I made an embarrassing mistake and used 'IPV6' instead of 'CONFIG_IPV6'
around the function that updates the kernel about IPv6 neighbours
activity. This can be a problem if the kernel has more neighbours than a
certain threshold and it starts deleting those that are supposedly
inactive.

Fixes: b5f3e0d4 ("mlxsw: spectrum_router: Fix build when IPv6 isn't enabled")
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

IPv6 routes currently lack nexthop flags as in IPv4. This has several
implications.

In the forwarding path, it requires us to check the carrier state of the
nexthop device and potentially ignore a linkdown route, instead of
checking for RTNH_F_LINKDOWN.

It also requires capable drivers to use the user facing IPv6-specific
route flags to provide offload indication, instead of using the nexthop
flags as in IPv4.

Add nexthop flags to IPv6 routes in the 40 bytes hole and use it to
provide offload indication instead of the RTF_OFFLOAD flag, which is
removed while it's still not part of any official kernel release.

In the near future we would like to use the field for the
RTNH_F_{LINKDOWN,DEAD} flags, but this change is more involved and might
not be ready in time for the current cycle.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Acked-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not necessary to manually clear the
device driver data to NULL.

Cc: Joe Jin <joe.jin@oracle.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: NZhu Yanjun <yanjun.zhu@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not necessary to manually clear the
device driver data to NULL.

Cc: Joe Jin <joe.jin@oracle.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: NZhu Yanjun <yanjun.zhu@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

State of a register doesn't matter if it wasn't read in reaching an exit;
 a write screens off all reads downstream of it from all explored_states
 upstream of it.
This allows us to prune many more branches; here are some processed insn
 counts for some Cilium programs:
Program                  before  after
bpf_lb_opt_-DLB_L3.o       6515   3361
bpf_lb_opt_-DLB_L4.o       8976   5176
bpf_lb_opt_-DUNKNOWN.o     2960   1137
bpf_lxc_opt_-DDROP_ALL.o  95412  48537
bpf_lxc_opt_-DUNKNOWN.o  141706  78718
bpf_netdev.o              24251  17995
bpf_overlay.o             10999   9385

The runtime is also improved; here are 'time' results in ms:
Program                  before  after
bpf_lb_opt_-DLB_L3.o         24      6
bpf_lb_opt_-DLB_L4.o         26     11
bpf_lb_opt_-DUNKNOWN.o       11      2
bpf_lxc_opt_-DDROP_ALL.o   1288    139
bpf_lxc_opt_-DUNKNOWN.o    1768    234
bpf_netdev.o                 62     31
bpf_overlay.o                15     13
Signed-off-by: NEdward Cree <ecree@solarflare.com>
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Julian Wiedmann says:

====================
s390/net: updates for 4.14

a mixed bag of minor fixes, cleanups and refactors for net-next. Please apply.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

IP-address setting and removal are delayed when the device is not yet in
state SOFTSETUP or UP. ref_counter has been implemented only for
ip-address with type normal. In this patch ref_counter logic is also used
for ip-address with type rxip to allow appropriate handling of multiple
postponed rxip add and del calls.
Signed-off-by: NKittipon Meesompop <kmeesomp@linux.vnet.ibm.com>
Signed-off-by: NJulian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

change trace-messages:
- from addrxip4 to delrxip4
- from addrxip6 to delrxip6
Signed-off-by: NKittipon Meesompop <kmeesomp@linux.vnet.ibm.com>
Signed-off-by: NJulian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There exist different commands to add unicast and multicast addresses on
the OSA card. rxip addresses are always set as unicast addresses and
thus just unicast addresses should be allowed.

Adding a multicast address now fails and a grace message is generated.
Signed-off-by: NKittipon Meesompop <kmeesomp@linux.vnet.ibm.com>
Signed-off-by: NJulian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Consolidation of duplicated code, no functional change.
Signed-off-by: NJulian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Clean up the inline cruft in s390 net drivers. Many of the inlined
functions had only one caller anyway.
Suggested-by: NJoe Perches <joe@perches.com>
Signed-off-by: NJulian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Replace some open-coded parts with their proper API calls.

Also remove two skb_[re]set_mac_header() calls in the L2
xmit paths that are clearly no longer required, since at least
commit 6d1ccff6 ("net: reset mac header in dev_start_xmit()").
Signed-off-by: NJulian Wiedmann <jwi@linux.vnet.ibm.com>
Acked-by: NUrsula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

For some xmit paths we pass down a data offset to qeth_fill_buffer(),
to indicate that the first k bytes of the skb should be skipped when
mapping it into buffer elements.
Commit acd9776b ("s390/qeth: no ETH header for outbound AF_IUCV")
recently switched the offset for the IUCV-over-HiperSockets path
from 0 to ETH_HLEN, and now we have

	device	offset
	OSA	= 0
	IQD	> 0

for all xmit paths.

OSA would previously pass down -1 from do_send_packet(), to distinguish
between 1) OSA and 2) IQD with offset 0. That's no longer needed now,
so have it pass 0, make the offset unsigned and clean up how we apply
the offset in __qeth_fill_buffer().

No change of behaviour for any of our current xmit paths.
Signed-off-by: NJulian Wiedmann <jwi@linux.vnet.ibm.com>
Acked-by: NUrsula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

1. for adjusting the buffer's next_element_to_fill in __fill_buffer(),
   just pass the full qeth_qdio_out_buffer struct
2. when adding a header element, be consistent about passing
   a hint ('is_first_elem') to __fill_buffer()

No functional change.
Signed-off-by: NJulian Wiedmann <jwi@linux.vnet.ibm.com>
Acked-by: NUrsula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Improve readability of the code that determines a buffer element's
fragment type, and reduce the number of cases down from 5 to 3.
Signed-off-by: NJulian Wiedmann <jwi@linux.vnet.ibm.com>
Acked-by: NUrsula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

qeth_l3_setadapter_parms() queries the device for supported
adapterparms, even though they already have been queried as part of the
device's high-level setup. Remove that extra call.

The only call chain for qeth_l3_setadapter_parms() is
__qeth_l3_set_online()
	qeth_core_hardsetup_card()
		qeth_query_setadapterparms()
	qeth_l3_setadapter_parms()
		qeth_query_setadapterparms()

, and we only reach qeth_l3_setadapter_parms() if the first
adapterparms query succeeds. Hence removing the second query results in
no loss of functionality.
Signed-off-by: NJulian Wiedmann <jwi@linux.vnet.ibm.com>
Acked-by: NUrsula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

qeth_l2_request_initial_mac() queries the device for its supported
adapterparms, even though they already have been queried as part of the
device's high-level setup. Remove that extra call.

The only call chain for qeth_l2_request_initial_mac() is
__qeth_l2_set_online()
	qeth_core_hardsetup_card()
		qeth_query_setadapterparms()
	qeth_l2_setup_netdev()
		qeth_l2_request_initial_mac()
			qeth_query_setadapterparms()

, and we only reach qeth_l2_request_initial_mac() if the first
adapterparms query succeeds. Hence removing the second query results in
no loss of functionality.
Signed-off-by: NJulian Wiedmann <jwi@linux.vnet.ibm.com>
Acked-by: NUrsula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

After transmitting a skb via send_packet[_fast](), the statistics
code accesses the skb once more to account for transmitted page frags.
This has a (theoretical?) race against the TX completion - if the TX
completion is processed and frees the skb before hard_start_xmit()
gets to the statistics part, we access random memory.

Fix this by caching the # of page frags, before the skb is transmitted.
Signed-off-by: NJulian Wiedmann <jwi@linux.vnet.ibm.com>
Acked-by: NUrsula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The fw_type module parameter isn't showing up in the
/sys/module/liquidio/parameters directory.  Fix it by setting the read
permission bits for user, group, other in module_param_string().  Revise
the description of fw_type.  Initialize the fw_type static char array with
the default value to conform to the module parameter description.
Signed-off-by: NDerek Chickles <derek.chickles@cavium.com>
Signed-off-by: NFelix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jiri Pirko says:

====================
mlxsw: Add support for nexthop group consolidation for IPv6

Arkadi says:

Due to limited ASIC resources the maximum number of routes is limited by
the nexthop resource. In order to improve the routing scale nexthop
consolidation should be performed.

In case of IPv4, the kernel does the consolidation of nexthops in the form
of the fib_info struct. In that case, the driver uses the fib_info's
address as a key for the internal nexthop group representative struct
lookup. In case of IPv6, the kernel doesn't do consolidation, thus the
driver should implement it by itself.

The hash value is calculated based on the nexthop set, by performing
bitwise xor on the ifindexs of the nexthops, in a similar way to IPV4's
kernel implementation. In case of collision a full match is performed
between the sets which include address and ifindex comparison.

In order to use the same hash table in both cases (IPv4/6), the rhashtable
is changed to operate on variable length key.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Due to limited ASIC resources the maximum number of routes is limited by
the nexthop resource. In order to improve the routing scale nexthop
consolidation should be performed.

This patch adds support for IPv6 neighbor consolidation. The hash value
is calculated based on the nexthop set, by performing bitwise xor on the
ifindexs of the nexthops, in a similar way to IPv4's kernel implementation.
In case of collision a full match is performed between the sets which
include address and ifindex comparison.

Non gateway nexthop groups are not inserted to the hash table due to
lack of nexthop device (ifindex).
Signed-off-by: NArkadi Sharshevsky <arkadis@mellanox.com>
Reviewed-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch does preparation before introducing IPv6 nexthop group
consolidation. Currently the nexthop group hash table is used only by
IPv4 and uses fixed key size. In order to support the IPv6's variable
length key the current table is changed.
Signed-off-by: NArkadi Sharshevsky <arkadis@mellanox.com>
Reviewed-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Intiyaz Basha says:

====================
liquidio: adding support for ethtool --set-ring feature

Code reorganization is required for adding ethtool --set-ring feature.
First seven patches are for code reorganization.  The last patch is for
adding this feature.

Change Log:
V1 -> V2
 Only patch #8 was changed:  unnecessary parentheses were removed in two
 if-statements in lio_ethtool_set_ringparam().
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

added support for ethtool --set-ring feature
Signed-off-by: NIntiyaz Basha <intiyaz.basha@cavium.com>
Signed-off-by: NFelix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Moving common liquidio_setup_io_queues to lio_core.c
Signed-off-by: NIntiyaz Basha <intiyaz.basha@cavium.com>
Signed-off-by: NFelix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Moving common liquidio_napi_poll to lio_core.c
Signed-off-by: NIntiyaz Basha <intiyaz.basha@cavium.com>
Signed-off-by: NFelix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Moving common liquidio_napi_drv_callback to lio_core.c
Signed-off-by: NIntiyaz Basha <intiyaz.basha@cavium.com>
Signed-off-by: NFelix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Moving common liquidio_push_packet to lio_core.c
Signed-off-by: NIntiyaz Basha <intiyaz.basha@cavium.com>
Signed-off-by: NFelix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Moving common octeon_setup_droq to lio_core.c
Signed-off-by: NIntiyaz Basha <intiyaz.basha@cavium.com>
Signed-off-by: NFelix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Moving common update_txq_status to lio_core.c
Signed-off-by: NIntiyaz Basha <intiyaz.basha@cavium.com>
Signed-off-by: NFelix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Moving common function wait_for_pending_requests to octeon_network.h
Signed-off-by: NIntiyaz Basha <intiyaz.basha@cavium.com>
Signed-off-by: NFelix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Ohad Oz says:

====================
Enable Mellanox switch device in I2C mode

The following patch set updates global to Mellanox Kconfig files to support
configuration of Mellanox Switch (mlxsw) without PCI and with I2C only.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch apply Mellanox network vendor which includes:
- Mellanox card devices: ConnectX-4, ConnectX-5 and Connect-IB cards.
- Mellanox switch device: SwitchX-2 Switch-IB, Spectrum.
Therefore rephrasing help.
Signed-off-by: NOhad Oz <ohado@mellanox.com>
Acked-by: NLeon Romanovsky <leonro@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Mellanox switches (mlxsw) supports I2C systems without PCI, in order to
give the ability to the users to use such functionality, there is need
to update Kconfig.
Signed-off-by: NOhad Oz <ohado@mellanox.com>
Acked-by: NLeon Romanovsky <leonro@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Using tabs instead of space for indentation.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jiri Pirko says:

====================
mlxsw: spectrum_router: Increase VRF scale

Ido says:

The purpose of this set is to increase the maximum number of supported VRF
devices on top of the Spectrum ASIC under different workloads.

This is achieved by sharing the same LPM tree across all the virtual
routers for a given L3 protocol (IPv4 / IPv6). The change is explained in
detail in the third patch. First two patches are small changes to make
review easier.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The number of LPM trees available for lookup is much smaller than the
number of virtual routers, which are used to implement VRFs. In
addition, an LPM tree can only be used by one protocol - either IPv4 or
IPv6.

Therefore, in order to increase the number of supported virtual routers
to the maximum we need to be able to share LPM trees across virtual
routers instead of trying to find an optimized tree for each.

Do that by allocating one LPM tree for each protocol, but make sure it
will only include prefixes that are actually used, so as to not perform
unnecessary lookups.

Since changing the structure of a bound tree isn't recommended, whenever
a new tree it required, it's first created and then bound to each
virtual router, replacing the old one.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Instead of relying on the LPM tree to be assigned to the virtual router
before binding the two, lets pass it explicitly.

This will later allow us to return upon binding error instead of having
to perform a rollback of the assignment.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There is no point in returning a value from function whose return value
is never checked.

Even if the return value was checked, there wouldn't be anything to do
about it, as these functions are either called from error or deletion
paths.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Refactor code in order to avoid identical code for different branches.

This issue was detected with the help of Coccinelle.
Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>