- 24 7月, 2014 2 次提交
-
-
由 Dave Airlie 提交于
This chunk was no longer required from what I can see, or at least it is doing the wrong thing, as I confused intel_connector->encoder and connector->encoder. Drop it for now, to remove the warnings at bootup. Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
When I moved the irq disable down to after display disable, I didn't realise the gt suspend also required irqs off, so move it down as well. Fixes WARNs seen at suspend/resume time. v2: moved the rps flush down as well. Tested-by: NPaulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 23 7月, 2014 2 次提交
-
-
git://ftp.arm.linux.org.uk/~rmk/linux-arm由 Dave Airlie 提交于
pull the msm patch in. * 'component-for-drm' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: drm: msm: update to use component match support
-
git://ftp.arm.linux.org.uk/~rmk/linux-arm由 Dave Airlie 提交于
Merge armada changes, I've confirmed the componenet changes are same as in Greg's tree. * 'drm-armada-devel' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: drm/armada: register crtc with port drm/armada: permit CRTCs to be registered as separate devices dt-bindings: add Marvell Dove LCD controller documentation drm/armada: update Armada 510 (Dove) to use "ext_ref_clk1" as the clock drm/armada: convert to componentized support drm: add of_graph endpoint helper to find possible CRTCs component: fix bug with legacy API drm/armada: make variant a CRTC thing drm/armada: move variant initialisation to CRTC init drm/armada: use number of CRTCs registered drm/armada: move IRQ handling into CRTC component: add support for component match array component: ignore multiple additions of the same component component: fix missed cleanup in case of devres failure
-
- 22 7月, 2014 15 次提交
-
-
由 Chris Wilson 提交于
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
fixes sparse warning, and removes potentially dangerous name from namespace. Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
fixes sparse warning. Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Russell King 提交于
Regular randconfig nightly testing has detected problems with omapdrm. omapdrm fails to build when the kernel is built to support 64-bit DMA addresses and/or 64-bit physical addresses due to an assumption about the width of these types. Use %pad to print DMA addresses, rather than %x or %Zx (which is even more wrong than %x). Avoid passing a uint32_t pointer into a function which expects dma_addr_t pointer. drivers/gpu/drm/omapdrm/omap_plane.c: In function 'omap_plane_pre_apply': drivers/gpu/drm/omapdrm/omap_plane.c:145:2: error: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Werror=format] drivers/gpu/drm/omapdrm/omap_plane.c:145:2: error: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Werror=format] make[5]: *** [drivers/gpu/drm/omapdrm/omap_plane.o] Error 1 drivers/gpu/drm/omapdrm/omap_gem.c: In function 'omap_gem_get_paddr': drivers/gpu/drm/omapdrm/omap_gem.c:794:4: error: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'dma_addr_t' [-Werror=format] drivers/gpu/drm/omapdrm/omap_gem.c: In function 'omap_gem_describe': drivers/gpu/drm/omapdrm/omap_gem.c:991:4: error: format '%Zx' expects argument of type 'size_t', but argument 7 has type 'dma_addr_t' [-Werror=format] drivers/gpu/drm/omapdrm/omap_gem.c: In function 'omap_gem_init': drivers/gpu/drm/omapdrm/omap_gem.c:1470:4: error: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Werror=format] make[5]: *** [drivers/gpu/drm/omapdrm/omap_gem.o] Error 1 drivers/gpu/drm/omapdrm/omap_dmm_tiler.c: In function 'dmm_txn_append': drivers/gpu/drm/omapdrm/omap_dmm_tiler.c:226:2: error: passing argument 3 of 'alloc_dma' from incompatible pointer type [-Werror] make[5]: *** [drivers/gpu/drm/omapdrm/omap_dmm_tiler.o] Error 1 make[5]: Target `__build' not remade because of errors. make[4]: *** [drivers/gpu/drm/omapdrm] Error 2 Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Russell King 提交于
Regular nightly randconfig build testing discovered these warnings: drivers/gpu/drm/bochs/bochs_drv.c:100:12: warning: 'bochs_pm_suspend' defined but not used [-Wunused-function] drivers/gpu/drm/bochs/bochs_drv.c:117:12: warning: 'bochs_pm_resume' defined but not used [-Wunused-function] Fix these by adding the same condition that SET_SYSTEM_SLEEP_PM_OPS() uses. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Russell King 提交于
Regular nightly randconfig build testing discovered these warnings: drivers/gpu/drm/cirrus/cirrus_drv.c:79:12: warning: 'cirrus_pm_suspend' defined but not used [-Wunused-function] drivers/gpu/drm/cirrus/cirrus_drv.c:96:12: warning: 'cirrus_pm_resume' defined but not used [-Wunused-function] Fix these by adding the same condition that SET_SYSTEM_SLEEP_PM_OPS() uses. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Russell King 提交于
drivers/gpu/drm/shmobile/shmob_drm_drv.c:300:5: warning: "CONFIG_PM_SLEEP" is not defined [-Wundef] Always use #ifdef with CONFIG symbols, never just bare #if Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Russell King 提交于
drivers/gpu/drm/rcar-du/rcar_du_drv.c:190:5: warning: "CONFIG_PM_SLEEP" is not defined [-Wundef] Always use #ifdef with CONFIG symbols, never just bare #if Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Jean-Francois Moine 提交于
In tda998x_encoder_destroy(), priv->cec is never NULL, so, remove its test. Signed-off-by: NJean-Francois Moine <moinejf@free.fr> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
Merge branch 'drm-i915-mst-support-next' of git://people.freedesktop.org/~airlied/linux into drm-next Evil super powers maintainer abuse, get i915 mst support into -next. * 'drm-i915-mst-support-next' of git://people.freedesktop.org/~airlied/linux: drm/i915: mst topology dumper in debugfs (v0.2) drm/i915: add DP 1.2 MST support (v0.7) drm/i915: split conversion function out into separate function drm/i915: check connector->encoder before using it. i915: split some DP modesetting code into a separate function drm/i915: add some registers need for displayport MST support.
-
由 Dave Airlie 提交于
use the mst helper code to dump the topology in debugfs. v0.2: drop is_mst check - as we want to dump other info Reviewed-by: NTodd Previte <tprevite@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
This adds DP 1.2 MST support on Haswell systems. Notes: a) this reworks irq handling for DP MST ports, so that we can avoid the mode config locking in the current hpd handlers, as we need to process up/down msgs at a better time. Changes since v0.1: use PORT_PCH_HOTPLUG to detect short vs long pulses add a workqueue to deal with digital events as they can get blocked on the main workqueue beyong mode_config mutex fix a bunch of modeset checker warnings acks irqs in the driver cleanup the MST encoders Changes since v0.2: check irq status again in work handler move around bring up and tear down to fix DPMS on/off use path properties. Changes since v0.3: updates for mst apis more state checker fixes irq handling improvements fbcon handling support improved reference counting of link - fixes redocking. Changes since v0.4: handle gpu reset hpd reinit without oopsing check link status on HPD irqs fix suspend/resume Changes since v0.5: use proper functions to get max link/lane counts fix another checker backtrace - due to connectors disappearing. set output type in more places fro, unknown->displayport don't talk to devices if no HPD asserted check mst on short irqs only check link status properly rebase onto prepping irq changes. drop unsued force_act Changes since v0.6: cleanup unused struct entry. [airlied: fix some sparse warnings]. Reviewed-by: NTodd Previte <tprevite@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Thierry Reding 提交于
sparse complains about these functions missing a prototype, but looking closer they aren't (and likely not supposed to be) used outside of this source file, so they can be made static. Signed-off-by: NThierry Reding <treding@nvidia.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Thierry Reding 提交于
The final parameter to ttm_bo_reserve() is a pointer, therefore callers should use NULL instead of 0. Fixes a bunch of sparse warnings of this type: warning: Using plain integer as NULL pointer Signed-off-by: NThierry Reding <treding@nvidia.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Thierry Reding 提交于
The drm_copy_field() function copies strings into userspace buffers, so the first parameter needs to have a __user annotation to avoid warnings from the sparse checker. Signed-off-by: NThierry Reding <treding@nvidia.com> Reviewed-by: NDavid Herrmann <dh.herrmann@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 21 7月, 2014 6 次提交
-
-
由 Dave Airlie 提交于
for MST I need to reuse this, so just move it now. Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
DP MST will need connectors that aren't connected to specific encoders, add some checks in advance to avoid oopses. Reviewed-by: NTodd Previte <tprevite@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
this is just prep work for mst support. Reviewed-by: NTodd Previte <tprevite@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
These are just from the Haswell spec. Reviewed-by: NTodd Previte <tprevite@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Sachin Kamat 提交于
Makes the code a bit more readable. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Signed-off-by: NSachin Kamat <sachin.kamat@samsung.com> Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
Not enough brown paper bags, you'll have to share one. (oops below). The initial match condition code was racy (locking is coming I hear). then along came: cd234b0b drm/i915: Do not dereference NULL crtc or fb until after checking Chris made an attempt to fix it, Ben "reviewed" it. Daniel merged it. Then drm/i915: Make use of intel_fb_obj() (v2) 2ff8fde1 made it worse by removing the obj check later. All in all, my laptop can't barely turn off the display without hitting this. Posted to #intel-gfx out of niceness, but I've merged this already into drm-next. Here's an oops. [ 11.528185] BUG: unable to handle kernel NULL pointer dereference at 00000000000000d0 [ 11.528233] IP: [<ffffffffa0161fde>] intel_edp_psr_match_conditions+0x1e/0x2e0 [i915] [ 11.528294] PGD 35bc0067 PUD c997c067 PMD 0 [ 11.528321] Oops: 0000 [#1] SMP [ 11.528916] CPU: 3 PID: 244 Comm: kworker/3:2 Not tainted 3.16.0-rc4+ #17 [ 11.528949] Hardware name: LENOVO 20ARS25701/20ARS25701, BIOS GJET72WW (2.22 ) 02/21/2014 [ 11.529004] Workqueue: events intel_edp_psr_work [i915] [ 11.529031] task: ffff8803079fdaa0 ti: ffff8803079c4000 task.ti: ffff8803079c4000 [ 11.529067] RIP: 0010:[<ffffffffa0161fde>] [<ffffffffa0161fde>] intel_edp_psr_match_conditions+0x1e/0x2e0 [i915] [ 11.529129] RSP: 0018:ffff8803079c7d40 EFLAGS: 00010246 [ 11.529155] RAX: 0000000000000000 RBX: ffff88030c11c000 RCX: c000000000000000 [ 11.529189] RDX: 0000000000000001 RSI: 1df0000000000000 RDI: ffff88030c1190d8 [ 11.529222] RBP: ffff8803079c7d60 R08: ffffffff82691140 R09: 0000000000000000 [ 11.529256] R10: ffff8803079fdaa0 R11: 3e00000000000000 R12: ffff88030c11c728 [ 11.529290] R13: ffff88030c1190d8 R14: ffff88031e2d8e00 R15: 00000000000000c0 [ 11.529324] FS: 0000000000000000(0000) GS:ffff88031e2c0000(0000) knlGS:0000000000000000 [ 11.529361] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 11.529389] CR2: 00000000000000d0 CR3: 00000000c8d9d000 CR4: 00000000001407e0 [ 11.529423] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 11.529457] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 11.529489] Stack: [ 11.529500] ffff88030c119000 ffff88030c11c728 ffff88030c1190d8 ffff88031e2d8e00 [ 11.529541] ffff8803079c7d88 ffffffffa01679b2 ffff880035b29a80 ffff880307909f00 [ 11.529583] ffff88031e2d4740 ffff8803079c7df8 ffffffff810a78ab ffffffff810a7849 [ 11.529624] Call Trace: [ 11.529654] [<ffffffffa01679b2>] intel_edp_psr_work+0x52/0x90 [i915] [ 11.529689] [<ffffffff810a78ab>] process_one_work+0x1db/0x540 [ 11.529719] [<ffffffff810a7849>] ? process_one_work+0x179/0x540 [ 11.529750] [<ffffffff810a81ed>] worker_thread+0x11d/0x520 [ 11.529779] [<ffffffff810a80d0>] ? create_and_start_worker+0x60/0x60 [ 11.529810] [<ffffffff810aeb04>] kthread+0xe4/0x100 [ 11.529836] [<ffffffff810aea20>] ? kthread_create_on_node+0x200/0x200 [ 11.529870] [<ffffffff81705ebc>] ret_from_fork+0x7c/0xb0 [ 11.529896] [<ffffffff810aea20>] ? kthread_create_on_node+0x200/0x200 [ 11.529926] Code: ba 31 13 f0 c9 85 f6 75 84 eb d0 66 90 0f 1f 44 00 00 55 48 89 e5 41 56 41 55 41 54 53 48 8b 87 68 ff ff ff 48 8b 9f 28 ff ff ff <48> 8b 80 d0 00 00 00 4c 8b 63 28 48 8b 40 48 48 85 c0 0f 84 1a [ 11.530110] RIP [<ffffffffa0161fde>] intel_edp_psr_match_conditions+0x1e/0x2e0 [i915] [ 11.530163] RSP <ffff8803079c7d40> [ 11.530180] CR2: 00000000000000d0 Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 19 7月, 2014 2 次提交
-
-
git://anongit.freedesktop.org/drm-intel由 Dave Airlie 提交于
misc core patches. * tag 'topic/core-stuff-2014-07-18' of git://anongit.freedesktop.org/drm-intel: drm: Check for connection_mutex in drm_select_eld drm/dp-mst-helper: Don't use uninitialized fields of the sideband message header drm/dp-mst-helper: Avoid reading uninitialized value drm/plane-helper: Use proper plane init function drivers/gpu/drm/drm_buffer.c: remove unnecessary null test before kfree drm: Fix function names in kerneldoc
-
git://anongit.freedesktop.org/drm-intel由 Dave Airlie 提交于
- fbc improvements when stolen memory is tight (Ben) - cdclk handling improvements for vlv/chv (Ville) - proper fix for stuck primary planes on gmch platforms with cxsr (Imre&Ebgert Eich) - gen8 hw semaphore support (Ben) - more execlist prep work from Oscar Mateo - locking fixes for primary planes (Matt Roper) - code rework to support runtime pm for dpms on hsw/bdw (Paulo, Imre & me), but not yet enabled because some fixes from Paulo haven't made the cut - more gpu boost tuning from Chris - as usual piles of little things all over * tag 'drm-intel-next-2014-07-11' of git://anongit.freedesktop.org/drm-intel: (93 commits) drm/i915: Make the RPS interrupt generation mask handle the vlv wa drm/i915: Move RPS evaluation interval counters to i915->rps drm/i915: Don't cast a pointer to void* unnecessarily drm/i915: don't read LVDS regs at compute_config time drm/i915: check the power domains in intel_lvds_get_hw_state() drm/i915: check the power domains in ironlake_get_pipe_config() drm/i915: don't skip shared DPLL assertion on LPT drm/i915: Only touch WRPLL hw state in enable/disable hooks drm/i915: Switch to common shared dpll framework for WRPLLs drm/i915: ->enable hook for WRPLLs drm/i915: ->disable hook for WRPLLs drm/i915: State readout support for WRPLLs drm/i915: add POWER_DOMAIN_PLLS drm/i915: Document that the pll->mode_set hook is optional drm/i915: Basic shared dpll support for WRPLLs drm/i915: Precompute static ddi_pll_sel values in encoders drm/i915: BDW also has special-purpose DP DDI clocks drm/i915: State readout and cross-checking for ddi_pll_sel drm/i915: Move ddi_pll_sel into the pipe config drm/i915: Add a debugfs file for the shared dpll state ...
-
- 18 7月, 2014 13 次提交
-
-
由 Sean Paul 提交于
drm_select_eld should check for mode_config.connection_mutex as well as mode_config.mutex: We need that since this function checks conector->encoder links. Signed-off-by: NSean Paul <seanpaul@chromium.org> [danvet: Pimp commit message slightly.] Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Damien Lespiau 提交于
We could be using uninitialized fields of the header in drm_dp_encode_sideband_msg_hdr(), for instance hdr->somt is set to 1 in the first patcket but never set to 0 otherwise. Always clear the header at the start then. Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Damien Lespiau 提交于
A static analysis tool tells me that we could try to read an uninitialized 'ret' value. Plug that. Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Matt Roper 提交于
drm_plane_init() (the legacy plane initialization function) takes a bool as its final parameter; originally this indicated whether a plane was 'private' to the driver (before the DRM core understood non-overlay planes), now it indicates whether the plane is a primary plane (private planes were used by some drivers to represent primary planes internally). The newer drm_universal_plane_init() take an 'enum drm_plane_type' as its final parameter to allow the caller to specify the specific plane type desired (primary, cursor, or overlay). Due to a rebasing mistake, the primary plane helper is currently passing DRM_PLANE_TYPE_PRIMARY (enum value = 1) for drm_plane_init()'s boolean 'is_primary' parameter. This winds up giving the correct behavior since DRM_PLANE_TYPE_PRIMARY evaluates as true, but is confusing to anyone reading the code since we're passing an enum value (one of three possible values) for a boolean parameter. Replace the primary plane helper's call to drm_plane_init() with drm_universal_plane_init() so that the parameter and value types match up as expected. Signed-off-by: NMatt Roper <matthew.d.roper@intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Fabian Frederick 提交于
This patch removes special case of last element and loops from idx to 0. Cc: David Airlie <airlied@linux.ie> Cc: dri-devel@lists.freedesktop.org Signed-off-by: NFabian Frederick <fabf@skynet.be> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Thierry Reding 提交于
The drm_property_create_enum(), drm_property_create_bitmask() and drm_property_create_range() contain the wrong name in the kerneldoc comment. This is probably simply a copy/paste mistake. Signed-off-by: NThierry Reding <treding@nvidia.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Rob Clark 提交于
Signed-off-by: NRob Clark <robdclark@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Rob Clark 提交于
Signed-off-by: NRob Clark <robdclark@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Rob Clark 提交于
Signed-off-by: NRob Clark <robdclark@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Rob Clark 提交于
Signed-off-by: NRob Clark <robdclark@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Rob Clark 提交于
Signed-off-by: NRob Clark <robdclark@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Rob Clark 提交于
Signed-off-by: NRob Clark <robdclark@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Rob Clark 提交于
Signed-off-by: NRob Clark <robdclark@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-