That's very easy using the infrastructure enabled earlier for MCE_INTEL

Untested.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Enable the 64bit MCE_INTEL code (CMCI, thermal interrupts) for 32bit NEW_MCE.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

The 64bit machine check code is in many ways much better than
the 32bit machine check code: it is more specification compliant,
is cleaner, only has a single code base versus one per CPU,
has better infrastructure for recovery, has a cleaner way to communicate
with user space etc. etc.

Use the 64bit code for 32bit too.

This is the second attempt to do this. There was one a couple of years
ago to unify this code for 32bit and 64bit.  Back then this ran into some
trouble with K7s and was reverted.

I believe this time the K7 problems (and some others) are addressed.
I went over the old handlers and was very careful to retain
all quirks.

But of course this needs a lot of testing on old systems. On newer
64bit capable systems I don't expect much problems because they have been
already tested with the 64bit kernel.

I made this a CONFIG for now that still allows to select the old
machine check code. This is mostly to make testing easier,
if someone runs into a problem we can ask them to try
with the CONFIG switched.

The new code is default y for more coverage.

Once there is confidence the 64bit code works well on older hardware
too the CONFIG_X86_OLD_MCE and the associated code can be easily
removed.

This causes a behaviour change for 32bit installations. They now
have to install the mcelog package to be able to log
corrected machine checks.

The 64bit machine check code only handles CPUs which support the
standard Intel machine check architecture described in the IA32 SDM.
The 32bit code has special support for some older CPUs which
have non standard machine check architectures, in particular
WinChip C3 and Intel P5.  I made those a separate CONFIG option
and kept them for now. The WinChip variant could be probably
removed without too much pain, it doesn't really do anything
interesting. P5 is also disabled by default (like it
was before) because many motherboards have it miswired, but
according to Alan Cox a few embedded setups use that one.

Forward ported/heavily changed version of old patch, original patch
included review/fixes from Thomas Gleixner, Bert Wesarg.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

First 32bit doesn't have oops_begin, so it's a barrier of using
this code on 32bit.

On closer examination it turns out oops_begin is not
a good idea in a machine check panic anyways. All oops_begin
does it so check for recursive/parallel oopses and implement the
"wait on oops" heuristic. But there's actually no good reason
to lock machine checks against oopses or prevent them
from recursion. Also "wait on oops" does not really make
sense for a machine check too.

Replace it with a manual bust_spinlocks/console_verbose.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

i386 has no idle notifiers, but the 64bit machine check
code uses them to wake up mcelog from a fatal machine check
exception.

For corrected machine checks found by the poller or
threshold interrupts going through an idle notifier is not needed
because the wake_up can is just done directly and doesn't
need the idle notifier. It is only needed for logging
exceptions.

To be honest I never liked the idle notifier even though I signed
off on it. On closer investigation the code actually turned out
to be nearly. Right now machine check exceptions on x86 are always
unrecoverable (lead to panic due to PCC), which means we never execute
the idle notifier path.

The only exception is the somewhat weird tolerant==3 case, which
ignores PCC. I'll fix this in a future patch in a much cleaner way.

So remove the "mcelog wakeup through idle notifier" code
from 64bit.

This allows to compile the 64bit machine check handler on 32bit
which doesn't have idle notifiers.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

It's the same function, so let's share it.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Give it the same name as on 32bit. This makes further merging easier.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Allows to call different machine check handlers from the low
level machine check entry vector.

This is needed for later when it will be used for 32bit too.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Various K7 have broken bank 0s. Don't enable it by default

Port from the 32bit code.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Quoting the comment:

* SDM documents that on family 6 bank 0 should not be written
* because it aliases to another special BIOS controlled
* register.
* But it's not aliased anymore on model 0x1a+
* Don't ignore bank 0 completely because there could be a valid
* event later, merely don't write CTL0.

This is mostly a port on the 32bit code, except that 32bit
always didn't write it and didn't have the 0x1a heuristic. I checked
with the CPU designers that the quirk is not required starting with
this model.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Replace unsigned long with u64s if they need to contain 64bit values.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Decode more magic constants and turn them into symbols.

[ Sort definitions bitwise, introduce MCG_EXT_CNT - HS ]
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Decode magic constants and turn them into symbols.

[ Cleanup to use symbols already exists - HS ]

[ Impact: cleanup ]
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

The number of MCE banks supported by a CPU is a useful number to know,
so print it out during CPU initialization.

[ Impact: add printout ]
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Shorten variable names. This also compacts the code a bit.

	device_mce		=> mce_dev
	mce_device_initialized	=> mce_dev_initialized
	mce_attribute		=> mce_attrs

[ Impact: cleanup ]
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

move mce_64.c => mce.c and glue it up in the Makefile.
Remove mce_32.c
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Prepare the 64-bit mce_64.c code side to be built on 32-bit.

[ includes ifdef relocation by Andi Kleen ]
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Cc: Andi Kleen <ak@firstfloor.org>
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Move current 32-bit mce_32.c code into mce_64.c.

[ Remove unused artifact stop/restart_mce pointed by Andi Kleen ]
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Cc: Andi Kleen <ak@firstfloor.org>
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Prepare mce.h for unification, so that it will build on 32-bit x86
kernels too.

[ Impact: cleanup ]
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Mechanic unification. No change in code.

[ Impact: cleanup, 32-bit / 64-bit unification ]
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Prepare for unification, make two intel_init_thermal equal.

[ Impact: cleanup ]
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Make the coding style match that of the rest of the x86 arch code.

[ Impact: cleanup ]
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Make the coding style match that of the rest of the x86 arch code.

[ Impact: cleanup ]
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Make the coding style match that of the rest of the x86 arch code.

[ Impact: cleanup ]
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Make the coding style match that of the rest of the x86 arch code.

[ Impact: cleanup ]
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Make the coding style match that of the rest of the x86 arch code.

[ Impact: cleanup ]
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Make the coding style match that of the rest of the x86 arch code.

[ Impact: cleanup ]
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Make the coding style match that of the rest of the x86 arch code.

[ Impact: cleanup ]
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Make the coding style match that of the rest of the x86 arch code.

[ Impact: cleanup ]
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Make the coding style match that of the rest of the x86 arch code.

[ Impact: cleanup ]
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

This file has been modified many times along the years, by multiple
authors, so the general style and structure has diverged in a number
of areas making this file hard to read.

So fix the coding style match that of the rest of the x86 arch code.

[ Impact: cleanup ]
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

- Fix the comment formatting.

- The error path does not return 0, and printk lacks level and "\n".

- Move __setup("nomce") next to mcheck_disable().

- Improve readability etc.

[ Impact: cleanup ]
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Acked-by: NAndi Kleen <ak@linux.intel.com>
LKML-Reference: <49CB3F38.7090703@jp.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

The implementation we just revived has issues, such as using a
Kconfig-defined virtual address area in kernel space that nothing
actually carves out (and thus will overlap whatever is there),
or having some dependencies on being self contained in a single
PTE page which adds unnecessary constraints on the kernel virtual
address space.

This fixes it by using more classic PTE accessors and automatically
locating the area for consistent memory, carving an appropriate hole
in the kernel virtual address space, leaving only the size of that
area as a Kconfig option. It also brings some dma-mask related fixes
from the ARM implementation which was almost identical initially but
grew its own fixes.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Make FIXADDR_TOP a compile time constant and cleanup a
couple of definitions relative to the layout of the kernel
address space on ppc32. We also print out that layout at
boot time for debugging purposes.

This is a pre-requisite for properly fixing non-coherent
DMA allocactions.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

(pre-requisite to make the next patches more palatable)
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Fix some more fallout of the string changes:

  CC      arch/blackfin/lib/strncmp.o
In file included from include/linux/bitmap.h:9,
                 from include/linux/nodemask.h:90,
                 from include/linux/mmzone.h:17,
                 from include/linux/gfp.h:5,
                 from include/linux/kmod.h:23,
                 from include/linux/module.h:14,
                 from arch/blackfin/lib/strncmp.c:14:
include/linux/string.h: In function ‘strstarts’:
include/linux/string.h:132: error: implicit declaration of function ‘strncmp’
make[1]: *** [arch/blackfin/lib/strncmp.o] Error 1
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
CC: Rusty Russell <rusty@rustcorp.com.au>

We don't create a include/asm/mach/ symlink anymore, so we don't need the
.gitignore for it.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Signed-off-by: NMike Frysinger <vapier@gentoo.org>

This reverts commit 33f00dce.

    While it was a good idea to try to use the mm/vmalloc.c allocator instead
    of our own (in fact, ours is itself a dup on an old variant of the vmalloc
    one), unfortunately, the approach is terminally busted since
    dma_alloc_coherent() can be called at interrupt time or in atomic contexts
    and there's little chances we'll make the code in mm/vmalloc.c cope with\       that :-(

    Until we can get the generic code to forbid that idiocy and fix all
    drivers abusing it, we pretty much have no choice but revert to
    our custom virtual space allocator.

    There's also a problem with SMP safety since freeing such mapping
    would require an IPI which cannot be done at interrupt time.

    However, right now, I don't think we support any platform that is
    both SMP and has non-coherent DMA (don't laugh, I know such things
    do exist !) so we can sort that out later.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>