off-by: NBob Peterson <rpeterso@redhat.com>
-
- 11 11月, 2015 1 次提交
-
-
由 Abhi Das 提交于
When new files and directories are created inside a parent directory we automatically inherit the GFS2_DIF_SYSTEM flag (if set) and assign it to the new file/dirs. All new system files/dirs created in the metafs by, say gfs2_jadd, will have this flag set because they will have parent directories in the metafs whose GFS2_DIF_SYSTEM flag has already been set (most likely by a previous mkfs.gfs2) Signed-off-by: NAbhi Das <adas@redhat.com> Signed-off-by: NBob Peterson <rpeterso@redhat.com>
-
- 03 6月, 2015 1 次提交
-
-
由 Abhi Das 提交于
For smaller block sizes (512B, 1K, 2K), some quotas straddle block boundaries such that the usage value is on one block and the rest of the quota is on the previous block. In such cases, the value does not get updated correctly. This patch fixes that by addressing the boundary conditions correctly. This patch also adds a (s64) cast that was missing in a call to gfs2_quota_change() in inode.c Signed-off-by: NAbhi Das <adas@redhat.com> Signed-off-by: NBob Peterson <rpeterso@redhat.com>
-
- 11 5月, 2015 2 次提交
-
-
由 Al Viro 提交于
its only use is getting passed to nd_jump_link(), which can obtain it from current->nameidata Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
a) instead of storing the symlink body (via nd_set_link()) and returning an opaque pointer later passed to ->put_link(), ->follow_link() _stores_ that opaque pointer (into void * passed by address by caller) and returns the symlink body. Returning ERR_PTR() on error, NULL on jump (procfs magic symlinks) and pointer to symlink body for normal symlinks. Stored pointer is ignored in all cases except the last one. Storing NULL for opaque pointer (or not storing it at all) means no call of ->put_link(). b) the body used to be passed to ->put_link() implicitly (via nameidata). Now only the opaque pointer is. In the cases when we used the symlink body to free stuff, ->follow_link() now should store it as opaque pointer in addition to returning it. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 06 5月, 2015 1 次提交
-
-
由 Benjamin Marzinski 提交于
gfs2 now uses the rename2 directory iop, and supports the RENAME_EXCHANGE flag (as well as RENAME_NOREPLACE, which the vfs takes care of). Signed-off-by: Benjamin Marzinski <bmarzins redhat com> Signed-off-by: NBob Peterson <rpeterso@redhat.com>
-
- 02 5月, 2015 1 次提交
-
-
由 Antonio Ospite 提交于
Follow the same style used for the other functions in the same file. Signed-off-by: NAntonio Ospite <ao2@ao2.it> Signed-off-by: NBob Peterson <rpeterso@redhat.com>
-