- 28 7月, 2011 40 次提交
-
-
由 Peter Moon 提交于
This patch adds support for the "Hauppauge WinTV USB2-FM" Analog TV Stick. It includes support for both the PAL and NTSC variants of the device. Signed-off-by: NPeter Moon <pomoon@gmail.com> Reviewed-by: NDevin Heitmueller <dheitmueller@hauppauge.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Justin P. Mattock 提交于
Changes clock_settting to clock_setting. Note: This could be intentionally set this way from the beginning and/or is a typo. Signed-off-by: NJustin P. Mattock <justinmattock@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 istvan_v@mailbox.hu 提交于
The following patch replaces code to reset the XC3028 tuner with a call to the tuner reset callback. Signed-off-by: NIstvan Varga <istvan_v@mailbox.hu> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 istvan_v@mailbox.hu 提交于
This patch implements support for the Leadtek WinFast DTV1800 H card with XC4000 tuner (107d:6f38). Signed-off-by: NIstvan Varga <istvan_v@mailbox.hu> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 istvan_v@mailbox.hu 提交于
This patch implements support for the Leadtek WinFast DTV2000 H Plus card with XC4000 tuner (107d:6f42). Signed-off-by: NIstvan Varga <istvan_v@mailbox.hu> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 istvan_v@mailbox.hu 提交于
Added functions for XC4000 tuner reset and attaching DVB frontend. Signed-off-by: NIstvan Varga <istvan_v@mailbox.hu> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
This board were used for testing the em28xx-alsa using a separate interface. So, it is obviously validated ;) Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Some devices use a separate interface for the vendor audio class. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Mark the alsa stream with SNDRV_PCM_INFO_BATCH, as the timing to get audio streams can vary. Also, add SNDRV_PCM_TRIGGER for pause/release. while here, fix the stop indicator, to be sure that audio will be properly released at the stop events. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
If the audio stream fails for any reason, it should: 1) Report an error via dmesg; 2) Mark internally that the stream didn't started. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
While here, fix volume mask to 5 bits Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Export ac97 volume controls via mixer. Pulseaudio will probably handle it very badly, as it has no idea about how volumes are wired, and how are they associated with each TV input. Those wirings are card model dependent, and we don't have the wiring mappings for each supported device. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Fixes most cases of initializing a var but not using it. There are still 3 cases at em28xx-alsa, were those vars should probably be used. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Jonathan Corbet 提交于
Now we have a camera working over the marvell cam controller core. It works like the cafe driver and has all the same limitations, contiguous DMA only being one of them. But it's a start. Signed-off-by: NJonathan Corbet <corbet@lwn.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Jonathan Corbet 提交于
The upcoming mmp-camera driver will need an i2c_adapter structure allocated externally, so change the core adapter to a pointer and require the platform code to fill it in. Signed-off-by: NJonathan Corbet <corbet@lwn.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Jonathan Corbet 提交于
This makes the cafe i2c implement consistent with the rest of Linux so that the core can use the same slave ID everywhere. Signed-off-by: NJonathan Corbet <corbet@lwn.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Jonathan Corbet 提交于
Nobody else ever needs to see these, so let's hide them. Signed-off-by: NJonathan Corbet <corbet@lwn.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Jonathan Corbet 提交于
This code is, indeed, tested :) Signed-off-by: NJonathan Corbet <corbet@lwn.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Jonathan Corbet 提交于
Depending on the controller, the ov7670 sensor may be told to work with a different clock speed or to use the SMBUS protocol. Remove the wired-in code and pass that information from the platform layer. The Cafe driver now just assumes it's running on an OLPC XO 1; I do not believe it has ever run anywhere else. Cc: Daniel Drake <dsd@laptop.org> Signed-off-by: NJonathan Corbet <corbet@lwn.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Jonathan Corbet 提交于
There will eventually be multiple users of the core camera controller, so separate it from the bus/platform/i2c stuff. I've tried to do the minimal set of changes to get the driver functioning in this configuration; I did clean up a bunch of old checkpatch gripes in the process. This driver works like the old one did on OLPC XO 1 systems. Cc: Daniel Drake <dsd@laptop.org> Signed-off-by: NJonathan Corbet <corbet@lwn.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Jonathan Corbet 提交于
This driver will soon become a family of drivers, so let's give it its own place to live. This move requires putting ov7670.h into include/media, but there are no code changes. Cc: Daniel Drake <dsd@laptop.org> Signed-off-by: NJonathan Corbet <corbet@lwn.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
The patch utility doesn't work with non-binary files. This causes some tools to break, like generating tarball targets and the scripts that generate diff patches at http://www.kernel.org/pub/linux/kernel/v2.6/. So, let's convert all binaries to ascii using base64, and add a logic at Makefile to convert them back into binaries at runtime. Reported-by: NRandy Dunlap <randy.dunlap@oracle.com> Reported-by: NAndrew Morton <akpm@linux-foundation.org> Reviewed-by: NMichal Marek <mmarek@suse.cz> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Andre Bartke 提交于
cxsc is not freed in the error case. Signed-off-by: NAndre Bartke <andre.bartke@gmail.com> Cc: Andy Walls <awalls@md.metrocast.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Petter Selasky 提交于
>From 70d02ce19f64fae4ceee563501e8462a76e17b91 Mon Sep 17 00:00:00 2001 Signed-off-by: NHans Petter Selasky <hselasky@c2i.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Petter Selasky 提交于
>From 0dd2949dfeae431ed4ffbd00fd14a10dc3747ad0 Mon Sep 17 00:00:00 2001 Signed-off-by: NHans Petter Selasky <hselasky@c2i.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Petter Selasky 提交于
Make sure the return value is set in all cases >From 9b38a5c9878b5e4be2899ae291c4524f5f5fc218 Mon Sep 17 00:00:00 2001 Signed-off-by: NHans Petter Selasky <hselasky@c2i.net> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 David Härdeman 提交于
Durations can never be negative, so it makes sense to consistently use unsigned int for LIRC transmission. Contrary to the initial impression, this shouldn't actually change the userspace API. Signed-off-by: NDavid Härdeman <david@hardeman.nu> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
removes obsolete comments. updates firmware versions. firmware vendor request simplified. Signed-off-by: NDean Anderson <linux-dev@sensoray.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
While here, remove the mediaindexdocs from PHONY. Reported-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Based on those feedback: http://www.spinics.net/lists/linux-media/msg33704.html http://www.spinics.net/lists/linux-media/msg33700.html I'm reverting the removal of this unused ioctl, as it seems that some drivers under development may be using. So, I'll wait until the next merge window before removing those unused ioctls, to give a chance for developers to submit their pending work. This reverts commit db48923da6c528d461b5e764692239eb9c1b7a00. Cc: Andreas Oberritter <obi@linuxtv.org> Cc: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Now, all data structures are commented. A few ioctls remain undocumented: Error: no ID for constraint linkend: VIDEO_GET_SIZE. Error: no ID for constraint linkend: VIDEO_GET_FRAME_RATE. Error: no ID for constraint linkend: VIDEO_GET_PTS. Error: no ID for constraint linkend: VIDEO_GET_FRAME_COUNT. Error: no ID for constraint linkend: VIDEO_COMMAND. Error: no ID for constraint linkend: VIDEO_TRY_COMMAND. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Make the reference links at video.h.xml to match the ones at video.xml. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
The av7110 uses an OSD API. Such API is not documented at all. Also, the osd.h API uses camelCase and some other weird stuff. Also, dvb-core doesn't recognize it. I don't see any good reason why we should document it. It seems better to just let it as-is. If ever needed, it is probably better to write a different API for dvb-core. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
There's no documentation at all for the DVB net API. Still, better to remove a few warnings about the missing symbols. So, add the net data structure inside the net.xml. Now, only the ioctl documentation is missed. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Still, there are a few ioctl's not documented: Error: no ID for constraint linkend: DMX_GET_PES_PIDS. Error: no ID for constraint linkend: DMX_GET_CAPS. Error: no ID for constraint linkend: DMX_SET_SOURCE. Error: no ID for constraint linkend: DMX_ADD_PID. Error: no ID for constraint linkend: DMX_REMOVE_PID. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Make the reference links at dmx.h.xml to match the ones at demux.xml. While here, also syncronizes the structures defined inside the API, in order to match the current API. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-