If the initial fbdev configuration (intel_fbdev_initial_config()) runs
and there still no sink connected it will cause
drm_fb_helper_initial_config() to return 0 as no error happened (but
internally the return is -EAGAIN).  Because no framebuffer was
allocated, when a sink is connected intel_fbdev_output_poll_changed()
will not execute drm_fb_helper_hotplug_event() that would trigger
another try to do the initial fbdev configuration.

So here allowing drm_fb_helper_hotplug_event() to be executed when there
is no framebuffer allocated and fbdev was not set up yet.

This issue also happens when a MST DP sink is connected since boot, as
the MST topology is discovered in parallel if
intel_fbdev_initial_config() is executed before the first sink MST is
discovered it will cause this same issue.

This is a follow-up patch of
https://patchwork.freedesktop.org/patch/196089/

Changes from v1:
- not creating a dump framebuffer anymore, instead just allowing
  drm_fb_helper_hotplug_event() to execute when fbdev is not setup yet.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104158
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104425
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: stable@vger.kernel.org # v4.15+
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NJosé Roberto de Souza <jose.souza@intel.com>
Tested-by: NPaul Menzel <pmenzel@molgen.mpg.de>
Tested-by: frederik <frederik.schwan@linux.com> # 4.15.17
Tested-by: NIan Pilcher <arequipeno@gmail.com>
Acked-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180418234158.9388-1-jose.souza@intel.com

Knowing the offset of the per-engine scratch/HWS page during boot is not
very informative, so remove the DRM_DEBUG.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180424115236.2022-1-chris@chris-wilson.co.uk

If we have more than a few, possibly several thousand request in the
queue, don't show the central portion, just the first few and the last
being executed and/or queued. The first few should be enough to help
identify a problem in execution, and most often comparing the first/last
in the queue is enough to identify problems in the scheduling.

We may need some fine tuning to set MAX_REQUESTS_TO_SHOW for common
debug scenarios, but for the moment if we can avoiding spending more
than a few seconds dumping the GPU state that will avoid a nasty
livelock (where hangcheck spends so long dumping the state, it fires
again and starts to dump the state again in parallel, ad infinitum).

v2: Remember to print last not the stale rq iter after the loop.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180424081600.27544-1-chris@chris-wilson.co.uk

printk unhelpfully inserts a '\n' between consecutive calls, and since
our drm_printf wrapper may be emitting info a seq_file instead,
KERN_CONT is not an option. To work with any drm_printf destination, we
need to build up the output into a temporary buf on the stack and then
feed the complete line in a single call to printk.

Fixes: b7268c5e ("drm/i915: Pack params to engine->schedule() into a struct")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180424010839.22860-1-chris@chris-wilson.co.uk

We need to be careful to not let compiler evaluate
the expiration and the operation on it's terms.

Document and enforce that COND will be evaluated
before checking timeout expiration.
Suggested-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423113754.28424-2-mika.kuoppala@linux.intel.com

We use jiffies to determine when wait expires. However
Imre did find out that jiffies can and will do a >1
increments on certain situations [1]. When this happens
in a wait_for loop, we return timeout errorneously
much earlier than what the real wallclock would say.

We can't afford our waits to timeout prematurely.
Discard jiffies and change to ktime to detect timeouts.

v2: added bugzilla entry (Imre), added stable (Chris)
Reported-by: NImre Deak <imre.deak@intel.com>
References: https://lkml.org/lkml/2018/4/18/798 [1]
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105771
Cc: Imre Deak <imre.deak@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423113754.28424-1-mika.kuoppala@linux.intel.com

Adding a missing GT2 sku discovered off hardware.
Signed-off-by: NMatt Atwood <matthew.s.atwood@intel.com>
Reviewed-by: NClint Taylor <clinton.a.taylor@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1524522483-19987-1-git-send-email-matthew.s.atwood@intel.com

- Minor condition check improvment (Gustavo A. R. Silva)
- Non-priviliged batch buffer scan (Yan Zhao)
- Scheduling optimizations (Zhipeng Gong)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/5dafba29-b2bd-6b94-630e-db5c009da7e3@intel.com

In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.

Addresses-Coverity-ID: 1466154 ("Missing break in switch")
Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: NZhi Wang <zhi.a.wang@intel.com>

The checks are misleading and not required [1].

[1] https://lkml.org/lkml/2018/3/19/1792

Addresses-Coverity-ID: 1466017
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NZhi Wang <zhi.a.wang@intel.com>

For perfomance purpose, scanning of non-privileged batch buffer is turned
off by default. But for debugging purpose, it can be turned on via debugfs.
After scanning, we submit the original non-privileged batch buffer into
hardware, so that the scanning is only a peeking window of guest submitted
commands and will not affect the execution results.

v4:
- refine debugfs print format&content (zhenyu wang)
- print engine id instread of engine name to prevent potential memory leak
  in debugfs warning message. (zhenyu wang)

v3:
- change vgpu->scan_nonprivbb from type bool to u32, so it is able to
  selectively turn on/off scanning of non-privileged batch buffer on engine
  level. e.g.
  if vgpu->scan_nonprivbb=3, then it will scan non-privileged batch buffer
  on engine 0 and 1.
- in debugfs interface to set vgpu->scan_nonprivbb, print warning message
  to warn user and explicitly tell state change in kernel log (zhenyu wang)
v2:
- rebase
- update comments for start_gma_offset (henry)
Signed-off-by: NZhao Yan <yan.y.zhao@intel.com>
Reviewed-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: NZhi Wang <zhi.a.wang@intel.com>

When there is only one vGPU in GVT-g and it submits workloads
continuously, it will not be scheduled out, vgpu_update_timeslice
is not called and its sched_in_time is not updated in a long time,
which can be several seconds or longer.
Once GVT-g pauses to submit workload for this vGPU due to heavy
host CPU workload, this vGPU get scheduled out and
vgpu_update_timeslice is called, its left_ts will be subtract
by a big value from sched_out_time - sched_in_time.
When GVT-g is going to submit workload for this vGPU again,
it will not be scheduled in until gvt_balance_timeslice reaches
stage 0 and reset its left_ts, which introduces several
hunderand milliseconds latency.

This patch updates time slice in every ms to update sched_in_time
timely.

v2: revise commit message
v3: use more concise expr. (Zhenyu)
Signed-off-by: NZhipeng Gong <zhipeng.gong@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Min He <min.he@intel.com>
Signed-off-by: NZhi Wang <zhi.a.wang@intel.com>

intel_gvt_schedule check timer through a counter and is supposed
to wake up to increase the counter every ms.
In a system with heavy workload, gvt_service_thread can not get
a chance to run right after wake up and will be delayed several
milliseconds. As a result, one hundred counter interval means
several hundred milliseconds in real time.

This patch use real time instead of counter to do timer check.

v2: remove static variable. (Zhenyu)
v3: correct expire_time update. (Zhenyu)
Signed-off-by: NZhipeng Gong <zhipeng.gong@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Min He <min.he@intel.com>
Signed-off-by: NZhi Wang <zhi.a.wang@intel.com>

Before this commit the WaSkipStolenMemoryFirstPage workaround code was
skipping the first 4k by passing 4096 as start of the address range passed
to drm_mm_init(). This means that calling drm_mm_reserve_node() to try and
reserve the firmware framebuffer so that we can inherit it would always
fail, as the firmware framebuffer starts at address 0.

Commit d4353761 ("drm/i915: skip the first 4k of stolen memory on
everything >= gen8") says in its commit message: "This is confirmed to fix
Skylake screen flickering issues (probably caused by the fact that we
initialized a ring in the first page of stolen, but I didn't 100% confirm
this theory)."

Which suggests that it is safe to use the first page for a linear
framebuffer as the firmware is doing (see note below).

This commit always passes 0 as start to drm_mm_init() and works around
WaSkipStolenMemoryFirstPage in i915_gem_stolen_insert_node_in_range()
by insuring the start address passed by to drm_mm_insert_node_in_range()
is always 4k or more. All entry points to i915_gem_stolen.c go through
i915_gem_stolen_insert_node_in_range(), so that any newly allocated
objects such as ring-buffers will not be allocated in the first 4k.

The one exception is i915_gem_object_create_stolen_for_preallocated()
which directly calls drm_mm_reserve_node() which now will be able to
use the first 4k.

This fixes the i915 driver no longer being able to inherit the firmware
framebuffer on gen8+, which fixes the video output changing from the
vendor logo to a black screen as soon as the i915 driver is loaded
(on systems without fbcon).

Some notes about the mapping of the BIOS framebuffer:

v1 led to some discussion if the assumption of the intel_display.c code
that the firmware framebuffer is a linear mapping of the stolen memory
starting at offset 0 is still correct, because that would mean that the
GOP does not implement the WaSkipStolenMemoryFirstPage workaround.

To verify this the following code was added at the end of
i915_gem_object_create_stolen_for_preallocated() :

pr_err("first ggtt entry before bind: 0x%016llx\n",
       readq(dev_priv->ggtt.gsm));
ret = i915_vma_bind(vma,
            HAS_LLC(dev_priv) ? I915_CACHE_LLC : I915_CACHE_NONE,
            PIN_UPDATE);
pr_err("i915_vma_bind ret %d\n", ret);
pr_err("first ggtt entry after bind: 0x%016llx\n",
       readq(dev_priv->ggtt.gsm));

Which prints the mapping of the first page, then does a vma_bind() to
force update the mapping with our linear view of the framebuffer and
then prints the mapping of the first page again.

On an Asrock B150M Pro4S/D3 mainboard with i5-6500 CPU this prints:

[    1.651141] first ggtt entry before bind: 0x0000000078c00001
[    1.651151] i915_vma_bind ret 0
[    1.651152] first ggtt entry after bind: 0x0000000078c00083

And "sudo cat /proc/iomem | grep Stolen" gives:
  78c00000-88bfffff : Graphics Stolen Memory

There are no visual changes with this patch (BIOS vendor logo still
stays in place when we inherit the BIOS framebuffer), so the vma_bind()
does not impact which memory is being scanned out.

The address of the first ggtt entry matches with the start of stolen
and the i915_vma_bind call only changes the first gtt entry's flags,
or-ing in _PAGE_RW (BIT(1)) and PPAT_CACHED (BIT(7)), which perfectly
matches what we would expect based on gen8_pte_encode()'s behavior.

So it seems that the GOP indeed does NOT implement the wa and the i915's
code assuming a linear mapping at the start of stolen for the BIOS fb
still holds true for gen8+.

I've also tested this on a Cherry Trail based device (a GPD Win)
with identical results (the flags are 0x1b after the vma_bind
on CHT, which matches with I915_CACHE_NONE).

Changed in v2: No code changes, extended the commit message with the
verification that the intel_display.c BIOS framebuffer mapping is still
correct.
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180420095933.16442-1-hdegoede@redhat.com

Timestamps are useful for IGT tests that trigger PSR exit and/or wait for
PSR entry.

v2: Removed seqlock (Ville)
    Removed erroneous warning in irq loop (Chris)

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: NJose Roberto de Souza <jose.souza@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180403212420.25007-4-dhinakaran.pandiyan@intel.com

Interrupts other than the one for AUX errors are required only for debug,
so unmask them via debugfs when the user requests debug.

User can make such a request with
echo 1 > <DEBUG_FS>/dri/0/i915_edp_psr_debug

There are no locks to serialize PSR debug enabling from
irq_postinstall() and debugfs for simplicity. As irq_postinstall() is
called only during module initialization/resume and IGT subtests
aren't expected to modify PSR debug at those times, we should be safe.

v2: Unroll loops (Ville)
    Avoid resetting error mask bits.

v3: Unmask interrupts in postinstall() if debug was still enabled.
    Avoid RMW (Ville)

v4: Avoid extra IMR write introduced in the previous version.(Jose)
    Style changes, renames (Jose).

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: NJose Roberto de Souza <jose.souza@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180405013717.24254-1-dhinakaran.pandiyan@intel.com

Plug in the bdw+ irq handling for PSR interrupts. bdw+ supports psr on
any transcoder in theory, though the we don't currenty enable PSR except
on the EDP transcoder.

v2: From DK
 * Rebased on drm-tip
v3: Switched author to Ville based on IRC discussion.

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: NJose Roberto de Souza <jose.souza@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180403212420.25007-2-dhinakaran.pandiyan@intel.com

The definitions for the error register should be valid on bdw/skl too,
but there we haven't even enabled DE_MISC handling yet.

Somewhat confusing the the moved register offset on bdw is only for
the _CTL/_AUX register, and that _IIR/IMR stayed where they have been
on bdw.

v2: Fixes from Ville.

v3: From DK
 * Rebased on drm-tip
 * Removed BDW IIR bit definition, looks like an unintentional change that
should be in the following patch.

v4: From DK
 * Don't mask REG_WRITE.

References: bspec/11974 [SRD Interrupt Bit Definition DevHSW]
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Signed-off-by: NDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: NJose Roberto de Souza <jose.souza@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180405220023.9449-1-dhinakaran.pandiyan@intel.com

One is outright unused, other can be made static.

Drive-by cleanup while accidentally reading dc code.

Cc: Imre Deak <imre.deak@intel.com>
Acked-by: NImre Deak <imre.deak@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180417100225.12286-1-daniel.vetter@ffwll.ch

The DMC FW specific part of display WA#1183 is supposed to be enabled
whenever enabling DC5 or DC6, so move it to the DC6 enable function
from the DC6 disable function.

I noticed this after Daniel's patch to remove the unused
skl_disable_dc6() function.

Fixes: 53421c2f ("drm/i915: Apply Display WA #1183 on skl, kbl, and cfl")
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: <stable@vger.kernel.org>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180419155109.29451-1-imre.deak@intel.com

Make the PIPE_CONF_CHECK macros a bit more robust by wrapping them
in do {} while(0). Avoids funky sirprises when you try put an 'else'
after a PIPE_CONF_CHECK invocation...
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180316183625.16316-1-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> #irc

Move the limit checks near the calculations for each field, and actually
log the values that exceed limits.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180419085940.21505-1-jani.nikula@intel.com

In GLK when the device boots with only 1366x768 panel without audio, HDA
codec doesn't come up. In this case, the CDCLK is less than twice the
BCLK. Even though audio isn't being enabled, having a too low CDCLK
leads to audio probe failing altogether.

Require CDCLK to be at least twice the BLCK regardless of audio. This is
a minimal fix to improve things. Unfortunately, this a) leads to too
high CDCLK being used when audio is not used, and b) is still not enough
to fix audio probe when no outputs are connected at probe time.

The proper fix would be to increase CDCLK dynamically from the audio
component hooks.

v2:
    - Address comment (Jani)
    - New design approach
v3: - Typo fix on top of v1

v4 by Jani: rewrite commit message, add comment in code

Cc: stable@vger.kernel.org
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@gmail.com>
Cc: Wenkai Du <wenkai.du@intel.com>
Reviewed-by: NWenkai Du <wenkai.du@intel.com>
Tested-by: NWenkai Du <wenkai.du@intel.com>
Acked-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102937Signed-off-by: NAbhay Kumar <abhay.kumar@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180418103707.14645-1-jani.nikula@intel.com

Today we only want to pass along the priority to engine->schedule(), but
in the future we want to have much more control over the various aspects
of the GPU during a context's execution, for example controlling the
frequency allowed. As we need an ever growing number of parameters for
scheduling, move those into a struct for convenience.

v2: Move the anonymous struct into its own function for legibility and
ye olde gcc.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180418184052.7129-3-chris@chris-wilson.co.uk

Having moved the priotree struct into i915_scheduler.h, identify it as
the scheduling element and rebrand into i915_sched. This becomes more
useful as we start attaching more information we require to propagate
through the scheduler.

v2: Use i915_sched_node for future distinctiveness
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180418184052.7129-2-chris@chris-wilson.co.uk

Over time the priotree has grown from a sorted list to a more
complicated structure for propagating constraints along the dependency
chain to try and resolve priority inversion. Start to segregate this
information from the rest of the request/fence tracking.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180418184052.7129-1-chris@chris-wilson.co.uk

On Geminilake, sometimes audio card is not getting
detected after reboot. This is a spurious issue happening on
Geminilake. HW codec and HD audio controller link was going
out of sync for which there was a fix in i915 driver but
was not getting invoked for GLK. Extending this fix to GLK as well.

Tested by Du,Wenkai on GLK board.

Bspec: 21829

v2: Instead of checking GEN9_BC, BXT and GLK macros, use IS_GEN9 macro (Jani N)

Cc: <stable@vger.kernel.org> # b651bd2a ("drm/i915/audio: Fix audio enumeration issue on BXT")
Cc: <stable@vger.kernel.org>
Signed-off-by: NGaurav K Singh <gaurav.k.singh@intel.com>
Reviewed-by: NAbhay Kumar <abhay.Kumar@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1523989338-29677-1-git-send-email-gaurav.k.singh@intel.com

Silence smatch over:

drivers/gpu/drm/i915/selftests/intel_workarounds.c:58 read_nonprivs() error: 'cs' dereferencing possible ERR_PTR()

by handling a potential (but unlikely) failure of intel_ring_begin.

Fixes: f4ecfbfc ("drm/i915: Check whitelist registers across resets")
Signed-off-by: NOscar Mateo <oscar.mateo@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/1523915821-30624-1-git-send-email-oscar.mateo@intel.com

We have to cleanup after i915_perf_init(), even on the error path, as it
passes a pointer into the module to the sysfs core. If we fail to
unregister the sysctl table, we leave a dangling pointer which then may
explode anytime later.

Fixes: 9f9b2792 ("drm/i915/perf: reuse timestamp frequency from device info")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: NLionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180414091233.32224-1-chris@chris-wilson.co.uk

Add a selftest to ensure that we restore the whitelisted registers after
rewrite the registers everytime they might be scrubbed, e.g. module
load, reset and resume. For the other volatile workaround registers, we
export their presence via debugfs and check in igt/gem_workarounds.
However, we don't export the whitelist and rather than do so, let's test
them directly in the kernel.

The test we use is to read the registers back from the CS (this helps us
be sure that the registers will be valid for MI_LRI etc). In order to
generate the expected list, we split intel_whitelist_workarounds_emit
into two phases, the first to build the list and the second to apply.
Inside the test, we only build the list and then check that list against
the hw.

v2: Filter out pre-gen8 as they do not have RING_NONPRIV.
v3: Drop unused engine parameter, no plans to use it now or future.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: NOscar Mateo <oscar.mateo@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180414122754.569-1-chris@chris-wilson.co.uk

It looks that GuC does not actively use GUC_CTL_DEVICE_INFO parameter
where we are passing GT type and Core family values.
Let's stop/remove setup of this parameter and remove related
definitions.

v2: (this time without squashed HAX)
  - New title and description
  - Remove also GUC_CORE_FAMILY_* definitions (Michel)
v3:
  - The removed define GUC_CTL_DEVICE_INFO has been restored (Michel)
  - Updated description (Sagar)
v4: rebase
Signed-off-by: NPiotr Piórkowski <piotr.piorkowski@intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: John A Spotswood <john.a.spotswood@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michel Thierry <michel.thierry@intel.com>
Acked-by: NMichel Thierry <michel.thierry@intel.com>
Reviewed-by: NSagar Arun Kamble <sagar.a.kamble@intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180413085245.57206-1-piotr.piorkowski@intel.com

Signed-off-by: NJani Nikula <jani.nikula@intel.com>

Evidence indicates that Cannonlake HWSP is not coherent
as it should. Revert to using mmio access for now.

Testcase: igt/gem_ctx_switch
References: https://bugs.freedesktop.org/show_bug.cgi?id=105888
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Rafael Antognolli <rafael.antognolli@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Acked-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180412145802.23313-1-mika.kuoppala@linux.intel.com

No functional changes.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180411131519.9091-2-jani.nikula@intel.com

The VBT contains the DDC pin to use for specific ports. Alas, sometimes
the field appears to contain bogus data, and while we check for it later
on in intel_gmbus_get_adapter() we fail to check the returned NULL on
errors. Oops results.

The simplest approach seems to be to catch and ignore the bogus DDC pins
already at the VBT parsing phase, reverting to fixed per port default
pins. This doesn't guarantee display working, but at least it prevents
the oops. And we continue to be fuzzed by VBT.

One affected machine is Dell Latitude 5590 where a BIOS upgrade added
invalid DDC pins.

Typical backtrace:

[   35.461411] WARN_ON(!intel_gmbus_is_valid_pin(dev_priv, pin))
[   35.461432] WARNING: CPU: 6 PID: 411 at drivers/gpu/drm/i915/intel_i2c.c:844 intel_gmbus_get_adapter+0x32/0x37 [i915]
[   35.461437] Modules linked in: i915 ahci libahci dm_snapshot dm_bufio dm_raid raid456 async_raid6_recov async_pq raid6_pq async_xor xor async_memcpy async_tx
[   35.461445] CPU: 6 PID: 411 Comm: kworker/u16:2 Not tainted 4.16.0-rc7.x64-g1cda370ffded #1
[   35.461447] Hardware name: Dell Inc. Latitude 5590/0MM81M, BIOS 1.1.9 03/13/2018
[   35.461450] Workqueue: events_unbound async_run_entry_fn
[   35.461465] RIP: 0010:intel_gmbus_get_adapter+0x32/0x37 [i915]
[   35.461467] RSP: 0018:ffff9b4e43d47c40 EFLAGS: 00010286
[   35.461469] RAX: 0000000000000000 RBX: ffff98f90639f800 RCX: ffffffffae051960
[   35.461471] RDX: 0000000000000001 RSI: 0000000000000092 RDI: 0000000000000246
[   35.461472] RBP: ffff98f905410000 R08: 0000004d062a83f6 R09: 00000000000003bd
[   35.461474] R10: 0000000000000031 R11: ffffffffad4eda58 R12: ffff98f905410000
[   35.461475] R13: ffff98f9064c1000 R14: ffff9b4e43d47cf0 R15: ffff98f905410000
[   35.461477] FS:  0000000000000000(0000) GS:ffff98f92e580000(0000) knlGS:0000000000000000
[   35.461479] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   35.461481] CR2: 00007f5682359008 CR3: 00000001b700c005 CR4: 00000000003606e0
[   35.461483] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   35.461484] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   35.461486] Call Trace:
[   35.461501]  intel_hdmi_set_edid+0x37/0x27f [i915]
[   35.461515]  intel_hdmi_detect+0x7c/0x97 [i915]
[   35.461518]  drm_helper_probe_single_connector_modes+0xe1/0x6c0
[   35.461521]  drm_setup_crtcs+0x129/0xa6a
[   35.461523]  ? __switch_to_asm+0x34/0x70
[   35.461525]  ? __switch_to_asm+0x34/0x70
[   35.461527]  ? __switch_to_asm+0x40/0x70
[   35.461528]  ? __switch_to_asm+0x34/0x70
[   35.461529]  ? __switch_to_asm+0x40/0x70
[   35.461531]  ? __switch_to_asm+0x34/0x70
[   35.461532]  ? __switch_to_asm+0x40/0x70
[   35.461534]  ? __switch_to_asm+0x34/0x70
[   35.461536]  __drm_fb_helper_initial_config_and_unlock+0x34/0x46f
[   35.461538]  ? __switch_to_asm+0x40/0x70
[   35.461541]  ? _cond_resched+0x10/0x33
[   35.461557]  intel_fbdev_initial_config+0xf/0x1c [i915]
[   35.461560]  async_run_entry_fn+0x2e/0xf5
[   35.461563]  process_one_work+0x15b/0x364
[   35.461565]  worker_thread+0x2c/0x3a0
[   35.461567]  ? process_one_work+0x364/0x364
[   35.461568]  kthread+0x10c/0x122
[   35.461570]  ? _kthread_create_on_node+0x5d/0x5d
[   35.461572]  ret_from_fork+0x35/0x40
[   35.461574] Code: 74 16 89 f6 48 8d 04 b6 48 c1 e0 05 48 29 f0 48 8d 84 c7 e8 11 00 00 c3 48 c7 c6 b0 19 1e c0 48 c7 c7 64 8a 1c c0 e8 47 88 ed ec <0f> 0b 31 c0 c3 8b 87 a4 04 00 00 80 e4 fc 09 c6 89 b7 a4 04 00
[   35.461604] WARNING: CPU: 6 PID: 411 at drivers/gpu/drm/i915/intel_i2c.c:844 intel_gmbus_get_adapter+0x32/0x37 [i915]
[   35.461606] ---[ end trace 4fe1e63e2dd93373 ]---
[   35.461609] BUG: unable to handle kernel NULL pointer dereference at 0000000000000010
[   35.461613] IP: i2c_transfer+0x4/0x86
[   35.461614] PGD 0 P4D 0
[   35.461616] Oops: 0000 [#1] SMP PTI
[   35.461618] Modules linked in: i915 ahci libahci dm_snapshot dm_bufio dm_raid raid456 async_raid6_recov async_pq raid6_pq async_xor xor async_memcpy async_tx
[   35.461624] CPU: 6 PID: 411 Comm: kworker/u16:2 Tainted: G        W        4.16.0-rc7.x64-g1cda370ffded #1
[   35.461625] Hardware name: Dell Inc. Latitude 5590/0MM81M, BIOS 1.1.9 03/13/2018
[   35.461628] Workqueue: events_unbound async_run_entry_fn
[   35.461630] RIP: 0010:i2c_transfer+0x4/0x86
[   35.461631] RSP: 0018:ffff9b4e43d47b30 EFLAGS: 00010246
[   35.461633] RAX: ffff9b4e43d47b6e RBX: 0000000000000005 RCX: 0000000000000001
[   35.461635] RDX: 0000000000000002 RSI: ffff9b4e43d47b80 RDI: 0000000000000000
[   35.461636] RBP: ffff9b4e43d47bd8 R08: 0000004d062a83f6 R09: 00000000000003bd
[   35.461638] R10: 0000000000000031 R11: ffffffffad4eda58 R12: 0000000000000002
[   35.461639] R13: 0000000000000001 R14: ffff9b4e43d47b6f R15: ffff9b4e43d47c07
[   35.461641] FS:  0000000000000000(0000) GS:ffff98f92e580000(0000) knlGS:0000000000000000
[   35.461643] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   35.461645] CR2: 0000000000000010 CR3: 00000001b700c005 CR4: 00000000003606e0
[   35.461646] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   35.461647] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   35.461649] Call Trace:
[   35.461652]  drm_do_probe_ddc_edid+0xb3/0x128
[   35.461654]  drm_get_edid+0xe5/0x38d
[   35.461669]  intel_hdmi_set_edid+0x45/0x27f [i915]
[   35.461684]  intel_hdmi_detect+0x7c/0x97 [i915]
[   35.461687]  drm_helper_probe_single_connector_modes+0xe1/0x6c0
[   35.461689]  drm_setup_crtcs+0x129/0xa6a
[   35.461691]  ? __switch_to_asm+0x34/0x70
[   35.461693]  ? __switch_to_asm+0x34/0x70
[   35.461694]  ? __switch_to_asm+0x40/0x70
[   35.461696]  ? __switch_to_asm+0x34/0x70
[   35.461697]  ? __switch_to_asm+0x40/0x70
[   35.461698]  ? __switch_to_asm+0x34/0x70
[   35.461700]  ? __switch_to_asm+0x40/0x70
[   35.461701]  ? __switch_to_asm+0x34/0x70
[   35.461703]  __drm_fb_helper_initial_config_and_unlock+0x34/0x46f
[   35.461705]  ? __switch_to_asm+0x40/0x70
[   35.461707]  ? _cond_resched+0x10/0x33
[   35.461724]  intel_fbdev_initial_config+0xf/0x1c [i915]
[   35.461727]  async_run_entry_fn+0x2e/0xf5
[   35.461729]  process_one_work+0x15b/0x364
[   35.461731]  worker_thread+0x2c/0x3a0
[   35.461733]  ? process_one_work+0x364/0x364
[   35.461734]  kthread+0x10c/0x122
[   35.461736]  ? _kthread_create_on_node+0x5d/0x5d
[   35.461738]  ret_from_fork+0x35/0x40
[   35.461739] Code: 5c fa e1 ad 48 89 df e8 ea fb ff ff e9 2a ff ff ff 0f 1f 44 00 00 31 c0 e9 43 fd ff ff 31 c0 45 31 e4 e9 c5 fd ff ff 41 54 55 53 <48> 8b 47 10 48 83 78 10 00 74 70 41 89 d4 48 89 f5 48 89 fb 65
[   35.461756] RIP: i2c_transfer+0x4/0x86 RSP: ffff9b4e43d47b30
[   35.461757] CR2: 0000000000000010
[   35.461759] ---[ end trace 4fe1e63e2dd93374 ]---

Based on a patch by Fei Li.

v2: s/reverting/sticking/ (Chris)

Cc: stable@vger.kernel.org
Cc: Fei Li <fei.li@intel.com>
Co-developed-by: NFei Li <fei.li@intel.com>
Reported-by: NPavel Nakonechnyi <zorg1331@gmail.com>
Reported-and-tested-by: NSeweryn Kokot <sewkokot@gmail.com>
Reported-and-tested-by: NLaszlo Valko <valko@linux.karinthy.hu>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105549
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105961Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180411131519.9091-1-jani.nikula@intel.com

There are different kind of workarounds (those that modify registers that
live in the context image, those that modify global registers, those that
whitelist registers, etc...) and they have different requirements in terms
of where they are applied and how. Also, by splitting them apart, it should
be easier to decide where a new workaround should go.

v2:
  - Add multiple MISSING_CASE
  - Rebased

v3:
  - Rename mmio_workarounds to gt_workarounds (Chris, Mika)
  - Create empty placeholders for BDW and CHV GT WAs
  - Rebased

v4: Rebased

v5:
 - Rebased
 - FORCE_TO_NONPRIV register exists since BDW, so make a path
   for it to achieve universality, even if empty (Chris)
Signed-off-by: NOscar Mateo <oscar.mateo@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
[ickle: appease checkpatch]
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/1523376767-18480-2-git-send-email-oscar.mateo@intel.com

This has grown to be a sizable amount of code, so move it to
its own file before we try to refactor anything. For the moment,
we are leaving behind the WA BB code and the WAs that get applied
(incorrectly) in init_clock_gating, but we will deal with it later.

v2: Use intel_ prefix for code that deals with the hardware (Chris)
v3: Rebased
v4:
  - Rebased
  - New license header
v5:
  - Rebased
  - Added some organisational notes to the file (Chris)
v6: Include DOC section in the documentation build (Jani)
Signed-off-by: NOscar Mateo <oscar.mateo@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
[ickle: appease checkpatch, mostly]
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/1523376767-18480-1-git-send-email-oscar.mateo@intel.com

We can refine our current execlists->queue_priority if we inspect
ELSP[1] rather than the head of the unsubmitted queue. Currently, we use
the unsubmitted queue and say that if a subsequent request is more
important than the current queue, we will rerun the submission tasklet
to evaluate the need for preemption. However, we only want to preempt if
we need to jump ahead of a currently executing request in ELSP. The
second reason for running the submission tasklet is amalgamate requests
into the active context on ELSP[0] to avoid a stall when ELSP[0] drains.
(Though repeatedly amalgamating requests into the active context and
triggering many lite-restore is off question gain, the goal really is to
put a context into ELSP[1] to cover the interrupt.) So if instead of
looking at the head of the queue, we look at the context in ELSP[1] we
can answer both of the questions more accurately -- we don't need to
rerun the submission tasklet unless our new request is important enough
to feed into, at least, ELSP[1].

v2: Add some comments from the discussion with Tvrtko.
v3: More commentary to cross-reference queue_request()

References: f6322edd ("drm/i915/preemption: Allow preemption between submission ports")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180411103929.27374-1-chris@chris-wilson.co.uk

Apparently caused by a merge fail at some point. Due to the nature of
the duplicated block, the second one will have no effect, and there's no
need to backport.
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180410091248.1454-1-jani.nikula@intel.com

While thinking about sporadic failures of perf_pmu/rc6-runtime-pm* tests
on some CI machines I have concluded that: a) the PMU readout of RC6 can
race against runtime PM transitions, and b) there are other reasons than
being runtime suspended which can cause intel_runtime_pm_get_if_in_use to
fail.

Therefore when estimating RC6 the code needs to assert we are indeed in
suspended state, and if not, the best we can do is return the last known
RC6 value.

Without this check we can calculate the estimated value based on un-
initialized or inappropriate internal state, which can result in over-
estimation, or in any case incorrect value being returned.

v2:
 * Re-arrange the code a bit to avoid second unlock and return branch.
   (Chris Wilson)

v3:
 * Insert some strategic blank lines and improve commit msg.
   (Chris Wilson)
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 1fe699e3 ("drm/i915/pmu: Fix sleep under atomic in RC6 readout")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105010
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180410112704.24462-1-tvrtko.ursulin@linux.intel.com