- 26 9月, 2011 2 次提交
-
-
由 Will Deacon 提交于
The SMP implementation of __futex_atomic_op clobbers oldval with the status flag from the exclusive store. This causes it to always read as zero when performing the FUTEX_OP_CMP_* operation. This patch updates the ARM __futex_atomic_op implementations to take a tmp argument, allowing us to store the strex status flag without overwriting the register containing oldval. Cc: stable@kernel.org Reported-by: NMinho Ban <mhban@samsung.com> Reviewed-by: NNicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
If the attempt to map a page for DMA fails (eg, because we're out of mapping space) then we must not hold on to the page we allocated for DMA - doing so will result in a memory leak. Cc: <stable@kernel.org> Reported-by: NBryan Phillippe <bp@darkforest.org> Tested-by: NBryan Phillippe <bp@darkforest.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 21 9月, 2011 1 次提交
-
-
由 Russell King 提交于
We are seeing linker errors caused by sections being discarded, despite the linker script trying to keep them. The result is (eg): `.exit.text' referenced in section `.alt.smp.init' of drivers/built-in.o: defined in discarded section `.exit.text' of drivers/built-in.o `.exit.text' referenced in section `.alt.smp.init' of net/built-in.o: defined in discarded section `.exit.text' of net/built-in.o This is the relevent part of the linker script (reformatted to make it clearer): | SECTIONS | { | /* | * unwind exit sections must be discarded before the rest of the | * unwind sections get included. | */ | /DISCARD/ : { | *(.ARM.exidx.exit.text) | *(.ARM.extab.exit.text) | } | ... | .exit.text : { | *(.exit.text) | *(.memexit.text) | } | ... | /DISCARD/ : { | *(.exit.text) | *(.memexit.text) | *(.exit.data) | *(.memexit.data) | *(.memexit.rodata) | *(.exitcall.exit) | *(.discard) | *(.discard.*) | } | } Now, this is what the linker manual says about discarded output sections: | The special output section name `/DISCARD/' may be used to discard | input sections. Any input sections which are assigned to an output | section named `/DISCARD/' are not included in the output file. No questions, no exceptions. It doesn't say "unless they are listed before the /DISCARD/ section." Now, this is what asn-generic/vmlinux.lds.S says: | /* | * Default discarded sections. | * | * Some archs want to discard exit text/data at runtime rather than | * link time due to cross-section references such as alt instructions, | * bug table, eh_frame, etc. DISCARDS must be the last of output | * section definitions so that such archs put those in earlier section | * definitions. | */ And guess what - the list _always_ includes .exit.text etc. Now, what's actually happening is that the linker is reading the script, and it finds the first /DISCARD/ output section at the beginning of the script. It continues reading the script, and finds the 'DISCARD' macro at the end, which having been postprocessed results in another /DISCARD/ output section. As the linker already contains the earlier /DISCARD/ output section, it adds it to that existing section, so it effectively is placed at the start. This can be seen by using the -M option to ld: | Linker script and memory map | | 0xc037c080 jiffies = jiffies_64 | | /DISCARD/ | *(.ARM.exidx.exit.text) | *(.ARM.extab.exit.text) | *(.exit.text) | *(.memexit.text) | *(.exit.data) | *(.memexit.data) | *(.memexit.rodata) | *(.exitcall.exit) | *(.discard) | *(.discard.*) | | 0xc0008000 . = 0xc0008000 | | .head.text 0xc0008000 0x1d0 | 0xc0008000 _text = . | *(.head.text) | .head.text 0xc0008000 0x1d0 arch/arm/kernel/head.o | 0xc0008000 stext | | .text 0xc0008200 0x2d78d0 | 0xc0008200 _stext = . | 0xc0008200 __exception_text_start = . | *(.exception.text) | .exception.text | ... As you can see, all the discarded sections are grouped together - and as a result of it being the first output section, they all appear before any other section. The result is that not only is the unwind information discarded (as intended), but also the .exit.text, despite us wanting to have the .exit.text preserved. We can't move the unwind information elsewhere, because it'll then be included even when we do actually discard the .exit.text (and similar) sections. So, work around this by avoiding the generic DISCARDS macro, and instead conditionalize the sections to be discarded ourselves. This avoids the ambiguity in how the linker assigns input sections to output sections, making our script less dependent on undocumented linker behaviour. Reported-by: NRob Herring <robherring2@gmail.com> Tested-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 17 9月, 2011 4 次提交
-
-
由 Russell King 提交于
CALL scripts/checksyscalls.sh <stdin>:46:1: warning: "__IGNORE_migrate_pages" redefined In file included from <stdin>:2: arch/arm/include/asm/unistd.h:482:1: warning: this is the location of the previous definition This is caused because we define __IGNORE_migrate_pages to be 1, but in the case of nommu, it's defined to be empty. Fix this by just defining the __IGNORE_ symbols to be empty. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Will Deacon 提交于
This patch implements a workaround for erratum 764369 affecting Cortex-A9 MPCore with two or more processors (all current revisions). Under certain timing circumstances, a data cache line maintenance operation by MVA targeting an Inner Shareable memory region may fail to proceed up to either the Point of Coherency or to the Point of Unification of the system. This workaround adds a DSB instruction before the relevant cache maintenance functions and sets a specific bit in the diagnostic control register of the SCU. Cc: <stable@kernel.org> Signed-off-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com> Tested-by: NMark Rutland <mark.rutland@arm.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
git://github.com/dtor/input由 Linus Torvalds 提交于
* 'for-linus' of git://github.com/dtor/input: Input: wacom - fix touch parsing on newer Bamboos Input: bcm5974 - add MacBookAir4,1 trackpad support Input: wacom - add POINTER and DIRECT device properties Input: adp5588-keys - remove incorrect modalias Input: cm109 - fix checking return value of usb_control_msg Input: wacom - advertise BTN_TOOL_PEN and BTN_STYLUS for PenPartner Input: wacom - remove pressure for touch devices
-
git://oss.oracle.com/git/kwilk/xen由 Linus Torvalds 提交于
* 'stable/bug.fixes' of git://oss.oracle.com/git/kwilk/xen: xen/i386: follow-up to "replace order-based range checking of M2P table by linear one" xen/irq: Alter the locking to use a mutex instead of a spinlock. xen/e820: if there is no dom0_mem=, don't tweak extra_pages. xen: disable PV spinlocks on HVM
-
- 16 9月, 2011 6 次提交
-
-
git://github.com/tiwai/sound由 Linus Torvalds 提交于
* 'for-linus' of git://github.com/tiwai/sound: ALSA: pcm - fix race condition in wait_for_avail() ALSA: HDA: Cirrus - fix "Surround Speaker" volume control name ALSA: hda - Terminate the recursive connection search properly ASoC: Fix trivial build regression in Kirkwood I2S ASoC: Blackfin: bf5xx-ad193x: Fix codec device name ASoC: Fix reporting of partial jack updates ASoC: imx: Fix build warning of unused 'card' variable ASoC: Fix register cache sync register_writable WARN_ONs ASoC: snd_soc_codec_{readable,writable}_register change default to true ASoC: soc-dapm: Fix parameter comment for snd_soc_dapm_free MAINTAINERS: Add some missed Wolfson files ASoC: MPC5200: replace of_device with platform_device
-
由 Linus Torvalds 提交于
On x86-64, they were just wasteful: with the explicitly added (now unnecessary) padding, the size of the alternatives structure was 16 bytes, and an alignment of 8 bytes didn't hurt much. However, it was still silly, since the natural size and alignment for the structure is actually just 12 bytes, 4-byte aligned since commit 59e97e4d ("x86: Make alternative instruction pointers relative"). So removing the padding, and removing the extra alignment is just a good idea. On x86-32, the alignment of 4 bytes was correct, but was incorrectly hardcoded as 8 bytes in <asm/alternative-asm.h>. That header file had used to be an x86-64 only header file, but various unification efforts have made it be used for x86-32 too (ie the unification of rwlock and rwsem). That in turn caused x86-32 boot failures, because the extra alignment would result in random zero-filled words in the altinstructions section, causing oopses early at boot when doing alternative instruction replacement. So just remove all the alignment noise entirely. It's wrong, and it's unnecessary. The section itself is already properly aligned by the linker scripts, and all additions to the section had better be of the proper 12-byte format, keeping it aligned. So if the align directive were to ever make a difference, that would be an indication of a serious bug to begin with. Reported-by: NWerner Landgraf <w.landgraf@ru.r> Acked-by: NAndrew Lutomirski <luto@mit.edu> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.linux-nfs.org/projects/trondmy/linux-nfs由 Linus Torvalds 提交于
* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: nfs: Do not allow multiple mounts on same mountpoint when using -o noac NFS: Fix a typo in nfs_flush_multi NFSv4: renewd needs to be able to handle the NFS4ERR_CB_PATH_DOWN error NFSv4: The NFSv4.0 client must send RENEW calls if it holds a delegation NFSv4: nfs4_proc_renew should be declared static NFSv4: nfs4_proc_async_renew should use a GFP_NOFS allocation
-
git://github.com/groeck/linux由 Linus Torvalds 提交于
* 'hwmon-for-linus' of git://github.com/groeck/linux: hwmon: (coretemp) Initialize tmin hwmon: (pmbus) Fix low limit temperature alarms
-
由 Christoph Hellwig 提交于
generic_check_addressable can't deal with hfsplus's larger than page size allocation blocks, so simply opencode the checks that we actually need in hfsplus_fill_super. Signed-off-by: NChristoph Hellwig <hch@tuxera.com> Reported-by: NPavel Ivanov <paivanof@gmail.com> Tested-by: NPavel Ivanov <paivanof@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Seth Forshee 提交于
Commit 6596528e ("hfsplus: ensure bio requests are not smaller than the hardware sectors") changed the pointers used for volume header allocations but failed to free the correct pointers in the error path path of hfsplus_fill_super() and hfsplus_read_wrapper. The second hunk came from a separate patch by Pavel Ivanov. Reported-by: NPavel Ivanov <paivanof@gmail.com> Signed-off-by: NSeth Forshee <seth.forshee@canonical.com> Signed-off-by: NChristoph Hellwig <hch@tuxera.com> Cc: <stable@kernel.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 15 9月, 2011 27 次提交
-
-
由 Jan Beulich 提交于
The numbers obtained from the hypervisor really can't ever lead to an overflow here, only the original calculation going through the order of the range could have. This avoids the (as Jeremy points outs) somewhat ugly NULL-based calculation here. Signed-off-by: NJan Beulich <jbeulich@novell.com> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 Konrad Rzeszutek Wilk 提交于
When we allocate/change the IRQ informations, we do not need to use spinlocks. We can use a mutex (which is what the generic IRQ code does for allocations/changes). Fixes a slew of: BUG: sleeping function called from invalid context at /linux/kernel/mutex.c:271 in_atomic(): 1, irqs_disabled(): 0, pid: 3216, name: xenstored 2 locks held by xenstored/3216: #0: (&u->bind_mutex){......}, at: [<ffffffffa02e0920>] evtchn_ioctl+0x30/0x3a0 [xen_evtchn] #1: (irq_mapping_update_lock){......}, at: [<ffffffff8138b274>] bind_evtchn_to_irq+0x24/0x90 Pid: 3216, comm: xenstored Not tainted 3.1.0-rc6-00021-g437a3d1 #2 Call Trace: [<ffffffff81088d10>] __might_sleep+0x100/0x130 [<ffffffff81645c2f>] mutex_lock_nested+0x2f/0x50 [<ffffffff81627529>] __irq_alloc_descs+0x49/0x200 [<ffffffffa02e0920>] ? evtchn_ioctl+0x30/0x3a0 [xen_evtchn] [<ffffffff8138b214>] xen_allocate_irq_dynamic+0x34/0x70 [<ffffffff8138b2ad>] bind_evtchn_to_irq+0x5d/0x90 [<ffffffffa02e03c0>] ? evtchn_bind_to_user+0x60/0x60 [xen_evtchn] [<ffffffff8138c282>] bind_evtchn_to_irqhandler+0x32/0x80 [<ffffffffa02e03a9>] evtchn_bind_to_user+0x49/0x60 [xen_evtchn] [<ffffffffa02e0a34>] evtchn_ioctl+0x144/0x3a0 [xen_evtchn] [<ffffffff811b4070>] ? vfsmount_lock_local_unlock+0x50/0x80 [<ffffffff811a6a1a>] do_vfs_ioctl+0x9a/0x5e0 [<ffffffff811b476f>] ? mntput+0x1f/0x30 [<ffffffff81196259>] ? fput+0x199/0x240 [<ffffffff811a7001>] sys_ioctl+0xa1/0xb0 [<ffffffff8164ea82>] system_call_fastpath+0x16/0x1b Reported-by: NJim Burns <jim_burn@bellsouth.net> Acked-by: NIan Campbell <ian.campbell@citrix.com> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 Arjan van de Ven 提交于
wait_for_avail() in pcm_lib.c has a race in it (observed in practice by an Intel validation group). The function is supposed to return once space in the buffer has become available, or if some timeout happens. The entity that creates space (irq handler of sound driver and some such) will do a wake up on a waitqueue that this function registers for. However there are two races in the existing code 1) If space became available between the caller noticing there was no space and this function actually sleeping, the wakeup is missed and the timeout condition will happen instead 2) If a wakeup happened but not sufficient space became available, the code will loop again and wait for more space. However, if the second wake comes in prior to hitting the schedule_timeout_interruptible(), it will be missed, and potentially you'll wait out until the timeout happens. The fix consists of using more careful setting of the current state (so that if a wakeup happens in the main loop window, the schedule_timeout() falls through) and by checking for available space prior to going into the schedule_timeout() loop, but after being on the waitqueue and having the state set to interruptible. [tiwai: the following changes have been added to Arjan's original patch: - merged akpm's fix for waitqueue adding order into a single patch - reduction of duplicated code of avail check ] Signed-off-by: NArjan van de Ven <arjan@linux.intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Cc: <stable@kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Shaohua Li 提交于
The found entries by find_get_pages() could be all swap entries. In this case we skip the entries, but make sure the skipped entries are accounted, so we don't keep looping. Using nr_found > nr_skip to simplify code as suggested by Eric. Reported-and-tested-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NShaohua Li <shaohua.li@intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Russell King 提交于
Building a kernel with hotplug disabled results in a link failure: `bgpio_remove' referenced in section `___ksymtab_gpl+bgpio_remove' of drivers/built-in.o: defined in discarded section `.devexit.text' of drivers/built-in.o This is because of bgpio_remove() is exported. It is illegal to export symbols which are discarded either at link time or as part of an init/exit section. Fix this by dropping the __devexit attributation from bgpio_remove(). Also drop the __devinit attributation from bgpio_init(). Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Thomas Tuttle 提交于
Take cwq->gcwq->lock to avoid racing between drain_workqueue checking to make sure the workqueues are empty and cwq_dec_nr_in_flight decrementing and then incrementing nr_active when it activates a delayed work. We discovered this when a corner case in one of our drivers resulted in us trying to destroy a workqueue in which the remaining work would always requeue itself again in the same workqueue. We would hit this race condition and trip the BUG_ON on workqueue.c:3080. Signed-off-by: NThomas Tuttle <ttuttle@chromium.org> Acked-by: NTejun Heo <tj@kernel.org> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Benny Halevy 提交于
Acked-by: NBoaz Harrosh <bharrosh@panasas.com> Signed-off-by: NBenny Halevy <bhalevy@tonian.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Naga Chumbalkar 提交于
per_cpu(processors, n) can be NULL, resulting in: Loading CPUFreq modules[ 437.661360] BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffffa0434314>] pcc_cpufreq_cpu_init+0x74/0x220 [pcc_cpufreq] It's better to avoid the oops by failing the driver, and allowing the system to boot. Signed-off-by: NNaga Chumbalkar <nagananda.chumbalkar@hp.com> Cc: Dave Jones <davej@codemonkey.org.uk> Cc: Len Brown <lenb@kernel.org> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Donggeun Kim 提交于
The driver does not generate an alarm interrupt even though a time for an alarm is set. This results from disabling rtc_clk after setting the alarm time. To generate an alarm interrupt the driver should maintain its enabled state for rtc_clk the until alarm interrupt occurs. This patch permits generation of an alarm interrupt. [akpm@linux-foundation.org: make s3c_rtc_alarm_clk_lock local to s3c_rtc_alarm_clk_enable()] Signed-off-by: NDonggeun Kim <dg77.kim@samsung.com> Signed-off-by: NMyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Johan Hovold 提交于
Fix regression introduced by commit 5ada28bf ("led-class: always implement blinking") which broke sysfs delay handling by not storing the updated value. Consequently it was only possible to set one of the delays through the sysfs interface as the other delay was automatically restored to it's default value. Reading the parameters always gave the defaults. Signed-off-by: NJohan Hovold <jhovold@gmail.com> Acked-by: NFlorian Fainelli <florian@openwrt.org> Acked-by: NRichard Purdie <richard.purdie@linuxfoundation.org> Cc: <stable@kernel.org> [2.6.37+] Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jesper Juhl 提交于
In drivers/misc/pti.c::pti_control_frame_built_and_sent() we assign 'comm' to 'thread_name_p' if (!thread_name). The problem is that 'comm' then goes out of scope and later we use 'thread_name_p' which now refers to an out-of-scope variable. To fix that, simply move 'comm' up to have function scope. Signed-off-by: NJesper Juhl <jj@chaosbits.net> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: J Freyensee <james_p_freyensee@linux.intel.com> Cc: Jeremy Rocher <rocher.jeremy@gmail.com> Cc: Sergei Trofimovich <slyfox@gentoo.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 WANG Cong 提交于
Fix these errors: drivers/tty/serial/crisv10.c:4453: error: 'if_ser0' undeclared (first use in this function): 2 errors in 2 logs drivers/tty/serial/crisv10.c:4453: error: (Each undeclared identifier is reported only once: 2 errors in 2 logs drivers/tty/serial/crisv10.c:4453: error: for each function it appears in.): 2 errors in 2 logs "if_ser0" is a typo, it should be "if_serial_0". Signed-off-by: NWANG Cong <xiyou.wangcong@gmail.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Vrabel 提交于
Xen backend drivers (e.g., blkback and netback) would sometimes fail to map grant pages into the vmalloc address space allocated with alloc_vm_area(). The GNTTABOP_map_grant_ref would fail because Xen could not find the page (in the L2 table) containing the PTEs it needed to update. (XEN) mm.c:3846:d0 Could not find L1 PTE for address fbb42000 netback and blkback were making the hypercall from a kernel thread where task->active_mm != &init_mm and alloc_vm_area() was only updating the page tables for init_mm. The usual method of deferring the update to the page tables of other processes (i.e., after taking a fault) doesn't work as a fault cannot occur during the hypercall. This would work on some systems depending on what else was using vmalloc. Fix this by reverting ef691947 ("vmalloc: remove vmalloc_sync_all() from alloc_vm_area()") and add a comment to explain why it's needed. Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com> Cc: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Ian Campbell <Ian.Campbell@citrix.com> Cc: Keir Fraser <keir.xen@gmail.com> Cc: <stable@kernel.org> [3.0.x] Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Johannes Weiner 提交于
Revert the post-3.0 commit 82f9d486 ("memcg: add memory.vmscan_stat"). The implementation of per-memcg reclaim statistics violates how memcg hierarchies usually behave: hierarchically. The reclaim statistics are accounted to child memcgs and the parent hitting the limit, but not to hierarchy levels in between. Usually, hierarchical statistics are perfectly recursive, with each level representing the sum of itself and all its children. Since this exports statistics to userspace, this may lead to confusion and problems with changing things after the release, so revert it now, we can try again later. Signed-off-by: NJohannes Weiner <jweiner@redhat.com> Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Michal Hocko <mhocko@suse.cz> Cc: Ying Han <yinghan@google.com> Cc: Balbir Singh <bsingharora@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Johannes Weiner 提交于
Without swap, anonymous pages are not scanned. As such, they should not count when considering force-scanning a small target if there is no swap. Otherwise, targets are not force-scanned even when their effective scan number is zero and the other conditions--kswapd/memcg--apply. This fixes 246e87a9 ("memcg: fix get_scan_count() for small targets"). [akpm@linux-foundation.org: fix comment] Signed-off-by: NJohannes Weiner <jweiner@redhat.com> Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: NMichal Hocko <mhocko@suse.cz> Cc: Ying Han <yinghan@google.com> Cc: Balbir Singh <bsingharora@gmail.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Acked-by: NMel Gorman <mel@csn.ul.ie> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Axel Lin 提交于
Include linux/sched.h to fix below build error. CC drivers/rtc/rtc-imxdi.o drivers/rtc/rtc-imxdi.c: In function 'di_write_wait': drivers/rtc/rtc-imxdi.c:168: error: 'TASK_INTERRUPTIBLE' undeclared (first use in this function) drivers/rtc/rtc-imxdi.c:168: error: (Each undeclared identifier is reported only once drivers/rtc/rtc-imxdi.c:168: error: for each function it appears in.) drivers/rtc/rtc-imxdi.c:168: error: implicit declaration of function 'signal_pending' drivers/rtc/rtc-imxdi.c:168: error: implicit declaration of function 'schedule_timeout' drivers/rtc/rtc-imxdi.c: In function 'dryice_norm_irq': drivers/rtc/rtc-imxdi.c:329: error: 'TASK_INTERRUPTIBLE' undeclared (first use in this function) Signed-off-by: NAxel Lin <axel.lin@gmail.com> Cc: Baruch Siach <baruch@tkos.co.il> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ben Hutchings 提交于
Since GPIOLIB is optional on alpha, GENERIC_GPIO must not be selected by default. If GPIOLIB is enabled, it will select GENERIC_GPIO. See <http://bugs.debian.org/638696> for an example of what 'def_bool y' breaks. Reported-by: NMichael Cree <mcree@orcon.net.nz> Signed-off-by: NBen Hutchings <ben@decadent.org.uk> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Cree <mcree@orcon.net.nz> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Al Viro 提交于
richard@nod.at: Fixes: /usr/lib/gcc/x86_64-linux-gnu/4.4.5/../../../../lib/libc.a(strrchr.o): In function `rindex': (.text+0x0): multiple definition of `strrchr' If both STATIC_LINK and UML_NET_VDE are set to "y" libc's strrchr may clash with the kernel implementation. This workaround comes originally from Jeff Dike: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=494995#35Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NRichard Weinberger <richard@nod.at> Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Al Viro 提交于
1) take subarch-specific stuff to subarch_ptrace() 2) PTRACE_{PEEK,POKE}{TEXT,DATA} is handled by ptrace_request() just fine... Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NRichard Weinberger <richard@nod.at> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Al Viro 提交于
It's 32bit-only, not 64bit-only... And while we are at it, it's set_fpxregs(), not set_fpregs()... Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NRichard Weinberger <richard@nod.at> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Al Viro 提交于
while not doing free_irq() from irq handler is commendable, kfree() on the data passed to said handler before free_irq() is Not Good(tm). Freeing the stack it's being run on is also not nice... Solution: delay actually freeing stuff. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NRichard Weinberger <richard@nod.at> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Al Viro 提交于
... so set winch->fd to -1 before doing free_irq(), to avoid having winch_interrupt() come from/during the latter and attempt to do reactivate_fd() on something that's already gone. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NRichard Weinberger <richard@nod.at> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Al Viro 提交于
tty->count is decremented only after ->close() had been called and several tasks can hit it in parallel. As the result, using tty->count to check if you are the last one is broken. We end up leaving line->tty not reset to NULL and the next IRQ on that sucker will blow up trying to dereference pointers from kfree'd struct tty. Fix is obvious: we need to use a counter of our own. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NRichard Weinberger <richard@nod.at> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ingo van Lil 提交于
Some time ago Jeff prepared 42daba31 ("uml: stop saving process FP state") for UML to stop saving the process FP state between task switches. The assumption was that since with SKAS0 every guest process runs inside a host process context the host OS will take care of keeping the proper FP state. Unfortunately this is not true for multi-threaded applications, where all guest threads share a single host process context yet all may use the FPU on their own. Although I haven't verified it I suspect things to be even worse in SKAS3 mode where all guest processes run inside a single host process. The patch reintroduces the saving and restoring of the FP context between task switches. [richard@nod.at: Ingo posted this patch in 2009, sadly it was never applied and got lost. Now in 2011 the problem was reported by Gunnar.] Signed-off-by: NIngo van Lil <inguin@gmx.de> Signed-off-by: NRichard Weinberger <richard@nod.at> Reported-by: <gunnarlindroth@hotmail.com> Tested-by: <gunnarlindroth@hotmail.com> Cc: Stanislav Meduna <stano@meduna.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jonathan Neuschäfer 提交于
I could use out_close1, but that seems to be the code path to close the fd returned by os_create_unix_socket, and using it to close the fd returned by mkstemp might lead to some confusion, so I don't do it. Signed-off-by: NJonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: NRichard Weinberger <richard@nod.at> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
Commit b789ef51 ("slub: Add cmpxchg_double_slab()") tests for cmpxchg_double support in the SLUB code and it breaks UML builds with SLUB. Since UML does not support checking for CPU features, disable CMPXCHG_DOUBLE just like CMPXCHG_LOCAL is disabled for UML. Signed-off-by: NThadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Reviewed-by: NChristoph Lameter <cl@linux.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Signed-off-by: NRichard Weinberger <richard@nod.at> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Rientjes 提交于
The vmstat_text array is only defined for CONFIG_SYSFS or CONFIG_PROC_FS, yet it is referenced for per-node vmstat with CONFIG_NUMA: drivers/built-in.o: In function `node_read_vmstat': node.c:(.text+0x1106df): undefined reference to `vmstat_text' Introduced in commit fa25c503 ("mm: per-node vmstat: show proper vmstats"). Define the array for CONFIG_NUMA as well. [akpm@linux-foundation.org: remove unneeded ifdefs] Signed-off-by: NDavid Rientjes <rientjes@google.com> Reported-by: NCong Wang <amwang@redhat.com> Acked-by: NRandy Dunlap <rdunlap@xenotime.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-