- 28 4月, 2007 3 次提交
-
-
由 Hartmut Hackmann 提交于
These entries mainly are to support configurations of the tda827x silicon tuner with a preamplifier. The values can be set throgh the attach inform or through the extended TUNER_SET_TYPE_ADDR client call. The function pointer will only be updated if the parameter is not NULL. Since a typecast is necessary to set the pointer, i added a typedef for this pointer (tuner_gpio_func_t) in tuner.h Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Hartmut Hackmann 提交于
This function allows to set, clear and tristate the GPIO ports. Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Hartmut Hackmann 提交于
There are the following changes: - separate configuration of IF and GPIOs. - set GPIOs before firmware load. This helps to avoid I2C address collisions. - if desired invert GPIOs at sleep (automatic return to analog mode of card). - added 3 tuner configuration bytes to config stuct. - added i2c gate address to config struct. - moved _state struct declaration to header file to make it accessible on board layer. - added "conf_probed" to the state struct to allow i.e. probing for correct tuner version. - changed firmware load mechanism to always: + check if already loaded + try to boot from eeprom + try downlad from host - corrected name of tda10046 firmware image (backward compatible). Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 21 2月, 2007 8 次提交
-
-
由 Richard Knutsson 提交于
Signed-off-by: NRichard Knutsson <ricknu-0@student.ltu.se> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Trent Piepho 提交于
The out of tree v4l-dvb build system didn't always override the kernel's configuration settings with v4l-dvb's settings correctly. To work around this, makefiles would define some new macro based on the setting of a config variable. e.g. the pwc Makefile would define CONFIG_PWC_DEBUG if CONFIG_USB_PWC_DEBUG (which is defined via Kconfig) was set. The v4l-dvb build system should now always override correctly, and this is no longer necessary. This patch gets ride of these extra defines and just uses the CONFIG_* settings directly. Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
Add support for Terratec Cinergy HT PCI Signed-off-by: NGiorgio Moscardi <software@sukkology.net> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Adrian Bunk 提交于
This patch fixes the following compile error: <-- snip --> ... LD drivers/media/video/built-in.o drivers/media/video/saa7134/built-in.o:(.data+0x85ec): multiple definition of `ir_rc5_remote_gap' drivers/media/video/bt8xx/built-in.o:(.data+0x734c): first defined here drivers/media/video/saa7134/built-in.o:(.data+0x85f0): multiple definition of `ir_rc5_key_timeout' drivers/media/video/bt8xx/built-in.o:(.data+0x7350): first defined here make[4]: *** [drivers/media/video/built-in.o] Error 1 <-- snip --> Since this variables were needlessly global, this patch implements the trivial fix of making them static. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Juan Pablo Sormani 提交于
Signed-off-by: NJuan Pablo Sormani <sorman@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Steven Walter 提交于
Add a board definition for the Encore ENL-TV card, and adds its PCI subdevice to the ID table. Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Hermann Pitton 提交于
This makes a second CVBS input available. Signed-off-by: NHermann Pitton <hermann-pitton@arcor.de> Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Hermann Pitton 提交于
Besides adding the board specific code, this patch moves the RC5 decoding code from bt8xx to ir-functions.c to make it available for all drivers. Signed-off-by: Marc Fargas <telenieko.telenieko.com> Signed-off-by: NHermann Pitton <hermann-pitton@arcor.de> Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 15 2月, 2007 1 次提交
-
-
由 Tim Schmielau 提交于
After Al Viro (finally) succeeded in removing the sched.h #include in module.h recently, it makes sense again to remove other superfluous sched.h includes. There are quite a lot of files which include it but don't actually need anything defined in there. Presumably these includes were once needed for macros that used to live in sched.h, but moved to other header files in the course of cleaning it up. To ease the pain, this time I did not fiddle with any header files and only removed #includes from .c-files, which tend to cause less trouble. Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha, arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig, allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all configs in arch/arm/configs on arm. I also checked that no new warnings were introduced by the patch (actually, some warnings are removed that were emitted by unnecessarily included header files). Signed-off-by: NTim Schmielau <tim@physik3.uni-rostock.de> Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 13 2月, 2007 1 次提交
-
-
由 Arjan van de Ven 提交于
Many struct file_operations in the kernel can be "const". Marking them const moves these to the .rodata section, which avoids false sharing with potential dirty data. In addition it'll catch accidental writes at compile time to these shared resources. [akpm@sdl.org: dvb fix] Signed-off-by: NArjan van de Ven <arjan@linux.intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 16 1月, 2007 1 次提交
-
-
由 hermann pitton 提交于
- MSI TV@nywhere Plus. Fix radio, S-Video and external analog audio in as far we can know currently. Signed-off-by: NHermann Pitton <hermann-pitton@arcor.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 28 12月, 2006 1 次提交
-
-
由 Stephan Berberig 提交于
Fix a typo (use_frontent -> use_frontend) in saa7134-dvb.c. Signed-off-by: NStephan Berberig <s.berberig@arcor.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 10 12月, 2006 13 次提交
-
-
由 Thomas Genty 提交于
This patch adds support for the remote control bundled with the Hauppauge HVR1110 Signed-off-by: NThomas Genty <tomlohave@gmail.com> Signed-off-by: NNickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Hartmut Hackmann 提交于
The change does the following: - At device open, it sets the recording source to the current input instead of LINE2. So it is no longer necessary to set the recording source with a mixer application. - Connects the mixer volume control to the input sensitivity selection of the analog sound inputs. This allows only one 6db step. Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Dmitry Torokhov 提交于
Also sprinkled some input_sync() throughout the code. Acked-by: NRicardo Cerqueira <v4l@cerqueira.org> Acked-by: NOliver Endriss <o.endriss@gmx.de> Acked-by: NAndrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: NDmitry Torokhov <dtor@mail.ru> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Nico Sabbi 提交于
This card (like some others) supports both, DVB-T and a DVB-S. The patch adds an insmod option to select the frontend: use_frontend=0 -> DVB-T use_frontend=1 -> DVB-S Signed-off-by: NNico Sabbi <nsabbi@tiscali.it> Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Hartmut Hackmann 提交于
This is a hybrid cardbus module. Besides the card support, i modified the definition names for AGC and GPIO of the tda10046. Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Thomas Genty 提交于
This patch adds support for the Hauppauge WinTV-HVR1110 DVB-T/Hybrid Signed-off-by: NThomas Genty <tomlohave@gmail.com> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Hartmut Hackmann 提交于
This board has the same PCI ID as the T200, so the exact board type is determined from the eeprom. The original patch was provided by Francis Barber <fedora@barber-family.id.au> Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Hartmut Hackmann 提交于
In case the exact board type needs to be determined by probing or evaluating the eeprom, this flag allows to still set the board type via the card=xx insmod option. This is an extract of a patch by Francis Barber. Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Hartmut Hackmann 提交于
This card has no firmware eeprom. The old version still should not need a firmware file due to an undocumented feature of the TDA10046. The patch also includes Hermann Pitton's proposal for improved antenna switch handling Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Hermann Pitton 提交于
The gate control was moved to a separate function. Signed-off-by: NHermann Pitton <hermann-pitton@arcor.de> Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Hartmut Hackmann 提交于
The remote control works, but we still need a better keymap. Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mikhail Fedotov 提交于
This is just an additional analog board configuration. Signed-off-by: Mikhail Fedotov <mo_fedotov.mail.ru> Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Hartmut Hackmann 提交于
The driver supports analog TV, radio and DVB-T. It is based on the preliminary patch by Pierluigi Rolando. Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 22 11月, 2006 1 次提交
-
-
由 David Howells 提交于
Fix up for make allyesconfig. Signed-Off-By: NDavid Howells <dhowells@redhat.com>
-
- 14 11月, 2006 1 次提交
-
-
由 Linus Torvalds 提交于
Commit 450efcfd broke Avermedia 777 support. Added obvious missing "break" statement. Cc: Jos Surez <j.suarez.agapito@gmail.com> Cc: Michael Krufky <mkrufky@linuxtv.org> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 13 11月, 2006 3 次提交
-
-
由 pasky@ucw.cz 提交于
This changes it from TDA8290 which is allegedly very unlikely to TD1316 which is allegedly very likely. I didn't get it to work with either, but expected that this got applied when Mauro sent it to me, so here it goes again; feel free to drop it to the floor. :-) Signed-off-by: NPetr Baudis <pasky@ucw.cz> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 pasky@ucw.cz 提交于
The remote as well as the GPIO interface is the same as what comes with 777. For an example of mplayer lirc configuration, see http://pasky.or.cz/~pasky/dev/v4l/lircrcSigned-off-by: NPetr Baudis <pasky@ucw.cz> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 pasky@ucw.cz 提交于
I didn't test it personally since I don't have this card, but A16AR uses the same interface and that one certainly does work perfectly (see the next patch). This patch was originally sent in http://marc.theaimsgroup.com/?l=linux-video&m=114743413825375&w=2 https://www.redhat.com/mailman/private/video4linux-list/2006-May/msg00103.html but never got applied. This version has some trivial modifications and drops the weird gpio hack (it's not clear what practical purpose does it serve). Signed-off-by: NJose Alberto Reguero <jareguero@telefonica.net> Signed-off-by: NPetr Baudis <pasky@ucw.cz> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 03 11月, 2006 1 次提交
-
-
由 Hartmut Hackmann 提交于
The board did not return to analog mode since the board specific "demod sleep" function was not called. Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 14 10月, 2006 1 次提交
-
-
由 Hartmut Hackmann 提交于
This patch adds readout for stereo and signal level for saa713x cards which use the saa713x as FM demodulator. These are many cards based on saa7133, tda8290 and tda8275a. FM channel search should work now. Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 05 10月, 2006 1 次提交
-
-
由 David Howells 提交于
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: NDavid Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
-
- 04 10月, 2006 4 次提交
-
-
由 Hartmut Hackmann 提交于
The variable fixup could be used uninitialized. Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Hartmut Hackmann 提交于
This is a analog DVB-T hybrid board Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Hermann Pitton 提交于
This patch forces the correct antenna input input in DVB-T mode for this card. Signed-off-by: NHermann Pitton <hermann-pitton@arcor.de> Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Hartmut Hackmann 提交于
This change fixes the following issues: - resolve the SECAM D/K vs SECAM-L sound conflict It is now possible to select the SECAM version either by the VIDEOIOC_S_STD IO control or by the new secam= insmod option. The driver now adapts its audio standard search list to the selected standard. - don't trigger a sound standard search when a LINE input is selected. Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-