Commit 5622f295 ("x86, perf_counter, bts: Optimize BTS overflow
handling") removed the regs field from struct perf_sample_data and
added a regs parameter to perf_counter_overflow().  This breaks the
build on powerpc (and Sparc) as reported by Sachin Sant:

  arch/powerpc/kernel/perf_counter.c: In function 'record_and_restart':
  arch/powerpc/kernel/perf_counter.c:1165: error: unknown field 'regs' specified in initializer

This adjusts arch/powerpc/kernel/perf_counter.c to correspond with the
new struct perf_sample_data and perf_counter_overflow().

[ v2: also fix Sparc, Markus Metzger <markus.t.metzger@intel.com> ]
Reported-by: NSachin Sant <sachinp@in.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Cc: Markus Metzger <markus.t.metzger@intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: benh@kernel.crashing.org
Cc: linuxppc-dev@ozlabs.org
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <19127.8400.376239.586120@drongo.ozlabs.ibm.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Sysbench thinks SD_BALANCE_WAKE is too agressive and kbuild doesn't
really mind too much, SD_BALANCE_NEWIDLE picks up most of the
slack.

On a dual socket, quad core, dual thread nehalem system:

sysbench (--num_threads=16):

 SD_BALANCE_WAKE-: 13982 tx/s
 SD_BALANCE_WAKE+: 15688 tx/s

kbuild (-j16):

 SD_BALANCE_WAKE-: 47.648295846  seconds time elapsed   ( +-   0.312% )
 SD_BALANCE_WAKE+: 47.608607360  seconds time elapsed   ( +-   0.026% )

(same within noise)
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Make the idle balancer more agressive, to improve a
x264 encoding workload provided by Jason Garrett-Glaser:

 NEXT_BUDDY NO_LB_BIAS
 encoded 600 frames, 252.82 fps, 22096.60 kb/s
 encoded 600 frames, 250.69 fps, 22096.60 kb/s
 encoded 600 frames, 245.76 fps, 22096.60 kb/s

 NO_NEXT_BUDDY LB_BIAS
 encoded 600 frames, 344.44 fps, 22096.60 kb/s
 encoded 600 frames, 346.66 fps, 22096.60 kb/s
 encoded 600 frames, 352.59 fps, 22096.60 kb/s

 NO_NEXT_BUDDY NO_LB_BIAS
 encoded 600 frames, 425.75 fps, 22096.60 kb/s
 encoded 600 frames, 425.45 fps, 22096.60 kb/s
 encoded 600 frames, 422.49 fps, 22096.60 kb/s

Peter pointed out that this is better done via newidle_idx,
not via LB_BIAS, newidle balancing should look for where
there is load _now_, not where there was load 2 ticks ago.

Worst-case latencies are improved as well as no buddies
means less vruntime spread. (as per prior lkml discussions)

This change improves kbuild-peak parallelism as well.
Reported-by: NJason Garrett-Glaser <darkshikari@gmail.com>
Signed-off-by: NMike Galbraith <efault@gmx.de>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1253011667.9128.16.camel@marge.simson.net>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

When merging select_task_rq_fair() and sched_balance_self() we lost
the use of wake_idx, restore that and set them to 0 to make wake
balancing more aggressive.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The problem with wake_idle() is that is doesn't respect things like
cpu_power, which means it doesn't deal well with SMT nor the recent
RT interaction.

To cure this, it needs to do what sched_balance_self() does, which
leads to the possibility of merging select_task_rq_fair() and
sched_balance_self().

Modify sched_balance_self() to:

  - update_shares() when walking up the domain tree,
    (it only called it for the top domain, but it should
     have done this anyway), which allows us to remove
    this ugly bit from try_to_wake_up().

  - do wake_affine() on the smallest domain that contains
    both this (the waking) and the prev (the wakee) cpu for
    WAKE invocations.

Then use the top-down balance steps it had to replace wake_idle().

This leads to the dissapearance of SD_WAKE_BALANCE and
SD_WAKE_IDLE_FAR, with SD_WAKE_IDLE replaced with SD_BALANCE_WAKE.

SD_WAKE_AFFINE needs SD_BALANCE_WAKE to be effective.

Touch all topology bits to replace the old with new SD flags --
platforms might need re-tuning, enabling SD_BALANCE_WAKE
conditionally on a NUMA distance seems like a good additional
feature, magny-core and small nehalem systems would want this
enabled, systems with slow interconnects would not.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Remove the reliance on a staticly defined NVRAM size, allowing
platforms to support NVRAMs with sizes differing from the standard.

A fall back value is provided for platforms not supporting this extension.
Signed-off-by: NMartyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

That code uses dma_mapping_error() with a NULL device, which is
a bad idea :-) The proper fix might be to start using some kind
of pseudo device for all these low level mappings with the
hypervisor but that will be for another day. Since it directly
calls into the low level iommu code, I see no problem in having
it directly test against DMA_ERROR_CODE instead of using the
accessors with a NULL argument for now.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Also remove a duplicate setting of it in the context switch path
on BookE.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Michael Ellerman reported stack-frame size warnings being produced
for power_check_constraints(), which uses an 8*8 array of u64 and
two 8*8 arrays of unsigned long, which are currently allocated on the
stack, along with some other smaller variables.  These arrays come
to 1.5kB on 64-bit or 1kB on 32-bit, which is a bit too much for the
stack.

This fixes the problem by putting these arrays in the existing
per-cpu cpu_hw_counters struct.  This is OK because two of the call
sites have interrupts disabled already; for the third call site we
use get_cpu_var, which disables preemption, so we know we won't
get a context switch while we're in power_check_constraints().
Note that power_check_constraints() can be called during context
switch but is not called from interrupts.
Reported-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Cc: <stable@kernel.org)
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Currently there is a bug where if you use oprofile on a pSeries
machine, then use perf_counters, then use oprofile again, oprofile
will not work correctly; it will lose the PMU configuration the next
time the hypervisor does a partition context switch, and thereafter
won't count anything.

Maynard Johnson identified the sequence causing the problem:
- oprofile setup calls ppc_enable_pmcs(), which calls
  pseries_lpar_enable_pmcs, which tells the hypervisor that we want
  to use the PMU, and sets the "PMU in use" flag in the lppaca.
  This flag tells the hypervisor whether it needs to save and restore
  the PMU config.
- The perf_counter code sets and clears the "PMU in use" flag directly
  as it context-switches the PMU between tasks, and leaves it clear
  when it finishes.
- oprofile setup, called for a new oprofile run, calls ppc_enable_pmcs,
  which does nothing because it has already been called.  In particular
  it doesn't set the "PMU in use" flag.

This fixes the problem by arranging for ppc_enable_pmcs to always set
the "PMU in use" flag.  It makes the perf_counter code call
ppc_enable_pmcs also rather than calling the lower-level function
directly, and removes the setting of the "PMU in use" flag from
pseries_lpar_enable_pmcs, since that is now done in its caller.

This also removes the declaration of pasemi_enable_pmcs because it
isn't defined anywhere.
Reported-by: NMaynard Johnson <mpjohn@us.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Cc: <stable@kernel.org)
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The following commit introduced a compile error since it removed
the implementation of smp_85xx_basic_setup:

commit 77c0a700
Author: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date:   Fri Aug 28 14:25:04 2009 +1000

    powerpc: Properly start decrementer on BookE secondary CPUs

Make it so that smp_ops probe() and setup_cpu() can be set to NULL.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The OF helpers look like nanodoc but are missing the header. Fix this and a
typo (s/nad/and/) while we are here.
Signed-off-by: NWolfram Sang <w.sang@pengutronix.de>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Remove kvm_cpu_has_interrupt() and kvm_arch_interrupt_allowed() from
interface between general code and arch code. kvm_arch_vcpu_runnable()
checks for interrupts instead.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Return EOPNOTSUPP for KVM_TRACE_ENABLE/PAUSE/DISABLE ioctls.
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

[avi: make it build]
[avi: fold trace-arch.h into trace.h]

CC: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

[avi: fix build on non-x86]
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

[christian: remove unused variables on s390]
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Latest kernel started to use these two registers.
Signed-off-by: NLiu Yu <yu.liu@freescale.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Signed-off-by: NLiu Yu <yu.liu@freescale.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

According to commit 70fe3af8.
Signed-off-by: NLiu Yu <yu.liu@freescale.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Fixes a couple of warnings like this one:

WARNING: arch/powerpc/kvm/kvm-440.o(.text+0x1e8c): Section mismatch in reference from the function kvmppc_44x_exit() to the function .exit.text:kvmppc_booke_exit()
The function kvmppc_44x_exit() references a function in an exit section.
Often the function kvmppc_booke_exit() has valid usage outside the exit section
and the fix is to remove the __exit annotation of kvmppc_booke_exit.

Also add some __init annotations on obvious routines.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Reduce Kconfig code duplication.
Signed-off-by: NAvi Kivity <avi@redhat.com>

By default, the EEH framework on powerpc does what's known as a "hot
reset" during recovery of a PCI Express device.  We've found a case
where the device needs a "fundamental reset" to recover properly.  The
current PCI error recovery and EEH frameworks do not support this
distinction.

The attached patch makes changes to EEH to utilize the new bit field.
Signed-off-by: NMike Mason <mmlnx@us.ibm.com>
Signed-off-by: NRichard Lary <rlary@us.ibm.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

This was #define'd as 0 on all platforms, so let's get rid of it.

This change makes pci_scan_slot() slightly easier to read.

Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Tony Luck <tony.luck@intel.com>
Cc: David Howells <dhowells@redhat.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Reviewed-by: NMatthew Wilcox <willy@linux.intel.com>
Acked-by: NRussell King <linux@arm.linux.org.uk>
Acked-by: NRalf Baechle <ralf@linux-mips.org>
Acked-by: NKyle McMartin <kyle@mcmartin.ca>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: NPaul Mundt <lethal@linux-sh.org>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NAlex Chiang <achiang@hp.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

This patch fixes a null pointer exception caused by removal of
'ack()' for level interrupts in the Xilinx interrupt driver.  A recent
change to the xilinx interrupt controller removed the ack hook for
level irqs.
Signed-off-by: NRoderick Colenbrander <thunderbird2k@gmail.com>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

I had the codes for L1 D-cache load accesses and misses swapped
around, and the wrong codes for LL-cache accesses and misses.
This corrects them.
Reported-by: NCorey Ashford <cjashfor@linux.vnet.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: <stable@kernel.org>
LKML-Reference: <19103.8514.709300.585484@cargo.ozlabs.ibm.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

A misconfiguration by the firmware of the U4 PCIe bridge on PowerMac G5
with the U4 bridge (latest generations, may also affect the iMac G5
"iSight") is causing us to re-assign the PCI BARs of the video card,
which can get it out of sync with the firmware, thus breaking offb.

This works around it by fixing up the bridge configuration properly
at boot time. It also fixes a bug where the firmware provides us with
an incorrect set of accessible regions in the device-tree.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Switch to using the Power ISA defined PTE format when we have a 64-bit
PTE.  This makes the code handling between fsl-booke and book3e-64
similiar for TLB faults.

Additionally this lets use take advantage of the page size encodings and
full permissions that the HW PTE defines.

Also defined _PMD_PRESENT, _PMD_PRESENT_MASK, and _PMD_BAD since the
32-bit ppc arch code expects them.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Add defines for the other page sizes.  Even if HW doesn't support them
we made them use them for hugetlbfs support.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The SLB can change sizes across a live migration, which was not
being handled, resulting in possible machine crashes during
migration if migrating to a machine which has a smaller max SLB
size than the source machine. Fix this by first reducing the
SLB size to the minimum possible value, which is 32, prior to
migration. Then during the device tree update which occurs after
migration, we make the call to ensure the SLB gets updated. Also
add the slb_size to the lparcfg output so that the migration
tools can check to make sure the kernel has this capability
before allowing migration in scenarios where the SLB size will change.

BenH: Fixed #include <asm/mmu-hash64.h> -> <asm/mmu.h> to avoid
      breaking ppc32 build
Signed-off-by: NBrian King <brking@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The two versions are doing almost exactly the same thing.  No need to
maintain them as separate files.  This patch also has the side effect
of making the PCI device tree scanning code available to 32 bit powerpc
machines, but no board ports actually make use of this feature at this
point.
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
Acked-by: NKumar Gala <galak@kernel.crashing.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Needed to avoid namespace conflicts when the common code
function bodies of _spin_try_lock() etc. are moved to a header
file where the function name would be __spin_try_lock().
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Horst Hartmann <horsth@linux.vnet.ibm.com>
Cc: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: David Miller <davem@davemloft.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: <linux-arch@vger.kernel.org>
LKML-Reference: <20090831124415.918799705@de.ibm.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

To support cuImage, we need to initialize the required sections and
ensure that it is built.
Signed-off-by: NTiejun Chen <tiejun.chen@windriver.com>
Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>

For cuImage format it's necessary to provide clock fixups since u-boot will
not pass necessary clock frequency into the dtb included into cuImage so we
implement the clock fixups as defined in the technical documentation for the
board and update header file with the basic register definitions.
Signed-off-by: NTiejun Chen <tiejun.chen@windriver.com>
Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>

This patch adds support for the ESTeem 195E Hotfoot SBC.

There are several variants of the SBC deployed, single/dual
ethernet+serial, and also 4MB/8MB flash variations.  In the interest of
having a single kernel image boot on all boards, the cuboot shim detects
the differences and mangles the DTS tree appropriately.

With the exception of the CF interface that was never populated on
production boards, this code/DTS supports all boardpop options.
Signed-off-by: NSolomon Peachy <solomon@linux-wlan.com>
Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>

This patch adds support for the AMCC (AppliedMicro) PPC460SX Eiger evaluation
board.
Signed-off-by: NTai Tri Nguyen <ttnguyen@amcc.com>
Acked-by: NFeng Kan <fkan@amcc.com>
Acked-by: NTirumala Marri <tmarri@amcc.com>
Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>

This patch adds NOR MTD support and I2C HWMON support for the AD7414
to the AMCC Arches defconfig.
Signed-off-by: NStefan Roese <sr@denx.de>
Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>

This patch adds some nodes to the AMCC Arches dts:

- L2 cache support
- NOR FLASH mapping with default partitioning
- I2C HWMON device (AD7414)
Signed-off-by: NStefan Roese <sr@denx.de>
Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>

In some CPUs (i.e. MPC8569) QE shuts down completely during sleep,
drivers may want to know that to reinitialize registers and buffer
descriptors.

This patch implements qe_alive_during_sleep() helper function, so far
it just checks if MPC8569-compatible power management controller is
present, which is a sign that QE turns off during sleep.
Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This moves the code to start the decrementer on 40x and BookE into
a separate function which is now called from time_init() and
secondary_time_init(), before the respective clock sources are
registered. We also remove the 85xx specific code for doing it
from the platform code.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>