- 19 2月, 2013 37 次提交
-
-
由 nikolay@redhat.com 提交于
The 3ad machine state spinlock can be used before it is inititialized while doing bond_enslave() (and the port is being initialized) since port->slave is set before the lock is prepared, thus causing soft lock-ups and a multitude of other nasty bugs. [ Rename __initialize_port_locks() variable name to 'slave' -DaveM ] Signed-off-by: NNikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 nikolay@redhat.com 提交于
port->slave can be NULL since it's being initialized in bond_enslave thus dereferencing a NULL pointer in bond_3ad_update_lacp_rate() Also fix a minor bug, which could cause a port not to have AD_STATE_LACP_TIMEOUT since there's no sync between bond_3ad_update_lacp_rate() and bond_3ad_bind_slave(), by changing the read_lock to a write_lock_bh in bond_3ad_update_lacp_rate(). Signed-off-by: NNikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: NJay Vosburgh <fubar@us.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Larry Finger 提交于
Bastian Bittorf reported that some of the silent freezes on a Linksys WRT54G were due to overflow of the RX DMA ring buffer, which was created with 64 slots. That finding reminded me that I was seeing similar crashed on a netbook, which also has a relatively slow processor. After increasing the number of slots to 128, runs on the netbook that previously failed now worked; however, I found that 109 slots had been used in one test. For that reason, the number of slots is being increased to 256. Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Cc: Bastian Bittorf <bittorf@bluebottle.com> Cc: Stable <stable@vger.kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jitendra Kalsaria 提交于
Signed-off-by: NJitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shahed Shaikh 提交于
Delete the MAC address of a VM, from the adapter's embedded switch, after the VM had been migrated out of this adapter/server. Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NRajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: NJitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shahed Shaikh 提交于
Set gso_size to MSS obtained from adapter to avoid incorrect estimation of receive MSS, which would lead to delayed ACKs in some traffic patterns Example: Send two or three packets and wait for ack and only then send remaining packets. Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NJitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Himanshu Madhani 提交于
o Cleanly seperate 83xx Legacy interrupt handling code from 82xx o Update 83xx Legacy interrupt handling code to match with the spec Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NJitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sucheta Chakraborty 提交于
o Config interrupt is not needed for mailbox interrupts. Signed-off-by: NSucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: NJitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jitendra Kalsaria 提交于
Added detailed error messages for FW CDRP command failure Signed-off-by: NJitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://1984.lsi.us.es/nf-next由 David S. Miller 提交于
Pablo Neira Ayuso says: ==================== The following patchset contain updates for your net-next tree, they are: * Fix (for just added) connlabel dependencies, from Florian Westphal. * Add aliasing support for conntrack, thus users can either use -m state or -m conntrack from iptables while using the same kernel module, from Jozsef Kadlecsik. * Some code refactoring for the CT target to merge common code in revision 0 and 1, from myself. * Add aliasing support for CT, based on patch from Jozsef Kadlecsik. * Add one mutex per nfnetlink subsystem, from myself. * Improved logging for packets that are dropped by helpers, from myself. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 David S. Miller 提交于
Pull in 'net' to take in the bug fixes that didn't make it into 3.8-final. Also, deal with the semantic conflict of the change made to net/ipv6/xfrm6_policy.c A missing rt6->n neighbour release was added to 'net', but in 'net-next' we no longer cache the neighbour entries in the ipv6 routes so that change is not appropriate there. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pablo Neira Ayuso 提交于
Connection tracking helpers have to drop packets under exceptional situations. Currently, the user gets the following logging message in case that happens: nf_ct_%s: dropping packet ... However, depending on the helper, there are different reasons why a packet can be dropped. This patch modifies the existing code to provide more specific error message in the scope of each helper to help users to debug the reason why the packet has been dropped, ie: nf_ct_%s: dropping packet: reason ... Thanks to Joe Perches for many formatting suggestions. Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Eric Dumazet 提交于
net/ipv6/reassembly.c:82:72: warning: incorrect type in argument 3 (different base types) net/ipv6/reassembly.c:82:72: expected unsigned int [unsigned] [usertype] c net/ipv6/reassembly.c:82:72: got restricted __be32 [usertype] id Signed-off-by: NEric Dumazet <edumazet@google.com> Reported-by: NFengguang Wu <fengguang.wu@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next由 David S. Miller 提交于
John W. Linville says: ==================== This probably is the last big pull request for wireless bits for 3.9. Of course, I'm sure there will be a few stragglers here and there...surely a few bug fixes as well... :-) (In fact, I see that Johannes has already queued-up a few more for me while I was preparing this...) Included are a number of pulls... For mac80211-next, Johannes says: "The biggest change I have is undoubtedly Marco's mesh powersave implementation. Beyond that, I have a patch from Emmanuel to modify the DTIM period API in mac80211, scan improvements and a removal of some previous workaround code from Stanislaw, dynamic short slot time from Thomas and 64-bit station byte counters from Vladimir. I also made a number of changes myself, some related to WoWLAN, some auth/deauth improvements and most of them BSS list cleanups." "This time, I have relatively large number of fixes in various areas of the code (a memory leak in regulatory, an RX race in mac80211, the new radar checking caused a P2P device problem, some mesh issues with stations, an older bug in tracing and for kernel-doc) as well as a number of small new features. The biggest (in the diffstat) is my work on hidden SSID tracking." "Please pull to get * radar detection work from Simon * mesh improvements from Thomas * a connection monitoring/powersave fix from Wojciech * TDLS-related station management work from Jouni * VLAN crypto fixes from Michael Braun * CCK support in minstrel_ht from Felix * an SMPS (not SMSP, oops) related improvement in mac80211 (Emmanuel) * some WoWLAN work from Amitkumar Karwar: pattern match offset and a documentation fix * some WoWLAN work from myself (TCP connection wakeup feature API) * and a lot of VHT (and some HT) work (also from myself) And a number of more random cleanups/fixes. I merged mac80211/master to avoid a merge problem there." And regarding iwlwifi-next, Johannes says: "We continue work on our new driver, but I also have a WoWLAN and AP mode improvement for the previous driver and a change to use threaded interrupts to prepare us for working with non-PCIe devices." Regarding wl12xx, Luca says: "A few more patches intended for 3.9. Mostly some clean-ups I've been doing to make it easier to support device-tree. Also including one bug fix for wl12xx where the rates we advertise were wrong and an update in the wlconf structure to support newer firmwares." For the nfc-next bits, Samuel says: "This is the second NFC pull request for 3.9. We have: - A few pn533 fixes on top of Waldemar refactorization of the driver, one of them fixes target mode. - A new driver for Inside Secure microread chipset. It supports two physical layers: i2c and MEI. The MEI one depends on a patchset that's been sent to Greg Kroah-Hartman for inclusion into the 3.9 kernel [1]. The dependency is a KConfig one which means this code is not buildable as long as the MEI API is not usptream." "This 3rd NFC pull request for 3.9 contains a fix for the microread MEI physical layer support, as the MEI bus API changed. From the MEI code, we now pass the MEI id back to the driver probe routine, and we also pass a name and a MEI id table through the mei_bus_driver structure. A few renames as well like e.g. mei_bus_driver to mei_driver or mei_bus_client to mei_device in order to be closer to the driver model practices." For the ath6kl bits, Kalle says: "There's not anything special here, most of the patches are just code cleanup. The only functional changes are using the beacon interval from user space and fixing a crash which happens when inserting and removing the module in a loop." Also, I pulled the wireless tree in order to resolve some pending merge issues. On top of that, there is a bunch of work on brcmfmac that leads up to P2P support. Also, mwifiex, rtlwifi, and a variety of other drivers see some basic cleanups and minor enhancements. Please let me know if there are problems! ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andy King 提交于
Allow our own family as the protocol value for socket creation. Reported-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAndy King <acking@vmware.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andy King 提交于
Remove hypervisor-only socket option. Reported-by: NGerd Hoffmann <kraxel@redhat.com> Acked-by: NDmitry Torokhov <dtor@vmware.com> Signed-off-by: NAndy King <acking@vmware.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dmitry Torokhov 提交于
There isn't really a need to have a separate file for it. Acked-by: NAndy King <acking@vmware.com> Signed-off-by: NDmitry Torokhov <dtor@vmware.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dmitry Torokhov 提交于
This is the default behavior for a looooooong time. Acked-by: NAndy King <acking@vmware.com> Signed-off-by: NDmitry Torokhov <dtor@vmware.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Romain KUNTZ 提交于
Neighbor is cloned in xfrm6_fill_dst but seems to never be released. Neighbor entry should be released when XFRM6 dst entry is destroyed in xfrm6_dst_destroy, otherwise references may be kept forever on the device pointed by the neighbor entry. I may not have understood all the subtleties of XFRM & dst so I would be happy to receive comments on this patch. Signed-off-by: NRomain Kuntz <r.kuntz@ipflavors.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Gao feng 提交于
proc_net_remove has been replaced by remove_proc_entry. we can remove it now. Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Gao feng 提交于
proc_net_remove is only used to remove proc entries that under /proc/net,it's not a general function for removing proc entries of netns. if we want to remove some proc entries which under /proc/net/stat/, we still need to call remove_proc_entry. this patch use remove_proc_entry to replace proc_net_remove. we can remove proc_net_remove after this patch. Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Gao feng 提交于
proc_net_fops_create has been replaced by proc_create, we can remove it now. Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Gao feng 提交于
Right now, some modules such as bonding use proc_create to create proc entries under /proc/net/, and other modules such as ipv4 use proc_net_fops_create. It looks a little chaos.this patch changes all of proc_net_fops_create to proc_create. we can remove proc_net_fops_create after this patch. Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mugunthan V N 提交于
CPDMA interrupts are not properly acknowledged which leads to interrupt storm, only cpdma interrupt 0 is acknowledged in Davinci CPDMA driver. Changed cpdma_ctlr_eoi api to acknowledge 1 and 2 interrupts which are used for rx and tx respectively. Reported-by: NPantelis Antoniou <panto@antoniou-consulting.com> Signed-off-by: NMugunthan V N <mugunthanvnm@ti.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 John W. Linville 提交于
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem Conflicts: drivers/net/wireless/iwlwifi/dvm/tx.c drivers/net/wireless/ti/wlcore/sdio.c drivers/net/wireless/ti/wlcore/spi.c
-
由 Jiri Pirko 提交于
Change email for team driver maintainership. Signed-off-by: NJiri Pirko <jiri@resnulli.us> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
Upper case macros for various chip attributes are slightly difficult to read and are a bit out of characterto the other tg3_<foo> attribute functions. Convert: GET_ASIC_REV(tp->pci_chip_rev_id) -> tg3_asic_rev(tp) GET_CHIP_REV(tp->pci_chip_rev_id) -> tg3_chip_rev(tp) Remove: GET_METAL_REV(tp->pci_chip_rev_id) -> tg3_metal_rev(tp) (unused) Add: tg3_chip_rev_id(tp) for tp->pci_chip_rev_id so access styles are similar to tg3_asic_rev and tg3_chip_rev. These macros are not converted to static inline functions because gcc (tested with 4.7.2) is currently unable to optimize the object code it produces the same way and code is otherwise larger. Signed-off-by: NJoe Perches <joe@perches.com> Acked-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
It's the same value as tp->pci_chip_rev_id so use that instead. This makes all CHIPREV_ID_<foo> tests the same. Signed-off-by: NJoe Perches <joe@perches.com> Acked-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hauke Mehrtens 提交于
Without this patch I get many unaligned access warnings per packet, this patches fixes them all. This should improve performance on some systems like mips. Signed-off-by: NHauke Mehrtens <hauke@hauke-m.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 stephen hemminger 提交于
Same problem as IPv6 Signed-off-by: NStephen Hemminger <stephen@networkplumber.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 stephen hemminger 提交于
Should not use assignment in conditional: warning: suggest parentheses around assignment used as truth value [-Wparentheses] Problem introduced by: commit 14bbd6a5 Author: Pravin B Shelar <pshelar@nicira.com> Date: Thu Feb 14 09:44:49 2013 +0000 net: Add skb_unclone() helper function. Signed-off-by: NStephen Hemminger <stephen@networkplumber.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next由 David S. Miller 提交于
Jeff Kirsher says: ==================== This series contains updates to e1000, e1000e, igb, igbvf and ixgbe. The e1000, e1000e, igb and igbvf are single patch changes and the remaining 11 patches are all against ixgbe. The e1000 patch is a comment cleanup to align e1000 with the code commenting style for /drivers/net. It also contains a few other white space cleanups (i.e. fix lines over 80 char, remove unnecessary blank lines and fix the use of tabs/spaces). The e1000e patch from Koki (Fujitsu) adds a warning when link speed is downgraded due to SmartSpeed. The igb patch from Stefan (Red Hat) increases the timeout in the ethtool offline self-test because some i350 adapters would sometimes fail the self-test because link auto negotiation may take longer than the current 4 second timeout. The igbvf patch from Alex is meant to address several race issues that become possible because next_to_watch could possibly be set to a value that shows that the descriptor is done when it is not. In order to correct that we instead make next_to_watch a pointer that is set to NULL during cleanup, and set to the eop_desc after the descriptor rings have been written. The remaining patches for ixgbe are a mix of fixes and added support as well as some cleanup. Most notably is the added support for displaying the number of Tx/Rx channels via ethtool by Alex. Also Aurélien adds the ability for reading data from SFP+ modules over i2c for diagnostic monitoring. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ying Xue 提交于
When SOCK_REFCNT_DEBUG is enabled, below build error is met: kernel/sysctl_binary.o: In function `sk_refcnt_debug_release': include/net/sock.h:1025: multiple definition of `sk_refcnt_debug_release' kernel/sysctl.o:include/net/sock.h:1025: first defined here kernel/audit.o: In function `sk_refcnt_debug_release': include/net/sock.h:1025: multiple definition of `sk_refcnt_debug_release' kernel/sysctl.o:include/net/sock.h:1025: first defined here make[1]: *** [kernel/built-in.o] Error 1 make: *** [kernel] Error 2 So we decide to make sk_refcnt_debug_release static to eliminate the error. Signed-off-by: NYing Xue <ying.xue@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Cong Wang 提交于
They well deserve a separated unit. Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dave Young 提交于
In ehea.h the minimal entries is 2^7 - 1: #define EHEA_MIN_ENTRIES_QP 127 Thus change the module param description accordinglly Signed-off-by: NDave Young <dyoung@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Use ipv6_addr_hash() and a single jhash invocation. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux由 David S. Miller 提交于
Paul Gortmaker says: ==================== Two relatively small cleanup patches here, plus a reimplementation of the patch Neil had questions about[1] in the last development cycle. Tested on today's net-next, between 32 and 64 bit x86 machines using the server/client in tipc-utils, as usual. [1] http://patchwork.ozlabs.org/patch/204507/ ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 2月, 2013 3 次提交
-
-
由 Alexander Duyck 提交于
Recent changes have made it so that MAX_SKB_FRAGS is now never less than 16. As a result we were seeing issues on systems with 64K pages as it would cause DESC_NEEDED to increase to 68, and we would need over 136 descriptors free before clean_tx_irq would wake the queue. This patch makes it so that DESC_NEEDED is always MAX_SKB_FRAGS + 4. This should prevent any possible deadlocks on the systems with 64K pages as we will now only require 42 descriptors to wake. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Emil Tantilov 提交于
This patch makes sure that TXDCTL.WTHRESH is set to 1 when BQL is enabled and EITR is set to more than 100k interrupts per second to avoid Tx timeouts. Signed-off-by: NEmil Tantilov <emil.s.tantilov@intel.com> Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Aurélien Guillaume 提交于
This patch adds support for reading data from SFP+ modules over i2c. Signed-off-by: NAurélien Guillaume <footplus@gmail.com> Signed-off-by: NEmil Tantilov <emil.s.tantilov@intel.com> Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-