- 23 8月, 2008 10 次提交
-
-
由 Dominik Brodowski 提交于
CS_UNSUPPORTED_MODE and CS_UNSUPPORTED_FUNCTION were mostly used to denote trying to use PCMCIA functions on CardBus cards. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
CS_OUT_OF_RESOURCE was almost only used to note -ENOMEM situations. Therefore, use -ENOMEM explicitely, and also print out warnings. CC: netdev@vger.kernel.org Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
Instead of using own error or success codes, the PCMCIA code should rely on the generic return values. Therefore, replace all occurrences of CS_SUCCESS with 0. CC: netdev@vger.kernel.org Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
With the PCMCIA ioctl being the only remaining user of _get_configuration_info, move the function to pcmcia_ioctl.c Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
Use CONFIG_PCMCIA_DEBUG instead of DEBUG so that dev_dbg() and other tricks work properly. (includes bugfixes from and Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> ) Signed-off-by: NDominik Broodwski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
(includes bugfix from and Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> ) Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
By passing the current Vcc setting to the pcmcia_config_loop callback function, we can remove pcmcia_get_configuration_info() calls from many drivers. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
Many drivers use the default CIS entry within their pcmcia_config_loop() callback function. Therefore, factor the default CIS entry handling out. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
Almost all drivers set p_dev->conf.ConfigIndex to cfg->index in the pcmcia_config_loop() callback function. Therefore, factor it out. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
By calling pcmcia_loop_config(), a pcmcia driver can iterate over all available configuration options. During a driver's probe() phase, one doesn't need to use pcmcia_get_{first,next}_tuple, pcmcia_get_tuple_data and pcmcia_parse_tuple directly in most if not all cases. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
- 24 6月, 2008 5 次提交
-
-
由 Dominik Brodowski 提交于
Except for one debug message in a driver marked BROKEN, pcmcia_get_status is only used by the ioctl. Therefore, move it to pcmcia_ioctl.c and unexport it. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Adrian Bunk 提交于
IN_CARD_SERVICES was #define'd but not used, so let's remove it. Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Magnus Damm 提交于
The code in include/pcmcia/bulkmem.h was only kept for compatibility reasons. Therefore, move the remaining region_info_t definition to ds.h [linux@dominikbrodowski.net: do not modify the IOCTL, move definition to ds.h, and update changelog] Signed-off-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Alan Cox 提交于
Nowdays you can ask for an IRQ to be allocated but not enabled, when PCMCIA was written this was not true and this feature is thus not used [linux@dominikbrodowski.net: add comment and ifdef to avoid compilation breakage at least on alpha] Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
Bug noted by Michael Buesch: checking for the pointer address is always true. This didn't matter much, for the very first check in pcmcia_release_window() was for the pointer pointing to something, and the return value is ignored here. Nonetheless, fix it. CC: Michael Buesch <mb@bu3sch.de> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
- 06 2月, 2008 1 次提交
-
-
由 Olof Johansson 提交于
Convert the io_req_t members to unsigned int, to allow use on machines with more than 16 bits worth of IO ports (i.e. secondary busses on ppc64, etc). There was only a couple of places in drivers where a change was needed. I left printk formats alone (there are lots of %04x-style formats in there), mostly to not change the format on the platforms that only have 16-bit io addresses, but also because the padding doesn't really add all that much value most of the time. I found only one sprintf of an address, and upsized the string accordingly (I doubt anyone will have anywhere near INT_MAX as irq value, but at least there's room for it now). Signed-off-by: NOlof Johansson <olof@lixom.net> Cc: Christoph Hellwig <hch@lst.de> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 08 2月, 2007 1 次提交
-
-
由 Greg Kroah-Hartman 提交于
Converts from using struct "class_device" to "struct device" making everything show up properly in /sys/devices/ with symlinks from the /sys/class directory. Cc: <linux-pcmcia@lists.infradead.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 26 10月, 2006 1 次提交
-
-
由 Kaustav Majumdar 提交于
Some PCMCIA cards do not mention specific IO addresses in the CIS. In that case, inside the alloc_io_space function, conflicts are detected (the function returns 1) for the second function of a multifunction card unless the length of IO address range required is greater than 0x100. The following patch will remove this conflict checking for a PCMCIA function which had not mentioned any specific IO address to be mapped from. The patch is tested for Linux kernel 2.6.15.4 and works fine in the above case and is as suggested by Dave Hinds. Signed-off-by: NKaustav Majumdar <kaustav.majumdar@wipro.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
- 05 10月, 2006 1 次提交
-
-
由 David Howells 提交于
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: NDavid Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
-
- 01 8月, 2006 1 次提交
-
-
由 Daniel Ritz 提交于
Values displayed when by cardctl config are horribly wrong for 16bit cards. this fixes it up by not using memcpy() since source and target struct are very different. Signed-off-by: NDaniel Ritz <daniel.ritz@gmx.ch> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 03 7月, 2006 1 次提交
-
-
由 Thomas Gleixner 提交于
Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 01 7月, 2006 1 次提交
-
-
由 Alan Cox 提交于
The patch below cleans up the pcmcia code a bit on the IRQ side (I did this while debugging the problem just so I could read wtf it was doing), and also adds a warning and passes back the correct information when a device asks for exclusive but gets given shared. This at least means the dmesg dump of a problem triggered by this will have a signature to find. Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
- 22 4月, 2006 3 次提交
-
-
由 Daniel Ritz 提交于
Using the old ioctl interface together with cardbus card gives a NULL pointer dereference since cardbus devices don't have a struct pcmcia_device. also s->io[0].res can be NULL as well. Fix is to move the pcmcia code after the cardbus code and to check for a null pointer. Signed-off-by: NDaniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
As static maps do not have IO resources, this setting oopses. However, as we do not ever read this value, we can safely remove it. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
If we set dev_node to NULL too early, some drivers which used this to determine whether unregister_netdev() needs to be called fail when removing a PCMCIA card. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
- 31 3月, 2006 13 次提交
-
-
由 Dominik Brodowski 提交于
Instead of the two status values struct pcmcia_device->p_state and state, use descriptive bitfields. Most value-checking in drivers was invalid, as the core now only calls the ->remove() (a.k.a. detach) function in case the attachement _and_ configuration was successful. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Adrian Bunk 提交于
We can now make pcmcia_release_{io,irq} static. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
Embed dev_link_t into struct pcmcia_device(), as they basically address the same entity. The actual contents of dev_link_t will be cleaned up step by step. This patch includes a bugfix from and signed-off-by Andrew Morton. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
Rename pcmcia_device.state (which is used in very few places) to p_state in order to avoid a namespace collision when moving the deprecated dev_link_t into struct pcmcia_device Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
As we do not allow setting Vcc in the pcmcia core, and Vpp1 and Vpp2 can only be set to the same value, a lot of code can be streamlined. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
Handle the _modifying_ operation sm91c92_cs requires in pcmcia_modify_configuration, so that the only remaining users of pcmcia_release_configuration() are within the pcmcia core module. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
Convert the remaining drivers which use pcmcia_release_io or pcmcia_release_irq, and remove the EXPORT of these symbols. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
pcmcia_disable_device(struct pcmcia_device *p_dev) performs the necessary cleanups upon device or driver removal: it calls the appropriate pcmcia_release_* functions, and can replace (most) of the current drivers' _release() functions. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
BasePort, NumPorts and Attributes are or can be embedded in struct resource, so remove them. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
Remove the inclusion of include/config.h as it isn't needed any longer. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
Update the remaining users using the static lookup table of the PCMCIA function configuration to use the struct pcmcia_device-contained pointer. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
Access the PCMCIA config_t struct (one per device function) using a pointer in struct pcmcia_device, instead of looking them up in an array. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
config_t.Present is set to the same value as CardValues, which isn't modified anywhere. Therefore, we can use only one of these two objects. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
- 10 9月, 2005 2 次提交
-
-
由 Brice Goglin 提交于
Add a devname parameter to the pcmcia_device structure, fills it with "pcmcia<bus_id>" in pcmcia_device_add, and passes it to request_irq in pcmcia_request_irq. Signed-off-by: NBrice Goglin <Brice.Goglin@ens-lyon.org> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Dominik Brodowski 提交于
config_t->Vpp1, Vpp2 and Vcc are never read, so remove them. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-