- 26 6月, 2006 1 次提交
-
-
由 Adrian Bunk 提交于
remove the following unused hooks: - cx88-blackbird.c: cx88_ioctl_hook() - cx88-blackbird.c: cx88_ioctl_translator() make the following needlessly global functions static: - cx88-tvaudio.c: cx88_detect_nicam() remove the following unused EXPORT_SYMBOL's: - cx88-cards.c: cx88_bcount - cx88-cards.c: cx88_subids - cx88-cards.c: cx88_idcount - cx88-cards.c: cx88_card_list - cx88-cards.c: cx88_card_setup - cx88-core.c: cx88_start_audio_dma - cx88-core.c: cx88_stop_audio_dma - cx88-i2c.c: cx88_i2c_init Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 25 6月, 2006 13 次提交
-
-
由 Michael Krufky 提交于
Add support for FusionHDTV 3 Gold (original revision), using the card definition for FusionHDTV3 Gold-Q Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Ricardo Cerqueira 提交于
The description of the card has been updated to it's full name/model. The tuner has also been switched to a more compatible one (radio wasn't working, now it is) Signed-off-by: NRicardo Cerqueira <v4l@cerqueira.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Malcolm Valentine 提交于
Add DVB-T and PAL-G television support for Winfast DTV2000H Signed-off-by: NMalcolm Valentine <farkit@iinet.net.au> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
- Enabled s-video and composite video inputs. - Updated comments to reflect the current support for this card. Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Ricardo Cerqueira 提交于
Added support for a new cx88 card, including it's remote Signed-off-by: NRicardo Cerqueira <v4l@cerqueira.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Angelo Marconi 提交于
- Add support for ProLink Pixelview Playtv@P7000 Raw video and MPEG encoded video confirmed to work properly. SVideo, Composite and FM inputs are untested - disabled for now. Signed-off-by: NAngelo Marconi <am@massalombarda.net> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
Added autodetection for PCI subsystem id 1822:0019 to use the card definition for CX88_BOARD_DNTV_LIVE_DVB_T_PRO Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
- clear I2SIN to deliver the audio stream to the cx23416 mpeg encoder. - enable blackbird support on the KWorld HardwareMpegTV XPert Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Valentin Zagura 提交于
This patch adds support for KWorld MCE 200 Deluxe. Raw video is working perfectly, MPEG capture using cx88-blackbird is also working, but the quality could be improved. svideo and radio until they can be tested also. Signed-off-by: NValentin Zagura <puthre@gmail.com> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
- new cards should always be added to the end of the list. Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Rusty Scott 提交于
Added card definitions for the pcHDTV HD5500 ATSC/QAM card Signed-off-by: NRusty Scott <rustys@ieee.org> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 13 5月, 2006 1 次提交
-
-
由 Trent Piepho 提交于
It looks like the HD3000 was prototyped with the 7610 tuner when the driver was developed, but the cards appear to have always shipped with the 7612 tuner and the driver was never adjusted for it. The definition needs to be corrected. - The HD-3000 was prototyped with a Thomson DTT7610, but production versions used a DTT7612 tuner. - This patch changes both dvb-pll settings and V4L tuner type. Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 22 3月, 2006 3 次提交
-
-
由 Michael Krufky 提交于
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Matheus Izvekov 提交于
This patch changes the gpio0 values for the card CX88_BOARD_PROLINK_PLAYTVPVR to the ones observed using RegSpy from the dscaler project. Signed-off-by: NMatheus Izvekov <mizvekov@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Marcin Rudowski 提交于
Old values generally works in A2 mono, but new ones allows: - detect and use Nicam stereo - mute in tv - use radio FM Signed-off-by: NMarcin Rudowski <mar_rud@poczta.onet.pl> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 08 3月, 2006 3 次提交
-
-
由 Michael Krufky 提交于
- The tuner used in DViCO FusionHDTV DVB-T hybrid is made by Thomson - renamed tuner and dvb_pll structs accordingly Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Chris Pascoe 提交于
The init_data array is never changed and need not be on the stack. Turn it into a static variable. Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NChris Pascoe <c.pascoe@itee.uq.edu.au> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Chris Pascoe 提交于
Add support for the FE6600 tuner used on the DVB-T Hybrid board. Add support for the Zarlink ZL10353 DVB-T demodulator, which supersedes the MT352, used on the DViCO FusionHDTV DVB-T Hybrid and later model Plus boards. Signed-off-by: NChris Pascoe <c.pascoe@itee.uq.edu.au> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 27 2月, 2006 4 次提交
-
-
由 Michael Krufky 提交于
Make buffer a static const Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
Standard video using the cx88 broadcast decoder is working, but blackbird isn't working yet, audio is only working correctly for television mode. S-Video and Composite are working for video-only, so I have them disabled for now. Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
- KWorld HardwareMpegTV XPert must set gpio2 Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
- add radio support for KWorld HardwareMpegTV XPert - fix GPIO settings for tv and radio Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 07 2月, 2006 1 次提交
-
-
由 Michael Krufky 提交于
- Add initial support for KWorld HardwareMpegTV XPert. - uses silicon tuner: tda8290 + tda8275 - standard video using cx88 broadcast decoder is working. - blackbird mpeg encoder support (cx23416) not yet working. - FM radio untested. - audio is only working correctly in television mode, all other modes disabled. Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 24 1月, 2006 3 次提交
-
-
由 Ian Pickworth 提交于
- Recognise Hauppauge card #34519 Signed-off-by: NIan Pickworth <ian@pickworth.me.uk> Signed-off-by: NMichael Krufky <mkrufky@m1k.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Ian Pickworth 提交于
- Recognise Hauppauge card #34519 Signed-off-by: NIan Pickworth <ian@pickworth.me.uk> Signed-off-by: NMichael Krufky <mkrufky@m1k.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
- Add PCI ID for DigitalNow DVB-T Dual, rebranded DViCO FusionHDTV DVB-T Dual. Signed-off-by: NMichael Krufky <mkrufky@m1k.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 23 1月, 2006 1 次提交
-
-
由 Michael Krufky 提交于
- Add PCI ID for DigitalNow DVB-T Dual, rebranded DViCO FusionHDTV DVB-T Dual. Signed-off-by: NMichael Krufky <mkrufky@m1k.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 12 1月, 2006 1 次提交
-
-
由 Michael Krufky 提交于
- Add PCI ID for UltraView DVB-T Plus,rebranded DViCO FusionHDTV DVB-T Plus Signed-off-by: NMichael Krufky <mkrufky@m1k.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 10 1月, 2006 9 次提交
-
-
由 Chris Pascoe 提交于
- Clean up a recently introduced spaces vs tabs whitespace problem. Signed-off-by: NChris Pascoe <c.pascoe@itee.uq.edu.au> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Chris Pascoe 提交于
- Support for DVB reception on the PCI half of the DViCO DVB-T Dual Digital. Signed-off-by: NChris Pascoe <c.pascoe@itee.uq.edu.au> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Manenti Marco 提交于
- Add Kworld/Vstream Xpert DVB-T card with cx22702 tuner. Signed-off-by: NManenti Marco <marco_manenti@colman.it> Signed-off-by: NNickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Chris Pascoe 提交于
- Added support for VP-3054 (aka DigitalNow DNTV Live! DVB-T Pro!). - This board has a secondary I2C bus and remote control. - Added a new module to handle secondary I2C bus on this board. Signed-off-by: NChris Pascoe <c.pascoe@itee.uq.edu.au> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Michael Krufky 提交于
- Corrected Thomson DTT 7611 tuner programming, based on spec sheet - renamed to Thomson DTT 761x - applies to DTT 7611 7611A 7612 7613 7613A 7614 7615 7615A (DTT 7610 is similar, but slightly different programming) - corrected frequency ranges for analog and digital modes Signed-off-by: NMichael Krufky <mkrufky@m1k.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Steven Toth 提交于
- This patch adds eeprom awareness for the Roslyn. In effect, the blackbird will query the tuner V4L2_STD_xxxx definitions to determine whether it's connected to a NTSC or PAL tuner. Based on that, various default values will change for blackbird encoding. - Fixes back panel SVIDEO/COMPOSITE with audio, work properly. - Fixes a problem with lip sync issues, due to bad framerate vs audio rate assumptions. - Fixed a problem with the GPIO configuration in cx88-cards. - Removed the comments in cx88-cards that made no sense. Signed-off-by: NSteven Toth <stoth@hauppauge.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Steven Toth 提交于
- Add support for another Nova-T-PCI PCI subdevice 0x9001 Signed-off-by: NSteven Toth <stoth@hauppauge.com> Signed-off-by: NMichael Krufky <mkrufky@m1k.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Steven Toth 提交于
- Add support for the Hauppauge HVR1100 and HVR1100-LP products. - Add i2c_gate_ctrl callback function to dvb_frontend_ops struct. Signed-off-by: NSteven Toth <stoth@hauppauge.com> Signed-off-by: NMichael Krufky <mkrufky@m1k.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Vadim Catana 提交于
- Add support for KWorld DVB-S 100, based on the same chips as Hauppauge Nova-S Plus (CX23883/CX24123/CX24109), without the Intersil ISL6421, which is used for LNB control. - LNB voltage and tone are controled by LNBDC and LNBTone bits from register 0x29 of the CX24123 demodulator. - The MO_GP0_IO register from CX23883 is used to turn LNB power on and off. Signed-off-by: NVadim Catana <skystar@moldova.cc> Acked-by: NJohannes Stezenbach <js@linuxtv.org> Signed-off-by: NMichael Krufky <mkrufky@m1k.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-