One change introduced by the workqueue removal patch is that adding an
interface that is up to a bridge which is also up does not ever call
br_stp_enable_port(), leaving the port in DISABLED state until we do
ifconfig down and up or link events occur.

The following patch to the br_add_if function fixes it.
This is a regression introduced in 2.6.21.

Submitted-by: Aji_Srinivas@emc.com
Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Having a work queue for checking carrier leads to lots of race issues.
Simpler to just get the cost when data structure is created and
update on change.
Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NJarek Poplawski <jarkao2@o2.pl>
Acked-by: NStephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This lets the network core have the ability to handle suspend/resume
issues, if it wants to.

Thanks to Frederik Deweerdt <frederik.deweerdt@gmail.com> for the arm
driver fixes.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Fix up for make allyesconfig.
Signed-Off-By: NDavid Howells <dhowells@redhat.com>

Flush the forwarding table when carrier is lost. This helps for
availability because we don't want to forward to a downed device and
new packets may come in on other links.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When the bridge recomputes features, it does not maintain the
constraint that SG/GSO must be off if TX checksum is off.
This patch adds that constraint.

On a completely unrelated note, I've also added TSO6 and TSO_ECN
feature bits if GSO is enabled on the underlying device through
the new NETIF_F_GSO_SOFTWARE macro.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When GSO packets come from an untrusted source (e.g., a Xen guest domain),
we need to verify the header integrity before passing it to the hardware.

Since the first step in GSO is to verify the header, we can reuse that
code by adding a new bit to gso_type: SKB_GSO_DODGY.  Packets with this
bit set can only be fed directly to devices with the corresponding bit
NETIF_F_GSO_ROBUST.  If the device doesn't have that bit, then the skb
is fed to the GSO engine which will allow the packet to be sent to the
hardware if it passes the header check.

This patch changes the sg flag to a full features flag.  The same method
can be used to implement TSO ECN support.  We simply have to mark packets
with CWR set with SKB_GSO_ECN so that only hardware with a corresponding
NETIF_F_TSO_ECN can accept them.  The GSO engine can either fully segment
the packet, or segment the first MTU and pass the rest to the hardware for
further segmentation.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds a generic segmentation offload toggle that can be turned
on/off for each net device.  For now it only supports in TCPv4.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As it is the bridge will only ever declare NETIF_F_IP_CSUM even if all
its constituent devices support NETIF_F_HW_CSUM.  This patch fixes
this by supporting the first one out of NETIF_F_NO_CSUM,
NETIF_F_HW_CSUM, and NETIF_F_IP_CSUM that is supported by all
constituent devices.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The current stack treats NETIF_F_HW_CSUM and NETIF_F_NO_CSUM
identically so we test for them in quite a few places.  For the sake
of brevity, I'm adding the macro NETIF_F_GEN_CSUM for these two.  We
also test the disjunct of NETIF_F_IP_CSUM and the other two in various
places, for that purpose I've added NETIF_F_ALL_CSUM.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There are several bugs in error handling in br_add_bridge:
- when dev_alloc_name fails, allocated net_device is not freed
- unregister_netdev is called when rtnl lock is held
- free_netdev is called before netdev_run_todo has a chance to be run after
  unregistering net_device
Signed-off-by: NJiri Benc <jbenc@suse.cz>
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Now that netdevice sysfs registration is done as part of
register_netdevice; bridge code no longer has to be tricky when adding
it's kobjects to bridges.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use kzalloc versus kmalloc+memset. Also don't need to do
memset() of bridge address since it is in netdev private data
that is already zero'd in alloc_netdev.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use kcalloc rather than kmalloc + memset.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The earlier round of kobject/sysfs changes to bridge caused
it not to generate a uevent on removal. Don't think any application
cares (not sure about Xen) but since it generates add uevent
it should generate remove as well.
Signed-off-by: NStephen Hemminger <shemmigner@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Initialize the STP timers for a port when it is created,
rather than when it is enabled. This will prevent future race conditions
where timer gets started before port is enabled.
Signed-off-by: NStephen Hemminger <shemmigner@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Bridge would crash because of uninitailized timer if STP is used and
device was inserted into a bridge before bridge was up. This got
introduced when the delayed port checking was added.  Fix is to not
enable STP on port unless bridge is up.

Bugzilla: http://bugzilla.kernel.org/show_bug.cgi?id=6140
Dup:      http://bugzilla.kernel.org/show_bug.cgi?id=6156Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Refactor how the bridge code interacts with kobject system.
It should still use kobjects even if not using sysfs.
Fix the error unwind handling in br_add_if.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Change Bridge receive path to correctly handle RCU removal of device
from bridge.  Also fixes deadlock between carrier_check and del_nbp.
This replaces the previous deleted flag fix.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This is a simpler fix for the two races in bridge device removal.
The Xen race of delif and notify is managed now by a new deleted flag.
No need for barriers or other locking because of rtnl mutex.

The del_timer_sync()'s are unnecessary, because br_stp_disable_port
delete's the timers, and they will finish running before RCU callback.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

These patches add the header linux/if_ether.h and change 1500 to
ETH_DATA_LEN in some files.
Signed-off-by: NKris Katterjohn <kjak@users.sourceforge.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add limited ethtool support to bridge to allow disabling
features.

Note: if underlying device does not support a feature (like checksum
offload), then the bridge device won't inherit it.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Speed of a interface may not be available until carrier
is detected in the case of autonegotiation. To get the correct value
we need to recheck speed after carrier event.  But the check needs to
be done in a context that is similar to normal ethtool interface (can sleep).

Also, delay check for 1ms to try avoid any carrier bounce transitions.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We must recompute bridge features everytime the list of underlying 
devices changes, or we might end up with features that are not
supported by all devices (eg. NETIF_F_TSO)
This patch adds the missing recompute when adding a device to the bridge.
Signed-off-by: NOlaf Rempel <razzor@kopf-tisch.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This fixes the RCU race on bridge delete interface.  Basically,
the network device has to be detached from the bridge in the first
step (pre-RCU), rather than later. At that point, no more bridge traffic
will come in, and the other code will not think that network device
is part of a bridge.

This should also fix the XEN test problems.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Make features of the bridge pseudo-device be a subset of the underlying
devices.  Motivated by Xen and others who use bridging to do failover.

Signed-off-by: Catalin BOIE <catab at umrella.ro>
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!